IntelメーカーSBCEGBESW1の使用説明書/サービス説明書
ページ先へ移動 of 424
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide A Guide f or System Administrato rs of Inte l® Server Product s Intel Order Nu mber D67145-00 2.
ii Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Disclaimer Inf orm ation in this document is provided in connection with Intel® prod ucts. No license, e xpress or implied, by estoppel or otherwise, to any intellectual proper ty rights is granted by this document.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide iii Safety Inf ormation Impor tant Safety Instructions Read all caution and safety statements in th is docu ment before performing any of the instructions.
iv Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Wa r n i n g s Heed safety instructions: Before working with your server product, wheth e r you are using this guide or any oth er resource as a reference, pay close attention to the safety instructions.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide v Preface About this Manu al Thank you for purchasing and using an Inte l® Blade Server Ethernet Switch Module SBCEGBESW1 or SBCEGBESW10.
vi Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Chapter 15 Port Channel Commands Chapter 16 Port Monitor Commands Chapter 17 QoS Commands Chapter 18 RMON Commands.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide vii Contents Important Safety Instructions ..................................................... ........................................... i ii Wichtige Sicherheitshinweise .
viii Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide show ports security ............................................................ ............................................... ... 37 show ports security addr esses .
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide ix shutdown ................................................... ................................................................... ....... 80 description .............
x Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Chapter 10: IP Address Commands .. ........................................................ ............ 121 ip address ..............................................
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide xi show ports monitor ............... ..................................................................................... ........ 163 Chapter 17: QoS Commands .. ...
xii Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide show rmon log ................................................................... .............................................. .. 212 rmon table-size ............
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide xiii show snmp filters ....................................................................... ...................................... .. 256 show snmp users ...........
xiv Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide logging on ................................................................................................ .................... ...... 307 logging ................
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide xv end .................................................. ......................................................................... ......... 349 help .................
xvi Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide dot1x timeout tx-period ................................. ..................................................................... 3 89 dot1x max-req .................
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 1 1 Using CLI Overview This document describes the Comm and Line In ter face (CLI) used to manage the Intel® Blade Server Ethernet Switch Modules SBCEGBESW 1 and SBCEGBESW10.
Using CLI 2 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The default host name is Conso le unless it has been changed using the hostname command in the Global Configuration mo de.
Using CLI Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 3 Configuration mode prompt consists of th e device host name followed by (c onfig) and #.
Using CLI 4 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • MAC Access-List — Configure s conditions re quired to allow traffic based on MAC addresses. The mac access-list Global Config uration mode command is used to enter the MAC access-list configuration mode.
Using CLI Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 5 There are two instances where help information can be displaye d: • Keyword lookup — The ch aracter ? is ente red in place of a command. A list of all valid commands and corresponding help messag es are is displayed.
Using CLI 6 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Nomenc lature When referring to an Ethernet port in a CLI command, the following format is used: For an E.
Using CLI Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 7 CLI Command Con ventions When entering commands there are certain command entry standards that apply to all commands. The fol lowing table describes the command convention s.
Using CLI 8 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 9 2 AAA Commands aaa authentication login The aaa authentication login Global Configu ration mode command defines login authentication. T o restore defaults, use the no form of this command.
AAA Commands 10 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines The default and optional list names created with the aaa authenti cation login command are used with the login authentication command.
AAA Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 11 Def ault Configuration If the default list is not set, only the enable passwor d is checked. This has the same effect as the co mmand aaa authentication enable default enable.
AAA Commands 12 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax login authentication { default | list-name } no login authentication Pa r a m e t e r s • default — Uses the default list created with the aaa authentication login command.
AAA Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 13 Pa r a m e t e r s • default — Uses the default list created with the aaa authentication enable command. • list-name — Uses the indicated list created with the aaa authentication enable command.
AAA Commands 14 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • method1 [ method2 ...] — Specify at least one method from the following list: Def ault Configuration The local user database is checked.
AAA Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 15 Pa r a m e t e r s • method1 [ method2 ...] — Specify at least one method from the following list: Def ault Configuration The local user database is checked.
AAA Commands 16 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
AAA Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 17 Pa r a m e t e r s • passwor d — Password for this level. (Range: 1-159 characters) • encrypted — Encrypted pas sword to be entered, copied from another device configuration.
AAA Commands 18 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration No enable password is defined. Command Mode Global Configuration mod e User Guidelines There are no user guidelines for this command.
AAA Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 19 Command Mode Global Configuration mode User Guidelines User account can be created without a password. Example The following example configures user called bob with password `lee' and user level 15 to the system.
AAA Commands 20 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 21 3 Address T able Commands bridge address The bridge address Interface Configuration (VLAN) mode command adds a MAC-layer station source address to the bridge table. T o delete the MAC address, use the no form of this command.
Address T able Commands 22 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example adds a permanent static MAC-layer station s ource address 3aa2.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 23 bridge m ulticast address The bridge multicast address Int erface Configuration (VLAN) mode comman d registers a MAC-layer multicast address in the bridge table and statically adds po rts to the group.
Address T able Commands 24 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example registers the MAC address: The following example registers the MA C address and ad ds ports statically .
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 25 Command Modes Interface Configuration (VLAN) mode User Guidelines Before defining forbid den ports, the multi cast group should be registered.
Address T able Commands 26 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Interface Configuration (VLAN) mode User Guidelines There are no user guidelines for this command. Example In this example, all multicast packets on port 1 are forwarded.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 27 User Guidelines IGMP snooping dynamically discovers multicast device ports. When a multicast device port is discovered, all th e multicast packets are forw arded to it unconditionally .
Address T able Commands 28 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example In the following example, the bridge aging time is se t to 250 seconds. c lear bridg e The clear bridge Privileged EXE C mode co mmand removes any learned entries from the forwarding database.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 29 no port security Pa r a m e t e r s • forward — Forwards packets w ith unlearned source addresses, but does not learn the address. • discard — Discards packets with unlearned source addres ses.
Address T able Commands 30 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • lock — Saves the current dynamic MAC addresses associated with the port and disables learning, relearning and aging.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 31 Def ault Configuration No addresses are defined. Command Mode Interface Configuration (Ethernet, port-channel ) mode. Cann ot be configured for a range of interfaces (range context).
Address T able Commands 32 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Privileged EXEC mode User Guidelines Internal usage VLANs (VLANs that are auto matically allocated on ports with a defined Layer 3 interface) are presented in the VLAN column by a port numbe r and not by a VLAN ID.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 33 • port-channel-num ber — A valid port-channel number . Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
Address T able Commands 34 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • interface — A valid Ethernet port. • port-channel-number — A valid p ort-channel number . Def ault Configuration This command has no default configuration.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 35 Pa r a m e t e r s • vlan-id — Indicates the VLAN ID. This has to be a valid VLAN ID value. • mac-multicast-address — A va lid MAC multicast address.
Address T able Commands 36 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide A multicast MAC address maps to multip le IP addresses as shown above. sho w bridg e m ulticast filtering The show bridge multicast filtering Priv ileged EXEC mode co mmand displays the multicast filtering configuration.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 37 Example In this example, the multicast co nfiguration for VLAN 1 is displayed. sho w por ts security The show ports security Privileged EXEC mode command displays th e port-lock status.
Address T able Commands 38 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example In this example, all classes of entrie s in the port-lock status are displayed: The following table describes the fields shown above.
Address T able Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 39 Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example This example displays dy namic addres ses in all curren tly locked ports.
Address T able Commands 40 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 41 4 A CL Commands ip access-list The ip access-list Global Configuration mode co mmand enables the IP-Access Configuration mode an d creates Layer 3 ACLs. T o delete an ACL, use the no form of this command.
A CL Commands 42 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide permit (ip) The permit IP-Access List Configuration mode co mmand permits traffic if the conditions defined in the permit statement match.
A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 43 • dscp — Indicates matching the dscp num ber with the pack et dscp val ue. • ip-pr ecedence — Indicates matching ip-preceden ce with the pack et ip-precedence value.
A CL Commands 44 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • list-of-flags — Specifies a list of TCP flags that can be triggered. If a flag is set, it is prefixed by “+”. If a flag is not set, it is prefixed by “-”.
A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 45 deny-tcp deny-udp Pa r a m e t e r s • disable-port — Specifies that the port is disabled. • sour ce — Specifies the IP address or host name from which the packet was sent.
A CL Commands 46 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • in-port port-num — ( Optional) Specifies the input port of the devise. In case of egress classification this port will be devise input port. • out-port port-num — (Optional) Specifies the output po rt of the devise.
A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 47 Syntax mac access-list name no mac access-list name Pa r a m e t e r s • name — Specifies the name of the ACL. (Range: 0-32 characters) Def ault Configuration The default for all ACLs is deny all.
A CL Commands 48 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • destination — Specifies the MAC address of the host to which the packet is being sent. • destination-wildcar d — Specifies wildcard bits to be applied to the destination MAC address.
A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 49 Pa r a m e t e r s • disable-port — Indicates that the port is di sabled if the stat ement is deny . • sour ce — Specifies the MAC address of the host from which the pac ket was sent.
A CL Commands 50 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide service-acl The service-acl Interface Configuration mode comm and applies an ACL to the input interface. T o detach an ACL fro m an input interface, use the no form of this command.
A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 51 Pa r a m e t e r s • name — The name of the ACL. Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
A CL Commands 52 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 53 5 Cloc k Commands c loc k set The clock set Privileged EXEC mode command ma nually sets the system clock.
Clock Commands 54 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide c loc k sour ce The clock source Global Co nfiguration mode command co nfigures an external time source for the system clock. Use no form of this command to disable external time sourc e.
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 55 no clock timezone Pa r a m e t e r s • hours-offset — Hours dif ference from UTC. (Range: – 12 hours to +13 ho urs) • minutes-offset — Minutes dif ference from UTC.
Clock Commands 56 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no clock summer-time r ecurring Pa r a m e t e r s • recurring — Indicates that summer time should start and end on the corresponding specified days every year .
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 57 Start: Fir st Sunday in April End: Last Sunday in October T ime: 2 am local time EU rule for daylight savings time: Start: Last Sunday in March End: Last Sunday in October T ime: 1.
Clock Commands 58 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines Multiple keys can be ge nerated. Example The following example defines th e authentication key for SNTP .
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 59 sntp trusted-ke y The sntp trusted-key Global Configuration mode comm and authenticates the identity of a system to which Simple Ne twork T ime Protocol (SNTP) will synchronize.
Clock Commands 60 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax sntp client poll timer seconds no sntp client poll timer P aramethers • seconds — Polling interval in se conds. (Range: 60-86 400) Def ault Configuration Polling interval is 1024 seconds.
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 61 Command Mode Global Configuration mode User Guidelines Use the sntp client enable (Interface) Interface Configuration mode command to enable the SNTP client on a specific interface.
Clock Commands 62 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example enables SNTP anycast clients.
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 63 sntp unicast c lient enable The sntp unicast client enable Global Configuration mo de command enables the device to use the Simple Network T ime Protocol (S NTP) to request and accept SNTP traffic from servers.
Clock Commands 64 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration Polling is disabled. Command Mode Global Configuration mod e User Guidelines Polling time is determined by the sntp client poll timer Global Configuration m ode command.
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 65 Command Mode Global Configuration mode User Guidelines Up to 8 SNTP serv ers can be defined. Use the sntp unicast client enable Global Configuration mode command to enable predefined unicast clients globally .
Clock Commands 66 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines The symbol that precedes the show cl ock display indicates the following: Example The following example displays the time and date from the system clock.
Cloc k Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 67 Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displa ys the current SNTP configuration of the device.
Clock Commands 68 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 69 6 Configuration and Ima g e File Commands cop y The copy Privileged EXEC mode command copi es files from a source to a destination.
Configuratio n and Image File Commands 70 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines The location of a file system dictates the format of the source or destination UR L.
Configur ation and Image File Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 71 T o load a configur ation file from a network se rver to the runni ng conf iguration file of the device, enter the copy s our ce-url running-config command.
Configuratio n and Image File Commands 72 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • url — The location URL or reserved ke yword of the file to be deleted.
Configur ation and Image File Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 73 Def ault Configuration If the unit number is unspecified, the de fault setting is the master unit number .
Configuratio n and Image File Commands 74 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays the contents of the running configuration file. sho w star tup-config The show startup-config Pri vileged EXEC mode command displays the co ntents of the startup configuration file.
Configur ation and Image File Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 75 Example The following example displa ys the contents of the ru nning configuration file. sho w backup-config The show backup-config Privileged EXEC mode command displays the contents of the backup confi guration file.
Configuratio n and Image File Commands 76 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays the conten ts of the backup configuration file.
Configur ation and Image File Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 77 Example The following example displays the active system image file th at is loaded by the device at startup.
Configuratio n and Image File Commands 78 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 79 7 Ethernet Configuration Commands interface ethernet The interface ethernet Global Configuration mode co mmand enters the interface configuration mode to configur e an Ethernet type interface.
Ethernet Configuration Comma nds 80 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax interface range ethernet { port-list | all } Pa r a m e t e r s • port-list — List of v a lid ports.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 81 Def ault Configuration The interface is enabled. Command Mode Interface Configuration (Eth ernet, port-channel ) mode User Guidelines There are no user guidelines for this command.
Ethernet Configuration Comma nds 82 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Interface Configuration (Eth ernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example adds a de scription to Et hernet port 5.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 83 User Guidelines The no speed command in a port-channel context retu rns each port in th e port-channel to its maximum capability .
Ethernet Configuration Comma nds 84 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example configures the duplex op eration of Ethernet port 1 to full duplex operation.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 85 Example The following example en ables auto-negotiation on Ethernet port 1. flo wcontr ol The flowcontrol Interface Configuration (Etherne t, port-channel) mode com m and configures flow control on a given interface.
Ethernet Configuration Comma nds 86 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide mdix The mdix Interface Configuration (Ethernet) m ode command enables cable crossover on a given interface. T o disable cable crossover , use the no form of this command.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 87 bac k-pressure The b ac k - p re ss u re Interface Configuration (E therne t, port-channel) mode command enables back pr essure on a g iven interface.
Ethernet Configuration Comma nds 88 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration Jumbo frames are disabled on the device. Command Mode Global Configuration User Guidelines This command is relevant to Giga d evices only .
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 89 User Guidelines There are no user guidelines for this command. Example In the following example, the coun ters for interface 1 are cleared.
Ethernet Configuration Comma nds 90 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w interfaces advertise The show interfaces advertise Privileged EXEC mode command displays auto- negotiation data.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 91 sho w interfaces configuration The show interfaces configuration Privileged EXEC mode command displays the configuration for all configured interfaces.
Ethernet Configuration Comma nds 92 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w interfaces status The show interfaces status Privileged EXEC mod e command displays the status of all configured interfaces.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 93 User Guidelines There are no user guidelines for this command. Example The following example disp lays the status of a ll configured interfaces.
Ethernet Configuration Comma nds 94 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Modes Privileged EXEC mode User Guidelines There are no user guidelines for this command.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 95 • port-channel-number — A valid port-channel num ber . Def ault Configuration This command has no default configuration. Command Modes Privileged EXEC mode User Guidelines There are no user guidelines for this command.
Ethernet Configuration Comma nds 96 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The following example displays counters fo r Ethernet port 1. The following table describes the fields shown i n the display . Console# show interfaces counters ethernet e xt.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 97 sho w por ts jumbo-frame The show ports jumbo-frame Privileged EXEC mode command displa ys the configuration of jumbo frames. Syntax show ports jumbo-frame Def ault Configuration This command has no default configuration.
Ethernet Configuration Comma nds 98 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide por t storm-contr ol include-m ulticast (GC) The port storm-control include-multicast Interface Configuration mode command enables counting multicast packets in the port storm-control br oadcast rate command.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 99 Pa r a m e t e r s • unknown-unicast — Specifies also countin g unknown unicast packets. Def ault Configuration Multicast packets are not counted.
Ethernet Configuration Comma nds 100 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines Use the port storm-control br oadcast rate Interface Configuration (Ethernet) mode command, to set the maximum allowable broadcast rate.
Ethernet Configurat ion Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 101 Example The following example configures a port storm-control b roadcast rate 4000 on port 2. sho w por ts storm-contr ol The show ports storm-control Privileged EXEC mode comman d displays the storm control configuration.
Ethernet Configuration Comma nds 102 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide 3 Disabled 3500 Broadcast 4 Disabled 3500 Broadcast 5 Disabled 3500 Broadcast 6 .
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 103 8 GVRP Commands gvrp enable (Global) GARP VLAN Registration Protocol (GVRP) is an industry-st a ndard protocol designed to propagate VLAN information from de vice to device.
GVRP Commands 104 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax gvrp enable no gvrp enable Def ault Configuration GVRP is disabled on all int e rfaces.
GVRP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 105 • timer_value — T imer values in milliseconds in multiples of 10.
GVRP Commands 106 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration Dynamic VLAN creation or modification is enabled. Command Mode Interface Configuration (Eth ernet, port-channel) mode User Guidelines This command forbids dy namic VLAN crea tion from the interface.
GVRP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 107 User Guidelines There are no user guidelines for this command. Example The following example forbid s dynamic registration of VLA Ns on Ethernet port 1.
GVRP Commands 108 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w gvrp configuration The show gvrp configuration Privieged EXEC mode command displays GV RP configuration information, in cluding timer values, whether GVRP and dynamic VLAN creation is enabled, and wh ich ports are ru nning GVRP .
GVRP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 109 sho w gvrp statistics The show gvrp statistics Privieged EXEC mode comman d displays GVRP statistics. Syntax show gvrp statistics [ ethernet interface | port-channel port-channel-number ] Pa r a m e t e r s • interface — A valid Ethernet port.
GVRP Commands 110 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w gvrp error -statistics The show gvrp error -statistics Privieged EXEC mode command displays GVRP error statistics.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 111 9 IGMP Snooping Commands ip igmp snooping (Global) The ip igmp snooping Global Configuratio n mode command enables Internet Group Management Protoco l (IGMP) snooping.
IGMP Snooping Command s 112 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax ip igmp snooping no ip igmp snooping Def ault Configuration IGMP snooping is disabled . Command Mode Interface Configuration (VLAN) mode User Guidelines IGMP snooping can only be enabled o n static VLANs.
IGMP Snooping Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 113 Command Mode Interface Configuration (VLAN) mode User Guidelines Multicast device ports can be co nfigured statically using the bridge multicast forward- all Interface Configuration (VLAN) mode co mmand.
IGMP Snooping Command s 114 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines The timeout should be at least greater than 2*query_interval+max_response_tim e of the IGMP router . Example The following example configures the host timeout to 300 seconds.
IGMP Snooping Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 115 Example The following example configures the mu lticast device timeout to 200 seconds. ip igmp snooping lea ve-time-out The ip igmp snooping leave-time-out Interface Configuration (VLAN) mode command configures the leave-time-out.
IGMP Snooping Command s 116 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example configures the host leave timeout to 6 0 seconds.
IGMP Snooping Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 117 sho w ip igmp snooping interface The show ip igmp snooping interface Privileged EXEC mode comma nd displays IGMP snooping configuration.
IGMP Snooping Command s 118 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays IGMP snooping information on VLAN 1000. sho w ip igmp snooping groups The show ip igmp snooping groups Privileged EXEC mode co mmand displays multicast groups learned b y IGMP snooping.
IGMP Snooping Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 119 Example The following example sh ows IGMP snooping informatio n on multicast groups. Console# show ip igmp snooping groups Vlan IP Address Querier Ports ---- ----------------- ------- ---------- 1 224-239.
IGMP Snooping Command s 120 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 121 10 IP Ad dress Commands ip address ip address ip-addr ess { mask | pr e fix-length } The ip address Interface Configuration (Eth ernet, VLAN, port-channel) mode command sets an IP address.
IP Address Comm ands 122 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example config ures VLAN 1 with IP add ress 131.
IP Address Comm ands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 123 If the device is configured to obtain its IP address from a DHCP server, it sends a DHCPDISCOVER message to provide information about itself to the DHCP server on the network.
IP Address Comm ands 124 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines This command is onl y oper ational in Switch mode.
IP Address Comm ands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 125 Example The following example the displays the configured IP interfaces and their types arp The arp Global Configuration mode command ad ds a permanent entr y in the Address Resolution Protocol (ARP) cache.
IP Address Comm ands 126 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Global Configuration mod e User Guidelines The software uses ARP cache entries to translat e 32-bit IP addresses into 48-bit hardware addresses.
IP Address Comm ands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 127 User Guidelines It is recommended not to set the timeout value to less than 3600. Example The following example conf igures the ARP timeout to 12000 seconds .
IP Address Comm ands 128 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax show arp Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
IP Address Comm ands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 129 Def ault Configuration IP Domain Naming System ( DNS)-based host name-to-address translation is enabled. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command.
IP Address Comm ands 130 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines There are no user guidelines for this command.
IP Address Comm ands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 131 ip host The ip host Global Configurat ion mode command define s static host name-to-ad dress mapping in the ho st cache. T o remove the name-to-address mapping, use the no form of this command.
IP Address Comm ands 132 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • name — Specifies the ho st entry to be removed. (Range: 1-158 characters) • * — Removes all entries. Def ault Configuration This command has no default configuration.
IP Address Comm ands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 133 Command Mode Privileged EXEC mode User Guidelines This command is only op erational in Switch mode. This command deletes the ho st name-to-address map ping temporarily until the ne xt renewal of the IP address.
IP Address Comm ands 134 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example disp lays host information. . Console# show hosts System name: Device Default domain is gm.com, s ales.gm.com, usa.
LA CP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 135 11 LA CP Commands lacp system-priority The lacp system-priority Global Co nfiguration mode command configures the system priority . T o return to the de fault configuration, use the no form of this command.
LACP Commands 136 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax lacp port-priority value no lacp port-priority Pa r a m e t e r s • value — Specifies port priority . (Range: 1-65535) Def ault Configuration The default port priority is 1.
LA CP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 137 • short — Specifies the short timeout value. Def ault Configuration The default port timeout value is long . Command Mode Interface Configuration (Ethernet) mode User Guidelines There are no user guidelines for this command.
LACP Commands 138 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example display LACP information for Et hernet port 1.
LA CP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 139 sho w lacp por t-channel The show lacp port-channel Privileged EXEC mode command d isplays LACP information for a port-channel.
LACP Commands 140 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax show lacp port-channel [ port_chann el_number ] Pa r a m e t e r s • port_channel_nu mber — V alid port-channel nu mber . Def ault Configuration This command has no default configuration.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 141 12 Line Commands Line The Line Global Configuration mode com m and identiofies a specific line for configuration, and begin s the process. Syntax Line {telnet | ssh} Pa r a m e t e r s • telnet — V irtual terminal fo r remote console access.
Line Commands 142 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax show line {telnet | ssh} Pa r a m e t e r s • telnet — V irtual terminal fo r remote console access. • ssh — V irtual terminal for secured remote console access.
Line Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 143.
Line Commands 144 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Management A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 145 13 Mana g ement A CL Commands management access-list The management access-lis t Global Configuration mode comm and configures a management access list and enters the Mana gement Acc ess-list Configuration command mode.
Management A C L Commands 146 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example creates a manageme nt access list called mlist, configures management Eth ernet interfaces 1 and 9 an d makes the new access list the active list.
Management A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 147 permit (Management) The permit Management Access-List Configuration mode co mmand defines a permit rule.
Management A C L Commands 148 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide deny (Management) The deny Management Access-List Config uration mode command de fines a deny rule.
Management A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 149 management access-class The management access-clas s Global Configuration mo de command restricts management connections by de fining the active management access list.
Management A C L Commands 150 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide show management access-list The show management acces s-list Privileged EXEC mode command displays management access-lists.
Management A CL Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 151 show management access-class The show management access-class Privileged EXEC mode command displays the active management access list. Synt ax show management access-class Default Configur ation This command has no default configuration.
Management A C L Commands 152 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
PHY Diagnostics Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 153 14 PHY Diagnostics Commands test copper -por t tdr The test copper - port tdr Privileged.
PHY Diagnostics Commands 154 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w copper-ports tdr The show copper -ports tdr User EXEC mode command disp la ys information on the last T ime Domain Reflectometry (TDR) test performed on copper ports.
PHY Diagnostics Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 155 sho w copper-ports cable-length The show copper -ports cable-length User EXEC mode command displays the estimated copper cable length attached to a port.
PHY Diagnostics Commands 156 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
P or t Channel Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 157 15 P or t Channel Commands interface por t-channel The interface port-channel Global Configuration mode command enters the interface configuration mode to configure a specific port-cha nnel.
P or t Channel Commands 158 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide interface range por t-channel The interface range port-channel Global Configuration mode co mmand enters the interface configuration mode to configure multiple port-channels.
P or t Channel Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 159 Syntax channel-group p o rt-channel-number mode { on | auto } no channel-group Pa r a m e t e r s • port-channel_number — Specifies the number of th e valid port-channel for the current port to join.
P or t Channel Commands 160 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • port-channel-numb er — V alid port-cha nnel number . Def ault Configuration This command has no default configuration.
P or t Monitor Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 161 16 P or t Monitor Commands por t monitor The port monitor Interface Configuration mode comm and starts a port monitoring session. T o stop a port monitoring session, use the no form of this command.
P or t Monitor Commands 162 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The following restrictions apply to po rts configured to be source ports: The port cannot be already con f igured as a destination port. Example The following example copies traffic on port 8 (source port) to port 1 (destination port).
P or t Monitor Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 163 sho w por ts monitor The show ports monitor User EXEC mode command displays the port monitoring status. Syntax show ports monitor Def ault Configuration This command has no default configuration.
P or t Monitor Commands 164 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 165 17 QoS Commands qos The qos Global Configuration mode command en ables quality of serv ice (QoS) on the device. T o disable QoS on the device, use the no form of this command.
QoS Commands 166 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w qos The show qos User EXEC mode command displays the quality of service (QoS) mode for the device. Syntax show qos Def ault Configuration This command has no default configuration.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 167 Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are n o user guidelines. Example The following example displays the parameters of the aggregate policer called ‘policer1’.
QoS Commands 168 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration There is no default config uration for this command. Command Mode Privileged EXEC mode User Guidelines If no keyword is specified , port QoS mode (for example.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 169 sho w qos map The show qos map User EXEC m ode command displays all QoS maps. Syntax show qos map [ dscp-queue ] Pa r a m e t e r s • dscp-queue — Indicates the DSCP to queue map.
QoS Commands 170 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays th e DSCP port-queue map .
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 171 • match-any — Checks that the packet matches on e or more classification criteria in the class map match stat ement. Def ault Configuration By default, the match-all parameter is selected.
QoS Commands 172 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • class-map-name — Specifies the name of the class map to be displayed. Def ault Configuration This command has no default configuration.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 173 Command Mode Class-map Configuration mode. User Guidelines There are no user guidelines for this command.
QoS Commands 174 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines Before configuring policies for classes whose match criteria are defined in a class map, use the policy-map Global Configuration m ode comma nd to specify the name of the policy map to be created or modified.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 175 Command Mode Policy-map Configuration mode User Guidelines Before modifying a policy for an existing.
QoS Commands 176 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode User EXEC mode User Guidelines There are no user guidel ines f or this command.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 177 User Guidelines Action serviced to a class, so that if an IP packet arrives, the qu eue is assigned per DSCP . If a non-IP p acket arrives, the queue is assigned per CoS (VP T).
QoS Commands 178 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Policy maps that contain set or trust Policy-map Cla ss Configuration commands or that have ACL classifications cannot be attach ed to an egress interface by using the se rvice- policy (Ethernet, Port-channel) Interfa ce Configuration mode command.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 179 Command Mode Policy-map Class Configuration mode User Guidelines Policing uses a token bucket algorithm. CIR re presents the speed with which the token is removed from th e bucket.
QoS Commands 180 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines Only one policy m ap per interface per direction is supported. Example The following example attaches a policy ma p called policy1 to the input interface.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 181 User Guidelines Policers that contain set or trust Policy-map Class Configura tion commands or that have ACL classifications cannot be att ached to an output interface.
QoS Commands 182 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines There are no user guidelines. Example The following example displays the parameters of the aggr egate policer called policer1.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 183 User Guidelines An aggregate policer can be applied to mul tiple classes in the same policy map; An aggregate policer cannot be applied across multiple policy ma ps or interfaces.
QoS Commands 184 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Cos4 is mapped to queue 5. Cos5 is mapped to queue 6.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 185 Def ault Configuration The default WRR weight ratio is one-eighth of the sum of all queue weights (each weight is set to 6).
QoS Commands 186 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no priority-queue out num-of-queues Pa r a m e t e r s • number -of-queues — Specifies the number of expedite queues. Exped ite queues have higher indexes.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 187 • excess-burst — Specifies the exces s burst si ze (CBS) in bytes.(Range: 4096- 16769020) • queue-id — Specifies the queue number to whic h the shaper is assigned.
QoS Commands 188 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • buffers – Displays the buffer setting for the interface’ s queues.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 189 qos wrr -queue threshold The wrr -queue threshold Global Conf iguration mode command assigns queue thresholds globally . T o return to the default configuration, use the no form of this command.
QoS Commands 190 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide qos wrr -queue threshold tengigabitethernet queue-id thr eshold-per centage0 thr eshold- per centage.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 191 Syntax qos map policed-dscp dscp-list to dscp-mark -down no qos map policed-dscp Pa r a m e t e r s • dscp- list — Specifies up to 8 DSCP va lues separated by a spa ce.
QoS Commands 192 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • dscp-list — S peci fies up to 8 DSCP values separated by a space. (Range: 0 - 63) • queue-id — S pecifies the queue numbe r to which the DSCP values are mapped.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 193 Def ault Configuration CoS is the default trust mode. Command Mode Global Configuration mode User Guidelines Packets entering a quality of service (QoS) do main are classified at the edge of the QoS domain.
QoS Commands 194 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Interface Configuration (Eth ernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example configures Ethern et port 15 to the default trust state.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 195 Example The following example conf igures port 15 default CoS value to 3. qos dscp-m utation The qos dscp-mutation Global Configu ration mode command applies the DSCP Mutation map to a system DSCP trusted port.
QoS Commands 196 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example applies the DSCP Mu tation map to system DSCP trusted ports. qos map dscp-m utation The qos map dscp-mutation Global Configuration m ode command modifies the DSCP to DSCP mutation map.
QoS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 197.
QoS Commands 198 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 199 18 RMON Commands sho w rmon statistics The show rmon statistics Privileged EXEC mode command displays RMON Ethernet statistics.
RMON Commands 200 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The following table describes the sign ificant fields show n in the display .
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 201 rmon collection history The rmon collection history Interface Configuration (Eth ernet, port-channel ) mode command en ables a Remote Monitoring (RMON) MIB history statistics group on an interface.
RMON Commands 202 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines Cannot be configured for a rang e of interfaces (Range context).
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 203 The following example displays all RMON history group statistics.
RMON Commands 204 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays RMON Et hernet history statistics for index 1.
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 205 The following table describes signif icant fields show n in the example: Console# show rmon history.
RMON Commands 206 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide rmon alarm The rmon alarm Global Configuration mode command configures alarm conditions.
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 207 • type — Specifies the method used for samplin g the selected variable and calculating the value to be compared against the thresholds. Possible values are absolute and delta .
RMON Commands 208 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w rmon alarm-table The show rmon alarm-table Privileged EXEC mode command displays the alarms table. Syntax show rmon alarm-table Def ault Configuration This command has no default configuration.
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 209 sho w rmon alarm The show rmon alarm Privileged EXEC mo de command d isplays a larm configuration . Syntax show rmon alarm number Pa r a m e t e r s • number — Specifies the alarm index.
RMON Commands 210 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The following table describes the sign ificant fields shown in the display: rmon e vent The rmon event Global Configuratio n mode comman d configures an event.
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 211 • community text — If the specified notification t ype is trap , an SNMP trap is sent to the SNMP community specif ied by this oc tet string. (Range: 0-127 characters) • description text — Specifies a comment describing this event.
RMON Commands 212 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines There are no user guidelines for this command.
RMON Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 213 Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
RMON Commands 214 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide rmon tabl e-size The rmon table-size Global Con figuration mode command co nfigures the maximum size of RMON tables. T o return to the default configuration, use the no form of this command.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 215 19 RADIUS Commands radius-server host The radius-server host Global Configuration mode command specifies a RADIUS server host. T o delete the specified RADIUS host, use the no form of this command.
RADIUS Commands 216 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The port number for authentic ation requests is 1812. The usage type is all . Command Mode Global Configuration mod e User Guidelines T o specify multiple hosts, multiple radius-server host commands can be used.
RADIUS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 217 Def ault Configuration The key-string is an empty string. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command.
RADIUS Commands 218 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines There are no user guidelines for this command. Example The following example configures the numb er of times the software searches all RADIUS server hosts to 5 times.
RADIUS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 219 Example The following example configures the source IP address used for communication with all RADIUS servers to 10.
RADIUS Commands 220 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide radius-server deadtime The radius-server deadtime Global Configuration mode command improves RADIUS response time when servers are unavaila ble. The command is used to cause the unavailable servers to be skip ped.
RADIUS Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 221 Syntax show radius-servers Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
RADIUS Commands 222 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 223 20 W eb Ser ver Commands ip http server The ip http server Global Configuration mode co mm and enables configuring the device from a browser .
W eb Ser ver Commands 224 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no ip http port Pa r a m e t e r s • port-number — Port number for use by the HTTP server . (Range: 0-65535) Def ault Configuration The default port number is 80.
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 225 Def ault Configuration The default timout is 10 minutes. Command Mode Global Configuration mode User Guidelines This command also configures the exec-timeout for HTTPS in case the the HTTPS timeout was not set.
W eb Ser ver Commands 226 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide ip https por t The ip https port Global Configuration m ode command specifies the TCP port u sed by the server to configure the device through the W eb browser .
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 227 no ip https exec-timout Pa r a m e t e r s • minutes — Specifies the numbe r of minutes to wait. • seconds — Specifies the number of seconds to wait.
W eb Ser ver Commands 228 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • country — Specifies the country name. (Range: 2-2) • days — Specifies number of days cer tification is valid. (Range: 30-3650) Def ault Configuration The Certificate and SSL ’ s RSA key pairs do not exist.
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 229 Pa r a m e t e r s • number — Specifies the c ertificate number . (Range: 1-2) • common- name — Specifies the fully qualified UR L or IP address of the de vice.
W eb Ser ver Commands 230 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example generates and disp lays a certificate request for HTTPS.
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 231 The imported certificate must be based on a ce rtificate request created by the crypto certificate request Privi leged EXEC mode comm and.
W eb Ser ver Commands 232 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration Certificate number 1. Command Mode Global Configuration mod e User Guidelines The crypto certificate generate command should be used to generate HTTPS certificates.
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 233 Example The following example di splays the certificate. sho w ip http The show ip http Privileged EXEC mode com mand displays the HTTP server configuration.
W eb Ser ver Commands 234 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays the HTTP server configuration. sho w ip https The show ip https Privileged EXEC mod e comman d displays the HTTPS server configuration.
W eb Ser ver Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 235 Certificate 2 is inactive Issued by: self-signed Valid from: 8/9/2004 to 8/9/2005 Subject: CN= router.
W eb Ser ver Commands 236 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 237 21 SNMP Commands snmp-server community The snmp-server community Global Configura tion mode command config ures the community access string to permit access to the SNMP protocol.
SNMP Commands 238 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines The view-na m e parameter cannot be specified for su , which has access to the whole MIB. The view-name parameter can be used to restrict th e access rights of a community string.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 239 • oid-tr ee — Specifies the object identifier of the ASN.1 subtree to be included or excluded from the view . T o iden tify the subtree, specify a text string consisting of numbers, such as 1.
SNMP Commands 240 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no snmp-server gr oup gr oupname { v1 | v2 | v3 [ noauth | auth | priv ]} Pa r a m e t e r s • gr oupname —Specifies the name o f the group (Range: 1-30 characters).
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 241 Example The following example attaches a group called user-group to SNMPv3 and assigns to the group the privacy security level and read access rights to a view called user-view .
SNMP Commands 242 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide if authentication and privacy ar e required, 36 bytes should be entered. Each byte in the hexadecimal character string is two hexadeci mal digits. Each byte can be separated by a period or colon.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 243 Pa r a m e t e r s • engineid-string —Specifies a character string that identifies the engine ID. (Range: 5- 32 characters) • default —The engine ID is created automati cally based on the device MAC address.
SNMP Commands 244 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The show running-config Privileged EXEC mode comman d does not display the SNMP engine ID configuration. T o see the SN MP engine ID configuration, en ter the snmp- server engineID local Global Configuration mode command .
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 245 snmp-server filter The snmp-se rver filter Global Co nfiguration mode comm and create s or updates a Simple Network Management Protocol (SNMP) server filter entry .
SNMP Commands 246 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide snmp-server host The snmp-server host Global Configuration mode comm and specifies the recipient of Simple Network Management Prot ocol V ersio n 1 or V ersion 2 notificatio ns.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 247 Command Mode Global Configuration mode User Guidelines When configuring an SNMPv1 or SNMPv2 notif ication recipient, a notificat ion view for that recipient is automatica lly generated for all the MIB.
SNMP Commands 248 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide • auth — Indicates authentication of a packet without encrypting it. • priv — Indicates authentication of a packet with encryption. • port — Specifies the UDP port of the host to use.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 249 no snmp-server tr ap authentication Def ault Configuration SNMP failed authentica tion traps are enabled. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command.
SNMP Commands 250 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines Do not include spaces in the text string or pl ace text that includes spaces inside qu otation marks. Example The following example configures the system contact point called Intel_T echnical_Support .
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 251 Example The following example defi nes the device location as New_Y o rk . snmp-server set The snmp-server set G lobal Configuration mo de command defines th e SNMP MIB value.
SNMP Commands 252 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w snmp The show snmp Privilege d EXEC mode command display s the SNMP status. Syntax show snmp Def ault Configuration This command has no default configuration.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 253 The following table describes the significant fields shown in the display . sho w snmp engineid The show snmp engineID Privileged EXEC mode command di splays the ID of the local Simple Network Managemen t Protocol (SNMP) engine.
SNMP Commands 254 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays the SNMP engine ID.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 255 Example The following example displays the configuration of views. sho w snmp groups The show snmp groups Privileged EXEC mode co mmand displays the configuration of groups.
SNMP Commands 256 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays the config uration of views. The following table describes si gnificant fields shown above. sho w snmp filters The show snmp filters Privileged EXEC mode command di splays the configuration of filters.
SNMP Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 257 Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays the configuration of filters.
SNMP Commands 258 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines There are no user guidelines for this command.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 259 22 Spanning-T ree Commands spanning-tree The spanning-tree Global Con figuration mode co mmand enables spanning-tree functionality . T o disable the span ning-tree functionality , use the no form of this command.
Spanning-T ree Commands 260 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no spanning-tr ee mode Pa r a m e t e r s • stp — Indicates that the Spanning T ree Protocol (STP) is enabled. • rstp — Indicates that the Rapid Sp anning T re e Protocol (RSTP) is enabled.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 261 Pa r a m e t e r s seconds — T ime in seconds. (Range: 4-30) Def ault Configuration The default forwarding time for the IEEE Sp an ning Tree P rotocol (STP) is 15 seconds.
Spanning-T ree Commands 262 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Modes Global Configuration mod e User Guidelines When configuring the hello time,.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 263 2*(Forward-T ime - 1) >= Max-Age Max-Age >= 2*(Hello-T ime + 1) Example The following example conf igures the spanning tree bridge maximum-age to 10 seconds.
Spanning-T ree Commands 264 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide spanning-tree disable The spanning-tree disable Interface Configuration mode command disables spanning tree on a specific port. T o enable spanning tree on a port, use the no form of this command.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 265 Pa r a m e t e r s • cost — Path cost of the port (Range: 1-20 0,000,000) Def ault Co.
Spanning-T ree Commands 266 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • priority — The priority of the port. (Range: 0-240 in multiples of 16) Def ault Configuration The default port priority for IEEE Spanning T reeProtocol (STP) is 128.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 267 Command Modes Interface Configuration (Eth ernet, port-channel ) mode User Guidelines This feature should be used on ly with interfaces conn ected to end sta tions.
Spanning-T ree Commands 268 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines There are no user guidelines for this command. Example The following example enables shared spanning-tre e on Ethernet port 15 .
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 269 Example The following example sets the default path cost method to long .
Spanning-T ree Commands 270 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide c lear spanning-tree detected-pr otocols The clear spanning-tree detected-pr otocols Priv.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 271 no spanning-tree mst instance-id priority Pa r a m e t e r s • instance -id— ID of the spanning -tree instance (Range: 1-15).
Spanning-T ree Commands 272 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration The default number of hop s is 20. Command Mode Global Configuration mod e User Guidelines There are no user guidelines for this command.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 273 User Guidelines There are no user guidelines for this command. Example The following example conf igures the port priority of port g1 to 144.
Spanning-T ree Commands 274 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines There are no user guidelines for this command. Example The following example conf igures the MSTP instance 1 path cost for Ethernet port 9 to 4.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 275 instance (mst) The instance MST Configuration mode comm and maps VLANS to an MST instance. Syntax instance instance-id {add | remove} vlan vlan-range Pa r a m e t e r s • instance-ID— ID of the MST instance (Range : 1-15).
Spanning-T ree Commands 276 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide name (mst) The name MST Configuration mode command defines the configuration name. T o restore the default setting, use the no form of this command.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 277 Pa r a m e t e r s • value — Configuration revisio n number (Range: 0-65535). Def ault Configuration The default configuratio n revision number is 0.
Spanning-T ree Commands 278 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode MST Configuration mode User Guidelines The pending MST region configuration take s effect only after exiting the MST Configuration mode.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 279 Example The following example exits the MST Co nfiguration mode an d saves changes. abor t (mst) The abort MST Configuration mode command ex its the MST Configuration mode without applying t h e configuration ch anges.
Spanning-T ree Commands 280 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax spanning-tr ee guard root no spanning-tr ee guard root Def ault Configuration Root guard is disabled.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 281 • port-channel-number — A valid po rt channel number . • detail — Indicates detailed information. • active — Indicates active ports only .
Spanning-T ree Commands 282 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Interfaces Name State Prio.Nbr Cost Sts Role PortFast Type ---- ------- -------- ----- --- ---- -------- ---------- 1 Enabled 128.1 20000 F WD Roo t No P2p bound(RSTP) 2 Enabled 128.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 283 Console# show spanning-tree Spanning tree disabled (BPDU f iltering) mode RSTP Default po.
Spanning-T ree Commands 284 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Address 00:02:4b:29:7a:00 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interfaces Name State Prio.Nbr Cost Sts Role PortFast Type ---- ------- -------- ----- --- ---- -------- ---------- 1 Enabled 128.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 285 Console# show spanning-tree detail Spanning tree enabled mode RSTP Default port cost meth.
Spanning-T ree Commands 286 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Port 3 disabled State: N/A Role: N/A Port id: 128.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 287 Console# show spanning-tree ethernet ext.
Spanning-T ree Commands 288 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Max hops 20 Interfaces Name State Prio.Nbr Cost Sts Role PortFast Type ---- ------- -------- ----- --- ---- -------- ---------- 1 Enabled 128.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 289 Console# show spanning-tree detail Spanning tree enabled mode MSTP Default port cost meth.
Spanning-T ree Commands 290 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Designated port id: 128.2 Designated path cost: 20000 Number of transitions to fo rwarding state: 1 BPDU: sent 2, received 1706 38 Port 3 enabled State: Forwarding Role: Designated Port id: 128.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 291 Port 1 (1/1) enabled State: Forwarding Role: Boundary Port id: 128.
Spanning-T ree Commands 292 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Console# show spanning-tree Spanning tree enabled mode MSTP Default port cost method: l o.
Spanning-T ree Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 293 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Max hops 20.
Spanning-T ree Commands 294 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 295 23 SSH Commands ip ssh por t The ip ssh port Global Configu ration mode command specifies the port to be used by the SSH server . T o restore the default configuratio n, use the no form of this command.
SSH Commands 296 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax ip ssh server no ip ssh server Def ault Configuration Device configuration from a SSH server is disabled.
SSH Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 297 User Guidelines DSA keys are generated in pairs: o n e public DSA key and o n e private DSA key . If the device already has DSA keys, a warning and prompt to replace the existing keys with new keys are displa yed.
SSH Commands 298 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide RSA keys are saved to the backup m a ster . This command may tak e a consider able period of time to execute. Example The following example ge nerates RSA key pairs.
SSH Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 299 crypto key pubke y-chain ssh The crypto key pubkey-chain ssh Global Conf iguration mode command enters the SSH Public Key-chain Co nfiguration mode. The mode is used to manually specify other device public keys such as SSH client public keys.
SSH Commands 300 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide user -key The user -key SSH Public Key-string Configuratio n mode command specifies which SSH public key is manually configured . T o remove an SSH public key , use the no form of this command.
SSH Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 301 ke y-string The key-string SSH Public Key-stri ng Configuration m ode command manually specifies an SSH public key . Syntax key-string key-string row key-string Pa r a m e t e r s • row — Indicates the SSH publi c key row by row .
SSH Commands 302 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example enters pu blic key strings for SSH public key clie nt bob . sho w ip ssh The show ip ssh Privileg ed EXEC mode command displa ys the SSH server configuratio n.
SSH Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 303 User Guidelines There are no user guidelines for this command. Example The following example displays the SSH server configuration. The following table describes the significant fields shown in the display .
SSH Commands 304 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
SSH Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 305 Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example display s SSH public keys stored on the device.
SSH Commands 306 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 307 24 Syslog Commands logging on The logging on Global Configuration mode comman d controls error message logging .
Syslog Commands 308 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide logging The logging Global Configuration m ode command logs messages to a syslog server . T o delete the syslog server with the specified address from the list of syslogs, use the no form of this command.
Syslog Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 309 Example The following example limits logg ed messages sent to the sysl og server with IP address 10.
Syslog Commands 310 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide logging b uffered size The logging buffered size Global Configuration mode co mmand changes the number of syslog messages stored in the internal buf fer .
Syslog Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 311 Syntax clear logging Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
Syslog Commands 312 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Global Configuration mod e User Guidelines There are no user guidelines for this command. Example The following example limits syslog messages se nt to the logging file based on severity level alerts .
Syslog Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 313 aaa logg ing The aaa logging Global Configuration m ode command enables loggin g AAA login events. T o disable logging AAA login events, use the no form of this command.
Syslog Commands 314 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no file-system logging copy file-system logging delete-r ename no file-system logging delete-r ename Pa r a m e t e r s • copy — Indicates logging messages rela ted to file copy operations.
Syslog Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 315 Pa r a m e t e r s • deny — Indicates logging messages related to deny actions of man a gement ACLs. Def ault Configuration Logging management ACL events is enabled.
Syslog Commands 316 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays the state of lo gging and the syslog messages s tored in the internal buffer . Console# show logging Logging is enabled.
Syslog Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 317 sho w logging file The show logging file Privileged EXEC m ode command displays the state of l ogging and the syslog messages stored in the logging file.
Syslog Commands 318 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w syslog-ser vers The show syslog-servers Privileged EXEC mode comma nd displays the settings of the syslog servers. Syntax show syslog-servers Def ault Configuration This command has no default configuration.
Syslog Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 319 Example The following example displays th e settings of the syslog servers. Console# show syslog-servers Device Configuration IP address Port Severity Facility Description ------------ ---- ------------- -------- ----------- 192.
Syslog Commands 320 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 321 25 System Management Commands ping The ping User EXEC mode command sends ICMP echo request packets to another node on the network.
System Management Command s 322 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Destination does n o t respond. If the host does n ot respond, a “no answer from host” appears in ten seconds. Destination unreachable.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 323 Syntax traceroute { ip-address | hostname }[ size packet_size ] [ ttl max-ttl ] [ count packet_count ] [ timeout time_out ] [ sour ce ip-address ] [ tos tos ] Pa r a m e t e r s • ip-address — IP address of the destination host.
System Management Command s 324 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The tracer oute command sends ou t one probe at a time. Each outgoing packet may result in one or two error m essages. A "time ex ceeded" error message indicates that an intermediate device has seen and discard ed th e probe.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 325 telnet The telnet User EXEC mode command enables logging on to a host that supports T elnet. Syntax telnet { ip-address | hostna me } [ port ] [ keyword1.
System Management Command s 326 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Special T elnet Sequences At any time during an active T e lnet session, T elne t commands can be listed by pres sing the Ctrl-shift-6-? keys at the system prompt.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 327 Ports T able This command lists concurrent te lnet connections to remote ho sts that were opened by the current telnet session to the lo cal device.
System Management Command s 328 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example display s connecting to 176.213.10.50 v ia T elnet. resume The resume User EXEC mode command enables switching to another open T elnet session.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 329 Syntax rel o a d Def ault Configuration This command has no default configuration.
System Management Command s 330 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Global Configuration mod e User Guidelines There are no user guidelines for this command. Example The following example specifies the device host name.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 331 sho w sessions The show sessions User EXEC mode command lists open T elnet sessions. Syntax show sessions Def ault Configuration There is no default co nfiguration for this command.
System Management Command s 332 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide sho w system The show system User EXEC mode command displays system information. Syntax show system Def ault Configuration This command has no default configuration.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 333 sho w system id The show system id Privilaged EXEC mode command displays the sy stem identity information. Syntax show system id [ unit unit ] Pa r a m e t e r s • unit unit — Unit number .
System Management Command s 334 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example sho w system flowcontr ol The show system flowcontrol Interface Configuration mode command displays the flow control state on cascade ports.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 335 Example sho w system mode The show system mode Priviledged EXEC mode comm and displays informat ion on features control. Syntax show system mode Def ault Configuration This command has no default configuration.
System Management Command s 336 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax show version Def ault Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines There are no user guidelines for this command.
System Management Command s Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 337 Def ault Configuration Disabled. Command Mode Global Configuration mode User Guidelines Use the show cpu utilization Privileged EXEC command to view information on CPU utilization.
System Management Command s 338 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example conf igures the CPU utilizatio n information display. Console# show cpu utilization CPU utilization service is on.
T ACA CS+ Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 339 26 T A CA CS+ Commands tacacs-server host The tacacs-serve r host Global Configuration mode command specifies a T ACACS+ host. T o delete the specifie d name or address, use the no form of this command.
T ACA CS+ Commands 340 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide If no T ACACS+ server priority is sp ecified, default priority 0 is used. Command Mode Global Configuration mod e User Guidelines Multiple tacacs-server host commands can be used to specify multiple hosts.
T ACA CS+ Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 341 User Guidelines There are no user guidelines for this command.
T ACA CS+ Commands 342 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide tacacs-server source-ip The tacacs-server sour ce-ip Global Configuration mode command configures the source IP address to be used for co mmunication with T ACACS+ server s.
T ACA CS+ Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 343 Pa r a m e t e r s • ip-address — Name or IP address of the T ACACS+ server . Def ault Configuration This command has no default configuration.
T ACA CS+ Commands 344 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
User Interf ace Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 345 27 User Interface Commands enable The enable User EXEC mode command ente rs the Privileged EXEC mode. Syntax enable [ privilege-level ] Pa r a m e t e r s • privilege-level — Privilege level to ente r the system.
User Interf ace Commands 346 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Syntax disable [ privilege-level ] Pa r a m e t e r s • privilege-level — Privilege level to ente r the system. (Range: 1-15) Def ault Configuration The default privilege level is 1.
User Interf ace Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 347 User Guidelines There are no user guidelines for this command. Example The following example enters Privileged EX EC mode and logs in with username admin .
User Interf ace Commands 348 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide e xit (Configuration) The exit command exits any configuration mode to the next highest mode in the CLI mode hierarchy . Syntax exit Def ault Configuration This command has no default configuration.
User Interf ace Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 349 Command Mode Privileged and User EXEC mode s User Guidelines There are no user guidelines for this command. Example The following exampl e closes an active terminal session.
User Interf ace Commands 350 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide help The help command displays a brief description of the help system. Syntax help Def ault Configuration This command has no default configuration.
User Interf ace Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 351 Syntax terminal datadump no terminal data dump Def ault Configuration Dumping is disabled.
User Interf ace Commands 352 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode User EXEC mode User Guidelin es The buffer includes executed and unexecuted commands. Commands are listed from the firs t to the most rec ent command.
User Interf ace Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 353 Command Mode Privileged and User EXEC mode s User Guidelines There are no user guidelines for this command. Example The following example displays the current pr ivilege level for the Privileged EXEC mode.
User Interf ace Commands 354 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example displays the current pr ivilege level for the Privileged EXEC mode.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 355 28 VLAN Commands vlan database The vlan database Global Configuration mode command enters the VLAN Configuration mode. Syntax vlan database Def ault Configuration This command has no default configuration.
VLAN Commands 356 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • vlan-range — Specifies a lis t of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma an d no spaces; a hyphen des ignates a range of IDs .
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 357 User Guidelines There are no user guidelines for this command. Example The following example conf igures VLAN 1 with IP address 131.108.1.27 an d subnet mask 255.
VLAN Commands 358 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example grou ps VLANs 221, 228 and 889 to receive the sam e command. name The name Interface Configuration mode command ad ds a name to a VLAN.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 359 s w itchpor t pr otected The switchport protected Interface Configuration mode command overrides the FDB decision, and sends all Unicas t, Multicast and Broadcast traf fic to an uplink port.
VLAN Commands 360 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide s witchpor t mode The switchport mode Interface Configuration mode co mmand configures the VLAN membership mode of a port. T o return to the default configuration, use the no form of this command.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 361 Syntax switchport access vlan { vlan-id | dynamic } no switchport access vlan Pa r a m e t e r s • vlan-id — Specifies the ID of the VLAN to which the port is configured.
VLAN Commands 362 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Pa r a m e t e r s • add vlan-list — List of VLAN IDs to b e added. Separate nonconsecutiv e VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 363 Def ault Configuration VID=1. Command Mode Interface Configuration (Eth ernet, port-channel ) mode User Guidelines The command adds the port as a member in th e VLAN.
VLAN Commands 364 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration If the port is added to a VLAN without specifying tagged or untagg ed, the default setting is tagged.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 365 User Guidelines There are no user guidelines for this command. Example The following example configures the PVID for Ethernet port 1, when the interface is in general mode.
VLAN Commands 366 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide s witchpor t g eneral acceptable-frame-type tag g ed-onl y The switchport general acceptab le-frame-type tagged-only Interface Configuration mode command discards untagged fram e s at ingress.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 367 Pa r a m e t e r s • add vlan-list — Specifies the list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma a nd no spaces. A hyphen designates a range of IDs.
VLAN Commands 368 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration The software reserves a VLAN as the internal usage VLAN of an interface.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 369 • vlan-name — Specifies a VLAN name string. (Range: 1-32 characters) Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
VLAN Commands 370 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 371 Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example display s the switchport configuration for Ethernet port 1.
VLAN Commands 372 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide ---- ------- ----------- 1 default untagged 11 VLAN011 tagged 19 IPv6 VLAN untagged 72 VLAN0072 untagged Forbidden VLANS: VLAN Name ---- ---- 73 out Console # show interface switchport e thernet ext.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 373 map pr otocol pr otocols-group The map pro tocol protocols-gr oup VLAN database command adds a special protocol to a named group of protocols, which may be used for protocol-based VLAN assignment.
VLAN Commands 374 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode VLAN Database mode User Guidelines The following protocol na mes are reserved: • ip-arp • ipx Example The following example maps protocol ip-arp to the group named "213".
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 375 User Guidelines There are no user guidelines for this command. Example The following example sets a proto col-based classification rule of protocol group 1 to VLAN 8.
VLAN Commands 376 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example maps the MAC address 00:13:20:95:2 1:AA to macs group 4.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 377 map subnet subnets-gr oup Use the map subnet subn ets-group VLAN configuration command to map IP subnet to a group of IP subnets. Use the no form of this command to delete the map.
VLAN Commands 378 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide no switchpo rt general map subnets-group group Pa r a m e t e r s • group - Group number . Ran ge: 1 - 2147483647 • vlan-id - Defin e the VLAN ID that is associated with the rule.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 379 Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays protocols-groups informa tion.
VLAN Commands 380 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example disp lays protocols-groups information. sho w vlan subnets-groups Use the show vlan subnets-gr o ups EXEC command to show subnets-groups information.
VLAN Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 381 Example The following exam ple shows subnets-groups information. onsole> show vlan subnets-grou ps MAC Prefix Group ------------------------------ ------- 172.
VLAN Commands 382 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 383 29 802.1x Commands aaa authentication dot1x The aaa authentication dot1x Global Configuration mode command specifies one or more authentication, authorization, and acc ounting (AAA) methods for use on interfaces running IEEE 802.
802.1x Commands 384 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example uses the aaa authentication dot1x default command with no authentication. dot1x system-auth-contr ol The dot1x system-auth-control Global Configuration mode command enab les 802.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 385 Syntax dot1x port-control { auto | force-authorized | force-unauthorized } no dot1x port-control Pa r a m e t e r s • auto — Enables 802.
802.1x Commands 386 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide dot1x re-authentication The dot1x re-authentication Interface Configuration mode command enab les periodic re-authentication of the client. T o return to the default configuration, use the no form of this command.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 387 Pa r a m e t e r s • seconds — Number of seconds between re-authentication attempts. (Range: 300-4294967295) Def ault Configuration Re-authentication period is 3600 seconds.
802.1x Commands 388 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following command manually initiates a re-a uthentication of 802.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 389 The default value of this command should only be changed to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers.
802.1x Commands 390 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 391 User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients.
802.1x Commands 392 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Example The following example sets the timeout period before retransm itting an EAP-request frame to the client to 3600 seconds.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 393 sho w dot1x The show dot1x Privileged EXEC mode command d isplays the 802.1x status of the device or specified interface. Syntax show dot1x [ ethernet interface ] Pa r a m e t e r s • interface — V alid Ethernet port.
802.1x Commands 394 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The following table describes si gnificant fields shown above: * Port is down or not present.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 395 sho w dot1x users The show dot1x users Privileged EXEC mode comm and displays active 802.
802.1x Commands 396 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Def ault Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 397 sho w dot1x statistics The show dot1x statistics Privileged EXEC mo de command di splays 802.1x statistics for the specified interface. Syntax show dot1x statistics ethe rnet interface Pa r a m e t e r s • interface — V alid Ethernet port.
802.1x Commands 398 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide The following table describes the sign ificant fields shown in the display: AD V ANCED FEA TURES dot1x auth-not-req The dot1x auth-not-req Interface Co nfiguration mode command enables unautho rized devices access to the VLAN.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 399 Def ault Configuration Access is enabled. Command Mode Interface Configuration (VLAN) mode User Guidelines An access port cannot be a memb er in an unauthenticated VLAN.
802.1x Commands 400 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide User Guidelines This command enable s the attachment of multiple client s to a sing le 802.1x-enabled port. In this mode, only one of the attached hosts must be successf ully authorized for all hosts to be granted network access.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 401 No traps are sent. Command Mode Interface Configuration (Ethernet) mode User Guidelines The command is relevant when multiple ho sts is disabled and the user has been successfully authenticated.
802.1x Commands 402 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide If the guest VLAN is defined and enabled, the port automatically joins the guest VLAN when the port is unauthorized and leaves it wh en the port becomes authorized.
802.1x Commands Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 403 Example The following example enables unauthorized users on Ethernet port 1 to access the guest VLAN. sho w dot1x adv anced The show dot1x adv anced Privileged EXEC mode command display s 802.
802.1x Commands 404 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide Interface Multiple Hosts Guest VLAN --------- -------------- ---------- 1 D isabled Enabled 2 E nabled Disabled Console# show dot1x advanced etherne t ext.
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 405 Appendix A: Getting Help Wo r l d W i d e W e b http://support.intel.
406 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide In Asia-P acific Region Australia .... 1800 649931 Cambodia .. 63 2 636 9797 (v ia Philippines) China ......... 800 820 1 100 (toll-free) ................... . 8 621 33104691 (not toll-free) Hong Kong 852 2 844 4456 India .
Intel® Blade Server Ethernet Switch Mo dules SBCEGBESW1 and SBCEGBESW10 CLI Guide 407 Colombia ... Contact A T&T USA at 01 800 91 1 0010. Once connected, dial 800 84 3 4481 Costa Rica . Contact A T&T USA at 0 800 0 1 14 1 14. Once connected, dial 800 843 4481 Ecuador (Andimate) .
408 Intel® Blade Server Ethernet Switch Modul es SBCEGBESW1 and SBCEGBESW10 CLI Guide.
デバイスIntel SBCEGBESW1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Intel SBCEGBESW1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIntel SBCEGBESW1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Intel SBCEGBESW1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Intel SBCEGBESW1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Intel SBCEGBESW1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIntel SBCEGBESW1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Intel SBCEGBESW1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIntel SBCEGBESW1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。