IOGearメーカーGWFRSDUの使用説明書/サービス説明書
ページ先へ移動 of 103
GWFRSDU PART NO. M1240 M e d i aS h a i r H ub w/ S D / US B I n p u t & B ui lt -i n Po we r S t at io n.
2 Table of Contents Package Contents .................................................................................................................................. 7 System Requirements .............................................................
3 Sharing Documents (iPod ® /iPhone ® /iPad ® ) ......................................................................................... 19 Sharing Options: ................................ .........................................................
4 Audio Playback Controls: ...................................................................................................................................... 44 2. Media Playback - Movie/Video Files (Android ® Devices) ...........................
5 Wireless Connectio n Setup: ................................................................................................................................... 63 1. Wireless Security Setting s – Device Name: ......................................
6 Network Options: .................................................................................................................................................. 88 1. Host Name: ....................................................................
7 Package Contents 1 x MediaShair Wireless Media Hub 1 x USB to Micro-USB Cable 1 x Car Charger 1 x User Manual 1 x Warranty Card System Requiremen ts Wi-Fi equipped wireless devices SD Card or external USB Storage device with Media Content Mobile devices require either Android 2.
8 Getting Started MediaShair Mode: 1. MediaShair mode is the normal operating mode which enables all feature s and functions of the device. The Powerstation mode (described in the next section) turns o n only the charging output, and keeps the rest of the unit functions off to save power.
9 If at any point your MediaShair Hub is not operati ng correctly or if the pre -shared key is lost, you will need to perform a hard reset to restore t he MediaShair Hub to Factory Default Settings. a. Locate the Reset Button on the back of the unit. b.
10 Enter the default password 12345678 and tap Join to connect. c. Wi-Fi will display MediaShair- XXXX. d. Viewing MediaS hair Hub Content (iPod ® /iPhone ® /iPa d ® ) Accessing and Viewing Content: 1.
11 Insert a SD Card, USB Flash Drive or External Hard Drive with movies, music, photos a. or files. Make sure the MediaShair- XXXX Wi-Fi network is connected. b. Open the MediaShair App on your iOS device. c. On the Home screen, tap the MediaShair button to show the SD Card and/ or USB d.
12 Using the Function Buttons: 2. Home Button - Tap to bring you back to the Main Screen View Button - Tap to switch between List and Thumbnail views. Settings Button - Tap to change the MediaShair Hub Wi-Fi and Internet configurations. Back Button - Tap to view the previous screen.
13 Track Back - Tap once to restart currently playing track. Tap twice to play previous track. Track Forward - Tap once to play next track. Play/Pause / - Tap to pause or to begin/resume current track. Stop -Tap to stop the song currently playing.
14 By default, the video playback is in Landscape mode. Please Note: Only file formats c. supported by iOS will be viewable. Movie Playback Controls: 2. Play/Pause / - Tap Play button to begin/resume the video. Tap Pause to pause the video. Rewind/Start Over - Tap and hold to rewind the video during playback.
15 Tap the thumbnail and the photo will open automatically. *Please Note: Only file b. formats supported by iOS will be viewable. Photo Viewing Controls: 2. Thumbnail/List View – Photos can be viewed as either Thumbnails or as a List. To toggle between these viewing modes, simply tap the View button .
16 Background Music - Tap this to add music to your slideshow. Setting Background Music: 4. Press Select, then tap the folder that has music files available. a. Tap any song (or songs) to select it for playback, a green checkmark will appear. b. Selected music will begin playing.
17 To share to iOS Camera Roll: b. To add the selected photo to your camera roll, tap the Add to Pho to button. A notification will let you know when saving is complete. To upload to Facebook: c. i. To upload the selected photo to Facebook, tap the Upload to Facebook button.
18 ii. You will be redirected and prompted to log-in and allow access for WiFi- Storage. Tap OK and your photo will be uploaded. Please Note: To upload to Facebook, you MUST have the Facebook App on your device. Opening and Viewi ng Documents (iPod ® /iPhon e ® /iPad ® ) iOS Supported Formats: 1.
19 b. Tap the file name and the document will open in viewer mode. Sharing Documents (iPod ® /iPhon e ® /iPad ® ) Sharing Options: 1. Email is the only supported sharing method at this time. Sharing Documents: 2. a. Select the document to share.
20 c. Tap the Email button and the default email app will launch with the document attached. d. Type in the email addres s, subject, and any message then press send.
21 Downloading Files t o My Device (i Pod ® /iPhone ® /iPa d ® ) Select Download Source: 1. Insert a SD Card or connect a USB Flash Drive or External Hard Drive with movies, a. music, photos or files. Make sure the file format is supported by the mo bile device.
22 Select the root folder for SD card or USB. d. Select a sub folder to open (if any) then tap a file to select for download. A green e. check mark will indicate the files selected. To unselect a file, ta p the file again and the green check mark will disappear.
23 Tap the Download button and select Local, then select from Files, Movies, Music, or f. Photos as the location to transfer the file. Please Note: If there is both a USB storage device and SD card inserted in the MediaShair Hub, you can also select the alterna te storage device as a destination for the transfer.
24 After a destination is chosen, tap Confirm and the download will begi n. h. A status screen showing the progress of the trans fer will be displayed.
25 Tap Done to exit Manage Mode. j. Viewing My Device Content (iPod ® /i Phone ® /iPad ® ) Notes on Content: 1. Files downloaded to the My Device folder within the MediaShair app may be viewed at any time, without requiring connection to the MediaShair Hub.
26 Uploading Files t o MediaShair (iPod ® /iPhone ® /iPad ® ) Notes on Content: 1. Only content stored in My Device or photos in the Camera Roll may be transferred from your device to a USB or SD storage device at tached the MediaShair Hub. Uploading a File: 2.
27 Tap the Manage button. d. Select a sub folder to open (if any) then tap a file or files to select for upload. A e. green check mark will indicate the files selected.
28 Tap the Upload button and select the destination from the listed options. f. You can also create a folder where the files will be saved. After selecting a file to g. upload, tap Create Folder. Enter a name for the new folder and tap Done. The file will be able to be saved in the newly created folder.
29 After a destination is chosen, tap Confirm and the upload will begin. h. The status screen shows the progress of the transfer. Once finished tap X to close, i. then tap Done to exit Manage Mode. Deleting Stored C onte nt (iPod ® /iPhone ® /iPad ® ) Deleting Files from MediaShair: 1.
30 Make sure the MediaShair- XXXX Wi-Fi network is connected. b. Tap MediaShair then tap Manage. c. Select SD or USB storage, then select the file(s) to delete. A green check mark will d. indicate the file(s) selected. Tap the file again to unselect it.
31 To exit Manage Mode, tap the Done button. f. Deleting Files From My Device: 2. . Tap My Device then tap Manage to delete files from your iOS device. a. Select a folder, then select the file(s) to delete. A green check mark will indicate the b. file(s) selected.
32 Select a folder and then select a file to delete by tapping on it. A green check mark c. will indicate the file(s) selected. Tap the file again to unselect it. Tap the Delete button then at the warning message Tap OK to confirm or Cancel to d. go back.
33 Transferred Con tent (iPod ® /iPhone ® /iP ad ® ) Checking File Transfer Status: 1. To check the history of downloaded or uploaded files between the MediaShair Hub and your device, tap the More button , then tap Transfer. All recently queued/transferred files will appear.
34 Connect an Ethernet cable from the modem to the RJ-45 Ethernet connector on the b. MediaShair Hub. From the App Home Screen, tap Settings. c. Select Internet Settings to bring up the option for Wired Access (default) or d. Wireless Access. Select Wired Access and tap Set.
35 Configure the wired connection by tapping IP Settings e. IP Settings: 2. Option 1: DHCP (Default) a. This option is used when your router automatically configures devices that are connected directly to it. DHCP is the default setting. Option 2: Static IP b.
36 iii. The MediaShair Hub will need to reboot to apply the changes. Tap OK to confirm, then reconnect to the MediaShair-XXXX network when finished. Wireless Inter net Connection (iPo d ® /iPhone ® /iPad ® ) Wireless Connection Setup: 1. Make sure the MediaShair Hub is powered on and your device is connecte d the a.
37 Select Internet Access to bring up the option for Wired Access (default) or Wireless c. Access. Select Wireless Access and tap Set. Under Configure your Wi-Fi connection, select a wireless network and enter the d. password (p re -shared network key).
38 Wireless Security Settings – Device Name: 2. To change the name of your MediaShair Hub tap Device Name. a. Enter the new name into the SSID box then tap the Set but ton.
39 Wireless Security Settings – Security Options: 3. To change the security mode and/or pre-shared network key: a. i. Tap Security Options ii. To change the Security Mode, select the desired security mode from the list then tap the Set button or skip to step 3 to change the security key.
40 iv. The MediaShair Hub will need to reboot to apply the changes. Tap OK to confirm, then reconnect to the MediaShair-XXXX network when finished..
41 MediaShair Hub S etup (Androi d ® Devices) MediaShair Power Up: 1. Press and hold the power button for 5 seconds to turn on th e MediaShair Hub. The green power LED will turn on. The blue Wi- Fi LED will begin flashing then turn solid when the Wi-Fi network is live.
42 Choose Media Sh air-XXXX network (-XXXX is the last 4 digits of the device’s MAC ID). b. Enter the default password 12345678 and tap Connect to join. Wi-Fi will display c. MediaShair- XXXX. Viewing MediaS hair Hub Content (Android ® D evices) Accessing and Viewing Content: 1.
43 Make sure the MediaShair- XXXX Wi-Fi network is connected. b. On the Home screen, tap the MediaShair button to show the SD Card and/ or USB c. contents. Tap the Root folder, then tap the file you wish to acc ess and pla yback will begin d. automatically.
44 Back Button – Tap to view the previous screen. Manage Button – Tap to Share, Download, Upload, Transfer a nd Delete files. My MediaShair - Tap to access content on storage devices conne.
45 Track Back - Tap once to restart currently playing track. Tap twice to play previous track. Track Forward - Tap once to play next track. Play/Pause / - Tap to pause or to begin/resume current track . Stop -Tap to stop the song currently playing.
46 Fit to Screen - Tap the Fit to Screen button to scale the video file to fill yo ur device’s screen. Media Playback - Photo Files (Andr oid ® Devices) Viewing Photo Files: 1. Locate the photo file that you would like to view. a. Tap the thumbnail and the photo will open automatically.
47 Single Slideshow - Tap the Single Slideshow button to play the slideshow once, stopping after the last photo is displayed. Pause Slideshow - Tap the Pause button to pause the sli deshow.
48 To add the selected photo to your photo gallery, tap the Add to Photo button. A b. notification will let you know when saving is complete. Opening and Viewi ng Documents (Android ® D evices) Supported Formats: 1. Excel Word PowerPoint PDF TXT Viewing Documents: 2.
49 b. Tap the file name and the document will open in viewer mode. Downloading Files t o My Device ( Android ® Devic es) Select Download Source: 1. a. Insert a SD Card or connect a USB Flash Drive or External Hard Drive with movies, music, photos or files.
50 c. Tap the Manage button. d. Select the root folder for SD or USB..
51 e. Select a sub folder to open (if any) then tap a file to select for download. A blue check mark will indicate the files selected. To unselect a file, ta p t h e selec ted file and the blue check mark will disappear. Tap the Download button and select My Device, then select from Documents, f.
52 After a destination is chosen, tap Confirm and the download will begi n. h. The status screen shows the progress of the trans fer. Once finished, tap X to close .
53 Viewing My Device Content (An droid ® Devices) Notes on Content: 1. Files downloaded to the My Device folder within the MediaShair app may be viewed at any time, without requiring connection to the MediaShair Hub. The stored content may only be viewed or accessed within the MediaShair app.
54 Select a folder and then select a file to upload. A blue check mark indicates the files d. selected. Tap the file again to unselect it and the blue check mark will disappear. Tap the Upload button and select the destination from the liste d options.
55 You can also create a folder where the files will be saved. After selecting a f. destinations, tap Create Folder. Enter a name for the new folder and tap Done. After a destination is chosen, tap Confirm and the upload will begin. g. A status screen will appear showing the progress of the transfer.
56 Make sure the MediaShair- XXXX Wi-Fi network is connected. b. Tap MediaShair then tap Manage. c. Select a folder and then select a file to delete. A blue check mark indicates the files d. selected. Tap the file again to unselect it and the blue check mark will disappear.
57 Tap the Done button to exit Manage Mode. f. Deleting Files from My Device: 2. Tap My Device then tap Manage. a..
58 Select a folder, then select the file to delete. A bl ue check mark will indicate the file b. is selected. Tap the file again to unselect it and the blue check mark will di sappear. Tap the Delete button and a warning message will appear asking Are you sure you c.
59 Tap the Done button to exit Manage Mode. d. Transferred Conte nt (Android ® De vices) Checking File Transfer Status: 1. To check the history of downloaded or uploaded files between the MediaShair and a. your device, tap the More button , then tap Transfer.
60 Make sure the MediaShair Hub is powered on and your device is connecte d the a. MediaShair-XXXX network. Connect an Ethernet cable from the modem to the RJ-45 Ethernet connector on the b. MediaShair Hub. From the App Home Screen, tap Settings. c. Select Internet Settings to bring up the option for Wired Access (default) o r d.
61 Configure the wired connection by tapping IP Settings e. IP Settings: 2. Option 1: DHCP (Default) a. This option is used when your router automatically configures devices that are connected directly to it.
62 Option 2: Static IP b. i. Tap the Static IP button. ii. Please fill in IP Address, Subnet Mask, Gateway, and Primary DNS, and Secondary DNS fields and tap Set. iii. The MediaShair Hub will need to reboot to apply the changes. Tap OK to confirm, then reconnect to the MediaShair-XXXX network when finished.
63 Wireless Inter net Connection (An droid ® Devices) Wireless Connection Setup: 1. Make sure the MediaShair Hub is powered on and your device is connecte d the a. MediaShair-XXXX network. From the App Home Screen, tap Settings. b. Select Internet Access to bring up the option for Wired Access (default) or Wireless c.
64 Under Configure your Wi-Fi connection, select a wireless network and en ter the d. password (pre-shared network key). Tap Join to connect. Wireless Security Settings – Device Name: 2.
65 Enter the new name into the SSID box then tap the Set but ton. b. Wireless Security Settings – Security Options: 3. To change the security mode and/or pre-shared network key: a.
66 ii. To change the Security Mode, select the desir ed security mode from the list then tap the Set button or go to step 3 to change the security ke y. iii. To change the pre-shared security key, enter the new key into the box the n tap the Set button.
67.
68 MediaShair Hub S etup (PC/Lap top) MediaShair Power Up: 1. Press and hold the power button for 5 seconds to turn on th e MediaShair Hub. o The green power indicator LED will turn on. o The blue Wi-Fi indicator LED will begin flashing and then turn solid when the Wi-Fi network is live.
69 Open an Internet brows er window and enter 10.10.10.254 into the address bar. e. Enter the Default Username and Password: f. Default Username: admin g.
70 The home page provides access to different options for viewing content, User settings, Network Settings, System Settings, or use the Wizard for a step by step walkthrough setup. Viewing MediaS hair Hub C ontent (PC/Lapto p) Accessing and Viewing Content: 1.
71 Select a file to view or playback by clicking on it, and then click the Open button. g. The selected content will open in a new browser tab or window for viewing.
72 Media Controls: 2. Control functions are limited to those built into the computer’s br owser. File Management: D ownload, Upload, C opy, Delete, and More (PC/Laptop) Notes on Content: 1.
73 Click Browse and select the file to upload from your computer to the MediaShair b. Hub and click OK. Please Note: Files larger than 2GB cannot be uploaded to the MediaShair Hub.
74 Once completed, the file uploaded will appear in the destina tion folder selected. d. Creating a New Folder: 5. Create – Click the Create button to create a new folder in the curren t directory. Copying Files to/from Connected Storage Devices: 6.
75 Moving Files Between Connected Storage Devices: 7. Select a file to move. a. Click the Move Button then select a destination folder. b..
76 The transfer appears on the status screen, and an alert provides conformation c. when the file transfer is complete. Click OK to exit. Click open to access any file selected. d. Deleting Files: 8. Select the file to delete. a. Click the delete button.
77 A second confirmation window will appear, click OK to delete the file or cancel to c. exit. Renaming Files: 9. Select the file to rename a. Click the Rename button.
78 Wired Internet C onnection (PC/La ptop) MediaShair Hub Connection: 1. Connect an Ethernet cable from the modem to the RJ-45 Ethernet connector on the a. MediaShair Hub. Press and hold the power button for 5 seconds to turn on th e MediaShair Hub. b.
79 On the welcome screen, click Next t o begin the g uided Wizard setup . d. On the Setup Wizard screen click Wired Access. The Dynamic IP option is e. preselected, so click Next to continue. Note: For easier setup, the MediaShair Hub default configuration is set to Wired Internet and Dynamic IP.
80 After clicking Next, you can continue the easy s etup by clicking Skip on the pages for f. Wi-Fi & LAN Settings and User Setting to keep the default setti ngs. The MediaShair Hub will reboot after changing se ttings or skipping the last page. g.
81 Wired Internet C onnection - Adva nced Settings (PC/Laptop ) Network Options: 1. Follow the instructions for setting up a Wired Internet Connection. a. On the MediaShair Home page, click on Network, then select from the available b. options: Host Name: 2.
82 Wi-Fi & LAN: 3. SSID – To change the name of the network created by the MediaShair Hu b, type in a name or combination of letters, numbers, and/or symbols.
83 The MediaShair Hub will need to reboot to apply any changes made. Hit the Save button and reconnect to the MediaShair-XXXX network once it has finished. DHCP Server: 4. DHCP Server – Enabling this feature allows the MediaShair Hub to distribute independent IP Addresses for each wireless device that connects to its netw ork.
84 Client List – Click this to display all the devices, and the IP Addresses assoc iated with them, currently connected to the MediaShair Hub. If DHCP Server is ENABLED: o Start Address – This is the IP Address that will be assigned to the FIRST device that connects to the MediaShair Hub network.
85 DDNS: 6. Allows setting a Dynamic Domain Name Server associated via a 3 rd Party Service. Wireless Inter net Connection (PC/ Laptop) Wireless connection setup: 1. Press and hold the power button for 5 seconds to turn on the MediaShair Hub. a. Wait for the blue Wi-Fi indicator to turn on solid.
86 On the Setup Wizard screen click Wireless Access. f. Use the drop down button in the SSID box to cho ose a wireless network. If the g. desired network is not available as an option, click the Scan button to loca te the network. After selecting a network, enter the pre-shared network key into the Password box h.
87 The MediaShair Hub will reboot after changing se ttings or skipping the last page. j..
88 After the MediaShair Hub reboots, make sure you are connected to the MediaShair- k. XXXX Wi-Fi network (you will have to reconnect if your com puter is set to automatically connect to other networks) Re-enter the Username and Password. l. You can now access the Internet by opening a brow ser window, or a ccess your m.
89 Wi-Fi & LAN: 3. SSID – To change the name of the network created by the MediaShair Hub, type in a name or combination of letters, numbers, and/or symbols.
90 DHCP Server: 4. DHCP Server – Enabling this feature allows the MediaShair Hub to distribute independent IP Addresses for each wireless device that connects to its network. Disabling this feature causes the wireless devices to share a single IP Address.
91 o Primary DNS – DNS address assigned by the network. o Second DNS – Secondary DNS address provided by the network. Internet: 5. Wired Access – Select for wireless connection to an existing wireless ne twork. Wireless Access – Select for hardwire connection to a router or modem.
92 MediaShair Hub Home Page ( PC/Laptop) User Manager: 1. a. Make sure the MediaShair Hub is powered up, the PC is connected to the MediaShair-XXXX network, and the browser is logged in to the Home Page as shown in the section entitled: MediaShair Hub Setup (PC/Laptop).
93 To apply the changes, close the browser window and reopen a brow ser window and f. enter 10.10.10.254 into the address bar. Default Username: admin New Password: (User Selected) Successfully logging in will bring you to the Me diaShair Home screen.
94 Displays information about the attached USB Drive and/or inserted S D Card. To safely remove the USB Drive or inserted SD Card while connected to the PC, select the drive and click Remove. Click OK on the warning box to proceed or Cancel to return to the previous screen.
95 Use to enable or disable Samba Service. System Settings: 4. Click the System icon . a..
96 Click Time Settings to change the System time settings as needed. b. Time Zone – Change the time zone to match the time zone where you live. Auto Sync – Enable this feature to have the time synced with an internet time server. Time Sync Frequency – Select the rate at which your MediaShair Hub pings the Internet Time Server.
97 Click Save to download a backup of the current settings of the MediaShair Hub. The file will have a .bin.gz file ex tension. Restore System Settings from Backup – To restore the MediaShair Hub to a previous settings state: Insert a USB Storage Drive containing a previous backup file into the MediaShair Hub.
98 c. Once restored you will be prompted to log in with the username and password. Click Firmware Upgrade to change the settings as needed. d. i. To upgrade the firmware for the MediaShair Hub: ii. Download the latest firmware from www.iogear.com . iii.
99 vi. Click Save to start the firmware upgrade process. The MediaShair Hub will need 5 minutes to complete the process. vii. Once finished you will be prompted to log i n with the username and password. Click Reset Settings to restore the MediaShair Hub to factory default se ttings : e.
100 iii. A warning message will ask if you want to continue, Click OK. iv. A second warning message will appear. Click Cancel to go back or OK to continue with the factory restore.
101 v. The MediaShair Hub will need 3 minutes to complete the process. vi. The MediaShair Hub is reset to the origi nal factory settings..
102 Federal Communication s Commission (FCC) S tatement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting.
103.
デバイスIOGear GWFRSDUの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
IOGear GWFRSDUをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIOGear GWFRSDUの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。IOGear GWFRSDUの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。IOGear GWFRSDUで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
IOGear GWFRSDUを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIOGear GWFRSDUの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、IOGear GWFRSDUに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIOGear GWFRSDUデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。