InFocusメーカーSecure Digital (SD) & Memory Stickの使用説明書/サービス説明書
ページ先へ移動 of 46
1 Presenter-to-Go ™ Secure Digital (SD) & Memory Stick (MS) User’s Guide Includes Instructions For: • Presenter-to-Go Palm OS Presentation Application with File Creation Support on Windows 98, Millennium, 2000, XP, NT4 and Mac OS 9. • MARGI Mirror Palm OS Graphics Display Application.
2 Table of Contents 1. Introd uction ......................................................................... 4 Your Product Packag ing Contains: ......................................... 4 2. System Requirements .....................................
3 Menu: Sh ow ..................................................................... 31 Hide All, Show All .............................................................. 31 Reset Order ...................................................................
4 1. Introduction Thank you for purchasing Presenter-to-Go ™ by MARGI Systems ™ . Presenter-to-Go is available as a Secure Digital (SD) Card for Palm’s® line of personal assistants and a Memory Stick ™ (MS) for Sony ™ CLIE ™ handhelds.
5 2. System Requirements In order to completely create and display presentations using Presenter-to-Go it is necessary to have a Palm or Sony handheld, a desktop or laptop computer, and a display device. The corresponding system requirements are listed below: Handheld • A Palm handheld with Palm OS 4.
6 Fig. 3.1: Selection of Softwa re Installation Destination You will then get the following message at the end of the installation. If you wish to register the product at this time, click “Next”. If you do not wish to register the product at this time, simply uncheck the box below and then click “Next”.
7 Fig. 3.3: Setup Complete Click “Finish” and, if registration was sele cted, you will be brought to the Presenter-to-Go registration page through your internet browser.
8 Fig. 3.4: Installing the Handheld Application After you click on the “Finish” button during th e PC software install, the screen in Fig. 3.4 will appear. If you would like to install the Presenter-to-Go software on your handheld during your next HotSync, click “Yes”.
9 Fig. 3.7: Presenter-to-Go Desktop Transfer Tutorial Presentation to Handheld Select the presentation “Palm_Tutorial.pdb” from the “Presentation List” and click “Transfer”. Next time you HotSync “Palm_Tutorial” will be transferred to the handheld.
10 Fig. 3.8: Add/Remove Programs Now, you’re ready to start making your mobile presentations 4. Creating Your Presentation Presenter-to-Go presentations can be created directly from within Microsoft PowerPoint ® or from any Windows ® application that has print driver support.
11 Fig. 4.1 Typical PowerPoint Screen with Presenter-to-Go Icon Complete your PowerPoint presentation as you normally would, taking notice of the note below. Note : Presenter-to-Go does not support any slide-transitions, animation, or audio/video features available in Microsoft PowerPoint ® .
12 Fig. 4.2 Presenter-to-Go Creator dialog box The Presenter-to-Go Creator dialog box allows you to Change the name of the presentation. To change the name, simp ly change the name in the “Presentation Name” box. Press the “Create” button, to create a mobile presentation.
13 Fig. 5.3 The Presenter-to Go Desktop dialog box Your presentation will appear in the “Prese ntations List”. This list shows all the presentations that are ready to be transferred into the HotSync bin for the next HotSync operation into your handheld.
14 Note : If you have Queued a presentation but prior to HotSync decide that you don’t want that presentation, it can be removed in the Palm Desktop Application by clicking on the “Install Tool” icon, and then highlighting the file you don’t want to transfer and selecting REMOVE.
15 save the balance of the document as additional slides until all the material is presented. 2. The Presenter-to-Go Creator dialog window will appear with the name taken from the printing application in the document name box. You can rename the mobile presentation document.
16 After the presentation is Queued then, you can perform a HotSync to get the presentation into the Palm handheld. 5. Mac Software Installation/Setup This is only available to Palm-brand handheld users. Installing the Presenter-to-Go Creation Software.
17 Creating Presentations from within Microsoft PowerPoint on your desktop (or laptop): The Presenter-to-Go driver provides a button icon on the PowerPoint toolbar like the icon above. It is shown in the Fig. 6.1, and can be found at the far right of the toolbar.
18 1. Conversion of PowerPoint file into the compressed mobile presentation format. The Presenter-to-Go “Presentation Name” will be pre-filled with the same name as the PowerPoint file. 2. The “Presenter-to-Go Creator” dialog box will appear, as shown in Fig.
19 Fig. 6.3 Presenter-to-Go Archive List Clicking on the “Create” bu tton will now append the current mobile presenta tion to the existing presentation listed on the “Append pages to existing presentation” line. Documents previou sly transferred to the Palm are saved in the Pre senter-to-Go Archive List.
20 Fig. 6.4 The Presenter-to Go Desktop dialog box Your presentation will appear in the” Presentations” list. This list shows a ll the presentations that ar e ready to be transferred into the HotSync bin for the next HotSync operation into your Palm.
21 Note : If you have Queued a presentation but prior to HotSync decide that you don’t want that presentation, it can be removed in the Palm Desktop Application by clicking on the Install icon, and then highlighting the file you don’t want to transfer and selecting REMOVE.
22 Fig. 6.6 ”Presenter-to-Go” Cr eator with new document Name After the name is entered, and the Create button is selected OR the new pages are Appended to another presentation, the familiar “Presenter-to-Go Desktop” dialog box will appear. The commands and features of this window are discussed in detail above.
23 8. Using Presenter-to-Go Follow the procedure below to use the Presenter-to-Go Application on your handheld. Step 1 Plug the A/C adapter into the wall socket and push its jack into the power connector located on the back end of the VGA connector.
24 Module Status If you have opened the Presenter-to-Go Application without the module installed and powered you will get the “Presenter module not detected” Screen.
25 Fig. 8.7 Show/Hide Slide Box The show-slide box, when checked means that the slide is visible during the presentation. The show-slide box, when unchecked means that the slide is hidden and will be skipped during the presentation.
26 Note : Slide notes and text content of slides created in PowerPoint will automatically be copied and placed in the Slide Note field. Viewing Slide Thumbnails You can preview your slides on your handheld device using the “Preview” button. Using this feature allows you to see a thumbnail of the slide itself.
27 Drag & Drop Reorganization You can reorganize the order of slides by simply selecting a slide, and dragging & dropping it at an appropriate place. Following is an example; wherein the “Before you begin…” slide has been moved down from second to seventh position.
28 handheld. When you look at the Presentation List again, this presentation will now have a dash next to it. If you remove the memory card and plug in the Presenter-to-Go Card you will still be able to use this presentation from the memory card. Fig.
29 MOVE function Moves the active presentation between the handheld’s memory and a memory card. The destination for MOVE is the handheld memory if the source is a memory card, and vice- versa. Fig. 8.17 Move Presentation COPY function Copies active presentation between the handheld’s memory and a memory card.
30 DELETE function Deletes the active presentation. Fig. 8.19 Delete Presentation Warning : Do not use the delete function of the Palm Operating System to delete presentations. Although you may highlight on e presentation, it will erase all presentations stored in the handheld.
31 Note : Beam preference must be switched ON for the receiving handheld to start accepting the document. Menu: Show The Show Menu has the choices as shown below: Fig. 8.21 Show Menu Hide All, Show All Hide All (Command-H), will uncheck the show -box on all slides.
32 Menu: Options The Options Menu has the choices as shown below: Fig. 8.22 Options Menu Preferences Fig. 8.23 Preferences • “Auto Slide Show” needs settings for automatic transitions between slides. The timing can be set from 1 to 999 seconds. If the time is set to 000, then the next slide is shown as soon as it is ready.
33 About This is the best way to see the version number of your Presenter-to-Go software. Making a Presentation Manual slide show presentation mode is the default. The physical Up and Down keys on the Handheld are tied to the keys in this mode. Pushing this button displays the previous slide.
34 The following control choices are available: REV Reverse or back one slide. FWD Forward or advance one slide. AUTO Set the presentation in AUTO slide- show mode. If in Preferences the presentation is set to enable LOOP, then the presentation will run continuously.
35 • Go to the Pricing sheet of the Product (e.g. Microsoft Excel®), and “print” to the Presenter-to-Go printer. On your Windows-Compatible computer, click on the “Sales_Prezo” in the Presentations-List, and press the APPEND button and the Pricing Sheet is now appended to the “Sales_Prezo”.
36 10. MARGI Mirror Introduction This part of the guide contains information on how to use the MARGI Mirror™ application with the MARGI Presenter-to-Go™ SD and MS Modules. The MARGI Mirror application allows the Presenter-to-Go card to display the contents of the handhelds LCD on a VGA projector or monitor.
37 Fig. 11.2: Module Missing Screen Fig. 11.3: MARGI Mirror Main Menu Video Select “Enable” to turn on the output VGA si gnals. When you are done using this feature, select “Disable”.
38 Update Refers to the rate of update of the video display. A faster display update is at the cost of increased CPU overhead. Update Speed Percentage of CPU Used Slow 5-10% Medium 10-20% Fast 20-30% Typing and game play can be comfortably done at “Medium”.
39 Information Screen Tapping on the “Module Info” button will give you the MARGI Mirror information screen. This screen will tell you version of MARGI Mirror you are using and tell you whether a display is detected using EDID or not. Tapping the information indicator will give you a Tip Screen that explains the plug and play function.
40 Using MARGI Mirror with an External Keyboard Since MARGI Mirror essentially provides a display function, a natural evolution is to attach an external keyboard and create a “PC-Like” environment.
41 Q Will I get color slides, even if my ha ndheld is a Black and White display model? A Yes, you will get 256 colors. Some pictures with thousands of shades of colors will not be as detailed, but standard graphics will look fine.
42 Q How do I remove a file from the hotsync bin? A To remove file from hotsync bin: run the Palm Desktop Install Tool (StartProgramsPalm DesktopInstall Tool) then select user then select offending file and click Remove.
43 Technical Support There are three ways to contact the MARGI Customer Service and Support: 1 Fill out the MARGI's Online Support Form by logging into http://www.margi.com/support/request_support.htm . MARGI support staff will answer these contacts with one business day, usually only a few business hours.
44 13. Specifications Presenter-to-Go Card Specifications • Dimensions (in inches) are as follows; remote is 3.5” x 1.75” x .25”, electronic component housing is 2.25” x 1.5” x .75” (SD) and 3.0” x 1.5” x .75” (MS), and cable length is 17” • Operating Voltage: 5V DC (See power options below) • Power Consumption: under 0.
45 Appendix One: Product Warranty MARGI Systems, Inc. (“MARGI”) warrants that this product will be free from defects in materials and workmanship during the warranty period, and will perform according to product documentation.
46 Appendix Two: Federal Communications Commission Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation.
デバイスInFocus Secure Digital (SD) & Memory Stickの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
InFocus Secure Digital (SD) & Memory Stickをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはInFocus Secure Digital (SD) & Memory Stickの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。InFocus Secure Digital (SD) & Memory Stickの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。InFocus Secure Digital (SD) & Memory Stickで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
InFocus Secure Digital (SD) & Memory Stickを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はInFocus Secure Digital (SD) & Memory Stickの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、InFocus Secure Digital (SD) & Memory Stickに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちInFocus Secure Digital (SD) & Memory Stickデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
