ImpexメーカーMACH Vの使用説明書/サービス説明書
ページ先へ移動 of 29
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Pack Assembly Instruc tion Parts L ist Resistance Chart Warranty Ordering Parts Model MACH V Retain This Manual for Reference 08-26-03 OWNER'S MANUAL MARCY MAGNUM V HOME GYM IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE...................................................................... 2 HARDW ARE PACK…….......….
IM PORTA NT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assembl e or operate y our machine.
HA RDWA RE PA CK 3.
HA RDWA RE PA CK 4.
HA RDWA RE PA CK 5.
HA RDWA RE PA CK 6.
A SSEM BLY INSTRUCTI ON Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Attach tw o Ø 2 ½” Rubber Bumpers ( #88) to the holes on the Mai n Base Frame (#1).
STEP 2 (See Diagram 2) A.) Connect the Main Base Frame (#1) to both the Front & Rear Stabilizers (#5 & 4). Secure each end with tw o M10 x 2 ¾” Carri age Bolts ( #109), one 4 ¾” x 2” Bracket (#44), tw o ∅ ¾” W ashers (#124), and tw o M10 Aircraft Nuts (#128).
STEP 3 (See Diagram 3) A.) Pl ace the Swi vel Fr ame (#11) onto the ax le on the Main Base Frame (#1). Secur e it wi th one M10 x ¾ ” Allen Bolt (#120) and Ø ¾ ” W asher (#124). B.) Attach the Foot Suppor t (#12) to the Mai n Base Frame. Attach the 4” x 2” Bracket (#42) to the opposite side on the Mai n Base Frame.
STEP 4 (See Diagram 4) A.) Attach the Butter fly Support Fr ame (#15) to the front of the Front Vertic al Beam (#7). Attach the Butterfly Pull ey Suppor t (#16) to the back of the Front Vertic al Beam (#7). Al ign the hol es and secure them wi th two M 10 x 3 ¾ ” Carr iage Bol ts (#107), ∅ ¾” W ashers (#124), and M10 Ai rcraft Nuts (#128).
STEP 5 (See Diagram 5) A.) Instal l 19 W eight Plates (#58). To install the plates, hold the plate at an ang le and place between the two Guide R ods (#10) then dr op it dow n. Make sure the gr ooves on the pl astic cover s all face up. The plates should all interlock w ith each other.
STEP6 (See Diagram 6) A.) Attach the Bench Pr ess Base (#14) to the opening on the Rear Vertical Beam ( #6). Carefully place two ∅ 1 ½” x Ø 1” W ashers (#132) in betw een the Base and the Rear Vertical Beam. Ali gn the holes and insert a 9” Axle ( #32).
STEP 7 (See Diagram 7) A.) Slide the Sli ding Block ( #37) onto the Main Seat Suppor t (#2). Thread a Lock Knob (#87) into the hole on the Sliding Block to hold it in position. B.) Attach the rear end of Main Seat Support ( #2) to the open bracket on the Fr ont Vertical Beam (#7).
STEP 8 (See Diagram 8) A.) Attach Backrest Board (#48) to the Front Vertic al Beam (#7). Secur e it w ith two M 8 x 3 3/8” Allen Bolts ( #115) and Ø 5/8” W ashers (#125). B.) Attach the Adjustable Backrest Board ( #49) to the Backrest Suppor ts (#25).
STEP 9 (See Diagram 9) A.) Attach the two W eight Stack Cov ers (#39) to the Top Socket Assembly (#9) and Main Base Frame (#1). Secur e each Cover wi th two M10 x ¾” Allen Bolts ( #120) and Ø ¾” W ashers (#124).
16.
STEP 10 (See Cable Loop Diagram & Diagram 10) A.) Attach one end of the 143” Butterf ly Cable (#56) to the Clip on the Butterfly Pulley Bracket (#17) on the right si de. Draw the Cable to the Butterfly Pulley Support (#16). B.) Attach a Pulley (#66) to the open bracket.
STEP 11 (See Cable Loop Diagram & Diagram 11) A.) Attach the 118” Upper Cabl e (#52) to the front opening on the Upper Frame (#8). Attach a Pulley to the opening. Secur e the Pulley wi th one M10 x 2 ½ ” Allen Bolt (#117), tw o Ø 7/8” Pulley Bushings ( #70), and one M10 Ai rcraft Nut (#128) .
DIAGRAM 11 19.
STEP 12 (See Cable Loop Diagram & Diagram 12) A.) Attach the Bal l-end of the 163” AB Cabl e (#55) to the opening on the Front Vertical Beam (#7). Attach a Pull ey to the opening . Secure it with one M10 x 2 ½” Allen Bolt (#117), tw o Ø 7/8” Pulley Bushing s (#70), and one M 10 Aircr aft Nut (#128).
DIAGRAM 12 21.
STEP 13 (See Cable Loop Diagram & Diagram 13) A.) Attach one end of the 78” Bench Press Cable (#54) to a Sing le Floating Pulley Bracket (#35). Secure it w ith one M10 x 1” All en Bolt (#114), tw o Ø ¾” W ashers (#124), and one M10 Aircr a f t Nut (#128).
STEP 14 (See Cable Loop Diagram & Diagram 14) A.) Attach the 163” Lower Cable (#53) to the Swivel Fr ame (#11). B.) Instal l a Pulley to the bracket on the Swiv el Frame w ith one M10 x 1 ¾” Al len Bolt (#113), tw o Ø ¾” W ashers (#124), one L-shaped Br acket (#46) and one M 10 Aircraft Nut (#128).
24.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Base F ram e 1 2 Main Seat Support 1 3 Front Suppor t Fram e 1 4 Rear Stabilizer 1 5 Front Stabilizer 1 6 Rear Ver tical Beam 1 7 Front Ver tical Beam 1 8 .
110 M10 x 7 ¼” Hex Bolt 1 4 111 M6 x 1 5/8” Hex Bolt 2 112 M6 x 1 3/8” Hex Bolt 4 113 M10 x 1 ¾” Allen Bolt 17 114 M10 x 1” Allen Bolt 4 115 M8 x 3 3/8” Allen Bolt 2 116 M10 x 3” Allen.
MACH IV WEIGHT RESISTANCE CHART * Numbers are approximat e. A ct ual w eights may vary. * Values for But terfly are for each arm. 27 Plate Arm Curl Low Pulley High Pulley Butterfly AB Station Bench Pr.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be f ree from def ects in work m ans hip and m aterial, under norm al use and s ervic e conditions , f or a per iod of two years on the F ram e f r om the date of purchase.
デバイスImpex MACH Vの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Impex MACH Vをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはImpex MACH Vの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Impex MACH Vの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Impex MACH Vで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Impex MACH Vを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はImpex MACH Vの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Impex MACH Vに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちImpex MACH Vデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
