JVCメーカーVN-RS800Uの使用説明書/サービス説明書
ページ先へ移動 of 36
V ideo Management Sof tware V N - R S 8 0 0 U Setup Manual LST0572-001G.
Getting S t arted Thank you for using the VN-RS800U video m anag e m ent software (hencefort h VN-RS800). The VN-RS800 video management software is comprised of the various groups of services that provide the different functions, the [VN-RS800Viewer] vi ewer application software, and the [VN-RS800Setup] setup tool.
Please carefully read this End-User License Agreem ent ("Agreement") before installing or using the Video Management Software [VN-RS800] ("Software") on your PC.
SOFTWARE. YOU WILL INDEMNIFY AND HOLD HA RMLESS JVC FROM ANY LOSS, LIABILITY OR COSTS ARISING OUT OF OR IN ANY WAY CONNECTED TO CLAIMS FROM ANY OTHER PERSONS RELATING TO THE USE OF THE SOFTWARE.
Content 1. Software Installation ..........................................................................................................................6 1.1. Setup ...................................................................................
1. Software Installation 1.1. Setup * Log on as an authorized Windows administrator. * Install the new version after uninstalling the ex isting version. * Please uninstall VR-TS500 when VR-TS500 is insta lled. 1.2. Installation (1) Execute the VN-RS800U Installer.
(3) After installation is successfully completed, the insta llation complete screen appears. Click [Close] to end the wizard. Installation of VN-RS800 is complete. 1.3. Uninstallation * To uninstall VN-RS800, do so using [Add or Rem ove Prog ram s] of the Control Panel.
2. Software Settings 2.1. Starting Up the Setup Tool * Double-click the “RS800Setup” icon on the Desktop, or click [Start] – [All Programs] – [JVC] – [VN-RS800] – [RS800Setup]. * Upon loading the setting data, the password entry screen appears.
2.2. System Setting This is used for performing common setting of the system. * Click the “System Setting” button on the upper center of the setup tool screen. * The system setting screen appears, and setting can be performed as follows. (1) (2) (3) (4) System Setting Screen (1) RS No.
(3) System Password (Within 8 letters) The system password is used for t he startup check of the setup tool and verification of the various services. (4) Title Name (Within 32 letters) The title Name of the viewer application is displayed. (The title name of the setup t ool may also be displayed.
(17) Log File Keeping Period (0 – 365 day[s]) The keeping period of the log f ile is set. If "0" is specif ied, the keeping period becomes unrestricted. Please set it for 1 - 365 day(s) usually. (18) Enable Alarm Sound When the alarm is received, t he sound file is played back.
2.3. Unit Registration This is used for registering t he unit to be used with VN-RS800. * Select the “Unit Registration” tab. When the unit registration tab is selected * Only registered units are displayed in the “Unit List”.
* To register a new unit, click the “Register” button. * The “Unit Registration” screen appears. Unit Registration Screen * Enter the “IP Address” and select the “Unit Type”. * Click the “Next” button. The setting screen correspondi ng to the unit type is displayed, which allows setting as shown below.
For entering the password for logging into the unit. (4) Unit Name (Within 32 letters) For entering the name of the unit. (5) Video CH [1 – 4] Turning on the “Use” check box enables use of the corre sponding vide o channel.
[For unit types other than VN-E4] (1) Setting Screen for Units Other Than VN-E4 (1) IP Address For setting the IP address of the unit. (2) User Name (admin / operator / user) For entering the user name for logging into the unit. * It is displayed only for VN-V26/V686/X35.
Alarm Setting ” (to be explained later). (7) Request Mode (Normal / High Speed) When "High Speed" is selected, the im age is acquired in the high-speed mode. * It is displayed only for VN-C625/C655/C205. * Please note the following points when you select "High Speed".
* When setting is complete, click the “OK” button to close the “Unit Setting” screen. * To change the settings of a registered unit, select the unit to alter from the unit list, followed by clicking the “Modify” button. * Screens and procedures when c hanging settings are similar to those for unit registration.
2.4. Camera Setting * This used to perform various settings for video input units on t he screen where the “Camera Setting” tab is selected. When the Camera Setting tab is selected * Video channels that are registered via “Unit Regi stration” are displayed on the “Camer a List”.
2.4.1. Camera Property Setting * To alter the camera settings, select a camera, and click the “Property” button. Doing so enables setting as follows. Camera Property Screen (1) (2) (3) (4) (5) (6) (1) Live Maximum Rate (From -60 to 30 fps, except 0) Enter the maximum frame rate during live display.
2.4.2. Camera Display/Position Registration * Select a camera from the list, followed by clic king the “Camera Display/Position Registration” button to display the “Camera Display/Position R egistration” screen for checking the video images.
* To close the “Camera Display/Position Regi stration” screen, click the “Close” button. (Precautions) * In the case of VN-V686, the HOME pos ition uses setting of the camera side. Each value of "Pan”, ”T ilt”, and ”Zoom" cannot be set though "Position Name" can be set.
2.5. Alarm Event Registration * This is used to control camera recording acti ons that are associated wi th alarm occurrences as “alarm events”. * Register alarm events on the screen where the “A larm Event Registration” tab is selected.
Alarm Event Registration Screen (1) (2) (4) (1) Alarm List Select the alarm for which recording is to be triggered. (2) Camera List Select the camera to perform recording when an alarm occurs.
Set the time for displaying the alarm message on the live screen of the viewer application. (4) Frame Rate (1 – 30 fps) Set the frame rate for alarm recording. (5) Recording Time (10 – 3600 seconds) Set the time for alarm recording. * When setting is complete, click the “Add” button to add the alarm event.
2.6. Schedule Registration * This is used to manage the schedule for performing automatic recording on a specified date/time. * Register the schedule on the screen where the “Schedule Registration” tab is selected. When the Schedule Registration tab is selected * Schedules that are registered in the “Schedule List” are displayed.
* To add a new schedule, clic k the “Register” button. The “Schedule Registration” screen appears. Register the recording schedule by setting as follows. Schedule Registration Screen (1) Duration Select either “Do not specify” or “Specify”.
Select the camera to perform the scheduled recording. * When setting is complete, click the “OK” butt on to close the “Schedule Registration” screen. * To change t he settings of a regist ere d schedule, select the schedule to alter from the list, followed by clicking the “Modify” button.
2.7. User Registration * Register the user on the screen where the “User Registration” tab is selected. * Use the user name and password registered her e to start up the viewer applic ation. When the User Registration tab is selected * Users that are registered in the “User List” are displayed.
* To add a new user, click the “Register” button. The “User Registration” screen appears. Regi ster the user by setting as follows. User Registration Screen (1) (1) User Name (Within 8 letters) Enter the name of the user to be registered.
* To delete a registered user, select the user to delete from the user list, followed by clicking the “Delete” button. 2.8. Reflection of Settings Setting Start Button * When the settings are complete, click the “S etting Start” button to reflect the settings.
3. Other Controls 3.1. Restarting the Service * One of the emergency measures to take when system abnormalitie s occur, such as when images are not renewed or recorded, is to re start the various groups of services. * To restart the various groups of services, click [Start] – [All Pr ograms] – [JVC] – [VN-RS800] – [RestartService].
4. Backup and restoration Please kindly refer to the instruction manual of each backup software regarding the detailed procedure both backup and restoration. When you use VN-RS800 together backup sof tware at the same time, you are strongly requir ed to use it after evaluating the ac tual performance once.
(The alarm data base is backed up.) ・ It is necessary to stop the service of the data bas e of VN-RS800 once. (T ime that the alarm between a few seconds cannot record before it backs up is needed.) * Refer to 4.3 (1), (2) (Restoration and Search) ・ While VN-RS800 operation, backup data not allow ed to restore, search and playback.
VN-RS800. ・ Please execute "UninstallPlayOnly . bat" of "C:¥Program Files¥JVC¥SCoF¥bin¥" to return the regular version the VN-RS800 playback-only version. (4) Method of restarting all services ・ It is necessary to restart serv ice to reflect the setting in service after the confi guration file is restored.
5. Operating Suggestions 5.1. Personal computer setting Do not set your computer to enter “System standby ” or “System hibernates” mode when VN-RS800 i s in operation. The operation of VN-RS8 00 during “Syste m standby” or “System hibernates” mode is not guaranteed.
COPYRIGHT © 2008 Victor Comp any of Japan, Limited 36.
デバイスJVC VN-RS800Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC VN-RS800Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC VN-RS800Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC VN-RS800Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC VN-RS800Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC VN-RS800Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC VN-RS800Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC VN-RS800Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC VN-RS800Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
