IntermecメーカーPW50Aの使用説明書/サービス説明書
ページ先へ移動 of 50
PW 50 W orkboard Printer User Guide.
ii PW50 Workboard Printer User Guide Intermec T echnologies Corporation W orldwide Headquarters 6001 36th Ave.W . Everett, W A 98 203 U.S.A . www.intermec.
PW50 Workboard Printer User Guid e iii Document Change Record This page records changes to this document. The document was originally released as Revision 001. Ve rs i o n Nu m b e r Date Description of Change 005 6/2012 Added information about the Lexan Cover, an adhesive fanf old media cover .
iv PW50 Workboard Printer User Guide.
Contents PW50 Workboard Printer User Guid e v Contents Before Y ou Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety Information . . . . . . . . . . . . .
Contents vi PW50 Workboard Printer User Guide Downloading Fonts and Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Upgrading the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . .
Before You Begin PW50 Workboard Printer User Guid e vii Before Y ou Begin This section provides you with safe ty inf ormation, technical support information, and sources f or additional product information. Safet y Inform ation Y o ur safety is extremely im portant.
Before You Begin viii PW50 Workboard Printer User Guide Observe all safety and accident pr evention regulations applicable to your specif ic region and application.
Before You Begin PW50 Workboard Printer User Guid e ix Send Feedback Y o ur feedback is crucial to th e continual improvement of our documentation. T o provide feedba ck about this manual, please contact the Intermec T echnical Communications department directly at T echnicalCommunications@intermec.
Before You Begin x PW50 Workboard Printer User Guide If your product does not have its o wn product page, click Suppo rt > Manuals . Use the Product Categor y , the Product Family , and the Product to f ind your documentation.
1 1 Using the PW50 W orkboard Printer Use this chapter to familiarize yourself with the PW50 W orkboard Printer . This chap ter contains these sections: • Learning About the PW50 W orkboard Printer .
Chapter 1 — Using the PW50 Workboard Printer 2 PW50 Workboard Printer User Guide Learning About the PW50 W orkboard Printer The PW50 is a rugged direct thermal receipt printer that is designed for use with these Intermec mobile computers: • CN3 and CN3e • CK61 and CK61ex • CN70 and CN70e The PW50 provides: • print resolution of 203 dpi.
Chapter 1 — Using the PW50 Workboard Printer PW50 Workboard Printer User Guid e 3 Understanding the Ports and Optional Card Reader The PW50 ports are located on the bottom of the printer. PW50 Por ts: Use this illustra tion to familiarize yourself with the PW50 ports.
Chapter 1 — Using the PW50 Workboard Printer 4 PW50 Workboard Printer User Guide Understanding the Control Panel The PW50 control panel contains two buttons and four LED indicators.
Chapter 1 — Using the PW50 Workboard Printer PW50 Workboard Printer User Guid e 5 Understanding the Printer Sounds The PW50 plays sounds in response to several actions that you can take with the printer. Use the follo wing table to underst and when the sounds occur and what they mean.
Chapter 1 — Using the PW50 Workboard Printer 6 P W50 Workboard Printer User Guide Installing the Batter y Make sure you fully charge the battery before you use y our PW50. Y ou can charge the batter y before or after you install it in the PW50. T o install the batter y 1 Lay the PW50 upside down on a f lat surface.
Chapter 1 — Using the PW50 Workboard Printer PW50 Workboard Printer User Guid e 7 Charging the Batteries There are two ways to charge the PW50 battery: • Connect power to the printer whil e the batter y is inst alled. • Use the AC18 4-bay battery charger.
Chapter 1 — Using the PW50 Workboard Printer 8 PW50 Workboard Printer User Guide Remember that any rechargeable battery loses its ability to mainta in a charge over time. Y ou can only recharge it a f inite number of times before you must replace it.
Chapter 1 — Using the PW50 Workboard Printer PW50 Workboard Printer User Guid e 9 2 Press the blue media cover release button to open the cov er. 3 Insert the media. • If you are using roll media, mak e sure you load the media counter -clockwise so that it pulls off the core from the bottom of the printer.
Chapter 1 — Using the PW50 Workboard Printer 10 PW50 Workboard Printer User Guide 4 Pull out approximately 8 cm (3 in) of the media. 5 Close the media cover . 6 Press down on the cov er until it latches. The printer emits the hardware sound to tell you that the media door closed correctly .
Chapter 1 — Using the PW50 Workboard Printer PW50 Workboard Printer User Guid e 11 2 Press and hold the Standby and Feed buttons until the PW50 beeps. 3 Release the buttons. 4 The PW50 prints a testprint and st arts T est Mode. For more information, see “Understanding T est Mode” on page 20 .
Chapter 1 — Using the PW50 Workboard Printer 12 PW50 Workboard Printer User Guide Inserting a Mobile Computer The PW50 is designed for use with the CN3, CN3e, CK61, CK61ex, CN70, and CN70e mobile computers. T o insert a mobile computer • Slide the computer into the slot on the PW50 until the computer snaps into place.
13 2 Co nfiguring the PW50 This chapter describes how to configu re the PW50 and contains these sections: • Conf iguring the PW50 • Establishing Communications With a Host • Communicating with t.
Chapter 2 — Configuring the PW50 14 PW50 Workboard Printer User Guide Configuring the PW50 T o change the PW50 conf iguration settings, you must send commands from a host PC directly to the PW50 using a communications application and a serial connection.
Chapter 2 — Configuring the PW50 PW50 Workboard Printer User Guid e 15 The PW50 cannot initiate a Bluetooth connection. One of the devices, such as a CN3 mobile computer, must request a connection with the printer . The PW50 then accepts or rejects the connection.
Chapter 2 — Configuring the PW50 16 PW50 Workboard Printer User Guide T o set up Bluetooth communications with a scanner 1 Make sure that the PW50 is not connected to a serial cable.
Chapter 2 — Configuring the PW50 PW50 Workboard Printer User Guid e 17 T o connect the PW50 to a PC 1 Connect the 8-pin circular DIN connector on the serial cable (P/N 075497-001) to the serial port on the PW50. 2 Connect the other end of the serial cable to a serial port on the back of your PC.
Chapter 2 — Configuring the PW50 18 PW50 Workboard Printer User Guide The PW50 smart card reader supports these Microsoft APIs: • SCardEstablishContext • SCardListReaders • SCardConnect • SCardT ransmit • SCardDisconnect • SCardReleaseContext Downloading Fonts and Graphics Y o u can download fonts and graphics: • using PrintSet.
Chapter 2 — Configuring the PW50 PW50 Workboard Printer User Guid e 19 Upgrading the Firmware Y o u can download firmware to your PW50 from a host PC using a serial connection. T o upgrade your firmware, you need to send a .upg f ile to the PW50 that follows this f ormat: PW50f xxxx _ mmddyy .
Chapter 2 — Configuring the PW50 20 PW50 Workboard Printer User Guide Understanding the Printer Modes The PW50 has fi ve modes to help you effectively interact with the printer: Ready , Pause, Error, T est, and Upgrade. Use the following sections to understand the dif ferent printer modes.
Chapter 2 — Configuring the PW50 PW50 Workboard Printer User Guid e 21 Using T est Mode T est mode consists of a sequence of events that req uires very little interaction. Extended T est mode requires more interaction and lets you choose which actions you want the printer to per form.
Chapter 2 — Configuring the PW50 22 PW50 Workboard Printer User Gu ide Using Extended T est Mode Use Extended T est mode to run addi tional diagnostic tests, includin g printing specif ic testprints, entering Dump mode, and resetting to factor y defaults.
Chapter 2 — Configuring the PW50 PW50 Workboard Printer User Guid e 23 T o restore the factor y default settings 1 Press the Fee d button to enter Factory Default mode. The status LED is steady red. 2 Press the blue media cover release button to open the media cov er.
Chapter 2 — Configuring the PW50 24 PW50 Workboard Printer User Guide.
25 3 T roubleshooting and Maintaining the PW50 This chapter contains information to help you solve problems you may encounter while using the PW50 and cont ains these sections: • Troubleshooting the.
Chapter 3 — Troubleshooting and Maintaining the PW50 26 PW50 Workboard Printer User Guide T roubleshooting the PW50 Y o u may ha ve printer operation, print quality , or printer communication problems at some time during the life of the PW50 printer .
Chapter 3 — Troubleshooting and Maintain ing the PW50 PW50 Workboard Printer User Guid e 27 Understanding Error Messages Use the following tables to troubl eshoot common errors. T o receive error messages, you need to turn on the Allow Messages From Printer command.
Chapter 3 — Troubleshooting and Maintaining the PW50 28 PW50 Workboard Printer User Guide Y ou press the Standby button, but the prin ter does not enter Standby mode and the Intermec Ready-to-W ork indicator starts blinking. The printhead may be too ho t.
Chapter 3 — Troubleshooting and Maintain ing the PW50 PW50 Workboard Printer User Guid e 29 T roubleshooting Communication Problems Use T est mode to ver ify that the printer is receiving data from the host correctly . For help, see “Understanding T est Mode” on page 20 .
Chapter 3 — Troubleshooting and Maintaining the PW50 30 PW50 Workboard Printer User Guide T o cold boot the PW50 1 Disconnect the PW50 from power if externally pow ered. 2 Remove the battery from the PW50 for at least one second. 3 Insert the batter y back into the PW50.
Chapter 3 — Troubleshooting and Maintain ing the PW50 PW50 Workboard Printer User Guid e 31 Cleaning the PW50 Printer Printer Part Cleaning Method Cleaning Interval Platen roller Rotate the pl aten roller and clean it thoroughly using a cleaning swab (P/N AE2603 4).
Chapter 3 — Troubleshooting and Maintaining the PW50 32 PW50 Workboard Printer User Guide.
33 A Specifications.
Appendix A — Specifications 34 PW50 Workboard Printer User Guide Specifications Physical Dimensions Dimension Va l u e Length 32.5 cm (12.8 in) Width 18.
Appendix A — Specifications PW50 Workboard Printer User Guid e 35 Receipt roll stock media is supplied as a continuous roll. Fanfold media uses repeat indicators for no n-continuous media.
Appendix A — Specifications 36 PW50 Workboard Printer User Guide When ordering media for the PW50 printer, keep these points in mind: • Y o u can use higher caliper media in the printer, but print quality will be reduced. • Receipt roll stock media has an end of roll indicator.
Appendix A — Specifications PW50 Workboard Printer User Guid e 37 Accessories fo r the PW50 Y o u can use these accessories (sold and ordered separately) with the PW50 printer. T o order accessories, contact your local Intermec sales representative.
Appendix A — Specifications 38 PW50 Workboard Printer User Guide Serial Cable The serial cable (P/N 075497-001) is an 8-pin DIN to DB9 connector that connects the printer to your desktop PC. USB Cable The USB cable (P/N 321-611-102) is a USB-A to USB-Mini B connector that connects the printer to your desktop PC.
.
Worldwide Headquarters 6001 36th Avenue W est Everett, Washington 98203 U. S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2012 Intermec T echnologies Corporation.
デバイスIntermec PW50Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Intermec PW50Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIntermec PW50Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Intermec PW50Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Intermec PW50Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Intermec PW50Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIntermec PW50Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Intermec PW50Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIntermec PW50Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。