JVCメーカーLD-HD2KUの使用説明書/サービス説明書
ページ先へ移動 of 20
INSTRUCTIONS LD-HD2KU/LD-HD2KE ® DIGITAL VIDEO PROCESSOR LD-HD2KU For customer Use: Serial No. Model No. Enter below the Serial No. which is located on the side panel of the cabinet.
2 SAFETY PRECAUTIONS IMPOR T ANT SAFEGU ARDS IMPROPER USE OF THIS EQUIPMENT CAN RESUL T IN PO TENTIAL ELECTRICAL SHOCK OR FIRE HAZ- ARD . In order not to def eat the safeguards incorporated into this product, observe the f ollowing basic rules for its installation, use and ser vice.
3 – Do not ov erload wall outlets, e xtension cords, or con ve- nience receptacles on other equipment as this can result in a risk of fire or electric shock. –N ev er push objects of any kind into this product through openings as they ma y touch dangerous voltage points or shor t out par ts that could result in a fire or electric shock.
4 SAFETY PRECA UTIONS ............................................................................................................. .................................. 2 Q UICK ST AR T ...................................................................
5 QUICK START Connection with Other Devices Before connecting to other devices, ensure to turn off the power supply of the device to be connected with the digital video processor. 䡵 Connecting to a Projector ● Read through the projector’s instruction manual thoroughly.
6 INSTALLATION INSTALLATION Accessories The following accessories are packed together with this unit. Please confirm all items. If any item is missing, please contact your dealer. Placement The processor can be either placed on a table or rack mounted.
7 Satellite Receiver S-Video YPrPb HDTV DVI Alt. Conn. S-Video Input HD/PC Input YPrPb Input DVI Input RGBVH DVI Display Set Input to Transcode This unit Note 7 DVI Output: Digital output interface for compatible dis- plays.
8 SETUP FRONT PANEL CONTROL 1 Firmware Reset: Push a small paper clip into this opening to reset the unit’s CPU. ● Use this reset only if the unit will not respond to commands. It will not erase custom settings. Use the Factory Restore command in the Setup Menu to completely reset firmware.
9 SET : BLACK LEVEL (For setting the black level) 7.5 IRE / 0 IRE (Default) For setting the black signal level of the video signal. When the video signal is “7.
10 IR REMOTE/OSD ON SCREEN DISPLAY (OSD) Accessing the OSD 1. Press Menu button to bring up main Index. 2. Use Function Up/Down Keys until the triangle at the top of the OSD turns yellow. 3. Use the Left/Right keys to move to the next menu page. A list of available Functions will appear.
11 Note ● When using a 4:3 source on a Wide Angle screen there are black bars on the left and right of the image. The sidebars can be changed to gray using the Blanking Level control located in the Display menu. If filling the entire screen is desired, select Letterbox.
12 䡵 Display Menu Use these commands to adjust the image position and edge blanking. It is recommended to adjust sizing, position and blanking in the display device first with this unit in the Factory preset setting. Then use this unit’s controls only if the display runs out of range or does not offer these controls.
13 RS232 䡵 Patterns Menu The best approach to system setup is to use a DVD that offers the proper test patterns. This way, the system is aligned for the entire signal path. If a test DVD is not avail- able, then use the internal test patterns provided in this unit.
14 RS232 (continued) Following the header, a comma is used to delimit the header from the command. All the commands with their descriptions are listed below. All the text strings are terminated with a carriage return (0x0d or 13). Maximum command string length is 250 characters.
15 COMMAND BB# BL# BLT# CS# DVD DVE E# EXTD EXTE HP# LB# M# OSDOFF OSDON OUTMOD PYD PYE RB# RD RE SETFT STPP# STNP# SRHELP TB# VD VE VPOL# W# XD XE YD YE DESCRIPTION Bottom Blanking Border Level – b.
16 33.8 KHz 31.3 KHz 37.6 KHz 45.0 KHz 37.5 KHz 60.5 KHz 48.3 KHz 48.3 KHz 62.9 KHz 63.9 KHz 63.5 KHz 64.0 KHz 56.3 KHz 67.4 KHz TP1 100% COLOR BARS TP3 10 STEP GREY TP5 CB RAMP TP7 BLACK SCREEN TP9 R.
17 SPECIFICATIONS ● Design and specifications are subject to change without prior notice. ● Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.
18 ......................................................................................................................... ......................................................................................................................... ....
.
LD-HD2KU/LD-HD2KE ® VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan 0504-SW-VP © 2004 VICTOR COMPANY OF JAPAN, LIMITED DIGITAL VIDEO PROCESSOR.
デバイスJVC LD-HD2KUの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC LD-HD2KUをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC LD-HD2KUの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC LD-HD2KUの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC LD-HD2KUで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC LD-HD2KUを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC LD-HD2KUの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC LD-HD2KUに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC LD-HD2KUデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。