Interphase TechメーカーU1-BBFF-DFNの使用説明書/サービス説明書
ページ先へ移動 of 35
50-200 FISH FINDER Dual Frequency 50 & 200kHz Black Box Fish Finder CODE: B-300806 User Manual Copyright 2006 Interphase Technologies Inc. All rights reserved.
4 User Manual Contents Important Information ............................................................................... 6 WARRRANTY STATEMENT ............................................................................... 6 CAUTION ..............
5 User Manual 3.1.10.4 Fish Symbols ........................................................................ 21 3.1.10.5 Water Temperature ............................................................... 22 3.1.11 Transducer Setup .....................
6 User Manual Important Information WARRRANTY STATEMENT Interphase T echnologies, Inc. warrants this unit to be free from defects in material and workmanship. During the w arranty period, Interphase T echnologies, Inc. will repair or replace any component which fails in normal use without charges for parts or labour .
7 User Manual About this User Manual INTRODUCTION The chart plotter combined with the sonar performance of the Fish Finder is one of the most advanced marine navigation system available. Please read carefully this User Manual to learn the operating features for your unit.
8 User Manual HOW THIS USER MANUAL IS ORGANIZED ♦ CHAPTER 1: Overview Introduction to the basic information on the Fish Finder , its features and use. ♦ CHAPTER 2: Fish Finder Helps you understand how the chart plotter is connected to the Fish Finder and how to operate to impro ve your fishing.
9 User Manual 1 . Overview The Fish Finder consists of a high power transmitter , sensitive receiver and a transducer . The Fish Finder sends an electrical pulse to the transducer which contains an element that converts the pulse into acoustic (sound) wave which is sent through the water .
10 User Manual ♦ STC (allows reducing or eliminating the surface clutter) ♦ Interference Rejection (allows reducing interference from other boats/ Fish Finders) ♦ Noise Filter ♦ Fish Symbol feature (*) ♦ Automatic T ransducer Setup.
11 User Manual 2 . Fish Finder This chapter is intended to help you understand how the chart plotter with the Fish Finder connected operates to improve y our fishing. 2.1 UNDERSTANDING THE FISH FINDER PAGE The display on chart plotters shows a history of time of the echoes received by the transducer .
12 User Manual Digital Depth Readout of the current bottom depth. Water Temperature Readout of the current water temper ature returned by the TEMP 1 sensor included into specific transducers. Alarm Bar Bars showing the shallow water and deep water alarm v alues.
13 User Manual fish, causing a display pixel to be turned on. As the boat passes over the fish, the distance to the fish decreases turning each pixel on at a shallower depth on the display .
14 User Manual Fig. 2.2.1 - Page Selection menu The menu now shows four selections related to the Fish Finder , Full Display, 50/ 200kHz Full Display, Zoom Full Display and Chart/Fish display . Move the cursor to select the desired item and then press [ENTER] .
15 User Manual Fig. 2.2.2a - Sensitivity sub-menu Pressing [CLEAR] turns off the Sensitivity menu. The CLEAR key By pressing [CLEAR] the Variable Depth Mark er (VDM) is hidden.
16 User Manual Fig. 2.2.4 - Fish Finder Zoom Page The Depth Cursor is shown only on the unzoomed Fish Finder Display . The ZOOM IN and ZOOM OUT keys From this page pressing [ZOOM IN] changes to Z oom 4X, pressing [ZOOM OUT] changes to Z oom 2X.
17 User Manual Fig. 2.2.6 - Radar/FF page Otherwise to display the Radar and Fish Finder Combo pages, follow this procedure: [PAGE] + "Radar/FF/Chart/Nav Data" + [ENTER] Fig. 2.2.6a - Combo page When in Split/Combo pages, the active view is highlighted by a focus (Y ellow frame).
18 User Manual below the bottom of the screen, automatically moves up/down the current zoomed Fish Finder Display view and re-position the V ariable Depth Marker (VDM) at the center of the screen. NOTE Pressing [CLEAR] hides the Depth Cursor and if the Fish Finder is in Auto Range or Bottom Lock mode switches into Bottom Lock Zoom mode.
19 User Manual 3 . Setup your Fish Finder 3.1 FISH FINDER SETUP MENU The Fish Finder Setup menu provides access to additional functions, setup and layout/data field options. From the Fish Finder page, access this menu by pressing: [MENU] Fig. 3.1 - Fish Finder Setup menu 3.
20 User Manual Bottom Lock. [MENU] + "BOTTOM RANGE" + [ENTER] 3.1.5 Depth This option is available only when R ange Mode is Manual and it is disabled in Auto Range and Bottom Lock Mode. [MENU] + "DEPTH" + [ENTER] 3.1.6 Shift Shows the depth from which start the bottom scanning.
21 User Manual increases. This is for the purpose of filtering out surface clutter . 3.1.9.4 STC Length If STC is Custom, it is possible to change the Length of the Sensitivity Time Constant. 3.1.9.5 STC Strength If STC is Custom, it is possible to change the Strength of the Sensitivity Time Constant.
22 User Manual Icon : shows Fish icons Icon + Depth : shows Fish icons and their depth (accordingly to currently selected depth unit) The Fish icons displayed are among four different shapes depending on the size of the T arget (Small, Med, Big, Huge).
23 User Manual Fig. 3.1.12 - Fish Finder Alarms menu 3.1.12.1 Shallow Water T riggers an alarm when depth becomes shallower than the value set. 3.1.12.
24 User Manual.
25 User Manual 4 . 50-200 FISH FINDER This chapter provides instructions to assist in planning the installation of the 50-200 FISH FINDER. 4.1 TECHNICAL SPECIFICATIONS ♦ Display Colors : 1 6 colors .
26 User Manual When the package containing the 50-200 FISH FINDER is first opened, please check it for the following contents (if any parts are missing contact the dealer the 50-200 FISH FINDER was purchased from): ♦ 50-200 FISH FINDER (with P ower Serial and optional devices cables already connected) ♦ User Manual 4.
27 User Manual Fig. 4.3.1 - The 50-200 FISH FINDER Installation ♦ Fix the 50-200 FISH FINDER to the mounting location using the four screws (holes diameter 4 mm), see Fig. 4.3.2. ♦ Route the CHAR T PLOT TER cable to the chart plotter . ♦ Mount the transducer according to the instructions provided with it.
28 User Manual 4.5 EXTERNAL CONNECTIONS Fig. 4.5 - 50-200 FISH FINDER External Wiring 4.6 POWER SUPPLY WIRING DIAGRAM W e recommended the installation of a switch and a (5A) fuse in the positive DC supply to the 50-200 FISH FINDER.
29 User Manual In the example below you will notice the positive DC power connection is run through a switch and a fuse before connecting it to the 50-200 FISH FINDER and the chart plotter .
30 User Manual Fig.4.7a - Connection to the Fish Finder for chart plotter with 8 pin Power & I/O connector.
31 User Manual 5 . Transducers The transducer is a device that transmits and receives sound w aves into the water . The active component inside the transducer is commonly referred to as an element but actually is a piezoelectric ceramic material. Please refer to your dealer and/or installer to choose your transducer .
32 User Manual.
33 User Manual 6 . Frequently Asked Questions 6.1 How can I disconnect the cables from the 50-200 FISH FINDER in case I need to do so for the installation? ♦ Open the 50-200 FISH FINDER box unscrewing the four screws (see the following figure). Fig.
34 User Manual Fig. 6.1b - The 50-200 FISH FINDER (III) 6.2 How can I set optimal operating parameters. Optimal operating par ameters can be set accordingly with the intended use of the Fish Finder , .
35 User Manual 6.7 What should I do if the auto modes fail? F ailure of auto modes can happen for various reasons. Hereafter you can find a range of possibilities. 6.8 Auto-range fails in very shallow waters displaying a digital depth readout deeper than the actual value.
36 User Manual 6.12 Why do I never see fish in the range between 0 to 0.7 meters? The minimum range of the fish finder is 0.7 meters. In this interv al the Fish Finder can detect neither the bottom nor any target. 6.13 How can I reduce the surface clutter? Y ou can act by: properly setting the STC as described at 6.
37 User Manual Index 50-200 FISH FINDER ................................. 26 50/200kHz Full Display .............................. 14 A A-Scope ............................................... 9, 12 Alarm ..................................... 10, 12, 22, 23 Alarm Bar .
デバイスInterphase Tech U1-BBFF-DFNの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Interphase Tech U1-BBFF-DFNをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはInterphase Tech U1-BBFF-DFNの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Interphase Tech U1-BBFF-DFNの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Interphase Tech U1-BBFF-DFNで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Interphase Tech U1-BBFF-DFNを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はInterphase Tech U1-BBFF-DFNの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Interphase Tech U1-BBFF-DFNに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちInterphase Tech U1-BBFF-DFNデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
