JVCメーカーHR-V206Eの使用説明書/サービス説明書
ページ先へ移動 of 16
—1— January 31, 2003 6:55 pm Page 1 ENGLISH Master Page : Cover VIDEO CASSETTE RECORDER HR-V505/V506/V507E HR-V205/V206E INSTR UCTIONS LPT0811-001A Pr inted in Indonesia COPYRIGHT © 2003 VICT OR COMP ANY OF JAP AN, L TD . 0203-AH-CR-LG SAFETY FIRST .
January 31, 2003 6:13 pm Page 2 — 2 — Master Page: Ri ght When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
January 31, 2003 6:13 pm Page 3 — 3 — Master Page: Ri ght Front Panel A Tape-in Indicator B REC Indicator C VCR Indicator D Timer Indicator Rear Panel * HR- V505/V506/V507E only Remote control Butt ons, Connect ors and Indicat ors A TTENTION: Do not drop the tying band for fixing the main power cord into the inside of the recorder.
January 31, 2003 6:13 pm Page 4 — 4 — Master Page: Ri ght On-screen display If you press ( OK ) on the remote control when “ OSD ” is set to “ ON ” ( 墌 5), you can see the current recor der status on the screen. The indications except the clock or time counter disappears in about 5 seconds.
January 31, 2003 6:13 pm Page 5 — 5 — Master Page: Ri ght A Check contents Make sure the package contains a ll of the accessories listed in “ Specifications ” ( 墌 16). B Situate recorder Place the recorder on a stable, horizonta l surface. C Connect recorder to TV RF Connection A Disconnect the TV aerial cable from the TV.
January 31, 2003 6:13 pm Page 6 — 6 — Master Page: Ri ght D Perform Plug&Play setup Plug the mains power cord into a mains outlet. Turn on the recorder. The Country Set screen appear s. Press w e to select your country, then press OK . The clock and tuner channels will be set automatically.
January 31, 2003 6:13 pm Page 7 — 7 — Master Page: Ri ght Language Set You can change the language setting manually as required. A Access Main Menu screen Press MENU . Press w e to select the icon “ ABC OSD ” , then press OK . B Select language Press rt to select the desired language.
January 31, 2003 6:13 pm Page 8 — 8 — Master Page: Ri ght Manual Channel Set Store channels that were not stored during Plug&Play or Auto Channel Set. A Access Main Menu screen, then Manual Channel Set screen Press MENU . Press w e to select the icon “ PR SET ” , then press OK .
January 31, 2003 6:13 pm Page 9 — 9 — Master Page: Ri ght Changing station name (B) A Access Main Menu screen, then Manual Channel Set screen Press MENU . Press w e to select the icon “ PR SET ” , then press OK . ● The Manual Channel Set screen of the channel position currently received appears.
January 31, 2003 6:13 pm Page 10 — 10 — Master Page: Ri ght Basic Playback A Load a cassette Make sure the window side is up, the rear label side is facing you and the ar row on the front of the cassette is pointing towards the recorder. ● Do not apply too much pressure when inserting.
January 31, 2003 6:13 pm Page 11 — 11 — Master Page: Ri ght Accidental er asure prev ention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact.
January 31, 2003 6:13 pm Page 12 — 12 — Master Page: Ri ght Up to 7 timer recording programmes within a month can be made. Before starting: ● Set the clock properly. ( 墌 7) ● Set “ SYSTEM ” to the appropriate mode. ( 墌 4) ● Load a cassette with the record safety tab intact.
January 31, 2003 6:13 pm Page 13 — 13 — Master Page: Ri ght T imer Programming A Press ME NU . Press w e to select the icon “ REC ” , then press OK . The programme list appears. B Press OK . C Press the appropriate number ke ys to set the channel, date, start time and stop time.
January 31, 2003 6:13 pm Page 14 — 14 — Master Page: Ri ght Editing with another video recorder or a camcorder You can use your recorder as the source player or the recording deck. You can use a camcorder as the source player and your recorder as the recording deck.
January 31, 2003 6:13 pm Page 15 — 15 — Master Page: Ri ght Connecting to a satellite receiver Connect the decoder to the satellite receiver ’ s connector if you have a decoder, EURO AV1 AU DIO/VIDEO connector to TV ’ s connector, and EURO AV2 DECODER connector to the satellite receiver ’ s conn ector.
January 31, 2003 6:13 pm Page 16 — 16 — Master Page: Ri ght Specifications shown are for SP mode unless specified otherwise. E. & O.E. Design and specifications subject to change without notice. Specifications GENERAL Power : 200 V – 240 V d , 50 Hz/6 0 Hz Power consumption Power on : Approx.
デバイスJVC HR-V206Eの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC HR-V206Eをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC HR-V206Eの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC HR-V206Eの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC HR-V206Eで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC HR-V206Eを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC HR-V206Eの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC HR-V206Eに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC HR-V206Eデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。