IOGearメーカーGUWH104KITの使用説明書/サービス説明書
ページ先へ移動 of 38
1 GUWH104KIT P ART NO. M0427 Installation Installation Installation Guide Wireless USB Hub and Adapter.
.
3 W elcome Thank you for purchasing one of the most user -friendly Wireless USB devices on the market. IOGEAR’ s Wireless USB Hub and Wireless USB Host Adapter are top of the line when it comes to Wireless USB connectivity , implementing the use of Ultra-W ideband (UWB) to achieve data transfer speeds comparable to USB 2.
4 T able of Contents Welcome 3 Introduction 5 Features 6 Requirements 7 Package Contents 8 Device Overview 9 Installation 10 Hardwar e Preparation 11 Software Installation 12 Driver Installation 18 Ad.
5 Introduction IOGEAR’ s Wireless USB allows you to connect your USB peripherals and computer with all the ease and speed of USB 2.0 without the use of USB cables and extenders between the PC and your Wireless USB Hub. Gain all of the advantages of USB 2.
6 Features Wireless USB 2.0 speed through UWB medium • Simple hardwar e interface • Easy Installation has you connected in minutes • Solid 3-year limited warranty •.
7 Requirements PC System requir es Windows XP (with SP2 and .NET Framework 2.0) or Windows Vista • Available AC outlets in the r oom • Available USB ports • Software r equires Windows and CD-ROM.
8 Package Contents 1 x Wireless USB Hub GUWH104 1 x Wireless USB Host Adapter GUWA100U 1 x Wireless USB Hub Antenna 1 x Wireless USB Hub Power Supply 1 x USB T ype A to mini-B Cable 1 x Extension / Sw.
9 Device Overview Side View: T op View: 1. Host Selection button 2. Active Host LEDs 3. Power LED The default and recommended setting is to operate in Auto Association mode. In this mode, the Wireless USB Hub will automatically connect to the Wireless USB Host Adapter .
10 Installation Before we get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surf.
11 Hardwar e Preparation Do not connect the Wireless USB Host Adapter to your computer until you are instructed to do so 1. later in the section titled “Driver Installation.” Remove the Wireless USB Host Adapter , W ireless USB Hub, USB 2.0 A to Mini B Cable, power 2.
12 Software Installation Please always check www .iogear .com for the latest drivers. IMPORT ANT NOTE : If your PC already has a version of this software installed, please be sure to un-install it before proceeding. Use Control Panel -> Add or Remove Programs.
13 Microsoft .NET Framework 2.0 is r equired by the UWB software. Once you begin the software installation, if .NET Framework 2.0 is not installed on your PC, the software will automatically prompt you to install befor e proceeding to the UWB softwar e installation.
14 The following window will display the status of the installation process. Depending on the particular system, this may take a few minutes to complete. Once .NET Framework 2.0 is installed, the UWB software will automatically begin the installation process.
15 The following window will request that you 3. agree to the License Agr eement before pro- ceeding with installation, select Y es. The window shown below allows you to select 4. where the fi les for WiCenter are installed and stored. Once you have made your selections select - Next.
16 The following window con fi rms that you are 5. approving installation, select - Next. Once you have selected Next the WiCenter 6. software will begin installation and show the status in a window similar to the one shown below .
17 Once all the software has been installed 7. properly , you will see a window similar to the following stating installation has completed. Select “Finish” to fi nalize the software installation. After the software has fully installed, 8. restart the PC.
18 Driver Installation V erify that WiCenter is running by double-clicking on the WiCenter icon created on the desktop during the installation process. The fi rst time that W iCenter is launched, the Wireless USB Connection Wizard will appear and will guide you through the Wireless USB connection process.
19 STEP 1. V erify that the Wireless USB Host Adapter is con- nected to the extension/swivel adapter provided in the box. Plug the Wireless USB Host Adapter into an available USB port making sure that the extension/swivel adapter is adjusted to a 45 degree angle which will maximize range.
20 STEP 2. V erify that the Wireless USB Hub switches are set to Wireless and Automatic Association mode. Also, verify that the antenna is securely attached to the Wireless USB Hub and is pointed in a vertical position. Power on the Wireless USB Hub. Click Next to continue.
21 STEP 3. Plug the Wireless USB Hub into the PC with the USB 2.0 A to mini-B cable provided. Windows should state a new device has been detected and automatically install the necessary drivers for the Wireless USB Hub. Once the drivers have installed, click Next to continue.
22 The below window will pair the Wireless USB Hub to your PC. Select Automatic wireless reconnection (Recommended) and select Next. Once the association is successful and the Active HOST LED has stopped fl ashing on the W ireless USB Hub, unplug the USB cable from the Wireless USB Hub in order to establish the wir eless link.
23 When the link has been successfully created, you will see the following appear from the System T ray . The following screen will indicate that the wir eless connection has been established with the Wire- less USB Hub.
24 Select the View Console option in WiCenter to view all available and connected Wireless USB devices in range. In order to view devices connected to the Wireless USB Hub click the [+] and it will bring a dropdown of all peripherals currently connected and available.
25 The advanced settings of WiCenter allow you to make changes related to the Channel that data is being transmitted on. The following shows the Advanced Settings tab which can be accessed by clicking on Settings My Wireless USB Radio Settings, and then selecting the Advanced tab on the window that appears.
26 If the Channel needs to be changed manually , the following fi gure shows the available channels for selection..
27 Once a channel has been changed manually , the following window will appear indicating that the connection will be lost to the Wireless USB Hub while the channel is changed. Click Y es to change the channel. Once the channel is changed, the Wireless USB Hub will automatically re-connect.
28 Frequently Asked Questions Problem: 1. WiCenter UWB Software r eports errors when trying to use the Wireless USB Host Adapter and Wireless USB Hub on Windows XP operating system. Solution: V erify that Service Pack 2 (SP2) has been installed on your PC.
29 Problem: 5. Host LED blinking on the Wireless USB Hub. Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply from the Wireless USB Hub. Re-insert Wireless USB Host Adapter , connect the power supply to the Wireless USB Hub and wait for the wireless connection.
30 Problem: 8. Wireless USB Hub will not associate with the Wir eless USB Host Adapter . Solution: V erify that the WiCenter software is running by double-clicking on the W iCenter icon created on the desktop during the installation pr ocess.
31 When printing to the printer when it is connected to the Wireless USB Hub, verify that the correct printer is being selected in the printer options window by selecting the correct model name to print to. Problem: 11. The IOGEAR Wireless USB Hub does not show up in the Console window when connected wirelessly to the Wireless USB Host Adapter .
32 T o help IOGEAR ® customers obtain the highest level of performance from their Wireless USB devices, the IOGEAR ® Service Support team is available to answer your technical questions. Do not hesitate to call if you are having tr ouble getting your device to work correctly .
33 What is the purchase date and serial number of the pr oduct? 1. Wer e any messages displayed on the screen when the error occurred? If so, what was the exact 2. wording of the message? What type of Computer are you using? 3. When does the problem occur? 4.
34 IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDEN- T AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT .
35 This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer ence received, including interfer ence that may cause undesired operation.
36 IOGEAR, INC. 23 Hubble Irvine, CA 92618 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2007 IOGEAR. All Rights reserved. Part No. M0427 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
37.
© 2007 IOGEAR, INC. FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces.
デバイスIOGear GUWH104KITの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
IOGear GUWH104KITをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIOGear GUWH104KITの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。IOGear GUWH104KITの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。IOGear GUWH104KITで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
IOGear GUWH104KITを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIOGear GUWH104KITの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、IOGear GUWH104KITに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIOGear GUWH104KITデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。