JVCメーカーDT-3D24G1の使用説明書/サービス説明書
ページ先へ移動 of 36
MULTI FORMAT 3D LCD MONITOR DT-3D24G1 INSTRUCTIONS LCT2655-001A-H For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. : DT-3D24G1 Serial No. : CAUTION: To reduce the risk of electric shock.
2 Safety Precautions W ARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS V ASES, SHALL BE PLACED ON THE APP ARA TUS. IMPORT ANT SAFEGUARDS Electrical energy can perform many useful functions.
3 To prevent an accidental fall Fix the monitor to a wall by using strings. Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string.
4 Safety Precautions (cont.) European Union only Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
5 Table of Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Installation ● How to set up 1 You can tilt the monitor as follows. ● Be careful not to pinch your fingers in the gap between the monitor and the stand. ● When the stand plate is attached to the lower position of the stand body, you cannot tilt the monitor downward.
7 Connections 1 DC IN 24V terminal Terminal for DC 24V power supply (Voltage range: DC 23.3V − DC 25.5V). When using the DC 24V power supply (Voltage range: DC 23.3V − DC 25.5V), check the pin number, signal, and polarity of the DC IN 24V terminal.
8 Front panel 1 Speakers (stereo) The speakers emit the same audio signal emitted from the AUDIO MONITOR OUT terminals. ( → 7 “AUDIO MONITOR OUT(OUT (L), OUT (R)) terminals” on page 7) 2 VOLUME adjustment knob Adjusts the volume. 3 Picture adjustment knob CHROMA: Adjusts the picture color density.
9 5 MUTING button Turns off the sound when no menu screen is displayed (Muting). ● To cancel the function, press the button again or turn the VOLUME adjustment knob. ● Muting function is also canceled when “BALANCE” of “AUDIO SETTING” in the MAIN MENU is changed ( → page 21).
10 Daily Operations (cont.) Audio Channel Selection Select audio channels emitted from the speakers (L/R) and the AUDIO MONITOR OUT(OUT1(L)/OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the SDI terminal and SDI input is selected. ● You have to choose a group of selectable audio channels before the channel selection ( → “E.
11 On the Status Display If you press the INPUT SELECT button ( → o on page 9) currently lit, the status of the input signal and setting of MUTING are displayed for about 3 seconds. ● Make the setting to display/hide the status in “STATUS DISPLAY” of the “INFORMATION.
12 Viewing 3D images Basic 3D principle This product is a 3D LCD Monitor which adopts the Xpol® circular polarizing method. By having a filter of different polarization on every alternate scan line o.
13 To view existing 3D images View already 3D-processed images. 1 Input existing 3D images into the SDI IN 1/L, 2/R terminals or DVI-D terminal. Also compatible with DUAL LINK. ➔ 2 Press the INPUT SELECT button corresponding to the input images. 3 Press the 3D button.
14 Setting the CAMERA ASSIST MENU This product is equipped with various camera rig adjustment assist functions for 3D viewing. Use the functions for camera adjustment in shooting. Menu Operations 1 Press the CAMERA ASSIST button. The CAMERA ASSIST MENU appears.
15 SPLIT L image is displayed on the left of the SPLIT line, and R image on the right. You can check the difference between the images from the two cameras. LR SEQ. Images for the left and right eyes are displayed alternately at 0.5-second interval. ● A marker appears on the upper part of the screen, which distinguishes between L and R images.
16 Other 3D functions You can display the wave form monitor or vector scope, and compare and check the SDI IN 1/L and SDI IN 2/R input signals. ● Works in MIX mode. The operation to be performed differs in other modes. ( → page 9) ● Each time you press the SCOPE button, the display mode changes in the following order.
17 ● In Cursor mode, the lines of the following two groups are displayed: Group A: L line/R line/H line (Normal: Green / Over the LIMIT: Red ) Group B: L line/R line/H line (Normal: Magenta / Over the LIMIT: Orange ) • You can change a group to display by pressing the SELECT button.
18 Menu Operations 1 Display the menu. To display the MAIN MENU Press MENU button. ➔ To display the SET-UP MENU Press ➔ button while holding button. 2 Press buttons to select an item, then press button. ● For some items, adjustments will be made by pressing .
19 MAIN MENU PICTURE FUNCTION Setting for the picture quality. Item Content Setting value APERTURE *1 Activates/deactivates the function at the level set in “APERTURE LEVEL.” OFF, ON APERTURE LEVEL *1 Simultaneously corrects the frequency characteristics of the RGB colors.
20 ASPECT Setting value: 4:3, 16:9 Set the aspect ratio of images. ● Not activate when picture is displayed in the 1:1 mode. MARKER *1*2 Settings for marker functions. Item Content Setting value 1/2 AREA MARKER *3 Activate/deactivate the area marker and select the style of it.
21 AUDIO SETTING Settings for the audio output balance, EMBEDDED AUDIO signals and level meter. Item Content Setting value BALANCE Adjust the balance between the right and left speakers. L5 – L1, 0, R1 – R5 E.AUDIO GROUP *1 Select the audio channel group of the EMBEDDED AUDIO signals.
22 Menu Configuration (cont.) SCOPE SETTING *1 Configure the settings for the wave form monitor and vector scope. Item Content Setting value GAIN Adjust the input gain level. –10 – +10 SIZE *2 *3 Set the window size. NORMAL, LARGE POSITION *2 Select the window position.
23 SET-UP MENU FUNCTION SETTING Configure the sub menu display, the lighting color of the tally lamp, the size of images, the brightness of the button lamps. Item Content Setting value sub menu POSI. Select the contents and displaying position of “ sub menu.
24 Menu Configuration (cont.) REMOTE SETTING ( → “External Control” on pages 26) Settings for the external control. Item Content Setting value SERIAL TYPE Select the input terminal used for external control by serial communication. RS232C RS485 PARALLEL TYPE Select the external control method for the MAKE/TRIGGER terminal.
25 CONTROL LOCK Setting value: OFF, VOL.LOCK, ALL LOCK Settings for disabling the buttons on the front panel. ● The following operations are not available when “VOL.LOCK” is selected. – VOLUME adjustment knob – Picture adjustment knob ● The “ALL LOCK” function disables to control the buttons on the front panel.
26 External control About the external control This monitor has three external control terminals. ● MAKE/TRIGGER terminal (RJ-45): The following external control systems are available. 1 MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it.
27 <Functions controlled by the MAKE/TRIGGER system> Display Functions to be controlled Opening Short-circuiting TALLY SEL Selects the color of the tally lamp Green Red SDI 1/L Changes the input.
28 External Control (cont.) Using the serial communication You can control the monitor from a personal computer etc. via the RS-485 or RS-232C terminal.
29 <Basic command list> No. Commands Functions Data 1 ! ** *1 B C N 1 Cr Starts communication (connection) No data 2 ! ** *1 B C N 0 Cr Terminates communication (termination) No data 3 ! ** *1 B.
30 Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page Cannot turn on the unit.
31 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT lamps will flash. If this happens, follow the steps below and contact your dealer to resolve the problem.
32 Specifications General Model name DT-3D24G1 Type MULTI FORMAT 3D LCD MONITOR Screen size Type 24 wide format Aspect ratio 16:10 Compliant video signal format → “Available signals” on page 33 Format 3G SDI DUAL LINK HD SDI HD SDI SD SDI EMBEDDED AUDIO : : : : : SMPTE424M/SMPTE425M SMPTE372M BTA S-004C, SMPTE292M ITU-R BT.
33 Available signals The following signals are available for this monitor. Video signals No. Signal name Signal format shown in the status display ( → page 11) Input terminals E. AUDIO SDI (IN 1, IN 2) *1 DVI-D (HDCP) (Digital component/Digital RGB) SD/HD (1.
34 Dimensions Unit: mm (inch) <Front view> <Side view> <Rear view> Specifications (cont.) Computer signals (preset) DVI-D (HDCP) terminals No. Signal name Resolution Frequency Scan system Horizontal Vertical Horizontal (kHz) Vertical (Hz) 1 VGA60 640 480 31.
DT3D24G1_EN.indb 35 DT3D24G1_EN.indb 35 11.1.25 0:53:59 PM 11.1.25 0:53:59 PM.
0111SKH-MW-MT MUL TI FORMA T 3D L CD MONIT OR DT -3D24G1 © 2011 Victor Company of Japan, Limited DT3D24G1_EN.indb 36 DT3D24G1_EN.indb 36 11.1.25 0:53:59 PM 11.
デバイスJVC DT-3D24G1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC DT-3D24G1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC DT-3D24G1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC DT-3D24G1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC DT-3D24G1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC DT-3D24G1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC DT-3D24G1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC DT-3D24G1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC DT-3D24G1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。