IkeliteメーカーSLR-DC Housing D700の使用説明書/サービス説明書
ページ先へ移動 of 28
Port Lock IKELITE Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product.
T able of Contents Product Registration ........................................................P . 3 Package Contents ......................................................P . 3 Preparation ............................................................
- SLR-DC Housing - Envelope containing tray installation hardware, maintenance kit, and extra control end tips. Package Contents - Aluminum T ray & Dual Handles - Silicone Lubricant - Std.
4 Port Lock IKELITE Parts of the Housing - Front V iew Flash Quick Release Strobe Arm Mount Handle Port Opening Gear Sleeve Drive Gear Sub- command Dial Fn Button Shutter Release Lid Snap Side V iew G.
5 1 10 6 7 8 1 2 9 1 1 1 3 1 6 1 5 2 4 5 3 1 4 17 1 8 TTL 1 -1 -1 F -2 -3 MAN Back V iew Lens Release Button Release Mode Dial V iewfinder Port 1. External Strobe Connector & Cap 2. Playback Button 3. Delete Button 4. Menu Button 5. Protect Button 6.
Opening the Housing Lid Snaps have a Lock . T o open, push Lid Snap Lock forward and lift as shown. Keep pressure on the Lid Snap so it does not fly open quickly . Lid Snaps have a lot of spring tension once they go over center , so have a firm grip on the Lid Snap.
7 Attaching Camera to Camera T ray Remove the back from the housing. The mounting tray for the camera is secured to the housing back. Position the camera and lens on the camera tray , and then secure it with the mounting bolt which threads into the camera’ s tripod socket.
8 Attaching the Flash Connection for External Strobes When us ing an ex tern al strobe , co nne ct the hou sin g ho tsh oe connect or . Slid e t he connec tor into the ho tsho e m ount on the c amer a f rom the ba ck of the ca mera as sho wn. Slide the co nnec tor forwa rd until it sto ps.
Closing the Housing 1. Place housing face down in your lap. 2. Check to see that there is an o-ring on the housing back that is clean and in its proper location. 3. Guide the back onto the housing. The o-ring should touch the housing all the way around.
Preparing to Install Zoom Clamp & Gear Sleeve Determine the type of lens being used on the camera. T ype 1 Lenses have a lens opening that is NOT larger in diameter than the zoom ring. (Fig. 1) . T ype 2 Lenses have a lens opening that IS larger in diameter than the zoom ring.
I n s t a ll in g th e Zo om C la mp & G ea r Sl ee ve O n th e T yp e 1 L e n s e s The Zoom Clamp has springs so it can be expanded to fit over the Zoom Ring of the lens - figure C, page 1 1. Install the Zoom Clamp with the extension tabs toward the rear element of the lens.
12 Figure D Figure E Align Ribs with Zoom Clamp grooved tabs apply rubber strips to inside of clamp Figure F T y p e 1 L en se s (c on t. ) Gear Sleeve Ribs.
T OP OF HOUSING Installing the Zoom Clamp & Gear Sleeve On T ype 2 Lenses Due to the larger diameter lens opening on T ype 2 lenses, the Zoom Clamp and Gear Sleeve need to be installed from the rear (bayonet end) of the lens.
Manual Focusing Note: Ikelite DSLR housings are designed for auto-focus DSLR cameras and lenses. Manual focusing is not recommended. In some cases, if you desire to manually focus a lens, the zoom clamp must be moved onto the lens Manual Focus Ring and you must use the housing zoom control knob to manually focus.
15 Installing the Port There are four port locks on the front of the housing, see figure G, page 14. Each port lock has a Release Button. Lift the release button and slide each Port Lock away from the port opening. In the unlocked position, the Release Button will remain in the up position as shown.
16 Installing the Port (cont.) T o Remove Port T o remove the port, lift up on each Release Button and slide the port lock away from the port. Port Seal Inside V iew If the port is installed before the camera is inserted into the housing, look from the inside of the housing at the port seal.
17 Housing Conversion Circuitry This housing has Conversion Circuitry built into the housing. When used with Ikelite DS Substrobes the Conversion Circuitry provides real Nikon iTTL flash exposure with over and under-exposure compensation from +1 1/3 to - 1 1/3 f-stops in 1/3 stop increments.
18 Using Non-Ikelite or Ikelite Non-DS Substrobes (Substrobe 50, 100A, 200, 400) with this Housing Th e Con ver si on Circ uit ry i s au tom at ic ally di sa bl ed whe n use d wit h a No n- Ikel ite o r Non -DS S ub st rob e.
19 Pre-Dive Y our System It is recommended that you take the complete system into a swimming pool before use in open water . This will give you a chance to become familiar with the handling and operation of your housing and strobe(s). As soon as you enter the water , take a moment and check the housing to see that it is properly sealed.
20 T roubleshooting Push buttons or controls are sticky and hard to operate - Remove the camera and rinse the closed housing in fresh water . V igorously press each push button in and out several times to release any trapped saltwater or debris.
21 Camera does not take a picture - Install a fully charged battery . - A housing control is engaging a camera function and will not allow the shutter to fire. - There is not enough available light for the camera to properly focus. Add a focusing light or strobe with a built-in focusing light to your system.
22 Recommended Accessories A full range of accessories is available to support your housing. Please visit http://www .ikelite.com/web_two/nik_d700.html to see the most current information about recommended accessories. Replacement Parts 0132.61 Spare Main Housing O-ring 0105 Spare Port-to-Housing O-ring 5020 Silicone Lubricant in 4 1cc T ubes 5512.
23 Control Maintenance Ikelite controls are designed to provide years of reliable service with minimal maintenance. - Push button controls require no maintenance other than rinsing in fresh water after saltwater use. If a push button control becomes dif ficult to push or if it sticks when depressed, soak the housing in luke warm fresh water .
24 Housing Lubricate Shaft Pull out to expose shaft Diagram B Loosen set screw (allen wrench required) T ighten set screw down against this flat area when replacing the knob.
25 Housing Maintenance Y our Ikelite Housing should be given the same care and attention as your other photographic equipment. In addition to normal maintenance, we recommend your housing be returned to Ikelite (every 2-3 years or 50 dives), to be checked and pressure tested.
26 Photo T ips - The number one rule in underwater photography is to eliminate as much water between the camera and subject as possible. Get as close as you can to the subject, then use the zoom. If you are using flash for still photos, subjects beyond 6 feet (1.
27 Email: ikelite@ikelite.com Phone 317.923.4523 Fax 317.924.7988 This Ikelite product is warranted against any manufacturing defects for a period of one year from the original date of purchase. Defective products should be returned prepaid to Ikelite.
6812.7_Nikon D700_02-071 1 28 R et u rn i ng P r od u ct s f o r S er vi c e ( ou ts i de t he U n it e d St a t es ) For the separate international customs documentation form that you complete to acc.
デバイスIkelite SLR-DC Housing D700の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Ikelite SLR-DC Housing D700をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIkelite SLR-DC Housing D700の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ikelite SLR-DC Housing D700の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ikelite SLR-DC Housing D700で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ikelite SLR-DC Housing D700を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIkelite SLR-DC Housing D700の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ikelite SLR-DC Housing D700に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIkelite SLR-DC Housing D700デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
