JVCメーカーXL-FZ158BKの使用説明書/サービス説明書
ページ先へ移動 of 20
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
W arnings, Cautions and Others CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page 1 Load compact discs only Never insert anything other than compact discs into any part of the player. If a problem persists If something goes wrong, turn off the power immediately. If the same problem reoccurs when the power is turned on once more, turn off the power again and consult your JVC dealer.
Page 2 INTRODUCTION Names of buttons AC POWER CORD inlet COMPU LINK-3 (SYNCHRO) jacks OUTPUT jacks PHONES: head- phones jack PHONES LEVEL control POWER button CALL: displaying program contents button .
Page 3 EX- CHANGE REPEAT I DISC TRACK TOTAL TIME STEP PROGRAM RANDOM 1 2 3 4 5 1 6 11 16 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 PROGRAM button CONTINUE button DISC buttons TRACK buttons REPEAT butto.
Page 4 BEFORE USING FOR THE FIRST TIME Best location Select a location which is level, dry and neither too cold nor too hot (temperature range 5°C (41°F) to 35°C (95°F)).
Page 5 To connect the AC power cord of the main unit The AC power cord is supplied separately and must be connected to the unit. Plug the AC power cord into the AC POWER CORD inlet of this unit and connect to the wall outlet after all connections are complete.
Page 6 BEFORE USING FOR THE FIRST TIME COMPU LINK connection JVC’s COMPU LINK Remote Control System provides unified control over system components connected with COMPU LINK. Connecting JVC audio components with the COMPU LINK jacks automatically controls relative operations between components and facilitates various operations.
Page 7 Turning on the power of this unit Press the POWER button to turn on this unit. The STANDBY indicator is turned off and the display is turned on. Press again to turn off the power and activate the standby mode. The STANDBY indicator is lit. The power is automatically turned on also by; ÷ Pressing the 0 OPEN/CLOSE button.
Page 8 Skipping to a desired disc Use the DISC SKIP button. Each time the DISC SKIP button is pressed, the selected disc number switches from 1 to 5, then back to 1. Skipping to a desired track Use the 4 / ¢ buttons. To skip back to the beginning of the track being played, tap the 4 button.
Page 9 During playback of a disc, you can change other discs in the disc tray without stopping playback. Press the EXCHANGE button. The disc tray opens and you can change the discs inside. To change the discs loaded in the far end of the disc tray, press the DISC SKIP button to make the disc tray rotate.
Page 10 You can play only the favorite tracks in any desired order. 1. In stop mode, press the PLAY MODE button on the main unit or the PROGRAM button on the remote control unit so that the PROGRAM indicator lights on the display. 2. Select the disc which contains the track to be programmed with the DISC button.
Page 11 You can select and play tracks in random order from all the discs loaded in the unit. Selections are made so that each track is played only once.
Page 12 GENERAL INFORMA TIONS COMPU LINK remote control system Automatic source selection When the supplied COMPU LINK cord is utilized to connect this unit to others equipped with COMPU LINK jacks, switching-in of each system component can be performed with a single touch on the source selector button located on a JVC amplifier or receiver.
Page 13 How to handle CDs When handling compact discs, do not touch the surface of the disc (re- flective silver side — the side without the label). Since compact discs are made of plastic, they are easily damaged.
Page 14 GENERAL INFORMATIONS General Format: Compact disc digital audio Signal detection system: Non-contact optical detection CD capacity: 5 discs Sampling frequency: 44.1 kHz Power requirements U.S.A. AC 120 V , 60 Hz Power consumption: 10 watts Dimensions (W x H x D): 435 x 128 x 386 mm (17-3/16 x 5-1/16 x 15-1/4 inches) Mass: 5.
Page 15 We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer.
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
LIMITED W ARRANTY A UDIO-1 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, e xcept as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIAL AND W ORKMANSHIP from the date of original retail purchase for the period as shown belo w .
VICTOR COMP ANY OF JAP AN , LIMITED J V C EN 0199AOMOKGJEM.
デバイスJVC XL-FZ158BKの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC XL-FZ158BKをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC XL-FZ158BKの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC XL-FZ158BKの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC XL-FZ158BKで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC XL-FZ158BKを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC XL-FZ158BKの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC XL-FZ158BKに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC XL-FZ158BKデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。