JVCメーカーLT-Z26S2の使用説明書/サービス説明書
ページ先へ移動 of 40
1 LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover WIDE LCD PANEL TV INSTRUCTIONS ENGLISH DEUTSCH FRANÇAIS NEDERLANDS CASTELLANO ITALIANO PORTUGUÊS Cover 1 LCT1488-002A-H LT-Z26S2 LCT1488-002A-H_Cover.
2 LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover Cover 2 LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover LCT1488-002A-H_Cover.fm Pag e 2 Friday, October 17, 2003 10:51 AM.
1 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.
2 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Failure to take the following pre cautions may cause damage to the te levision or remote control. DO NOT block the TV’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc.
3 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH CONTENTS Setting up your TV..................................4 Installation ................ ............. ................ ............. 4 Using the stand .............. ............. ............
4 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Ensure that the TV is installed on the wall by a skilled installer.
5 Setting up your TV LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Putting the batteries into th e Remote control Use two AA/R6 dry cell batteries. Insert the batteries from the - end, making sure the + and - polari ties are corr ect. • Follow the warnings printed on the batteries.
Setting up your TV 6 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Connecting the aerial and VCR • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. • Read the manual that came with the VCR befo re connecting. If not connecting a VCR (follow 1 1 1 1 ): Connect an aerial c able to the aerial sock et on this TV.
7 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Initial settings When the TV is first turned on, it enters the initi al setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initia l settings. 1 Make sure to set the VCR/TV/D VD switch to the TV position.
Initial settings 8 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH 6 Press the blue button to start the AUTO PROGRAM function The AUTO PROGRAM menu appears and received TV channels are automati cally registered in the Programme numbers (PR). • To cancel the AUTO PROGRAM function: Press the b button.
9 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH TV buttons and functions Refer to the pages in parentheses for details. 1 Remote control sensor 2 Power lamp (page 7) 3 MENU/OK button (page s 9, .
10 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Remote control buttons and functions 1 Muting button 2 Number buttons 3 Information but ton 4 c button 5 3 sound button 6 b button 7 5 buttons 8 .
11 Remote contro l buttons and function s LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Use the PR LIS T: 1 Press the h h h h (Information) button to display the PR LIST Pressing the h (Information) button changes the display as follows: 2 Press the 5 5 5 5 and 6 6 6 6 buttons to choose a Programme number (PR ).
Remote control buttons and functions 12 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH ZOOM function You can change the screen size according to the picture aspect ratio.
13 Remote contro l buttons and function s LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Displaying the current time You can display the Current Time on the screen.
Remote control buttons and functions 14 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Cancelling the PIP function: Press the R R R R button or b button. • If the main-picture signal is poor , the quality of the sub-picture may also be poor. • If the pictures have different standards, the top and bottom of one of them may be missing.
15 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Teletext function Basic operation 1 Choose a TV channel with a telete xt broadcast 2 Make sure to set the VCR/TV/D VD switch to the TV position.
Teletext function 16 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Sub-page Some teletext pages include sub-pages that are automatically d isplayed. 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed are au tomatically displayed at the top of the screen.
17 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Using the TV’s menu This TV has a number of functions you can operate using menus. To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully.
18 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH PICTURE SETTING Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically.
19 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH PICTURE FEATURES Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu. DIGITAL VNR The DIGITAL VNR function cuts down the amount of noise in the original picture. You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX.
PICTURE FEATURES 20 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH COLOUR SYSTEM The colour system is chosen aut omatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM. Then press the a a a a button The sub-menu of the COLOUR SYSTEM function appears.
21 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH SOUND SETTING Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
SOUND SETTING 22 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH HEADPHONE You need to use the HEADPHONE menu to adjust the volume of the headphones. The HEADPHONE menu can also be used to set whether or not sound comes from the TV speakers when the headphones are being used and to perform the settings for the sound coming from the headphones.
23 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH FEATURES Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu. SLEEP TIMER You can set the TV to autom atically turn of f after a specified period of time. 1 Choose SLEEP TIMER, then press the a a a a button A Sub-menu of the SLEEP TIMER function appears.
FEATURES 24 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH 3 Press the Number buttons to enter the ID number The lock is temporarily released so you can view the TV channel. If you have forgotten the I D number: Perform step 1 of “To set the CHANNEL GUA RD function”.
25 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH INSTALL Refer to “Using the TV’s menu” (see page 17) for details of displaying the menu. LANGUAGE You can choose the language you want to use for the on- screen display from the language list in a menu.
INSTALL 26 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH 2 Follow th e operation des cription of a function you want to use and op erate the function MOVE: This function changes a Programme number (PR) of a TV channel. ID: This function registers a Channel name (ID) to a TV channel.
27 INSTALL LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH 4 Press the Number buttons to enter the remaining CH/CC number The TV shifts to registration mode. When the regist ration is completed, the p icture of the TV channel appears on the screen.
INSTALL 28 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Changing the TELETEXT LANGUAGE setting After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.
29 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything : • Read the manuals provided with the devices.
Additional preparation 30 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Connecting devices to the OUT terminal The signals of the images and sound you are currently viewing with this TV are output throu gh the OUT terminal. By connecting a VCR to the OUT terminal, you can record the currently shown image and sound to that VCR.
31 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH CH/CC numbers When you want to use the INSERT function on page 26, find the CH/CC number corr esponding to the Channel number of the TV channel from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc.
32 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well befo re you request having the TV repair ed. You may be able to fix it easily by yourself.
33 Troubleshooting LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Other concerns • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV is turned off suddenly, try to press the # (Standby) button to turn on the TV once again.
34 LT-Z26S2 (ASIA) / LCT1 488-002A-H / English ENGLISH Specifications Design and specifications subject to change without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, h otels, etc.
LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover page 35 LCT1488-002A-H_Cover.fm Pag e 3 Friday, October 17, 2003 10:51 AM.
LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover page 36 LCT1488-002A-H_Cover.fm Pag e 4 Friday, October 17, 2003 10:51 AM.
Cover 3 LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover LCT1488-002A-H_Cover.fm Pag e 5 Friday, October 17, 2003 10:51 AM.
© 2003 VICTOR COMPANY OF JAPAN, LIMITED 6 LT-Z26S2 (ASIA) / LCT1488-002A-H / All cover Cover 4 1003-MK-CR-JMT LCT1488-002A-H_Cover.fm Pag e 6 Friday, October 17, 2003 10:51 AM.
デバイスJVC LT-Z26S2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC LT-Z26S2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC LT-Z26S2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC LT-Z26S2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC LT-Z26S2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC LT-Z26S2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC LT-Z26S2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC LT-Z26S2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC LT-Z26S2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。