JVCメーカーAV-25VT11の使用説明書/サービス説明書
ページ先へ移動 of 24
GGT0018-001A-H 0503-NIC-JMT © 2003 VICTOR COMP ANY OF JAP AN, LIMITED COLOR TELEVISION INSTRUCTIONS Thank you for buying this JVC color television. To make sure you understand how to use your new TV , please read this manual thoroughly before you begin.
2 Safety pr ecautions W ARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION T O ENSURE PERSONAL SAFETY , OBSER VE THE FOLLO WING RULES REG ARDING THE USE OF THIS TV . • Operate only from the po w er source specified on the TV .
3 Prepar ation 1 Confirm which remote control you have Y our TV comes with one of the two remote contr ols shown belo w . Functions y ou can operate differ depending on the type of r emote control.
4 Prepar ation 3 Connecting the antenna and VCR • R ead the manuals provided with the de vices. Depending on the de vice , the connection method may be differ ent from the diagr ams. Also the device settings may need to change depending on the connection method.
5 Prepar ation 4 Connecting other devices If you ar e not connecting any other de vices, skip step 4 and perform step 5. • Use the headphones with a ster eo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speak ers go off. • The OUTPUT terminal outputs the video and sound signals which y ou are viewing on the TV .
6 Prepar ation 6 SETUP TOUR When the TV is first turned on it enter s the SETUP T OUR mode , and the JVC logo is display ed. F ollow the instructions on the on-scr een display to perform the SETUP T OUR. • In case of r esetting that the r eason for such as remo val, y ou can set the A UT O CH PRESET function on the “MENU 3” menu.
7 Basic operation • The illustr ation below is for the remote control RM-C1330 supplied with VT3 1 series models. Y our r emote control ma y not look exactly lik e the illustrations . 1 Press the POWER button to turn your TV on. • If y our TV does not turn on, press the Main pow er button on the TV then press the PO WER button again.
8 Remote contr ol buttons and functions MUTING button Y ou can turn the sound off instantly . Press this button. T o turn the sound on, press this button again. COLOR SYSTEM button If the picture is not clear or no color appears , change the current color s ystem to another color sy stem.
9 Remote control buttons and functions ECO SENSOR button Y ou can adjust this TV so that the screen automatically adjusts to the optimum contrast accor ding to the brightness of y our room. This function r educes ey e strain and the pow er consumption of this TV .
10 Remote control buttons and functions CHANNEL SCAN button Y ou can quickly view all TV channels progr ams that y ou can view on y our TV , and search for the pr ogr am you w ant to view . 1 Press this button to start scanning TV channels. The TV channel progr ams are each display ed for sev er al seconds.
11 OFF TIMER ECO SENSOR CINEMA SURROUND MENU DISPLA Y TV/VIDEO 12 3 DISPLAY button MENU t buttons MENU buttons CHANNEL –/+ buttons PICTURE MODE CHANNEL SCAN CHANNEL RETURN+ 100+ VOLUME 456 789 0 / CLOSED CAPTION COLOR SYSTEM BASS Using the TV’ s menus This TV has a number of functions you can oper ate using the menus .
12 Using the TV’ s menus INPUT Y ou can view images from VCRs or other devices connected to y our TV . 1 Press MENU T to display the “MENU 1” menu, then select “INPUT”.
13 Using the TV’ s menus CLOSED CAPTION Y ou can view closed captions or text information. 1 Press MENU T to display the “MENU 1” menu, then select “CLOSED CAPTION”. MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON SELECT BY EXIT BY OPERATE BY -+ D ISPLA Y PICTURE TILT 00 CLOSED CAPTION 2 Press CHANNEL M or MENU / .
14 Using the TV’ s menus VIDEO-2 SET Set the VIDEO-2 SET correctly accor ding to the video signal input from the e xternal device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be display ed. 1 Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”.
15 Using the TV’ s menus CHANNEL SKIP Y ou can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons or the CHANNEL SC AN button. 1 Press MENU T to display the “MENU 3” menu, then select “CHANNEL SKIP”.
16 Using the TV’ s menus Picture Adjustments Y ou can adjust the picture as you lik e . 1 Press MENU T to display the “MENU 4” menu. MENU 4 TINT COLOR BRIGHT PICTURE DETAIL SELECT BY EXIT BY OPERATE BY -+ D ISPLA Y 2 Press MENU T to select an item and press CHANNEL M or MENU / to adjust it.
17 Using the TV’ s menus F A VORITE CH SETTING Y ou can set PICTURE MODE, VNR and PICTURE EFFECT functions for the fav orite channels using F A VORITE CH SETTING menu. 1 Press MENU T to display the “MENU 6” menu, then select “F A VORITE CH SETTING”.
18 Using the TV’ s menus AI ECO SENSOR Y ou can enable this function so that the brightness of TV screen is automatically adjusted according to the brightness of y our room. 1 Press MENU T to display the “MENU 6” menu, then select “AI ECO SENSOR”.
19 Attaching the T win P ort Bass Blaster Unit < A V -2 1VT3 1/A V -25VT3 1/A V -29VT3 1 only > The T win Port Bass Blaster Unit is packaged together with the TV .
20 1 VIDEO-1 INPUT terminal 2 COMPONENT (VIDEO-2) INPUT terminal 3 OUTPUT terminal 4 Antenna socket VIDEO -1 INPUT OUTPUT COMPONENT ( VIDEO-2 ) INPUT 4 3 2 1 V MONO L / V Y / V L MONO L / C B RR R C R.
21 Basic operation Check to make sur e the CHILD LOCK function is set to “ OFF ” . When the CHILD LOCK function is set to “ ON ”, the TV cannot be operated using the fr ont contr ol buttons. F or details, see “CHILD LOCK” on page 13. 1 Press CHANNEL M to turn the TV on from standby mode.
22 Cannot turn the TV on • Pr ess the Main power button on the TV . • Connect the po w er cord to the A C outlet. The screen turns blue • Is the BLUE B A CK function on? (see page 13.) Remote control inoperable • R eplace the batteries. (see page 3.
23 Specifications TV RF systems M Color systems NTSC 3.58 (in TV mode only) NTSC 3.58, NTSC 4.43, P AL (in VIDEO mode only) Channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
GGT0018-21VT11-E5_cover 06/19/2003, 17:33pm 20.
デバイスJVC AV-25VT11の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC AV-25VT11をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC AV-25VT11の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC AV-25VT11の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC AV-25VT11で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC AV-25VT11を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC AV-25VT11の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC AV-25VT11に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC AV-25VT11デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。