JacuzziメーカーJ - 400の使用説明書/サービス説明書
ページ先へ移動 of 104
OWNER’S MANUAL J-400 ™ Series J - 460 J - 465 J - 470 J - 480 2530-442W Rev . D.
Attention New Spa Owner! Congratulations on the purchase of your new Jacuzzi® spa! The following is a list of automated functions performed by your spa.
J-400 Series © 2010 by Jacuzzi Hot T ubs, Inc. All Rights Reserved T able of Contents 1.0 Important Spa Owner Information .......................................................... 1 2.0 FCC Notice ....................................................
J-400 Series 1 1.0 Operating Instructions .......................................................................... 50 1 1.1 J-1000™ Control Panel ........................................................................... 5 0 1 1.2 Activate Jets Pump .
J-400 Series 19.0 Optional Jacuzzi J-1000™ Audio System Stereo System Features .. 80 19.1 J-1000 Audio System Sound System Controls ........................................ 8 0 19.2 J-1000 Audio System Sound System Operation ........................
1.0 Important Spa Owner Information Y our Jacuzzi ® spa is constructed to the highest standards and is capable of providing many years of trouble-free use.
Page 1 J-400 Series 1.0 Important Spa Owner Information Y our Jacuzzi ® spa is constructed to the highest standards and is capable of providing many years of trouble-free use.
Page 2 J-400 Series 3.0 Important Safety Instructions for all Spa Owners READ AND FOLLOW ALL INSTRUCTIONS CAREFULL Y! This spa was manufactured to meet the standards and specications outlined in the “Virginia Graeme Baker Pool and Spa Safety Act” (VGB Safety Act).
Page 3 J-400 Series on t he gr ou nd in g lu g, i ns i de t he e qu ip me nt c o mp ar tm en t on t he equipment box. A grounding wire connector is provided on this unit to connect a • mi ni mu m N o.
Page 4 J-400 Series 6. ! W ARNING: RISK OF SEVERE INJUR Y OR DEA TH! Since excessive water temperatures have a high potential for causing • fet al d amag e d urin g th e ea rly mon ths of p regn ancy , i f pr egna nt o r pos sibl y pr egn ant, con sult you r p hysi cian bef ore usi ng a spa .
Page 5 J-400 Series 9. CAUTION: TO DECREASE RISK OF PRODUCT DAMAGE. Maintain water chemistry in accordance with manufacturer ’s • instructions. Proper chemical maintenance of spa water is necessary to maintain • safe water and prevent possible damage to spa components.
Page 6 J-400 Series 3.1 Entrapment Risk The Consumer Products Safety Commission/USA has reported that users of pools and spas have become entrapped (stuck) to drain and/or suction ttings causing death, drowning, or serious injury (see diagram below).
Page 7 J-400 Series 3. ! DANGER: RISK OF SEVERE INJUR Y OR DROWNING! May occur when part of the torso becomes entrapped, inserted or sucked into a suction or outlet opening.
Page 8 J-400 Series 3.3 Important CSA safety instructions (Canada only) When using this electrical equipment, basic safety precautions should always be followed, including the following: 1.
Page 9 J-400 Series W ARNING: .
Page 10 J-400 Series 4.2 Indoor Location For indoor installations many factors need to be considered before installing a spa indoors. Proper Foundation: Consult a Structural Engineer when considering a foundation that will adequately support the spa the entire time it is in place.
Page 1 1 J-400 Series 5.0 General Electrical Safety Instructions Y ou r new Jacuzzi® spa is equipped with the J-1000™ system. It contains the most advanced safety and self- protective equipment in the industry . Nonetheless, this spa must be installed properly to ensure dependable usage.
Page 12 J-400 Series 4. The electrical supply for this product must include a suitably rated switch or circuit breaker to open all ungrounded supply conductors to comply with Section 422-20 of the National Electrical Code/USA, ANSI/NFP A 70. The disconnecting means must be readily accessible to the spa’s occupant but installed at least 5 feet (1.
Page 13 J-400 Series L2 L1 1. Main T erminal Block 2.
Page 14 J-400 Series Figure D L2 L1 L1 L2 1. Main T erminal Block 2.
Page 15 J-400 Series Figure F 1. Obtain a at head screwdriver . 2. Place it ush against the middle slot of the terminal block (diagram 1). Figure G 1. Firmly press inward and upward on screwdriver blade, then pivot upward to open underlying wire clamp.
Page 16 J-400 Series 7.0 Power Requirements Jacuzzi ® spas are designed to provide optimum performance and exibility of use when connected to their maximum electrical service.
Page 17 J-400 Series 8.0 Spa Fill Up Procedure For best results, read each step in its entirety before proceeding with this procedure. 1. Prepare The Spa For Filling Clear all debris from • the spa. (Although the spa shell has been polished at the factory , you may want to treat it with a specially formulated spa cleaner .
Page 18 J-400 Series 5. Add Start-Up Chemicals Add the spa water chemicals as recommended by your authorized Jacuzzi spa dealer . See Section titled “Water Quality Maintenan ce” (page 71 ) for general guidance. W ARNING: RISK OF POISONING OR DEA TH.
Page 19 J-400 Series 8. Place Cover On Spa Keeping the insulating cover in place anytime the spa is not in • use will reduce the time required for heating, thereby minimizing operating costs. The time required for initial heat-up will vary depending on the • starting water temperature.
Page 20 J-400 Series W ARNING: RISK OF PERSONAL INJUR Y! T o decrease the risk of injury , drowning or entrapment, • never leave your hot tub unattended for any reason while the cover is open and ac.
Page 21 J-400 Series W ARNING: RISK OF PERSONAL INJUR Y . T o decrease the risk of injury , entrapment or drowning, • never leave your hot tub unattended for any reason while the cover is open and accessible to small children and animals! T o decrease the possibility of contracting a waterborne • ill- ness (e.
Page 22 J-400 Series 9.0 Spa Features 9.1 J-480 Spa Features 98 F 1 2 3 4 5 9 10 11 7 3 4 5 12 13 8 5 5 4 4 3 7 6 6 6 6 14 15 18 16 23 3 21 24 20 20 20 20 17 17 17 19 19 22 25 17 J-1000™ Control Panel 1. W aterfall Control V alve 2. Air Control V alves (4 ea.
Page 23 J-400 Series 9.2 J-480 Massage/W aterfall Selector Diagram 98 1a 1a 1b 2b 2b 2a 2a 2a 1 3 3 5 5 5 2 4 4 Massage Selectors (1-2) • Massageselector1divertsoutputbetweenjetsgroups1a-1b. • Massageselector2divertsoutputbetweenjetgroups2a-2b.
Page 24 J-400 Series 9.3 J-480 Air Controls Diagram 98 F 1 1 2 2 2 2 3 4 4 4 4 4 3 1 2 3 4 Air Controls Operation • Rotateaircontrols1-4toaddairtodesignatedjetgroups. • CenterfootwellIXJetdrawsairatalltimeswhenjetspumpis running.
Page 25 J-400 Series 9.4 J-470 Spa Features 1 98 F 2 3 4 5 9 10 11 7 3 4 5 12 13 8 5 5 4 26 4 7 6 6 6 6 14 15 18 16 23 3 21 24 20 20 20 20 17 17 17 19 22 3 25 17 J-1000™ Control Panel 1. W aterfall Control V alve 2. Air Control V alves (4 ea.) Introduce Air 3.
Page 26 J-400 Series 9.5 J-470 Massage/W aterfall Selector Diagram 98 F 1a 1b 2b 2b 2a 2a 1 3 3 5 5 5 2 4 4 Massage Selectors (1-2) • Massageselector1divertsoutputbetweenjetsgroups1a-1b. • Massageselector2divertsoutputbetweenjetgroups2a-2b.
Page 27 J-400 Series 9.6 J-470 Air Controls Diagram 98 F 1 2 3 4 4 3 1 2 3 1 1 4 1 Air Controls Operation • Rotateaircontrols1-4toaddairtodesignatedjetgroups. • CenterfootwellIXJetdrawsairatalltimeswhenjetspumpis running.
Page 28 J-400 Series 9.7 J-465 Spa Features 98 F 2 4 9 10 11 3 4 5 13 8 5 5 5 4 4 7 6 6 6 15 16 17 20 19 17 17 1 3 22 21 12 12 12 18 14 14 14 3 13 23 12 J-1000™ Control Panel 1. W aterfall Control V alve 2. Air Control V alves (3 ea.) Introduce Air 3.
Page 29 J-400 Series 9.8 J-465 Massage/W aterfall Selector Diagram Massage Selectors (1) • Massageselector1divertsoutputbetweenjetsgroups1a-1b. Mass Aspiration Jet Flow Control V alve (2) • V alve2controlsoutputtofootwellIXJet.
Page 30 J-400 Series 9.9 J-465 Air Controls Diagram 98 F 1 1 2 2 2 2 2 3 3 3 1 3 2 Air Controls Operation • Rotateaircontrols1-3toaddairtodesignatedjetgroups. • CenterfootwellIXJetdrawsairatalltimeswhenjetspumpis running.
Page 31 J-400 Series 9.10 J-460 Spa Features 98 3 3 7 4 4 3 4 5 5 20 8 14 10 16 12 1 1 9 10 16 14 15 18 17 6 6 5 2 19 5 9 13 3 4 9 9 10 16 13 9 9 14 16 21 1 J-1000™ Control Panel 1. W aterfall Control V alve 2. Air Control V alves (4 ea.) Introduce Air 3.
Page 32 J-400 Series 9.1 1 J-460 Massage/W aterfall Selector Diagram 98 1 4 4 1 a 4 4 4 3 3 2 2 Massage Selector (1) • Massageselector1divertsoutputbetweenjetsgroups1a-1b. Mass Aspiration Jet Flow Control V alve (2) • V alve2controlsoutputtofootwellIXJet.
Page 33 J-400 Series 9.12 J-460 Air Controls Diagram 98 4 4 3 3 5 3 3 1 1 2 2 2 4 Air Controls Operation • Rotateaircontrols1-4toaddairtodesignatedjetgroups. • CenterfootwellIXJet(5)drawsairatalltimeswhenjetspumpis running.
Page 34 J-400 Series 10.0 Control Panel Main Menu 10.1 Control Panel Y our Jacuzzi Spa is equipped with a state-of-the-art control panel. Y ou will be able to access sets of multi-level menus. Familiarize yourself with the following information, so you can gain the full benets of your spa.
Page 35 J-400 Series 10.2 Main Menu Features From the Main Menu you can access the main component menus to operate your Jacuzzi Spa. Listed below is a list of the Main Menu icons.
Page 36 J-400 Series = Press this button to access the corresponding menu located to the left side of it. = Entertainment Menu Icon: Press button A to access the menu to operate the J-1000™ Audio System powered by JBL (page 38 ).
Page 37 J-400 Series 10.3 Menu Flowchart The owchart below is included to help you understand the spa’s navigational screens. By pressing the buttons located next to each corner icon, you will enter additional menus and submenus. Each menu is covered in detail in the sections to follow .
Page 38 J-400 Series 10.4 Entertainment Menu Display Jacuzzi models equipped with the optional J-1000 Audio System pow - ered by JBL, offer an enhanced spa experience.
Page 39 J-400 Series = Radio/CD Menu icon: Press button C to access the radio or CD device submenus (page 4 5 ). Note: When you enter the submenu, the system will default to the last device that was used. If the Radio was used, it will also default to the last broadcast band used (AM/FM).
Page 40 J-400 Series 10.5 iPod®/AUX Submenu While in the Entertainment menu, press button A to access the for iPod/ AUX submenu. Y ou can scroll through the tracks, control the volume, and pause/play the device, for the iPod device only .
Page 41 J-400 Series Press this button to access the Radio/CD submenus (page 4 5 ) . Note: The Radio/CD submenu will always default to the last device used. If the radio was used, it will also default to the last broadcast band used (AM/FM).
Page 42 J-400 Series Press this button to access the Radio/CD submenus (page 4 5 ). Note: The Radio/CD submenu will always default to the last device used. If Radio was used, it will also default to the last broadcast band used (AM/FM).
Page 43 J-400 Series D C B A iPod V ol. Pr ess to pla y or pause US B AUX “Displa ys Audio Information” NAND = Audio information: Displays the track number , artist, song, and time elapsed (if available). The arrows on either side indicate that the Navigational Quad Keypad can be used to scroll through the tracks.
Page 44 J-400 Series 10.8 NAND Submenu The NAND (internal memory) submenu lets you access les copied onto the hardware. Y ou can control the folder selection, track selection, vol - ume, and pause/play of the device. Note: The USB/NAND submenu will always default to the last device used.
Page 45 J-400 Series 10.9 FM Radio Submenu The FM radio sub menu gives you access to your preset stations and local FM radio stations. A. Listening to Preset stations B D C A V ol. F M 1 06.7 Pr ess for radio tuning mode P RESE T 1 iPod A UX NAN D = Preset number: Indicates which preset station is currently playing.
Page 46 J-400 Series B. Listening to local FM radio stations D C B A V ol. F M 5 9 7 .7 Pr ess for AM PRESETS R AD IO = Station number: Indicates the station that is currently playing. The arrows on the either side of the station number indicate that the Navigational Quad Keypad can be used to scroll through the local stations.
Page 47 J-400 Series 10.10 AM Radio Submenu The AM r adio submenu gives you access to your preset stations and local AM radio stations. A. Listening to Preset stations D C B A V ol. A M 980 Pr ess for radio tuning mode P RESE T 1 iPod A UX NAN D = Preset number: Indicates which preset station is currently playing.
Page 48 J-400 Series B. Listening to local AM radio stations D C B A V ol. A M 980 Pr ess for FM PRESETS R AD IO = Station number: Indicates the station that is currently playing. The arrows on the either side of the station number indicate that the Navigational Quad Keypad can be used to scroll through the local stations.
Page 49 J-400 Series 10.1 1 CD Submenu The CD submenu gives you access select a track, adjust the volume level and pause or play . D C B A iPod V ol. A UX Pr ess to pla y or pause C D P LA YE R “Displa ys Audio Information” NAN D = Audio Information: Displays the track number , artist, song, and time elapsed (if available).
Page 50 J-400 Series 1 1.0 Operating Instructions 1 1.1 J-1000™ Control Panel Y our Jacuzzi spa is equipped with a J-1000™ control panel, massage selectors, and air control knobs located on the top rim of the spa (pages 22 -33 ). These controls let you operate many of the special functions of your Jacuzzi spa.
Page 51 J-400 Series 1 1.3 Activate Lights From th e Main Menu (page 35 ), press button C to enter the Lighting submenus. The LCD screen will display the Lighting icons (Figure B). From this menu you can control the interior lighting (waterfall, footwell, IX logo, pillows and cup holder lights).
Page 52 J-400 Series A. T o access the Interior Solid Color Mode: 1. Press button A to activate the solid color mode. Note: The default color and intensity will always be the last color and intensity used.
Page 53 J-400 Series 3. T o increase or decrease light intensity , use the Navigational Quad Keypad as follows: Press the Up button to increase the intensity in 25% increments. • Pres • s the Down button to decrease the intensity in 25% increments .
Page 54 J-400 Series 1 1.8 W aterColour™ W aterfall Control T urn waterfall control valve (pages 22 -33 ) counterclockwise to increase waterfall output. T urn control valve clockwise to decrease or turn off waterfalls. 1 1.9 Air Controls Certain jet systems have their own air control.
Page 55 J-400 Series 12.0 Programming Instructions for Settings 1 Menus Y our Jacuzzi spa is equipped with two settings menus that allow you to program and activate different components of the spa. In the “Settings 1” menu you can program the Language, Date and T ime, and the check/ clean lter reminder .
Page 56 J-400 Series 12.3 Setting the Check Filter Reminder 1. Use the Navigational Quad Keypad to scroll from Language to Filter by using the Down button. After “Filter” selection is active, press the Splash button to access the “set lter timer” (Figure C).
Page 57 J-400 Series 4. With the “Set Month” highlighted (Figure G), use the Left or Right button n the Quad keypad to scroll through selection. Once the correct month is displayed, press the Down button to enable the day selection.
Page 58 J-400 Series 4. With “Set Min.” highlighted (Figure L), press the Left (decrease) or Right (increase) button on the Quad keypad to scroll through the selection. Once the correct minutes are displayed, press the Splash button to save your changes.
Page 59 J-400 Series 13.0 Programming Instructions for Settings 2 Menus The “Settings 2” screen allows you to program Heating, Primary Filter and Secondary Filter modes. 13.1 Programming Heating Cycles Y our Jacuzzi spa is equipped with two modes of heating.
Page 60 J-400 Series 13.2 Auto-Heating Mode Auto-Heating mode is typically selected by customers in cold climates where heat up times are extended due to lower ambient temperatures. In this mode, water temperature is regulated by the set temperature which activates the heater automatically as needed.
Page 61 J-400 Series 2. F rom this menu (Figure D), you can set the days, times, and duration. With “Day Settings” highlighted press the Splash button on the Quad Keypad to conrm select ion. 3. When you enter the submenu (Figure E), you can choose the day(s) you would like “Program A” to run for a heating cycle.
Page 62 J-400 Series 8. Press the Splash button on the Quad keypad to save your changes and return to the Heating Menu. At this point you can program a Secondary Heating Mode (Program B) or to continue on to the Filtering programming (see Section 13.5, page 64).
Page 63 J-400 Series 6. Once back to the “Program B” Main Menu, press the Down button on the Quad keypad to highlight “Start T ime” (Figure K). Press the Left or Right button on the Quad Keypad to select the time you wish the spa to run. Press the Down button on keypad to save setting.
Page 64 J-400 Series 13.5 Programming the Primary Filter Cycle 1. T o program the Primary Filter cycle press button A (Figure A). This cycle is mainly used to alter the pre- programmed 12-hour running period of the circulation pump. The 12-hour cycle is from 12:00 AM to 12:00 PM.
Page 65 J-400 Series 13.6 Programming the Secondary Filter Cycle 1. T o program the Secondary Filter cycle, press button C. This cycle will activate the main jet pump to run for additional ltration when programmed. If you choose not to use this feature, please skip this section.
Page 66 J-400 Series 7. Now you will need to adjust the lter cycle “Duration” (Figure H). The duration range is from 0 (OFF) to 120 minutes. Press the Left or Right button on the Quad Keypad to make your adjustments in increments of 15 minutes.
Page 67 J-400 Series 14.1 Cleaning the Filter Cartridges A programmable “Please Check Filter” reminder appears on the control panel display after a specied number days to remind you to clean the skimmer lter and to check the polishing bag lter .
Page 68 J-400 Series or install a new bag every three months.) Located below the bag is a small Proclear lter . Remove the lter by rotating it counterclockwise. For cleaning procedures see step 6 below . Once the lter has been cleaned or replaced, reinstall it into the skimmer below the polishing bag.
Page 69 J-400 Series T o drain your spa, perform the following steps: 1. T urn off power to spa at breaker . 2. Locate the drain valve located on the front left corner on the black plastic pan. Hold the larger (rear) drain valve body to prevent it from turning, then loosen and remove the front cap to expose the underlying male hose threads.
Page 70 J-400 Series CAUTION: Never spray cabinet with a high pressure garden hose for any reason since this action may induce an electrical short in the spa’s electrical equipment.
Page 71 J-400 Series 6. Remove the equipment-side cabinet panels and locate the drain plugs in the front of each pump (Figure A, page 1 2). Remove these plugs to allow the water to drain out of the pumps and heater . Note: Approximately one to two gallons will be released during this procedure.
Page 72 J-400 Series CAUTION: Never store hot tub chemicals inside the hot tub’s equipment bay . The equipment bay may reach elevated tempera- tures, this is where high voltage electronic devices are located. This area is not intended for storage of any kind.
Page 73 J-400 Series 15.4 Ozone W ater Maintenance System (Optional) This system is optional on North American models and standard equipment on export 50 Hz modes. If you spa is equipped with the Jacuzzi CD ozone water purication system you will nd that your water stays fresh and clear with signicantly less chemical usage.
Page 74 J-400 Series 3. Communication error: Communication between the control panel and circuit board is faulty . If condition persists, contact your authorized dealer or service organization. 4. Pump does not operate: (Heater is deactivated. The lter/circulation may also be deactivated).
Page 75 J-400 Series 10. Shorted sensor: The hi-limit temperature sensor is not functional. Heater is disabled. This must be repaired only by a qualied authorized service organization or service technician. 1 1. Start-up malfunction: Flow switch is non-functional.
Page 76 J-400 Series 17. Please Check Filter! This message will appear when the lter reminder time has expired (see Figure B). Please remove the Proclear lters and lter bag for cleaning or replacement.
Page 77 J-400 Series 17.0 T roubleshooting Procedures In the unlikely event your spa is not working the way you believe it should, please rst review all the installation and operating instructions .
Page 78 J-400 Series POOR JET ACTION (see pages 22 -33 ) 1. Make certain the jets pump is turned on. 2. Check position of massage selectors. 3. Open air control for selected jet system. 4. Check for adequate water level. 5. Check for dirty lter (page 6 7 ).
Page 79 J-400 Series Red (L2) Pigtail Neutral Bus Ground Black (L1) Green Main Service Panel with GFCI 2-Pole GFCI Breaker Ground/Bonding Lug** 2-Pole Circuit Breaker with 2-Wire Grounded Load Connect.
Page 80 J-400 Series 19.0 Optional Jacuzzi J-1000™ Audio System Stereo System Features 19.1 J-1000 Audio System Sound System Controls 1 2 17 3 9 8 7 5 4 6 10 11 13 15 12 16 14 18 1. Power On/Off Button 2. T une/Seek Up/Down Button 3. V olume Up/Down Button 4.
Page 81 J-400 Series 19.2 J-1000 Audio System Sound System Operation 1. Power On and Off Press power button (1) once to turn on stereo system. Press a sec - ond time to turn off. 2. Adjusting V olume Press VOL Up/Down button (3) to increase or decrease volume.
Page 82 J-400 Series 8. Adjusting Fader Level Press EQ button (5) repeatedly until display reads “F ADER.” Press VOL Up/ Down button (3) to choose desired set - ting. A display of “F ADER F-R” indicates center , R01 to 15 indicates rear fade, F01 to 15 indicates front fade.
Page 83 J-400 Series 12. Open/Close Front Panel Press rmly on the release button (15), then open front panel (16) by gently lifting upward on bottom edge. T o close front panel, gently ip panel down, then press rmly on panel directly above release button (15) until you hear an audible “click”.
Page 84 J-400 Series 5. Accessing Preset Stations Press and hold ENT/SH button (9) until display reads “SHIFT”. Repeatedly press TUN up or down button (2) to choose preset 1-6, then press ENT/SH button (9) to conrm selection. 19.4 J-1000 Audio System CD Player Operation 1.
Page 85 J-400 Series 4. Searching File or Folder in MP3/WMA CD T o Search File in CDP (MP3/WMA) mode: Press AS/PS button (6) to • enter track searching mode. Then press the VOL up/down button (3) to scroll through available tracks. At desired track, press ENT button (9) to conrm selection.
Page 86 J-400 Series • If ONE COPY is selected: The record percent “DOWN LOAD xx%” will display on the LCD (17). After copying is nished, the next track will automatically begin playback. If ALL COPY is selected: “The number • of total track --> the number of recorded track” will display on LCD (17).
Page 87 J-400 Series 1.) The current track and play time or 2.) It will revert to the rst folder and rst song * . Please note after a few seconds the stereo display will show audio information from iPod.
Page 88 J-400 Series 5. Notes for iPod mode In iPod Mode, the play/pause function works. • In iPod Mode, the RDM function does not work. • In iPod Mode, press RPT button only can play the current track • repeatedly .
Page 89 J-400 Series 19.8 Generic MP3 Player Operation 1. Connecting Y our MP3 Player A. Plug in any MP3 player ’s headphone output jack with supplied cable into the auxiliary port (1 1) using the supplied audio RCA cable. Close stereo compartment during use to prevent moisture from entering the compartment.
Page 90 J-400 Series 2. Fogged CDs and Lens This condition may occur when it’s cold. Wipe fogged CDs with a soft cloth. Fogged optical components inside the unit will return to normal operation after an hour in a heated environment. 19.10 J-1000 Audio System Stereo Specifications T uner FM usable sensitivity .
Page 91 J-400 Series 19.1 1 J-1000 Wireless Remote A. The J-1000 Remote Y our spa is equipped with a technologically advance wireless remote (Figure A). Most spa functions can be controlled with the remote. The sleek modern design and easy navigation make this remote a great addition to your spa enjoy- ment.
Page 92 J-400 Series 2 = Show 2 icon: Feature not available. 1 = Jet 1 icon: Allows you to turn on/off the jets pump 1. 2 = Jet 2 icon: Allows you to turn on/off the jets pump 2. Noties you when the batteries are low and might need to be replaced.
Page 93 J-400 Series 1. When you rst use the remote, it will need to be bonded to the spa for opera- tional use. T o bond the remote: Pr es s b ut to n D an d th e Do w n bu tt on , • at t he sa me t im e, f or 2 s e co nd s (s ee page 3 4 ).
Page 94 J-400 Series Increase the temperature by pressing the Up button. • Decrease the temperature by pressing the Down button. • Use ºC reading by pressing the Left button. • Use ºF reading by pressing the Right button. • Go to the Main Menu by pressing the Return button or not pressing • any keys for 4 seconds.
Page 95 J-400 Series 9. Lock Reminder If you press any key to activate the remote and the lock icon is the only thing showing, then the spa has been locked.
Page 96 J-400 Series 3. CD Operation Y ou can scan through the track numbers and adjust the volume with the remote. When you are in the CD mode the screen will appear like Figure D; then it will change to the track duration screen for the track. Using the Navigational Quad Keypad you can: Increase the volume by pressing the Up button.
Page 97 J-400 Series 6. NAND Folder Operation T o a cc e ss t he N AN D me nu , s el ec t th e US B fe at u re a nd then press the Up button. Y ou can scan through the fold - er s, t r ac k nu mb er s an d ad j us t th e vo lu me w it h t he r em ot e.
Page 98 J-400 Series W ARNING: RISK OF ELECTRICAL SHOCK HAZARD EXISTS AND EQUIPMENT DAMAGE! Never install or remove iPod while hands are wet or while sitting partially immersed or fully immersed in spa! 9.
デバイスJacuzzi J - 400の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Jacuzzi J - 400をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJacuzzi J - 400の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jacuzzi J - 400の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jacuzzi J - 400で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jacuzzi J - 400を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJacuzzi J - 400の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jacuzzi J - 400に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJacuzzi J - 400デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。