InsigniaメーカーHCC334Lの使用説明書/サービス説明書
ページ先へ移動 of 20
Document G-113077-001 – 02/07 – Rev 3 L-Series Color Camera HCC334L HCC334LX HCC484L HCC484LX HCC335LX HCC485LX User Guide NTSC PA L.
Revisions Issue Date Revisions 1.00 06/06 New document 1.01 08/0 6 Added 230V (HCC335 LX, HCC485LX). 3 02/07 Updated document part no.; added warning to p.
Rev 3 iii G-113077-001 02/07 Wa r n i n g s Installation and servicing should be performed only by qualified and experienced personnel to conform to all local codes and to maintain your warranty. WARNING! 12 VDC/ 24 VAC models require the u se of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards.
Rev 3 iv G-113077-001 02/07 FCC Compliance Statement Information to the User : This equipment has been tested and found to comply with the limits for a Class A digital device.
Rev 3 G-113077-001 02/07 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . .
Rev 3 1 G-113077-001 02/07 Introduction The Honeywell L-Series Color cameras are ideally suited for use in day-to-day surveillance applications. The L- Series cameras are designed for exceptional value and performance for everyday use.
Rev 3 2 G-113077-001 02/07 Before Y ou Begin Unpack Everything Check that the items received match those listed on the order form and packing sli p. The L-Series packing box should include, in additio.
Rev 3 3 G-113077-001 02/07 Camera Settings Camera F unctions Figure 2 Camera Rear View Legend #D e s c r i p t i o n 1 DIP switches for mode settings (see Figure 3 ) 2 Auto Iris Lens select switch, VS.
Rev 3 4 G-113077-001 02/07 Setting Up Y our Camera Figure 3 shows the factory set DIP switch settings. Automatic Gain Control ( AGC) and Auto White Balance Control (AWC) are set ON . Figure 3 Factory Set DIP Switch Settings Selecting the Lens Manual Lens Set the EE/ME DIP switch on the rear of the camera (see Figure 3 ) to EE .
Rev 3 5 G-113077-001 02/07 2. Slowly turn the LEVEL potentiometer until the picture on the monitor is as clear as possible and is not too bright. Video Drive (VSD) Lens Set the VSD/DC switch on the rear of the camera (see Figure 3 ) to VSD .
Rev 3 6 G-113077-001 02/07 Backlight Compensation (BLC) If there is excessive light (for example, a window exists in a scene), the camera tries to compensate by reducing the overall exposure, resulting in the areas surrounding the window becoming too dark.
Rev 3 7 G-113077-001 02/07 Auto White Balance Control (AWC) This mode covers a wider range of 2000°K to 10000°K and performs at a faster operati n g speed than ATW mode. This mode is typically used for outdoor applications or where variable lighting conditions exi st.
Rev 3 8 G-113077-001 02/07 Line Lock Phase Adjustment P otentiometer When the camera is in Line lock mode, it is possible to adjust the point on the AC cycle at which the camera triggers. This feature allows for synchronization of cameras that are connected to different phases.
Rev 3 9 G-113077-001 02/07 Lens Installation Adjusting the Back F ocus The back focus adjustment is accessible at the front end of the camera housing to adjust the back focal length or picture focus. The range of adju stment allo ws both C- and CS-mount lenses to be used without the need for a spacer ring.
Rev 3 10 G-113077-001 02/07 Figure 5 DC and VSD Lens Pin Defi nition 1 2 3 4 21 43 Pin DC (Direct Drive) lens Video (VSD) lens 1 CTRL - Power (+12V) 2C T R L + N C 3 DRV + Video Signal 4D R V - G N D .
Rev 3 11 G-113077-001 02/07 Completing the Installation Mounting the Camera Mounting points are provided on the top of the camera for mounting the camera on a bracket or tripod.
Rev 3 12 G-113077-001 02/07 Connecting the Camera 1. Connect the VIDEO connector on the rear of the camera to the video-in connector on your monitor. 2. Connect the camera to a power supply appropriate for your installation. HCC334L/X, HCC484L/LX: 12 VDC or 24 VA C power supply HCC335LX, HCC485LX: 230V power supply 3.
Rev 3 13 G-113077-001 02/07 W arranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty p eriod Honeywel l will repair or replace, at its sole option , free of charge, any de fective product returned prepaid.
Rev 3 14 G-113077-001 02/07 Video Output: 1 Vp-p @ 75 Ohms Sync System: Internal/Line lock S/N Ratio: > 50 dB Auto Gain Control (AGC): On (30 dB)/Off (11 dB) ALC: EE/VSD/DC Automatic Electronic Shu.
© 2007 Honeywell International Inc . All righ ts reserved. No part of this publication may be reproduced by any means without written permission f rom Honeywell Video Systems. The information in this publication is believed to be accurate in all respects.
デバイスInsignia HCC334Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Insignia HCC334Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはInsignia HCC334Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Insignia HCC334Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Insignia HCC334Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Insignia HCC334Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はInsignia HCC334Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Insignia HCC334Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちInsignia HCC334Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。