JVCメーカーSP-UXG70の使用説明書/サービス説明書
ページ先へ移動 of 47
MICRO COMPONENT SYSTEM UX-G70 —Consists of CA-UXG70 and SP-UXG70 INSTRUCTIONS GVT0181-003A [B] SUPER VIDEO Cover[B].fm Page 1 Tuesday, March 28, 2006 11:19 AM.
G-1 Warnings, Cautions and Others CAUTION— (Standby/on) button! Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The (Standby/ on) button in any position does not disconnect the mains line.
G-2 Information for Users on Disposal of Old equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life.
G-3 SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
1 Precautions Installation • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System. • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Leave sufficient distance between the System and the TV.
2 Playable Disc Types In addition to the above discs, this System can playback audio data recorded on CD-Extra. • The following discs cannot be played back: DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD, CD-G (CD-Graphics) and DVD/CD Text. Playing back these discs will generate noise and damage the speakers.
3 Connections • Connect AV directly to the video input of your TV. Connecting AV to a TV via a VCR may interfere with your viewing when playing back a copy-protected disc. Connecting AV to an integrated TV/VCR system may also interfere with your viewing.
4 ~ Powered subwoofer The subwoofer connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals in DVD multi-channel discs. • Before plugging the unit to the main supply, make sure that the powered subwoofer is turned off.
5 ⁄ Digital audio component • Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 33). If the setting is incorrect, loud noise may be generated causing damage to the speakers.
6 Display Indicators The indications on the display tell you a lot of things while y ou are operating the System. Befor e operating the System, be familiar with when and how the indicator illuminates on the display . 1 Disc tray indicators • 1–5: Disc tray number indicators.
7 Daily Operations —Playback 1 Turn on the power. The STANDBY lamp on the main unit goes off. • Without pressing AUDIO, the System turns on by pressing one of the source buttons. • The System turns on and changes the source to LINE by starting playback on an external device when QP Link is activated.
8 Listening to the Radio To select the band (FM or AM) To tune in to a station While FM or AM is selected... Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.
9 Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video/DVD-VR comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA/MPEG-1/ MPEG-2/AS.
10 To locate a particular portion While playing a disc... • Search speed changes as illustrated above except for MP3/ WMA/DivX discs. For MP3/WMA/DivX discs, search speed and the indications on the TV are different. • No sound comes out if searching is carried out while showing the moving picture.
11 Playing Back a Portable Audio Device By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device connected to the LINE IN jack (see page 5). • Make sure to set the volume of your portable audio device loud enough so that the System can detect the sound signal.
12 Daily Operations —Sound & Other Adjustments Adjusting the Volume You can adjust the volume level from VOL MIN to level 40 (VOL MAX). To drop the volume in a moment Adjusting the Sound To reinforce the heavy sound This boosts the low and high frequency sound—Sound Turbo I I.
13 Creating 3-dimentional Sound Field —3D Phonic • This does not function for MPEG-1/MPEG-2/ASF/DivX discs. While playing a disc... • The selected mode can only be shown on the TV. Presetting Automatic DVD Video Sound Increase Level DVD Video sound is sometimes recorded at a lower level than other discs and sources.
14 Changing the Display Brightness You can dim the display window. * “AUTO DIM” does not work for CD/MP3/WMA. Changing the Scanning Mode This System supports progressiv e scanning.
15 3 Adjust the parameter. 4 Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again while holding SHIFT, or wait for more than 5 seconds. Setting the Clock Without setting the built-in clock, you cannot use Daily Timers (see page 30) and Sleep Timer.
16 Advanced Radio Operations Receiving FM Stations with Radio Data System Radio Data System allows FM stations to send an additional signal along with their regular program signals. This System can receive the following types of Radio Data System signals.
17 Switching Temporarily to a Program of Your Choice Automatically The Enhanced Other Networks function allows the System to switch temporarily to a preset FM station broadcasting a program of your choice (TA, NEWS, or INFO). • This function works while listening to an FM station providing the required signals.
18 Unique DVD/VCD Operations Selecting the Audio Track For DVD Video/DivX: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
19 Selecting the Subtitle Language For DVD Video/DivX: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off.
20 2 Enter the key number. 3 Follow the interactive instructions shown on the screen. To cancel the key number entry, press 7 . Making Dialogues Clear—Clear Voice When you playback a disc, you can use this function—Clear Voice. You can make the singer’s voices or dialogues of the movie clear.
21 Advanced Disc Operations Programming the Playing Order— Program Play You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. • Program play cannot be used for DVD-VR/JPEG/ MPEG-1/MPEG-2/ASF/DivX. • Resume does not work for Program Play.
22 3 Start playback. To check the programmed contents Before or after playback... • You can also use 4 or ¢ to check the programmed contents. To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random—Random Play You can play all chapters or tracks at random.
23 Playing Repeatedly • You can also select the repeat mode using the on-screen bar (see pages 25 and 26). • For MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX, see page 29. Repeat Play You can repeat playback. • For DVD Video/Audio: While playing... • For CD/SVCD/VCD: While playing (without PBC for SVCD/VCD) or before playback.
24 On-screen Disc Operations You can check the disc information and use some functions through the on-screen bar. Remote ONLY INFO 2 OFF 1/3 1/3 1/3 TIME 4 TITLE 14 TOT AL 1:25:58 CHAP 23 D VD-VIDEO TITLE 2 TIME OFF CHAP . 1 / 31 / 3 1 / 1 TIME 0:00:58 CHAP 3 Dolby D 3/2.
25 To operate using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video While a disc is selected as the source... 1 Display the entire on-screen bar. * This does not appear for MP3/WMA/JPEG/MPEG-1/ MPEG-2/ASF/DivX discs. 2 Select (highlight) the item you want.
26 4 Select the repeat mode you want. * During Program Play and Random Play, “STEP” appears. 5 Finish the setting. A-B Repeat • See also page 23. 1 While playing, display the entire on-screen bar. 2 Select . 3 Display the pop-up window. 4 Select “A-B.
27 4 Enter the desired chapter/track number. • To correct a mis-entry, press the number keys until the desired number shown in the pop-up window. 5 Finish the setting. Browsable Still Pictures • See also page 19. For DVD Audio only: While playing back a track linked to browsable still pictures (B.
28 Operations on the Control Screen You can search for and play the desired items through the control screen for MP3/WMA/JPEG/MPEG-1/MPEG-2/ ASF/DivX discs. Control screen for MP3/WMA/JPEG/MPEG-1/ MPEG-2/ASF/DivX discs The control screen automatically appears on the TV screen when you load an MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF or DivX disc.
29 • You can select a group directly by pressing a number button after pressing GROUP/TITLE (except for DVD-VR disc). To repeat MP3/WMA playback While playing or before playback... To repeat slide-show for JPEG While playing or before playback... To repeat MPEG-1/MPEG-2/ASF/DivX playback While playing or before playback.
30 Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite music. You can store three Daily Timer settings; however, you can activate only one of the timers at the same time. • To exit from the timer setting, press CLOCK/TIMER as required.
31 1 Set the hour then the minute for on-time. 2 Set the hour then the minute for off-time. 3 Select the playback source—“TUNER-FM,” “TUNER-AM,” “DISC,” or “LINE IN.
32 Setup Menu Operations INFO Initial settings The Setup Menu cannot be activated during playback. 1 Press SET UP. 2 Press ( or ) to select the menu. 3 Press ( or ) to select the item. 4 Press ENTER/SET. 5 Press ( or ) to select the options, then press ENTER/SET.
33 AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear. PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built- in Dolby Digital decoder.
34 Additional Information Learning More about This System Connections (see pages 3 to 5) • Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord.
35 • For JPEG files playback... – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play only baseline JPEG files*.
36 Playing Back from the PC: • Check if your PC equipped with the CD-ROM drive is running on Windows R 98*, Windows R 98SE*, Windows R Me*, Windows R 2000*, or Windows R XP* and prepare its CD-ROM. *Microsoft R , Windows R 98, Windows R 98SE, Windows R Me, Windows R 2000 and Windows R XP are registered trademarks of Microsoft corporation.
37 Timer Operations (see pages 30 and 31) Setting the Timer: • If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when the timer is activated. • When you unplug the AC power cord or if a power failure occurs, the timer will be canceled.
38 Troubleshooting General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference.
39 Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Ti.
40 OPTICAL DIGITAL OUT Signals * While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD OPTICAL DIGITAL OUT terminal. Operating JVC’s TVs Using the Remote Control You can use the remote control to operate JVC’s TVs.
41 Specifications Amplifier section—CA-UXG70 Output Power: 160 W (80 W+80 W) at 6 Ω (10% THD) Audio Input LINE IN: 500 mV/49 k Ω (at “L.IN LVL1”) 250 mV/49 k Ω (at “L.IN LVL2”) 125 mV/49 k Ω (at “L.IN LVL3”) TV SOUND IN: 500 mV/49 k Ω Audio Output LINE OUT: 1.
42 Parts Index Remote control Main unit Button Page AUDIO a 7, 31 TV s 40 7 7 7 7 w 9, 10, 20, 22, 29 ¡ ¡ ¡ ¡ , 1 1 1 1 r 8, 10 ¢ ¢ ¢ ¢ , 4 4 4 4 v 8, 10, 22, 29 8 8 8 8 e 9, 20, 22, 28 , ENTER/SET 8 8, 10, 13, 14, 15, 19, 20, 22, 25 – 32 C.
0406WMKMDCJEM EN © 2006 Victor Company of Japan, Limited UX-G70 MICRO COMPONENT SYSTEM Cover[B].fm Page 2 Tuesday, March 28, 2006 11:19 AM.
デバイスJVC SP-UXG70の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC SP-UXG70をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC SP-UXG70の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC SP-UXG70の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC SP-UXG70で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC SP-UXG70を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC SP-UXG70の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC SP-UXG70に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC SP-UXG70デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
