ImpexメーカーMWB-4360の使用説明書/サービス説明書
ページ先へ移動 of 33
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MWB-4360 Retain This Manual for Reference 07-14-06 OWNER'S MANUAL MARCY ® SMITH MACHINE MWB-4360 IMPEX ® INC.
TA BLE OF CONTENTS BEFORE YOU BEGIN..................................................................……………. 1 IMPORTANT SAFETY NOTICES.................................................................… 2 SMITH MACHINE HARDW ARE PACK….....
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
WA RNI NG LABEL PLA CEMENT The w arning labels show n here have been placed on the Rear Base, Rear Stabiliz er, and Upper Frame. If the labels are missing or illegible, please call customer serv ice at 1-800-888- 8899 for replacements. A pply the labels in the location s hown.
SMITH MA CHINE HA RDWA RE PA CK 4.
SMITH MA CHINE HA RDWA RE PA CK 5.
SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach a Fr ont Vertical Frame (#3) to the R ight Base Frame ( #1). Secure it w ith two M10 x 3” Carr iage Bolt s (#76), one 5 1/8” x 2 ¾” Bracket (#34), tw o Ø ¾” W ashers (#66), and two M10 Ai rcraft Nuts (#86) .
DIAGRAM 2 8.
STEP 3 (See Diagram 3) A.) Attach the R ear Vertic al Beam (#6) to the top of the Cross Br ace (#2). Attach the W eight Glide Base (#8) to the Cross Brace from the Bottom. Ali gn the holes. Secur e them wi th two M 10 x 3” C arriag e Bolts (#76), Ø ¾” W ashers (#66), and M10 Air craft Nuts (#86).
STEP 4 (See Diagram 4) A.) Attach the W eight Gli de Post (#7) onto the W eight Glide Base (#8) . Secure it w ith f our M10 x 1” C arriag e Bolts (#74), Ø ¾” W ashers (#66) and M10 Air craft Nuts (#86). B.) Sl ide the Slidi ng W eight Post (#14) onto the Chr o med Post from the top.
STEP 5 (See Diagram 5) A. Place the Left Upper Frame ( #94) onto the Front Top Beam (#15). Secur e it w ith two M 10 x 3 1/8” Carr iage Bolt s (#77), one 5 1/8” x 2” Bracket (#35), tw o Ø ¾” W ashers (#66), and tw o M10 Aircr aft Nuts (#86).
STEP 6 (See Diagram 6) A.) Secur ely ti ghten all N uts and Bolts prev iously installed. B.) Attach the Butter fly Base (#12) to the front of Rear Vertical Beam (#6). Attach the Butterfly Pulley Bracket (#13) to the back of the Rear Vertical Beam. Al ign the hol es.
CABLE LOOP DIAGRAM 13.
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one end of 87” Butter fly Cabl e (#42) to the cli p on Right Butter f ly (#11) . Draw the Cable to the right Sw ivel Pulley Bracket (#20).
STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Un-instal l the M10 x 1 1/8” All en Bolt (#104) and M 10 Aircr aft Nut (#86) on the U- shaped Connector on one end of the 229” Cable ( 41). Remove the U-shaped C onnector, Big W asher, and Ball Stopper from the Cable.
16.
STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach one end of the 138” Sl iding W eight Post Cabl e (#102) to the open bracket on the Sliding W eight Post (#14) . Secure it with one M10 x 1” Allen Bolt (#68), tw o Ø ¾” W ashers (#66), and one M10 Ai rcraft Nut ( #86).
DIAGRAM 9 18.
STEP 10 (See Diagram 10) A.) Attach the 59” Lower Cable (#40) to a Pulley (#57). Attach the Pull ey to the l ower openi ng on the Rear Verti cal Beam (#6) . Secure it w ith the Foot Plate (#16), one M10 x 3 3/8” Allen Bolt (#73), tw o Ø ¾” W ashers (#66), and one M 10 Aircr aft Nut (#86).
STEP 11 (See Diagram 11) A.) N OTE: Help of another person is str ongly recommended fo r this step. Place the Li fting Sleeve ( #27) in betw een the two Safety Stop Frames (#26).
EXPLODED DIAGRAM 21.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Fram e 2 55 Sliding Sleeve 8 2 Cross Br ace 1 56 Lock Ring 2 3 Front Vertic al Beam 2 57 Pulley 10 4 Left Vertic al Fram e 1 58 Ø 1 ¾” Rubber Bum per 1.
MULTI-PURPOSE BENCH HA RDWA RE PA CK 23.
MULTI-PURPOSE BENCH A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach four Bushi ngs (#27) to a Seat Support Frame (#6) . B.) Attach a Backr est Support (#7) to the rear of the Seat Support Frame (#6) . Alig n the holes and secure them w ith one M10 x 1 ¾” Al len Bolt (#37) and ∅ ¾” W asher (#42).
STEP 3 (See Diagram 3) A.) Pl ace the Backrest Board (#14) onto the Backrest Supports (#7) . Secure it with four M8 x 2” Allen Bolts ( #40) and ∅ 5/8” W ashers (#43). B.) Pl ace the Seat Pad (#13) onto the Seat Support Fr ames (#6). Secure it wi th four M8 x 2” Allen Bol ts (#40) and ∅ 5/8” W ashers (#43).
STEP 4 (See Diagram 4) A.) Attach the Leg Dev eloper (#5) to the open bracket on the Mai n Frame (#1). Secur e it w ith an Axle ( #17), tw o M10 x ¾ ” Allen Bolts (#36), and tw o ∅ ¾” W ashers (#42). B.) Insert one Foam Tube (#10) hal fway through the hol e on the Main Frame.
STEP 5 (See Diagram 5) A.) Attach the Ar m Curl Pad ( #15) to the Arm C url Stand (#4) . Secure it w ith two M8 x 5/8” Allen Bolts (#41) and tw o ∅ 5/8” W ashers (#43). Insert the Arm C url Stand into the front openi ng on the Main Frame ( #1). Use the Lock Knob to hol d the desired Arm C url heig ht.
29.
MULTI-PURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Arm Curl Stand 1 5 Leg Devel oper 1 6 Seat Support Frame 2 7 Backrest Support 2 8 Sl.
MWB-4360 WEIGHT RESISTANCE CHART Station Ratio Example Low Pulley 200% 10 lb. plate creates 20 lb. resistance Lat Pull 50% 10 lb. plate creates 5 lb. resistance Butterfly (both arms) 100% 10 lb. plate creates 10 lb. resistance Left Cross-Over 50% 10 lb.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree f rom defec ts in work m anship and m aterial, under nor ma l use and service conditions, for a period of two years on the Fram e fr om the date of purc hase.
デバイスImpex MWB-4360の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Impex MWB-4360をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはImpex MWB-4360の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Impex MWB-4360の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Impex MWB-4360で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Impex MWB-4360を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はImpex MWB-4360の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Impex MWB-4360に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちImpex MWB-4360デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
