JVCメーカーKV-C10の使用説明書/サービス説明書
ページ先へ移動 of 24
ENGLISH 3351396B01-0 [J] ESP AÑOL FRANÇAIS MOBILE TV TUNER SYSTEM KV -C10 For customer Use: Enter below the Model No . and Serial No . which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No.
2 ENGLISH Safety points (Be sure to follow these points) CAUTIONS • DO NOT USE THE TV TUNER SYSTEM WHEN THERE IS A PROBLEM OR MALFUNCTION. IF THE TV TUNER SYSTEM IS USED IN AN ABNORMAL CONDITION SUCH AS WHEN THE TV TUNER SYSTEM IS EMITTING SMOKE OR AN UNUSUAL SMELL, IT MA Y CAUSE A FIRE OR SOME OTHER PROBLEM.
3 ENGLISH Cautions for the liquid crystal panel (sold separately) • There are red spots, b lue spots and green spots on the panel surf ace. This is a characteristic of liquid cr ystal panels and is not a problem. Spots The liquid cr ystal panel is b uilt with v ery high precision technology and has at least 99.
4 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS CONTROLS AND FEA TURES ...............
5 ENGLISH CONTROLS AND FEA TURES TV tuner unit Back F ront 1 3 2 4 ANTENNA INPUT 1234 INPUT 2 VIDEO L AUDIO R VIDEO CONT INPUT 1 VIDEO L AUDIO R See pages in the parentheses f or details.
6 ENGLISH F ront Bac k To p 5 4 6 9 8 p 7 DOWN UP MODE POWER AUTO/MANU 1 2 3 Color monitor (KV -M700, sold separately) See pages in the parentheses f or details.
7 ENGLISH Remote controller (supplied with KV -M700) 1 2 4 5 7 8 3 6 9 y t e p w q r CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MODE SKIP A.MEMO CALL VOCAL R F MONI VCR RM-RK37 RM-RK37 VCR section VCR .
8 ENGLISH Installing the batteries When the controllable range or eff ectiveness of the remote controller decreases, replace the batteries. 1. Remove the back cover . While pushing on the bac k cover , slide it in the direction of the arrow . 2. Install the batteries.
9 ENGLISH CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MONI MODE BASIC OPERA TIONS Preparation Before operating the system, make sure that all external components are correctly connected and installed. F or connecting the external components, ref er to the instructions and the installations supplied with the external components.
10 ENGLISH 3 Select TV as the input source. Press the MODE button on the monitor or the remote controller repeatedly to select TV . 4 Select the channel y ou want to watch. Press the UP or DO WN button on the monitor or the 5 CH or ∞ CH on the remote controller to change the channels.
11 ENGLISH Storing channels in memory (A uto memory) The auto memory function picks up the TV broadcast signals in the area where you are and stores them automatically in memory . 1 Select TV as the input source. Press the MODE button on the monitor or the remote controller repeatedly to select TV .
12 ENGLISH Setting the channel selection Y ou can set the channel selection method either to select only the receivab le channels in memor y or to select all the channels . Remember that if you w ant to select only the receivab le channels, y ou must store the channels first.
13 ENGLISH W atching playback of external component Y ou can connect up to 2 external video components to the TV tuner unit. T o watch the pla ybac k, first f ollow steps 1 and 2 on page 9, then perf or m the follo wing steps . 1 Select the input source .
14 ENGLISH T o check the current input source Press the CALL button on the remote controller . The current input source name appears on the screen f or 3 seconds. T o turn off the power Press the POWER b utton on the monitor or the (power) b utton on the remote controller .
15 ENGLISH OTHER FUNCTIONS Setting the RF input This system provides RF input selector . When you use JVC FM modulator KS-IF200, y ou can listen to the sounds from the system through the receiv er equipped with no line input. F or connecting and setting KS-IF200, ref er to the instr uctions of KS-IF200.
16 ENGLISH ADJUSTMENTS Adjusting the color Y ou can adjust the color of the monitor system of KV -M700. This function can be operated only by using the remote controller supplied with KV -M700. CH CH COLOR BRIGHT CONTRA H/P VOL H/P VOL MODE SKIP A.MEMO CALL VOCAL R F MONI VCR RM-RK37 RM-RK37 1 Press the COLOR button.
17 ENGLISH Adjusting the brightness Y ou can adjust the brightness of the monitor system of KV -M700. This function can be operated only by using the remote controller supplied with KV -M700. 1 Press the BRIGHT button. The brightness level appears on the screen.
18 ENGLISH Adjusting the contrast Y ou can adjust the contrast of the monitor system of KV -M700. This function can be operated only by using the remote controller supplied with KV -M700. 1 Press the CONTRA button. The contrast level appears on the screen.
19 ENGLISH Adjusting the headphone volume Y ou can connect two pairs of headphones. When adjusting the headphone v olume, the adjustment applies to both connected headphones at the same time. • Y ou cannot adjust the headphone volume separately f or the HEADPHONE 1 and 2 jacks .
20 ENGLISH MAINTENANCE T o prevent damage to the system exterior • Do not apply pesticides, benzine , thinner or other volatile substances to the unit. The cabinet surface primarily consists of plastic materials. • Do not wipe with benzine, thinner or similar substances because this will result in discoloration or removal of the paint.
21 ENGLISH Remedies See page 3. Engage the parking break. Check the connection and correct it. Select the correct input mode. Install new batteries. Do not expose the remote sensor to strong light. P erform the auto memor y function again. Symptoms • Colored spots (red, blue and green) appear on the screen.
22 ENGLISH In the f ollowing environments , the image quality may be impaired. Mov ement Doubling and tripling of images (ghosts) Image quality gradually worsens and color instability (displa yed and .
23 ENGLISH SPECIFICA TIONS TV TUNER UNIT Input Antenna: Mini-jack × 4 Video: RCA pin × 2 circuits 1 V(p-p), 75 Ω Audio: RCA pin × 2 circuits 0.5 V(rms) V ocal: Mono mini-jack × 1 Video Control: Mono mini-jack × 1 Output Displa y: 8-pin DIN connector Video: RCA pin × 1 circuit 1 V(p-p), 75 Ω Audio: RCA pin × 1 circuit 0.
1100MNMMD WT AI EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED COVER.KV-C10[J] 00.11.28, 4:29 PM 2.
デバイスJVC KV-C10の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC KV-C10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC KV-C10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC KV-C10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC KV-C10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC KV-C10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC KV-C10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC KV-C10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC KV-C10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。