JVCメーカーHR-J440Uの使用説明書/サービス説明書
ページ先へ移動 of 48
H R-J640U (Hi-Fi) HR-J440U (Monaural) VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0002-002A For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Model No. HR-J640U/HR-J440U Serial No.
2 EN Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. CAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
EN 3 IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical ener gy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety .
4 EN SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
EN 5 CONTENTS T IMER RECORDING 28 On-Screen Timer Programming ........... 28 Check And Cancel Programs ................................... 30 Auto T imer ...................................................... 31 Instant Timer Recording (ITR) .........
6 EN Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 45). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV 3 The connection method you use depends on the type of TV you have.
EN 7 INITIAL SETTINGS Plug & Play The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR.
8 EN INITIAL SETTINGS (cont.) Language This VCR offers you the choice to view on-screen messages in English, Spanish or French (not including messages superimposed on the TV picture). Select the desired language using this procedure. The default setting is "ENGLISH".
EN 9 Clock Perform clock setting only if the clock has not been set correctly by the Plug & Play function. Access the Override Auto Clock Set screen to choose the Auto, Semi-Auto or Manual clock setting procedure. Each procedure starts from step 5.
10 EN INITIAL SETTINGS (cont.) SELECT MODE 5 At the Override Auto Clock Set screen, move the highlight bar (arrow) to “SEMI-AUT O CLOCK SET” by pressing CH ▲▼ or SHUTTLE PLUS % fi , then press OK .
EN 11 SELECT MODE 5 At the Override Auto Clock Set screen ( Z pg. 10), move the highlight bar (arrow) to “MANUAL CLOCK SET” by pressing CH ▲▼ or SHUTTLE PLUS % fi , then press OK . SET DA TE, TIME AND D.S.T . 6 The Manual Clock Set screen is displayed and the month digit begins blinking.
12 EN T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS TUNER SET SCREEN 3 Move the highlight bar (arrow) to "TUNER SET" by pressing CH 5 ∞ or SHUTTLE PLUS % fi , then press OK .
EN 13 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH SHUTTLE PLUS The VCR detects the band (TV or CA TV) and selects the correct band automatically during Auto Channel Set. If necessary , you can check the setting at the Band screen.
14 EN Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 12. ● T o add a channel, go to step 2 . ● T o delete a channel, skip to step 4 . ACCESS AFC SCREEN 2 Move the highlight bar (arrow) to "AFC" by pressing CH 5 ∞ or SHUTTLE PLUS % fi , then press OK .
EN 15 SIMPLE PLA YBACK AND RECORDING Simple Playback LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’ t apply too much pressure when inserting.
16 EN Simple Recording LOAD A CASSETTE 1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. SELECT RECORDING CHANNEL 2 Press CH 5 ∞ . Or press the appropriate NUMBER keys, then press ENTER .
EN 17 Playback Features PLA YBACK AND RECORDING FEA TURES Still Picture/Frame-By- Frame Playback P AUSE DURING PLA YBACK 1 Press P AUSE . If there is vertical jitter , use the CH 5 or ∞ button to correct the picture. ACTIV A TE FRAME-BY - FRAME PLA YBACK 2 Press P AUSE repeatedly to advance one frame at a time.
18 EN Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually .
EN 19 Video Stabilizer Y ou can correct vertical vibration when playing back unstable EP recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF".
20 EN PLA YBACK AND RECORDING FEA TURES (cont.) Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen.
EN 21 Select The Soundtrack (HR-J640U Only) Y our VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together . 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH ACCESS MAIN MENU SCREEN 1 Press MENU during playback or when VCR is in stop mode.
22 EN PLA YBACK AND RECORDING FEA TURES (cont.) 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 FF REW PLAY REVIEW SKIP SEARCH Index Search Index codes are placed on the tape at the start of each recording. Y ou can find and automatically play back from the start of any recording using the Index Search function.
EN 23 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 FF REW FF PLAY POWER PLAY REW PAUSE STOP POWER DISPLAY C. MEMORY Repeat Playback ST AR T REPEA T 1 Press and hold PLA Y (until "PLA Y" blinks on the front display panel) during playback, then release.
24 EN PLA YBACK AND RECORDING FEA TURES (cont.) Auto Picture Auto Picture checks the condition of the tape and compensates accordingly , giving you the best-possible playback picture every time. The default setting is "ON". T urn on the TV and select the VCR channel 3 or 4 (or AV mode).
EN 25 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 Playback The VCR assesses the quality of the tape once you start playback. Before beginning, perform steps 1 and 2 on page 15 ("Simple Playback") before continuing. PLAY PLAY NOTE: ● The Auto Picture screen only appears at the beginning of automatic tracking.
26 EN PLA YBACK AND RECORDING FEA TURES (cont.) Record One Pr ogram While W atching Another ENGAGE TV MODE 1 During recording... ● Press TV/VCR . The VCR's V C R indicator goes out. (I f you are using the RF connection ( Z pg. 6) to view the output from your VCR, the TV broadcast being recorded disappears.
EN 27 Stereo And SAP (Second Audio Pr ogram) (HR-J640U Only) Y our VCR’ s built-in MTS decoder enables reception of Multi- channel TV Sound broadcasts. ● The ST indicator on the front display panel lights during stereo broadcast reception, and SAP lights during SAP program reception.
28 EN TIMER RECORDING Y ou can directly program the VCR’ s timer to record up to 8 shows, as far as a year in advance. Remember , the clock must be set before you can program the timer ( Z pg. 7 or 9). On-Screen Timer Pr ogramming LOAD A CASSETTE 1 Make sure the record safety tab is intact.
EN 29 MAKE CORRECTIONS 6 T o change any of the settings, press OK or SHUTTLE PLUS until the item you want to change begins blinking. Then set as in step 5 . RETURN TO NORMAL SCREEN 7 Press MENU as many times as necessary . ● Press just once to access the Auto T imer screen ( Z pg.
30 EN 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH POWER POWER TIMER CANCEL TIMER RECORDING (cont.) DISENGAGE TIMER 1 Press TIMER , then press POWER .
EN 31 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 2 2 q5 / 8 6 OK MENU MENU OK CH CH TIMER ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS FUNCTION SET SCREEN 2 Move the highlight bar (arrow) to "FUNCTION SET" by pressing CH 5 ∞ or SHUTTLE PLUS % fi , then press OK .
32 EN 2 2 q5 / 8 6 REC Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST AR T RECORDING 1 Press REC on the front panel.
EN 33 VIDEO IN AUDIO IN Recorder Player Y our VCR VIDEO OUT AUDIO OUT Edit T o Another VCR Y ou can use your VCR as the player and another VCR as the recorder . EDITING MAKE CONNECTIONS 1 Connect an AV cable between your VCR's VIDEO OUT and AUDIO OUT connectors and another VCR’ s VIDEO IN and AUDIO IN connectors.
34 EN 2 2 q5 / 8 6 EDITING (cont.) Edit Fr om A Camcorder Or Another VCR Y ou can use a camcorder or another VCR as the player and your VCR as the recorder . MAKE CONNECTIONS 1 Connect an A V cable between the camcorder ’ s or t he playback VCR's VIDEO OUT and AUDIO OUT connectors and your VCR’ s VIDEO IN and AUDIO IN connectors.
EN 35 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 CH NUMBER POWER TV/VCR MBR SET STOP SPECIAL FEA TURES TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below .
36 EN SPECIAL FEA TURES (cont.) Cable Box Multi-Brand Remote Control The VCR's remote control can control functions on the brands of cable boxes listed below . Some cable box brands have more than one code. If your cable box does not function with a specified code, try other codes.
EN 37 3 ¶ 4¢ 78 1 ¡ 1 2 3 456 7 8 0 9 POWER A/B NUMBER "1" NUMBER "2" UNPLUG VCR'S POWER CORD 1 Unplug from the AC outlet. SET REMOTE CONTROL CODE 2 While holding down A/B on the remote control, press the NUMBER key "2" and then press STOP .
38 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POSSIBLE CAUSE ● The power cord is disconnected.
EN 39 POSSIBLE CAUSE ● The clock and/or the timer have been set incorrectly . ● The timer is not engaged. ● The VCR has not been set up properly . ● T imer recording is in progress. ● The timer is engaged but there’s no cassette loaded. ● The loaded cassette has had its record safety tab removed.
40 EN QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
EN 41 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. A A/B Code .................................................................... 37 Add Channel ...................................
42 EN INDEX (cont.) FRONT VIEW 1 Power On/Off Button ( Z pg. 8) 2 Cassette Loading Slot 3 Rewind [REW] Button ( Z pg. 15) 4 PLA Y Button ( Z pg. 15) 5 Fast-Forward [FF] Button ( Z pg. 15) 6 VIDEO/AUDIO Input Connectors ( Z pg. 34) * The HR-J440U has only one AUDIO input connector .
EN 43 REAR VIEW FRONT DISPLA Y P ANEL ANT. IN RF OUT CH3 CH4 OUT R L AUDIO VIDEO 1 2 4 5 3 1 VCR Mode Indicator ( Z pg. 26) 2 T ape Speed Indicators ( Z pg. 16) 3 AM/PM Indicators ( Z pg. 7) 4 Clock Display ( Z pg. 7) 5 Multi-Channel TV Sound Indicators ( Z pg.
44 EN REMOTE CONTROL INDEX (cont.) 1 CABLE/DBS Button ( Z pg. 36) 2 TV Button ( Z pg. 35) 3 TV/VCR Button ( Z pg. 26) 4 MBR SET Button ( Z pg. 35) 5 DISPLA Y Button ( Z pg. 23) 6 ENTER Button ( Z pg. 16) On-Screen Display [OSD] Button ( Z pg. 20) 7 TIMER Button ( Z pg.
EN 45 GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption : 21 W (HR-J640U) : 19 W (HR-J440U) T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F.
46 EN HOW TO LOCA TE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-252-5722 JVC SER VICE & ENGINEERING COMP ANY OF AMERICA DIVISION OF US JVC CORP . F ACTORY SERVICE CENTER LOCA TIONS If you ship the product.
EN 47 LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below .
HR-J640U/440U COPYRIGHT © 1997 VICTOR COMPANY OF JAPAN, LTD. U/U(C) Printed in Malaysia 1296HOV * UN * PJ JV C COMP ANY OF AMERIC A DIVISION OF US JVC CORP .
デバイスJVC HR-J440Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC HR-J440Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC HR-J440Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC HR-J440Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC HR-J440Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC HR-J440Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC HR-J440Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC HR-J440Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC HR-J440Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
