JVCメーカーKS-FX201の使用説明書/サービス説明書
ページ先へ移動 of 24
INSTRUCTIONS §”·π–π” GET0023-001A [U] For installation and connections, refer to the separate manual. °√ÿ≥“¥Ÿ§ŸË¡◊Õ∑’Ë·¬°µË“ßÀ“° „π°“√µ‘¥µ—È.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERA TIONS ....................
3 ENGLISH 1 T urn on the power . 2 Play the source. T o operate the tuner , see pages 4 – 8. T o operate the tape deck, see page 9. T o operate the CD changer , see pages 15 – 17. 3 Adjust the volume. 4 Adjust the sound as you want (see pages 10 – 12).
4 ENGLISH 1 T urn on the power . 2 Select the band (FM1, FM2, FM3 or AM). Y ou can select any one of FM1, FM2, and FM3 to listen to an FM station. 3 Start searching a station. When a station is received, searching stops. T o stop searching before a station is received, press the same button you have pressed for searching.
5 ENGLISH Storing stations in memory 1 Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. 2 Press and hold the button for more than 2 seconds. Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3).
6 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Example: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the FM1 band. 2 T une into a station of 88.3 MHz. See page 4 to tune into a station.
7 ENGLISH 1 Select the band (FM1, FM2, FM3 or AM) you want. 2 Select the number (1 – 6) for the preset station you want. T uning into a pr eset station Y ou can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see page 5 or 6.
8 ENGLISH Scanning br oadcast stations When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcast.
9 ENGLISH T APE OPERA TIONS 1 T urn on the power . 2 Insert a cassette. When one side of the tape reaches its end during play , the other side of the tape automatically starts playing. (Auto Reverse) 3 Select the tape direction. • Pr ess the both buttons at the same time.
10 ENGLISH The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels. Each time you press LOUD, the loudness function turns on/off alternatively .
11 ENGLISH Y ou can adjust the treble/bass sound and the speaker balance. 1 Select the item you want to adjust. Indication T o do: Range BAS Adjust the bass –6 (min.
12 ENGLISH Y ou can adjust the sound modes (BEA T , POP , SOFT : see page 10) to your preference and store your own adjustments in memory . 1 Call up the sound mode you want to adjust. See page 10 for details. 2 T o adjust the bass or treble sound level Select “BAS” or “TRE.
13 ENGLISH OTHER MAIN FUNCTIONS 1 Press and hold the button for more than 2 seconds. “CLOCK H” or “CLOCK M” appears on the display . 2 Set the hour . 1. Select “CLOCK H” if not shown on the display . 2. Adjust the hour . 3 Set the minute. 1.
14 ENGLISH How to detach the control panel Before detaching the control panel, be sure to turn off the power . 1 Unlock the control panel. 2 Lift and pull the control panel out of the unit.
15 ENGLISH CD CHANGER OPERA TIONS We recommend that you use one of the CH-X series with your unit. If you have another CD automatic changer , consult your JVC car audio dealer for connections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cor d (KS-U15K) for connecting it to this unit.
16 ENGLISH T o fast for ward or reverse the track Press and hold ¢ , while playing a CD, to fast forward the track. Press and hold 4 , while playing a CD, to reverse the track. T o go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track.
17 ENGLISH Selecting CD playback modes T o play back tracks at random (Random Play) Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode changes as follows: Mode RND Indicator Plays at random RND1 Lights All tracks of the current disc, then the tracks of the next disc, and so on.
18 ENGLISH This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below . T o clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).
19 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • A cassette tape cannot be inserted. • Cassette tapes become hot. • T ape sound is at very low level and sound quality is degraded.
20 ENGLISH AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel Continuous Power Output (RMS): Front: 16 watts per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 16 watts per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
10 184 mm 53 mm Multi Music Scan KS-FX201 Installation/Connection Manual ENGLISH • This unit is designed to operate only on 12 volts DC, NEGA TIVE ground electrical systems. INST ALLA TION (IN-DASH MOUNTING) • The following illustration shows a typical installation.
• When using the optional stay • XO³¦²K wU{« bM «b²Ý« bMŽ XO³¦²K wU{« bM «b²Ý« bMŽ XO³¦²K wU{« bM «b²Ý« bMŽ XO³¦²K.
Before connecting: Check the wiring in the vehicle carefully . Incorrect connection may cause serious damage to this unit. 1 Connect the colored leads of the power cord to the car battery , speakers and automatic antenna (if any) in the following sequence.
Amplifier / / uB« rC TROUBLESHOOTING • The fuse blows. * Are the red and black leads connected correctly? • Power cannot be turned on. * Is the yellow lead connected? • No sound from the speakers. * Is the speaker output lead short-circuited? • Sound is distorted.
デバイスJVC KS-FX201の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC KS-FX201をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC KS-FX201の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC KS-FX201の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC KS-FX201で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC KS-FX201を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC KS-FX201の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC KS-FX201に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC KS-FX201デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
