JVCメーカーCA-MXJD5の使用説明書/サービス説明書
ページ先へ移動 of 59
COMPACT COMPONENT SYSTEM CA-MXJD5 INSTRUCTIONS GVT0127-005A [A] EXTENDED SUPER BASS JD5_Cover[A].fm Page 1 Wednesday, June 30, 2004 11:15 AM.
G-1 Warnings, Cautions and Others Caution–– (STANDBY/ON) button! Disconnect the mains plug to shut the power off completely. The (STANDBY/ON) button in any position does not disconnect the mains line. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.
G-2 CAUTION: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
G-3 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION : Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION : Visible and invisible laser radiation when open and interlock failed or defeated.
1 Contents Introduction ............................................................ 2 Precautions .......................................................................... 2 How to Read This Manual .................................................. 2 Getting Started .
2 Introduction Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
3 Getting Started Step 1 : Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.
4 Step 3 : Hook Up If you need more detailed information, see pages 6 and 7. TV Digital Audio Equipment OPTICAL DIGITAL IN AV COMPU LINK II AV COMPU LINK EX Turn the power off to all components before connections. Illustrations of the input/output terminals below are typical examples.
5 T CENTER CENTER SPEAKER 8 OPTICAL DIGITAL OUTPUT FRONT MAIN SPEAKER LEFT RIGHT ª FRONT SUBWOOFERS · ª · ª · ª · For better FM/AM reception Outdoor FM antenna (not supplied) AM loop antenna Keep it connected. Vinyl-covered wire (not supplied) Extend it horizontally.
6 To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna and speaker cords • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.
7 To connect a center speaker and surround speakers • Connect the center speaker to the CENTER jack. • Connect the left surround speaker to the LEFT jack. • Connect the right surround speaker to the RIGHT jack. • Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
8 Setting the Speakers Speaker layout To enjoy multi-channel sound, locate speakers as follows. If you cannot locate them like this, adjust the speaker setting by using the Set up menu. (See right column.) • You can place the front subwoofer wherever you like since bass sound is non-directional.
9 7 Select the speaker to adjust the distance, then display the pop-up window. 8 Adjust the desired speaker distance. • For each speaker (FRONT SPEAKER, CENTER SPEAKER, SURROUND SPEAKER), set the distance from the listening point within the range of 0.
10 Before Operating the System Playable Disc Types This unit has been designed to play back the following discs: In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
11 Parts Index Refer to the pages to see how to use the buttons and controls. Main unit SET UP TV VOLUME - - V O L U M E OPEN / CLOSE PRESET SOUND MODE RHYTHM AX STANDBY SUBWOOFER LEVEL PHONES TUNING .
12 About the Display Indication The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. TITLE LFE S C RS LS L R CHAP .
13 1 Surround Mode/Source signal indicators • Surround Mode indicators: light to indicate the current activated speaker. • L/C/R/LFE/LS/S/RS: light to indicate the current source signal. 2 TITLE indicator • Lights to indicate the title number when the source is DVD Video.
14 Daily Operations —Playback ¥ Turn on the power. The STANDBY lamp on the main unit goes off. • Without pressing (STANDBY/ON), the System also turns on by pressing one of the source select buttons in the next step. ø Select the source. Playback automatically starts if the selected source is ready to start playback.
15 Listening to the Radio To select the band (FM/AM) To tune in to a station While FM or AM is selected... When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops. To stop searching manually, press either button.
16 Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA/JPEG/MPEG-4 comprise of “ Groups ” which includes “ Tracks ,” and CD/ SVCD/VCD comprise of only “ Tracks .
17 T o select an item directly You can select a title/chapter/track directly and start playback. For DVD Video, you can select a title before starting playback , while you can select a chapter after starting playback .
18 Playing Back a Tape To insert a tape You can play back type I tapes. • The use of C-120 or longer tape is not recommended. To change the tape running direction (deck B only) To reverse the tape automatically (deck B only) To playback the both decks A and B continuously —Relay Play When the cassettes are set in the both decks.
19 Daily Operations —Sound&Other Adjustments Adjusting the Volume The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, VOLUME MAX). To drop the volume in a moment Reinforcing the Bass Sound To adjust the bass level gradually You can select the subwoofer level from level 0 (minimum) to level 4 (maximum).
20 Adjusting the Front Speaker Output Balance You can adjust the output balance of left front speaker and right front speaker within the range of R (right) –6 (minimum sound level from the right speaker) to L (left) –6. Selecting the Sound Modes You can select one of the preset Sound Modes.
21 Using Surround Mode To activate Surround Mode • For DVD/CD source • For AUX/FM/AM/TAPE-A/TAPE-B * If Multi-channel surround signal comes in, Multi-channel Surround Mode will be selected automatically. To adjust the DSP effect level When one of the DSP modes is selected.
22 Changing the Picture Tone While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own likeliness. To select a preset picture tone 1 Activate VFP. 2 Select a preset picture tone. To adjust the picture tone 1 Select “USER1” or “USER2.
23 Setting the Clock Without setting the built-in clock, you cannot use Daily/ Recording Timers (see page 37) and Sleep Timer (see next column). • To exit from the clock setting, press CLOCK/TIMER as required. • To go back to the previous step, press CANCEL/DEMO.
24 Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
25 Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.
26 Playing Back a Bonus Group on a DVD Audio Some DVD Audios have a special group called “bonus group” whose contents are not open to the public. • To play back a bonus group, you have to enter the specific “key number” (a kind of password) for the bonus group.
27 Advanced Disc Operations Programming the Playing Order —Program Play You can arrange the playing order of the tracks (up to 99) before you start playback. 1 Before starting playback, activate Program Play. 2 Select chapters or tracks you want for Program Play.
28 To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random—Random Play You can play the contents of all tracks at random. 1 Before starting playback, activate Random Play.
29 Playing Repeatedly • You can also select the repeat mode using the on-screen bar (see page 31). Repeat Play You can repeat playback. • For DVD Video: While playing... • For DVD Audio: While playing or before playback... • For CD/SVCD/VCD: While playing (without PBC for SVCD/VCD) or before playback.
30 On-Screen Disc Operations About the On-screen Bar You can check the information on disc (except for MP3/ WMA/JPEG/MPEG-4 disc) and use some functions through the on-screen bar. 2 / 3 / 5 / ∞ ENTER 7 ON SCREEN REPEAT ZOOM DVD/CD 3 8 2 OFF 1/3 1/3 1/3 TIME 4 TITLE 14 TOT AL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2 TIME OFF CHAP .
31 O perations Using the On-screen Bar Basic operation procedure through the on-screen bar is as follows: While a disc is selected as the source... Ex.: Selecting a subtitle (French) for DVD Video: 1 Display the on-screen bar with the pull-down menu. 2 Select (highlight) the item you want.
32 5 Finish the setting. To cancel Repeat Play, select “OFF” in step 4 . To erase the on-screen bar A-B Repeat 1 While playing, display the on-screen bar with the pull-down menu. 2 Select . 3 Display the pop-up window. 4 Select “A-B”. 5 Select the start point (A).
33 Chapter/Track Search You can search for the chapter (DVD Video) or track (DVD Audio) number to play. 1 While playing, display the on-screen bar with the pull- down menu. 2 Select or . 3 Display the pop-up window. 4 Enter the desired chapter/track number.
34 To move the highlight bar between group list and track list To select a group/track in the list To start playback • Once you start playing back a JPEG/MPEG-4 track, the CONTROL screen goes off.
35 Advanced Tape Operations Recording on a Tape You can use type I tapes for recording. • To play a tape, see page 18. 1 Insert a recordable cassette in deck B.
36 3 Start playing the source—“FM,” “AM,” “DVD/CD,” “TAPE-A” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see the right column). 4 Start recording. To stop recording Dubbing Tapes 1 Change the source to TAPE.
37 Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite song. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically. • To correct a misentry during the process, press CANCEL/ DEMO.
38 3 Turn off the System (on standby) if you have set the timer with the System turned on. To turn off the Timer after its setting is done You can turn off the timer after it has been set. • Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days.
39 Set up Menu Operations Operating Procedure You can use the Set up Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”: 1 Show the set up menu. 2 Select one of the set up menus.
40 7 Repeat steps 3 to 4 to set other items on the same Setup Menu. Repeat steps 2 to 4 to set other items on another Setup Menu. To finish the Set up Menu 7 LANGUAGE Set up Menu You can select the initial languages for disc playback. You can also select the language shown on the TV screen while operating this System.
41 PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source). Select one of the following: SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
42 7 SPK. SETTING Set up Menu You can adjust the sound settings of the System. LEVEL Select this to enter the LEVEL submenu. If the output sound of center speaker or surround speakers from the listening position are not equal to that of the front speakers, use test tone to adjust the output level to get the best possible surround effect.
43 7 OTHERS Set up Menu You can change some other convenient functions. RESUME You can activate or deactivate Resume for disc playback (see page 16). Select one of the following: ON SCREEN GUIDE You can activate or deactivate the on-screen guide icons (see page 16).
44 Restricting the Review —Parental Lock You can restrict playback of DVD Video containing violent scenes and those unsuitable for your family members. Once you have set the rating level, such violent scenes (for which a higher level than you set is assigned) may be skipped or changed to another scene (depending on how the disc is programmed).
45 To change the setting 1 Display the PARENTAL LOCK sub menu. • Follow steps 1 to 4 of “To set Parental Lock” . “PASSWORD” is automatically selected. • You cannot select any item other than “EXIT” until you enter the correct password.
46 Operating the TV Operating TV You can operate the JVC’s or other manufacturers’ TV using this remote control. 1 Keep pressed until the following steps are complete. 2 Enter the code setting mode. 3 Enter the 2-digit manufacture’s code number.
47 Additional Information Learning More about This System Before Operating the System (see pages 10 to 13) Playable Disc Types: • If you play back an NTSC disc with this setting set to “PAL,” yo.
48 Changing the Scanning Mode: • Do not change the progressive scanning mode in the following cases: – When your TV does not support the progressive video input.
49 • Everything on the disc goes onto the tape in the order on the disc, or according to the order you have made for Program Play. • You cannot use Synchronized Recording with Repeat Play (Repeat Play will be canceled). • When recording starts, “DISC REC” appears on the display and the REC (recording) lamp flashes.
50 Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again.
51 Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Ti.
52 Country/Area codes list for Parental Lock AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica .
53 NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF French Polynesia PG Papua New Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and Miquelon PN Pitcairn PR Puerto Ri.
54 Specifications Amplifier section Output Power: FRONT MAIN SPEAKERS: 40 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. FRONT SUBWOOFERS: 80 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion.
0604AIMMDWJEM EN © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED CA-MXJD5 COMPACT COMPONENT SYSTEM Mains (AC) Line Instruction (not applicable for Europe, U.
デバイスJVC CA-MXJD5の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC CA-MXJD5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC CA-MXJD5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC CA-MXJD5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC CA-MXJD5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC CA-MXJD5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC CA-MXJD5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC CA-MXJD5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC CA-MXJD5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
