AastraメーカーSIP 53Iの使用説明書/サービス説明書
ページ先へ移動 of 818
Administrator Guide Release 2.1 SI S I P I I P PHONE P H O N E 53i, 55i, 57i, 57i C 5 3 i , 5 5 i , 5 7 i , 5 7 i C T 41-001 160-00 Rev 04.
Aastra T elecom will not accept liabili ty for any damages and/or long di stance char ges, which result from unauthorized and/or unl awful use. While every effort has been made to ensure accuracy , Aastra T elecom will not be liable for technical or editorial erro rs or omissions contained within th is documentation.
41-001160-00, Release 2.1, Rev 04 iii Software License Agreement Aastra T e lecom Inc., hereinafter known as " Seller", g rants to Cu stomer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive , restricted use license to use Software in ob ject form solely with the Equipment for which the Software was inte nded.
.
41-00116 0-00, Rel ease 2.1 R ev 04 v Contents Contents Preface About this guide ........... ................ ............. ............. ................ ............. ................ ............ . xiii . Introduction ........ ............. .......
vi 41-001160-00, Release 2.1 Rev 04 Contents Chapter 2 Configuration Interface Methods . About this chapter ..... .......... ... ............. ................ ............. ............. ............. ............. ........ 2 -1 . Configuration Methods .
41-00116 0-00, Rel ease 2.1 R ev 04 vii Contents Chapter 4 Configuring Network and Session Initiation Pr otocol (SIP) Features . About this chapter ..... .......... ... ............. ................ ............. ............. ............. .........
viii 41-001160-00, Release 2.1 Rev 04 Contents XML Beep Support ....................... ................ ................ ............. ................ ............. 5-48 . S tatus Scroll Delay ... ................. ............. ................ ...
41-00116 0-00, Rel ease 2.1 R ev 04 ix Contents Chapter 6 Configuring Advanced Operat ional Features . About this chapter ..... .......... ... ............. ................ ............. ............. ............. ............. ........ 6 -1 . Advanced Operational Features .
x 41-001160-00, Release 2.1 Rev 04 Contents Chapter 9 T roubleshooting . About this chapter ..... .......... ... ............. ................ ............. ............. ............. ............. ........ 9 -1 . T r oubleshooting ........ ........
41-00116 0-00, Rele ase 2.1 Rev 04 xi Contents SIP Basic, Global Settings .............. ................ ............. ................ ............. ............ A-41 . SIP Basic, Per-Line Settings ........... ................ ............. ........
xii 41-001160-00, Release 2.1 Rev 04 Contents Softkey/Programmable Key/Feat ure Key/Expansion Module Ke y Parameters ......... A-136 . Softkey Settings for 55i, 57i, 57i CT ... .... ......... ............. ................ ............. .......... A-137 .
41-00116 0-00, Rele ase 2.1 Rev 04 xiii Contents Appendix D Sample Configuration Files . About this appendix ............ ............. ................ ............. ................ ............. ................ .... D-1 . Sample Configuration Files .
xiv 41-001160-00, Release 2.1 Rev 04 Contents XML Image Objects (55i, 57i/ 57i CT only) ............. ............. ................ ............. ..... G-48 . Attributes/Options to Use with XML O bjects ............. ................ ................
41-001160-00, Release 2.1, Rev 04 xiii Preface Preface About this guide Introduction This SIP IP Phone Administrator Guide provides information on the basic network setup, operation, and maintenance of the IP phon es, Models 53i, 55i, 57i, and 57i Cordless (57i CT).
About this guid e xiv 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Preface Other Document ation The IP phone do cumentation consists of: • <Model-specific> SIP IP Phone Ins.
41-001160-00, Release 2.1, Rev 04 xv Preface Chapters and appendi xes in this guide This guide contains the following chap ters and appendixes: For Go to An overview of the IP Phone firmwa re installa.
.
41-001160-00, Release 2.1, Rev 04 1-1 Overview Chapter 1 Overview About this chapter Introduction This chapter briefly describes the IP Phone Models, and provides informatio n about installing the IP phone firmware. It also describes the firmware and configuration files that the IP phone models use for op eration.
IP Phone Models 1-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview IP Phone Models Description The IP Phone Models 53i, 55i, 57i, and 57i CT communicate over an IP network allowing you to receive and place calls in the same manner as a regular business telephone.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-3 Overview Overview Optional Accessories The following are optional accessories for the IP Phones. A Power over Ethernet (PoE) inline power injector supplies 48 V power to the IP phone through t he Ethernet cable on pins 4 & 5 and 7 & 8.
IP Phone Models 1-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview The 536M module adds 36 additional softke ys to the IP phone models 53i, 55i, 57i, and 57i CT . The 536M provides paper labels for each softkey . Up to 3 modules can be piggy-backed to provide up to 108 additional so ftkeys for the phone.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-5 Overview Overview Model 53i IP Phone This section provides brief information ab out the Model 53i IP Phone. It inclu des a list of features, and desc ribes the hard keys and default programmab le keys on the 53i.
IP Phone Models 1-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview 53i Key Descriptions* Keys Key Description Goodbye key - Ends an active call. The Go odbye key also exits an open list, such as the Options List, without saving changes.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-7 Overview Overview *See the Aastra 53i User Gu ide for mo re information about each o f these keys. Navigation keys - Pressing the UP and DOWN arrow keys lets you view different st atus and text messages on the LCD display (if there is more than 1 line of status/text messages).
IP Phone Models 1-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview Model 55i IP Phone This section provides brief information ab out the Model 55i IP Phone. It inclu des a list of features, and describes the ha rd keys, default programmable keys, and default softkeys on the 55 i.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-9 Overview Overview • Inline power support (based on 802.3af standard) which elimin ates power adapters. • AC power adapter (included) • Enhanced busy lamp fields* • Set paging* *A vailability of feature de pendant on your phone syst em or service provider .
Handsfree key - Activates Handsfree for making and receiving call s without lifting the handset. When the audio mode option is set, this key is used to switch between a headset an d the handsfree speakerph one. Mute key - Mutes the microphone so that your ca ller cannot hear you (the light indicator flashes when the microph one is on mute).
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-11 Overview Overview *See the Aastra 55i User Gu ide for mo re information about each o f these keys. Soft keys - 6 Bottom keys: programmable state-based softkeys (up to 20 programmable functi ons). By default, keys 1 through 6 have no assi gned functions.
IP Phone Models 1-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview Model 57i and 57i CT IP Phone This section provides brief information ab out the Model 57i IP Phone. It inclu des a list of features, and desc ribes the hard keys and de fault softkeys on the 57 i.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-13 Overview Overview • Inline power support (based on 802.3af standard) which elimin ates power adapters. • AC power adapter (included) • Enhanced busy lamp fields* • Set paging* *A vailability of feature de pendant on your phone syst em or service provider .
IP Phone Models 1-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview Handsfree key - Activates Handsfree for making and receiving call s without lifting the handset. When the audio mode op tion is set, this key is used to switch between a headset an d the handsfree speakerph one.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-15 Overview Overview *See the Aastra 57i or 57i CT User Guide fo r more information about each of these keys.
IP Phone Models 1-16 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview 57i CT Cordless Handset Fea tures • 5 line backlit display screen • 2 multi-functional softkeys • P.
IP Phone Models 41-001160-00, Release 2.1, Rev 04 1-17 Overview Overview Function # Functio n Description 5 Softkeys Activates feature or option shown on the display above the keys 6 Call key Used to .
Firmware Installa tion Information 1-18 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview Firmware Inst allation Information Description The firmware setup and installation for.
Firmware Installa tion Information 41-001160-00, Release 2.1, Rev 04 1-19 Overview Overview Inst allation Requirements The following are general requirements for setting up and using your SIP IP phone: • SIP-based IP PBX system or networ k installed and running with a SIP account created for the 53i IP phone.
Firmware Installa tion Information 1-20 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview Configuration Server Requirement A basic requirement for setting up the IP phone is to have a configurati on server . The configuration server allows you to: • S tore the firmware images that you need to download to your IP ph one.
Firmware and Configuration Files 41-001160-00, Release 2.1, Rev 04 1-21 Overview Overview Firmware and Configuration Files Description When the IP phone is init ialized for the first time, DHCP is enabled by default.
Firmware and Configuration Files 1-22 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Overview Configuration File Precedence Aastra IP phones can accept two sources of configuration data: • The server configuration most r ecently downloaded/cached from the configuration server files, aastra.
Firmware and Configuration Files 41-001160-00, Release 2.1, Rev 04 1-23 Overview Overview Inst alling the Firmware /Configuration Files The following procedure describes how to install the firmware and configuration files. Ste p Action 1 If DHCP is disabled, manually enter the configura tion server ’s IP address.
.
41-001160-00, Release 2.1, Rev 04 2-1 Configuration Interface Methods Chapter 2 Configuration Interface Methods About this chapter Introduction This chapter describes the methods you, as an Administrator , can use to configure the IP phones.
Configuration Method s 2-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods Configuration Methods Description Y ou can use the following to setup and co.
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-3 Configuration Interface Meth ods Configuration Interface Methods Options Key The Options key allows you to access th e "Options List" on the IP phone. Accessible options in this list are for both user and Administrator use.
Configuration Method s 2-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods Using the Options Key Fro m the 53i, 55 i, or 57i/57i CT : From th e 57i CT hand set: Ste p Action 1 Press on the phone to enter the Options List.
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-5 Configuration Interface Meth ods Configuration Interface Methods Aastra Web UI An administrator can setup and co nfigure the IP phone using the Aastra W eb UI . The Aastra W eb UI supports Internet Explorer and Gecko engine-based browsers like Firefox, Mozilla or Netscape.
Configuration Method s 2-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods HTTP/HTTPS Client and Server Support The Aastra IP phones allow for HTTP re quest processing and associated data transfers to perform over a secure co nnection (HTTPS).
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-7 Configuration Interface Meth ods Configuration Interface Methods Using HTTPS via the Aast ra W eb UI HTTPS is enabled by default on the IP phones.
Configuration Method s 2-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods Accessing the Aastra W eb UI Use the following procedure to access the Aastra W eb UI. Ste p Action 1 Open your web browser and enter the phone’s IP address or host name in to the address field.
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-9 Configuration Interface Meth ods Configuration Interface Methods 2 Enter your username and password and click . Note: For an administrator , the default username is “ admin ” and the pa ssword is “ 22222 ”.
The following catego ries display in the side menu of th e Aastra W eb UI: St a t u s , Operation, Basic Settings, Advanced Settings . St at u s The St a t u s sec tion displays the network status and the MAC address of the IP phone. It also displays hardware and fi rmware information ab out the IP phon e.
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-11 Configuration Interface Meth ods Configuration Interface Methods Exp ansion Module < N> The 536M has up to 3 6 configurable ke ys.
Configuration Method s 2-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods Basic Settings The Basic Settings section provides the following options: Heading Description Preferences Allows you to set the following General specifications on the IP phone.
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-13 Configuration Interface Meth ods Configuration Interface Methods Advanced Settings The Advanced Setti ngs section provides th e following options: Heading Description Network Allows you to set Basic Ne twork Setting s, Advanced Network Settings, T ype of Service DSCP , and VLAN settings.
Configuration Method s 2-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods Enabling/Disabling the Aastra W eb UI The Aastra W eb UI is enabled by de fault on the IP phones.
Configuration Method s 41-001160-00, Release 2.1, Rev 04 2-15 Configuration Interface Meth ods Configuration Interface Methods Configuration Files ( Administrator Only ) A system administrator can enter specific parameters in the configuration files to configure the IP phones.
Configuration Method s 2-16 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuration Interface Methods Configuration files Ste p Action 1 Using a text-ba sed editing application, open the conf iguratio n file for the phone, for which you wa nt to configure the directory l ist (either aastra.
41-001160-00, Release 2.1, Rev 04 3-1 Administrator Options Chapter 3 Administrator Options About this chapter Introduction The IP phones provide speci fic options on the IP Phone that only an Administrator can access.
About this chapter 3-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Network Settings page 3-31 Line Settings page 3-56 Softkeys, Programmable Keys, Expansion .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-3 Administrator Options Administrator Options Administrator Level Options Description There are options on th e IP phone that b o th a User and Administrator can access. However , there are specific options that an Administrator ca n access only .
Administrator Level Options 3-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options The following are administrator options in the " Options List " on the IP ph one UI: • Administrator Menu — Configuration Server — Network Settings — SIP Settings — Factory Default — Erase Local Config.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-5 Administrator Options Administrator Options Simplified IP Phone UI Options Me nu An Administrator can replace the existing options menu on the Phone UI with a more simplified options menu.
Administrator Level Options 3-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Configuring the Simplified IP Phone UI Optio ns Menu Y ou can enable the si mplified IP Phone UI Options menu using the configuratio ns files only .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-7 Administrator Options Administrator Options Aastra Web UI Options An Administrator can configure specific options using the Aastra W e b UI.
Administrator Level Options 3-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options The following are options that an Admini strator can configure in the Aastra W eb.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-9 Administrator Options Administrator Options References For information about optio ns available to a User AND Administrator in the Aastra W eb UI, see your Model-spec ific User Guide .
Administrator Level Options 3-10 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Phone St atus The Phone S tatus on the IP Phone displays the network status and firmware version of the IP phone. Y ou can display phone status using the IP phone UI or the Aastra W eb UI.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-11 Administrator Options Administrator Options • IP&MAC Addresses Displays the IP address and MAC address of the phone. • LAN Port Displays the Link S tate, Negotiation Me thod, Speed, and Duplex Method that the phone uses on its LAN port.
Administrator Level Options 3-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options The following information disp lays for phon e status in the Aastra W eb UI at the location S tatus->System Information . This information is available to the user and the administrator as read-only .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-13 Administrator Options Administrator Options Rest arting Y our Phone As System Administrator , there may be times when you need to restart a phone. The Restart option allows you reboot th e phone when required.
Administrator Level Options 3-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Rest arting the Phone Using the Aastra W eb UI Aastra Web UI 1 Click on Operation->Reset->Phone. 2 Click to restart the phone.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-15 Administrator Options Administrator Options Set Phone to Factory Default s/Erase Local Configuration Y ou can set phones to their factory de fault setting or remove a local phone’ s configuration using the IP Phon e UI or the Aastra W e b UI.
Administrator Level Options 3-16 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Settings Factory Defaults Using the Aastra W eb UI Aastra Web UI Ste p Action 1 Click on Operation->Reset->Current Settin gs.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-17 Administrator Options Administrator Options Erasing the Phone’ s Local Configuration Y ou can reset the IP Phone’ s local co nfiguration if required. The local configuration is the last updated config uration you perfo rmed using the IP Phone UI or the Aastra W eb UI.
Administrator Level Options 3-18 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Erasing the Phone’ s Local Configuration Us ing the Aastra W eb UII Aastra Web UI Ste p Action 1 Click on Operation->Reset->Current Settin gs.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-19 Administrator Options Administrator Options Basic Settings An Administrator has access to specific Basic Setting options to configure and manage the IP Phone in the network.
Administrator Level Options 3-20 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Park Call Note: This option can be set by both Users and Administrato rs. sprecode The parking of a live call to a specific extension.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-21 Administrator Options Administrator Options Play Call W aiting T one Note: This option can be set by both Users and Administrato rs. call waiting tone Enable or di sables the pl aying of a call waiting tone when a caller is on an active call and a new call comes into the phone.
Administrator Level Options 3-22 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Incoming/Outgoing Intercom Calls The Incoming/Outgoing Intercom Ca ll settings on the IP Phone specify whether the IP phone or the server is respon sible for notifying the recipient that an Intercom call is being placed.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-23 Administrator Options Administrator Options Microphone Mute Note: This option can be set by both Users and Administrato rs. sip intercom mute mic Enables or disables the microphone on the IP phone for Intercom calls made by the originating caller .
Administrator Level Options 3-24 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Prefix Code sip intercom prefix code The prefix to add to the phone numb er for server-side outgoing Inte rcom calls. This parameter is required fo r all server-side Intercom calls.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-25 Administrator Options Administrator Options Key Mapping Parameter in Aastra Web UI Parameter in Configuration Fi les Descriptio n Map Redial Key T o map redial key to Sets the Redial key as a speeddial key if a value is entered for this parameter .
Administrator Level Options 3-26 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Ring T ones Priority Alerting Settings Parameter in IP Phone UI Parameter in Aastra Web UI Parameter in Configur ation Files Description T one Set Note: This option can be set by both Users and Administrato rs.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-27 Administrator Options Administrator Options External alert external When an "ale rt external" keyword app ears in the header of the INVITE re quest, the configured Bellcore ring tone is applied to the IP phone.
Administrator Level Options 3-28 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Directed Call Pickup (DCP) Parameter in Aastra Web UI Parameters in Configuration Fi les Descriptio n Directed Call Pickup directed call pickup Enables or disable s the use of "directed call pickup" feature.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-29 Administrator Options Administrator Options Auto Call Distribution (ACD) Settings T ime and Date Parameter in Aastra Web UI Parameters in Configuration Fi les Descriptio n Auto Available acd auto available Enables or disables the use of the ACD Auto-Available Ti m e r.
Administrator Level Options 3-30 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Language Parameter in Aastra Web UI Parameter in Configuration Fi les Descriptio n WebPage Language Note: This option can be set by both Users and Administrato rs.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-31 Administrator Options Administrator Options Network Settings The following paragrap hs describe the network paramete rs you can config ure on the IP phone.
Administrator Level Options 3-32 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Basic Network Settings If Dynamic Host Configuratio n Protocol (DHCP) is enabled, the IP phone automatically configures all of the Netw ork settings.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-33 Administrator Options Administrator Options Subnet Mask Subnet Ma sk subnet mask Subne t mask defines the IP address range local to the IP phone. T o assign a static subnet mask, disable DHCP .
Administrator Level Options 3-34 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Secondary DNS Secondary DNS dns2 A service that translates domain names into IP addresses. T o assign static DNS addresses, disable DHCP .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-35 Administrator Options Administrator Options Advanced Network Settings Parameter In IP Phone UI Parameter in Aastra Web UI Parameters in Configuration Fi les Descriptio n UPnP UPnP upnp manager Enables or disables Universal Plug and Play (UpnP) on th e IP phone.
Administrator Level Options 3-36 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options NA T RTP Port NA T RTP Port sip nat rtp port Indicates the port th rough which the RTP p ackets are sent. This value must specify the beginning of the RTP port range on the gateway or router .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-37 Administrator Options Administrator Options N/A NTP Time Servers t ime server disabl ed Enables or disable s the time server . This param eter af fects the time server 1 , time server2 , and time server 3 parameters.
Administrator Level Options 3-38 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options HTTPS HTTPS Serve r - Redirect HTTP to HTTPS https redirect http get Allows or disallows redire ction from the HTTP server to the HTTPS server .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-39 Administrator Options Administrator Options T ype of Service (T oS), DSCP (53i) Networks settings include T y pe of Service (T oS) and Differentiated Services Code Point (DSCP) for the 53i IP phone.
Administrator Level Options 3-40 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options VLAN Y ou can enable or disable VLAN and set specific VLAN IDs and priorities under Network Settings.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-41 Administrator Options Administrator Options SIP Priority RTP Priority RT CP P r i or i t y SIP Priority RTP Priority RTCP Priority to.
Administrator Level Options 3-42 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options PC Port Settings (Port 1) PC Port VLAN ID VLAN ID VLAN id port 1 S pecifies the VLAN ID used to pass packets through to a PC via Port 1.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-43 Administrator Options Administrator Options SIP Settings The following paragraphs describe the SIP parameters you ca n configure on the IP phone.
Administrator Level Options 3-44 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options User Name Phone Number sip user name (global) sip lineN user name (per-line) User name used in the n ame field of the SIP URI for the IP phone and for registering the phone at the registrar .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-45 Administrator Options Administrator Options N/A BLA Number sip bla number (global) sip lineN bla number (per-line) Phone number that you assign to BLA lines that i s shared across all phones (global configurati on) or shared on a pe r-line basis (p er-line configuration).
Administrator Level Options 3-46 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Basic SIP Network Settings Parameter In IP Phone UI Parameter in Aastra Web UI P.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-47 Administrator Options Administrator Options N/A Outbound Proxy Server sip outbound proxy server (global) sip lineN outbound proxy server (per-line) Address of the outbound proxy server .
Administrator Level Options 3-48 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options N/A Backup Registrar Server sip backup registrar ip (global) sip lineN backup re.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-49 Administrator Options Administrator Options Advanced SIP Settings In addition to the basic SIP settings, you can also config ure the following advanced SIP parameters. These parameters are configurable via the Aastra W eb UI and the configuration files on a global basis only .
Administrator Level Options 3-50 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Missed Call Summary Subscription Period sip missed call summary subscription period S pecifies th e amount of time, in seconds, that the phone uses the Missed Calls Summary Subscription feature.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-51 Administrator Options Administrator Options T imer 1 and T imer 2 sip T1 timer sip T2 timer The requested durati on, in seconds, before the MWI subscription times out. The phone re-subscribes to MWI before the subscr iption period ends.
Administrator Level Options 3-52 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Registration Renewal Ti m e r sip registration renewal timer The re quested durati on, in seconds, before the MWI subscription times out.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-53 Administrator Options Administrator Options Blacklist Duration sip bla cklist duration Specif ies the length of time, in seconds, that a failed server remains on the server blacklist.
Administrator Level Options 3-54 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options RTP Settings Y ou can configure the following R TP settings.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-55 Administrator Options Administrator Options N/A Customized Code c Preference List sip customized codec S pecifies a custo mized Codec preference list which allows you to use the preferred Cod ecs for this IP phone.
Administrator Level Options 3-56 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Line Settings An administrator can configure multiple lin es on the IP phone with the same SIP network configuration (g lobal) or a differ ent SIP network config uration (per -line).
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-57 Administrator Options Administrator Options Sof tkeys, Programmable Ke ys, Exp ansion Module Keys A user or administrator can assign speci fic functions to softkeys, programmab le keys, or expansion module keys.
Administrator Level Options 3-58 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Action URI The IP phones have a feature that allows an administrator to specify a uniform resource identifier (URI) that triggers a GET when certain XML events occur .
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-59 Administrator Options Administrator Options Configuration Server Settings The configuratio n server stores the firmwa re images, configuration files, and software when performing so ftware upgrades to the IP pho ne.
Administrator Level Options 3-60 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Alternate TFTP Alternate TFTP alternate tftp server The alternate TFTP server ’s IP address or qualified domain name . This will become effective after this configuration file has bee n downloaded into the phone.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-61 Administrator Options Administrator Options FTP Password FTP Password ftp p assw ord The password to enter for accessing the FTP server . This will become effective after this configuration file has bee n downloaded into the phone.
Administrator Level Options 3-62 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Download Server HTTPS Server https server The HTTPS server ’s IP address. This will become effective after this configuration file has bee n downloaded into the phone.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-63 Administrator Options Administrator Options Auto-Resync Settings N/A Mode auto resync mode Enables and disables the pho ne to be updated automatically once a day at a specific time in a 24-hour period.
Administrator Level Options 3-64 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options N/A T ime (24-hour) auto resync time Sets the time of day in a 24-hour period for the IP phone to be automatically updated. This parameter works with TFTP , FTP , and HTTP servers.
Administrator Level Options 41-001160-00, Release 2.1, Rev 04 3-65 Administrator Options Administrator Options XML Push Server List (App roved IP Addresses) N/A XML Push Server List (Approved IP Addresses) xml application post list The HTTP server that is pushing XML applications to the IP phone.
Administrator Level Options 3-66 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Administrator Options Firmware Up date Features The IP phone uses a TFTP , FTP , HTTP , or HTTPS server (depending on the protocol configu red on the IP ph one) to download co nfiguration files and firmware.
41-001160-00, Release 2.1, Rev 04 4-1 Configuring the IP Phones Chapter 4 Configuring Network and Session Initiation Protocol (SIP) Features About this chapter Introduction This chapter provides the information re quired to configure the Network and Global SIP features on the IP Phone.
About this chapter 4-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Global SIP Se ttings page 4-45 Basic SIP Settings page 4-46 Advanced SIP Settings (opt.
Overview 41-001160-00, Release 2.1, Rev 04 4-3 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Overview An administrator can configure the IP Phone Network and SIP options from the phone UI, from the Aastra W eb UI, or the configuration files.
Network Settings 4-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Network Settings This section describes the basic network settings on the IP phone which.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-5 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones • HTTP Server • HTTPS Server The network administrator chooses whic h of these parameters (if any) are supplied to the IP phone by the DHCP se rver .
Network Settings 4-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones DNS Caching The IP phones have the ability to cache DNS requests according to RFC1035 and RFC2181.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-7 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Me nu.
Network Settings 4-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Configuring Network Settings Manually If you disable DHCP on your phone, you need to c.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-9 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones • Secondary DNS Y ou can configure the network settings usin g the configuration files, the IP phone UI, or the Aastra W eb UI.
Network Settings 4-10 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->Basic Network Settings. 2 Enter an IP address of the phone in the IP Address field.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-11 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Configuring LAN and PC Port Negotiation Ethernet is the computer network ing technology for loca l area networks (LANs).
Network Settings 4-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Full-Duplex (10Mbps or 100Mbps) Full-duplex data transmission means th at data can be transmitted in both directions on a signal carrier at the sa me time.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-13 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 7 Select a negotiation method to use on port 0 and pre ss Done .
Network Settings 4-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->Basic Network Settings. 2 In the “ LAN Port ” field, select a negotiation method to use on port 0.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-15 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 3 In the “ PC Port ” field, select a negotiation method to use on port 1.
Network Settings 4-16 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Advanced Network Settings Y ou can set advanced network settings on the IP phone such a.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-17 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Nortel Proxy/Registrar The phone at IP address 10.10. 10.10 is configured to register with the proxy at 63.
Network Settings 4-18 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Nortel Networks NA T Nortel Netw orks provides a proprietary solution to support co nnectivity to their proxies from phones placed behind devices (such as routers or firewalls) that use NA T .
Network Settings 41-001160-00, Release 2.1, Rev 04 4-19 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Me nu.
Network Settings 4-20 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Network->Ad vanced Network Settings.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-21 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Configuring NA T Address and Port (optional) Y ou can also configure a specific NA T address and port on the IP phon e using the configuration files, IP Phone UI, or Aastra W eb UI.
Network Settings 4-22 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Network->Ad vanced Network Settings. 2 Enter a NA T IP addre ss in the " NA T IP " field.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-23 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones HTTPS Client/Server Configuration HTTPS is a W eb protocol that encrypts a nd decrypts user page requests as well as the pages that are returned by the W eb server .
Network Settings 4-24 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones The HTTPS server provides HTTP functio nality over secure connections.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-25 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Me nu.
Network Settings 4-26 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->Advanced Network Settings . 2 Select an HTTPS client method to use from the HTTPS Client Method field.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-27 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Universal Plug and Play (UPnP) (for remote phones) UPnP is a standard that uses Internet protocols to enable devices to be plugged into a network and automatically know about each other .
Network Settings 4-28 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Y ou can enable UPnP on remote IP phones using the configuration files, the IP Phone UI, or the Aastra W eb UI.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-29 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Me nu.
Network Settings 4-30 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->Advanced Network Settings . 2T h e “ UPnP ” field is disabled by default.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-31 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Virtua l LAN (optional) V irtual Local Area Networ.
Network Settings 4-32 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones The following parameters allow an administrator to configure T oS, QoS, and DiffServ Qo.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-33 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones DSCP Range/VLAN Priority Mapping DSCP bits in the .
Network Settings 4-34 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones The following table id entifies the defaul t DSCP of protocols. Configuring T ype of Service (T oS)/DSCP (optional) Use the following procedures to conf igure T oS/DSCP on the IP phone.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-35 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 6S e l e c t T ype of Service SIP . or Select Ty p e o f S e r v i c e R T P . or Select T ype of Service RTCP .
Network Settings 4-36 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->T ype of Service,DSCP . 2 Select a Protocol field: •“ SIP ” or •“ R T P ” or •“ R T C P ” 3 Enter a value from 0 to 63 .
Network Settings 41-001160-00, Release 2.1, Rev 04 4-37 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Configuring VLAN (optional) Use the following procedures to confi gure VLAN on the IP phone. Note: VLAN is disabled by default.
Network Settings 4-38 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones T o set VLAN ID and priori ty for LAN Port (Port 0): 13 Select Phone VLAN. 14 Select Phone VLAN ID and enter a value from 1 to 4094 to spec ify the VLAN ID for the LAN Port.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-39 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 23 Press Done to save the change. 24 Select PC Port Priority . 25 Select a PC Port VLAN priority value from 0 to 7 for the PC Port.
Network Settings 4-40 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Networ k->VLAN. T o globally enable/disable VLAN an d set priority for non-IP packets : 2 Enable VLAN by checking the VLAN Enable field check box.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-41 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones T o set VLAN ID and priority for the PC Port (Port 1 ): 6 Enter a VLAN ID value from 1 to 4095 in the VLAN ID field .
Network Settings 4-42 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Network Time Servers Network T ime Protocol (NTP) is a protocol that the IP phone uses to sy nchronize the phone clock time with a computer (configuration server) in the network.
Network Settings 41-001160-00, Release 2.1, Rev 04 4-43 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Use the following procedure to enable/d isab le and config ur e the NTP Servers using the Aastra W eb UI.
Network Settings 4-44 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 3 Enter an IP address or qualified domain name in the " Ti me Se rv e r 1 " , " Time Server 2 ", and/or " Tim e S er v er 3 " fi eld(s) to specify the location of the NTP time server .
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-45 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Global SIP Settings Description The IP phone uses the information in th e Global Session Initiation Protocol (SIP) settings to register at the IP PBX.
Global SIP Settings 4-46 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Basic SIP Settings The following tables identify the SIP gl obal and per -line, authentication and network parame ters on the IP phones .
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-47 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones SIP Per-Line Parameters Reference For more info.
Global SIP Settings 4-48 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones For example, if a parameter value is conf igured for one of the per-line sets, all p.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-49 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Backup Proxy/Registrar Support The IP phones support a backup SIP prox y and backup SIP registrar feature.
Global SIP Settings 4-50 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Y ou can configure SR V lookup using the configurat ion files ( aa stra.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-51 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Me nu.
Global SIP Settings 4-52 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 16 Select User Name to enter the us ername in the name field of the SIP URI for the IP phone, and for registering the phon e at the registrar .
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-53 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones . Aastra Web UI Ste p Action 1 For global configura tion, click on A dvanced Setting s->Global SIP->Basic SIP Settings.
Global SIP Settings 4-54 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Or , for per-line configuration, click on Advanced Settings->Line N (1-9) . T o configure SIP authentication settings: 2 In the " Screen Name " field, e nter the screen name that d isplays on the idle screen.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-55 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 3 In the " Screen Name 2 " field, enter the text you want to display on the pho ne under the “Screen Name” on the idle screen.
Global SIP Settings 4-56 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 9 In the " Line Mode " field, select "Generic" for normal mo de, "BroadSof t SCA" for a BroadWorks network, or "Nortel" fo r a Nortel network.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-57 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 21 T o enter a value in the “ Conference Server URI ” field, see Chapter 5, the section, “Centralized Conferencing (for Sylantro and Broadsoft Servers)” on pa ge 5-22 0 .
Global SIP Settings 4-58 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Advanced SIP Settings (optional) Advanced SIP Settings on the IP Phone a llow you to configure specific features on the phone.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-59 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Reference Refer to Appendix A, “Advanced SIP Settings” on page A-62 for a description of each of the above parameters.
Global SIP Settings 4-60 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones . Aastra Web UI Ste p Action For Global configuration, click on Advanced Settings->Global SIP->Advanced SIP Settings. 1 Or for per-line configuration, cli ck on Advanced Settings->Line N (1-9).
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-61 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 2 Enable the " Explicit MWI Subscription " field by checking the check box. (Disable this field by unchecking t he check box.
Global SIP Settings 4-62 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 9 In the " T ran saction Timer " field, enter the amount of time, in millisecond s, that the phone allows the call server (registrar/proxy) to re spond to SIP messages that it sends.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-63 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 16 (For Broadsoft Servers) The “ Blacklist Duration ” field is enabled by default with a valu e of 300 seconds (5 minutes).
Global SIP Settings 4-64 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Real-time T r ansport Protocol (RTP) Settings Real-time T ransport Protocol (R TP) is used as the bearer path for voice packets sent over the IP network.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-65 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones RTP Port R TP is described in RFC1889. The UDP po rt used for R TP str eams is traditionally an even-numbered port, and the R TCP control is on the next port up.
Global SIP Settings 4-66 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones All Codecs have a sampling rate o f 8, 000 samples per second, and operate and operate i n the 300 H z to 3,700 Hz audi o range.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-67 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Silsupp is used to enable or disable sile nce suppression. V oice Activity Detection (V AD) on the IP phones is used to determine whether each individual packet contains useful speech data.
Global SIP Settings 4-68 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones DTMF Method A feature on the IP phone al lows you to select the DTMF method that the phone uses to send DTMF digits from the IP ph one via INFO messages.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-69 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones If an SR TP enabled IP phone initiates a call, and the receiving ph one is also SR TP enabled, the IP Phone UI displays a “loc k” icon, indicating that the call is secure.
Global SIP Settings 4-70 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Configuring RTP Features Use the following procedures to confi gure the R TP features on the IP phone.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-71 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones . Aastra Web UI Ste p Action 1 Click on Advanced Settings-> Globa l SIP->RTP Settings. Global Setting s .
Global SIP Settings 4-72 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Click on Advanced Settings->Line <N> ->RTP Settings. Per-Line Setting s . 2 Enter an R TP Port Base in the RTP Port field. Default is 3000 .
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-73 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 5 Enter a " Customized Co dec Preferenc e List ".
Global SIP Settings 4-74 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Autodial Settings The IP phones includ e a feature calle d “A utodial”. When y ou configure Autod ial on an IP phone, the phone automatically dials a preconfigured number whenever it is of f-hook.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-75 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Configuring AutoDial Using the Configuration Fi.
Global SIP Settings 4-76 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones Configuring Autodial Using the Aastra W eb UI Use the following procedure to configur e Autodial using the Aastra W eb UI. By default, your IP phone uses the global settings you specify for Autodial for all lines on your IP phone.
Global SIP Settings 41-001160-00, Release 2.1, Rev 04 4-77 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 3 In the “Autodial Timeout” field, specify .
Global SIP Settings 4-78 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 2 Do one of the following actions: • T o allow this line to use the global autod ial settings, click on the Use Glob al Settings parameter to enable it, then click to save your changes.
Configuration Server Protocol 41-001160-00, Release 2.1, Rev 04 4-79 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Configuration Server Protocol Y ou ca.
Configuration Server Protocol 4-80 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 6 Select from the following: • Use TFTP • Use FTP • Use HTTP • Use HTTPS Default is “ Use TFTP ”.
Configuration Server Protocol 41-001160-00, Release 2.1, Rev 04 4-81 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 9 Enter the IP address of the protocol server (in dotted decimal format). Use the followin g table to configure the applicable server .
Configuration Server Protocol 4-82 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 9 (Cont’d) Referenc e : For more informa tion on configuring the HTTPS s.
Configuration Server Protocol 41-001160-00, Release 2.1, Rev 04 4-83 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones Aastra Web UI Ste p Action 1 Click on Advanced Settings->Co n figuration Server .
Configuration Server Protocol 4-84 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones 2 Select the protocol from the " Download Pro tocol " list box. V alid val ues are TFTP , FTP , HTTP , a nd HTTPS .
Configuration Server Protocol 41-001160-00, Release 2.1, Rev 04 4-85 Configuring Network and Session Initiation Protocol (SIP) Featur es Configuring the IP Phones 3 Click to save your settings. Note: The session prompts you to rest art the IP phone to appl y the configuration settings.
Configuration Server Protocol 4-86 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Configuring the IP Phones.
41-001160-00, Release 2.1, Rev 04 5-1 Operational IP Phone Features Chapter 5 Configuring Operational Features About this chapter Introduction The IP phones have specific operational features you can configure to customize your IP phone. This chapter describes each feature and provides procedures for configuring your phone to use these features.
About this chapter 5-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Call W aiting/Call W aiting T one page 5-43 S tuttered Di al T one page 5-46 XML B.
About this chapter 41-001160-00, Release 2.1, Rev 04 5-3 Configuring Operati onal Features Operational IP Phone Features XML Customized Services page 5-196 Audio Tr ansmit and Recei ve Gain Adjustment.
Operational Features 5-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Operational Features Description This section describes the operational features manage d and configured by a System Administrator .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-5 Configuring Operati onal Features Operational IP Phone Features 5 Enter the new user password. Note: The IP phones support numeric characters only in passwords. If you enter a p assword with alpha characters, the phone uses the default password instead.
Operational Features 5-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Resetting a User Password If a user forget s his password, either the u ser or an administrator can reset it so a new password can be entered.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-7 Configuring Operati onal Features Operational IP Phone Features 2 In the “ Reset User Password ” field, click . The following screen di splays: 3 In the “ Current Password ” field, leave this blank.
Operational Features 5-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Administrator Passwords An administrator can change the admini strator passwords on the phone usin g the configuration files only .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-9 Configuring Operati onal Features Operational IP Phone Features Locking/Unlocking the Phone A user or administrator can lock a pho ne to prevent it from being used or configured . Once the phone is locked, the user or ad ministrator can enter their password to unlock th e phone.
Operational Features 5-10 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Locking/Unlocking the Ph one Using the IP Phone UI Use the following IP Phone UI proced ure to lock/unlock an IP phon e and prevent it from being used or configured.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-11 Configuring Operati onal Features Operational IP Phone Features Locking/Unlocking the Ph one Using the Aastra W eb UI Use the following Aastra W eb UI procedure to lock/unlock an IP phon e and prevent it from bein g used or configured.
Operational Features 5-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuring a Lock/Unlock Key Us ing the Configuration Files Using the configuration files, you can configure a key on the phone (softkey , programmable key , or expansion module key) to us e as a lock/unlock key .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-13 Configuring Operati onal Features Operational IP Phone Features Configuring a Lock/Unlock Key using the Aastra Web UI Using the Aastra W eb UI, you can co nfigure a key on the phone (softkey , programmable key , expansion module key) to use as a lock/unlock key .
Operational Features 5-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using the Configured Lock/Unlock Key on th e IP Phone After configuring a key as a lock/unlock key , refer to the following procedure to use the key on the IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-15 Configuring Operati onal Features Operational IP Phone Features Defining an Emergency D ial Plan Public telephone networks in countries ar o.
Operational Features 5-16 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuring an Emergency Dial Plan Use the following procedures to specify the numbers to use on your phon e for dialing emer gency services in your area.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-17 Configuring Operati onal Features Operational IP Phone Features T ime and Date In addition to enabling/disabl ing the time server , you can also set the time and date, set the time and date format, set th e time zone, and set daylight savings time on the IP phones.
Operational Features 5-18 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Use the following procedures to set a tim e and date, time and date format, time zone, and daylight savings time on the IP p hones.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-19 Configuring Operati onal Features Operational IP Phone Features 13 Select a date forma t from t he list of options.
Operational Features 5-20 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->Time and Date Setting . 2 In the “T ime Format” field, select the time format you want to use on your phon e.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-21 Configuring Operati onal Features Operational IP Phone Features Language The IP phones support several dif ferent languages. Y ou can have the IP phone UI and the Aastra W eb UI displa y in a specif ic language a s required.
Operational Features 5-22 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Example The following is an example of the parameters you would enter in the <mac>.cfg file to load a French, Italian, German, and Spanish language pack to the IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-23 Configuring Operati onal Features Operational IP Phone Features Loading Language Packs via the Aastra Web UI Using the Aastra W eb UI, you can specif y a language pa ck to load using the parameters at Basic Settings->Pr efer ences->Language Settings .
Operational Features 5-24 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Spec ifying the Language to Use Once the language pack(s) have loaded, yo u must then specify which language to use on the phone. After the phone has booted up, you can sp ecify which language(s) to use.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-25 Configuring Operati onal Features Operational IP Phone Features IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Lang uage . 3S e l e c t English (English) , Français (French) , Esp añol (S panish) , Deut sch (German) , It aliano (Italian).
Operational Features 5-26 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->Language Settings.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-27 Configuring Operati onal Features Operational IP Phone Features 6 In the “ W ebp age Language ” fi eld, select a language to apply to the Aastra Web UI.
Operational Features 5-28 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Locking IP Phone Keys The IP phones allow you to lo ck or un lock prog rammable ke ys, softkeys, hard keys, cordless handset keys, and expansion k eys (for expansion modules).
Operational Features 41-001160-00, Release 2.1, Rev 04 5-29 Configuring Operati onal Features Operational IP Phone Features Locking the IP Phone Keys Use the following procedures to lock the softkeys and programmab le keys on the IP phone.
Operational Features 5-30 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Local Dial Plan A dial plan describ es the number and pattern of digits that a user dials to reach a particular tele phone number .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-31 Configuring Operati onal Features Operational IP Phone Features Dial Plan Example An example of a SIP Local Dial Plan is: [01]XXX|[2-8]XXXX|91XXXXXX XXXX|X+.
Operational Features 5-32 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Example If you enter the following dial st ring for a local dial plan: sip dial.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-33 Configuring Operati onal Features Operational IP Phone Features Configuring the SIP Local Dial Plan, Dia l Plan T erminator , and Digit T imeout Use the following procedures to confi gur e the SIP Local Dial Plan using the configuration files or the Aastra W eb UI.
Operational Features 5-34 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 4 In the " Digit Timeout (in seconds) " field, enter a timeout value. This is the length of time, in seconds, he phone waits before dialing.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-35 Configuring Operati onal Features Operational IP Phone Features Park Calls/Pick Up Parked Calls The IP phones (including the 57i CT hand set) have a park and pickup call feature that allows you to park a call and pickup a call when required.
Operational Features 5-36 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features In the Aastra W eb UI, you use the following fields at Basic Settings-> Pref.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-37 Configuring Operati onal Features Operational IP Phone Features Configuring Park /Pickup using S tatic Configuration (55i, 57i, 57i CT only) Use the following procedures to confi gur e the Park/Pickup call feature using the static configuration method.
Operational Features 5-38 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2 Enter a server val ue in the Park Call field to which incoming li ve calls will be parked.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-39 Configuring Operati onal Features Operational IP Phone Features Suppressing DTMF Playback A feature on the IP phones allows us ers and administrators to enable or disable the suppression of DTMF playback when a nu mber is dialed from the softkeys and programmable keys.
Operational Features 5-40 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2 Enable the " Suppress DT MF Playback " field by checking the check box.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-41 Configuring Operati onal Features Operational IP Phone Features Display DTMF Digit s A feature on the IP phones allows users and administrat.
Operational Features 5-42 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2 Enable the " Display DTMF Digit s " field by checking the check box.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-43 Configuring Operati onal Features Operational IP Phone Features Call W aiting/Call W ait ing T one A call waiting feature notifies the user curr ently on the phone, of a new incoming call.
Operational Features 5-44 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Call W aiting T one Y ou can also enable or disable the playing of a short “Call W aiting T one" when there is an incoming call on your ph one.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-45 Configuring Operati onal Features Operational IP Phone Features . Aastra Web UI 1 Click on Basic Settings-> Pr eferences->General. 2T h e " Call W aiting " field is enab led by default.
Operational Features 5-46 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features S tuttered Dial T one Y ou can enable or disable the playing of a stuttered dial tone when there is a message waiting on the IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-47 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2T h e " Stut tered Dial T one " field is enabled by default.
Operational Features 5-48 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features XML Beep Support The IP phones have a feature that allows you to enable or disable a beep on the phone with it receives a status message from an XML applicatio n.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-49 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2T h e “ XML Beep Support ” field is enabled by default.
Operational Features 5-50 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features S t atus Scroll Delay The IP phones have a feature that allows you to specify the time delay , in seconds, between the scrolling of each status message (includi ng XML status messages) on the phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-51 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2 In the “ S tatus Scroll Delay (seconds) ” field , enter a value, in seconds, th at each XML status message displays on the phone.
Operational Features 5-52 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Incoming Call Interrupt s Dialing Y ou can configure whether or not an incoming call interrupts an outgoing call that is dialing. The incoming call interrupts dialing parameter controls this feature.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-53 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2 Incoming Call Interru pts Dialing is disabled by default.
Operational Features 5-54 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Goodbye Key Cancels Incoming Call Y ou can configure the Goodbye ke y to drop active calls or ignore incoming calls using the “ goodbye cancels incoming call ” parameter .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-55 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2 Incoming Call Interru pts Dialing is disabled by default.
Operational Features 5-56 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features UPnP Mapping Lines (for remote phones) Universal Plug and Play (UPnP) is a stan dard that uses Internet protoc ols to enable devices to be plugged in to a network and autom atically know about eac h other .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-57 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences->General. 2T h e " UPnP Mapping Lines " field is set to 0 by default.
Operational Features 5-58 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Message W aiting Indicator Line A User or Administrator can configure the Message W aiting Indicator (MWI) to illuminate for a specific lin e or for all lines.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-59 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings-> Pr eferences->General. 2 In the “ Message W aiting Indicato r Line ” field, select a single line from 1 to 9, or select “All” for all lines.
Operational Features 5-60 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Incoming/Outgoing Intercom with Auto-Answer and Barge In The Intercom feature allow s you to press the configured Intercom button on the IP phone and then enter the number you want to call to initiate an intercom call.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-61 Configuring Operati onal Features Operational IP Phone Features Incoming Intercom Calls Y ou can configure how the phone handl es incoming intercom calls. Y ou can receive incoming intercom calls whether or not there are active calls on the phone .
Operational Features 5-62 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Allow Barge In Y ou can configure whether or not the IP ph one allows an incoming intercom call to interrupt an active call. The “ sip intercom allow barge in” parameter controls this feature.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-63 Configuring Operati onal Features Operational IP Phone Features Use the following procedures to configure Intercom calls on the IP phone.
Operational Features 5-64 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 4 If Phone-Side or Server-Side is selected, select a line from the Li ne list box for which you want the IP phone to use as its configuration on the Intercom call.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-65 Configuring Operati onal Features Operational IP Phone Features 3T h e " Microphone Mute " field is ena bled by default. The microphone is muted on the IP phone for Intercom calls made by the origin ating caller .
Operational Features 5-66 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Key Mapping There are hard keys on your phone, such as Hold, Redial, Xfer , and Conf that are configured by default for specific call-hand ling features.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-67 Configuring Operati onal Features Operational IP Phone Features Use the following procedure to enable/disable the Redial , Xfer , and Conf key s. Mapping Redial and Conf Keys as Speeddia ls Y ou can map the Redial and Confer ence keys on the IP phone to use as speeddial keys.
Operational Features 5-68 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences . 2 In the Key Mappin g section, ente r a number in the " Map Redial Key T o " field, that th e IP phone will use to speeddial when the Redial key is pressed.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-69 Configuring Operati onal Features Operational IP Phone Features Using Redial Key for “Last Num ber Redial” The IP phones have an enhanced redial user interface that allows a user to quickly redial the last number that was dialed out from the phone.
Operational Features 5-70 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Ring T ones and T one Set s Y ou can configure ring tones and ri ng tone sets on the IP phones. Ring T ones There are several distinct ring tones a user or administrator ca n select from to set on the IP phones.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-71 Configuring Operati onal Features Operational IP Phone Features Configuration Metho d Va l i d Va l u e s Default V alue Aastra Web UI Globa.
Operational Features 5-72 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Ring T one Set s In addition to ring tones, you can configure ring tone sets on a global-basis on the IP phones. Ring tone sets consist of to ne s customized for a specific country .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-73 Configuring Operati onal Features Operational IP Phone Features Configuring Ring T ones and T one Sets Use the following procedures to confi gure ring tones and tone set s on the IP phones.
Operational Features 5-74 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Prefer ences . For global con figurati on: 2 In the " Ring T ones " section, select a country from the " To n e S e t " field.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-75 Configuring Operati onal Features Operational IP Phone Features Priority Alerting Priority alerting on the IP p hones is a feature that allows incoming calls to trigger pre-defined ringing or call waiting alert tones.
Operational Features 5-76 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Sylantro Servers The ring tone keywords that can displ ay in the "Alert-In.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-77 Configuring Operati onal Features Operational IP Phone Features If you enable priority aler ting when using a Sylantro server , you can spec.
Operational Features 5-78 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Call W aiting T ones Call W aiting is a feature that tells you if a new caller is trying to contact you when you are already on the phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-79 Configuring Operati onal Features Operational IP Phone Features Configuring Priority Alerting Use the following procedures to confi gur e priority alerting on the IP phones.
Operational Features 5-80 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features For Sylantro Servers: 3 Select a ring tone pattern for each of the following fi.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-81 Configuring Operati onal Features Operational IP Phone Features Directed Call Pickup (BLF or XML Call Interception) Directed call pickup is a feature on the phon es that allows a user to intercept a call on a ringing phone wh ich is part of the same interc eption group.
Operational Features 5-82 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features BLF and XML softkeys/programmable key s monitor the states of an extension. The extension states can be one of three states: "busy", " ringing" and "idle".
Operational Features 41-001160-00, Release 2.1, Rev 04 5-83 Configuring Operati onal Features Operational IP Phone Features Y ou can enable/disable “Directe d Call Pick up” using the configuration files or the Aastra W eb UI.
Operational Features 5-84 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Enabling/Disabling Directed Call Pi ckup Use the following procedure to enable or di sable the Directed Call Pickup featu re on the IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-85 Configuring Operati onal Features Operational IP Phone Features Configuring BLF/BLF List for Direc ted Call Pickup Use the following pr ocedure to configure BLF/BL F List for Directed Call Pick up in the configuration files.
Operational Features 5-86 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Use the following procedure to configur e BLF or BLF/List for Directed Call Pickup in the Aastra W eb UI. Aastra Web UI 1 Click on Basic Settings->Preferenc es->Directed Call Pickup Setting s.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-87 Configuring Operati onal Features Operational IP Phone Features 5 Click on Operation->Softkeys and XML or Click on Operation->Progra mmable Keys or Click on Operation->Expansion Module <N>.
Operational Features 5-88 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 9 In the " Va l u e " field, enter a value to associate with the softkey or programmable key . For example, for BLF , the value is th e extension you w ant to monitor .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-89 Configuring Operati onal Features Operational IP Phone Features Configuring XML for Directed Call Pickup Use the following procedure to configur e XML for Di rected Call Pickup in the configuration files.
Operational Features 5-90 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Use the following procedure to configur e XML for Di rected Call Pickup in the Aastra W eb UI. Aastra Web UI 1 Click on Basic Settings->Preferenc es->Directed Call Pickup Setting s.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-91 Configuring Operati onal Features Operational IP Phone Features 5 Click on Operation->Softkeys and XML or Click on Operation->Progra mmable Keys or Click on Operation->Expansion Module <N>.
Operational Features 5-92 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 9 In the " Va l u e " field, enter the URI that the phone uses to display the XML application to the LCD. For example, http://65.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-93 Configuring Operati onal Features Operational IP Phone Features Sof tkeys/Programmable Keys/Fea ture Keys/Expansion Module Keys Y ou can con.
Operational Features 5-94 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features St ate-Based Sof tkeys (55i, 57i, 57i CT only) Users and administrators can configure a specific state to display when a softkey is being used.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-95 Configuring Operati onal Features Operational IP Phone Features Y ou can enable or disable the softkey st ates using the configuration files or the Aastra W eb UI. In the Aastra W eb UI, yo u disa ble a state by unchecking the box for that operational state.
Operational Features 5-96 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuration Example The following example illustrates the use of the "softkeyN stat es" parameter , and the "softkeyN type" para meter with a value of empty .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-97 Configuring Operati onal Features Operational IP Phone Features Programmable Keys (53i, 55i) The following table provides the numbe r of softkeys and pro grammable ke ys you can configure, and the number of lines available for each type of phone.
Operational Features 5-98 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Key Functions T able Softkey/ Programmable Key Function Config uration File Parameter Aastra Web UI Parameter Descrip tion None none None Indicates not setting for the key .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-99 Configuring Operati onal Features Operational IP Phone Features Auto Call Distribution (ACD) acd Auto Call Distribution (For Sylantro Servers) Indicates the key is configured for automatic call distribution (ACD).
Operational Features 5-100 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Flash (Not applicable on Expansion Modules) flash Flash Indicates the key is set to generate a flash event when it is pressed, or when a feature key is pressed on the 57i CT handset.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-101 Configuring Operati onal Features Operational IP Phone Features Callers List callers list Callers List Indicates the key is set fo r accessing the Callers List. For more information on the Callers List, see the section “Callers List” on page 174 .
Operational Features 5-102 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Reference For more information ab out key functions for y our model phone, see you r Model-specific User ’ s Guide .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-103 Configuring Operati onal Features Operational IP Phone Features Configuring Sof tkeys and Programmable Keys Use the following procedures to confi gur e the softkeys and programmable keys on the IP phone.
Operational Features 5-104 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Operation->Softkeys and XML or Click on Operation->Progra mmable Keys or Click on Operation->Expansion Module <N>.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-105 Configuring Operati onal Features Operational IP Phone Features 5 If applicable, in the " Va l u e " field, enter a value to associate with the softkey .
Operational Features 5-106 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 57i Cordless (CT) Feature Keys In addition to the softkeys on the 57i CT , this phone also has handset keys you can configure with specific features.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-107 Configuring Operati onal Features Operational IP Phone Features Feature Key Programming Guidelines The following are guidelines to use when.
Operational Features 5-108 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Handset Feature Key Functio ns Y ou can configure the features keys on th e 57i CT handset to perform specific functions using th e configur ation files or the Aastra W eb UI.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-109 Configuring Operati onal Features Operational IP Phone Features T ransfer xf er Xfer Indicates th e key is configured as a transfer key for transferring calls. For more information about the Xfer key , see your Aastra IP Phone 57i CT User ’s Guide.
Operational Features 5-110 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Reference For more information about features ke y functions for your 57i CT , see your Aastra IP P hone 57i CT User ’ s Guide .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-111 Configuring Operati onal Features Operational IP Phone Features Configuring Handset Feature Keys Y ou can program up to 15 feature keys on the 57i CT IP phone usin g the configuration files or the Aastra W eb UI .
Operational Features 5-112 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Operation->Handset Keys . 2 Select the handset key you want to program. 3 Select the function fo r that handset key from the " Key Functio n " field.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-113 Configuring Operati onal Features Operational IP Phone Features S peeddial Prefixes The normal function of the speeddial option allows you to configure a specific key on the phone to dial a n umber quickly by pressin g the configured key .
Operational Features 5-114 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Busy Lamp Field (BLF) The BLF feature on the IP phones allows a specific extension to be monitored for state changes. BLF monitors the status (b usy or idle) of extension s on the IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-115 Configuring Operati onal Features Operational IP Phone Features BLFList Setting (For use with the Br oadSoft Br oadworks Rel 13 or higher platfo rm only) The BLFList feature on the IP phones is specifically design ed to support the BroadSoft Broadworks Rel 13 Busy Lamp Field feature.
Operational Features 5-116 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Asterisk BLF Configuration Y ou can enable the BLF feature on Asteri sk to enable monitoring for specific extensions. BLF on Asterisk is possibl e through the “hint” extension parameter .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-117 Configuring Operati onal Features Operational IP Phone Features Configuring BLFs Use the following procedures to confi gur e BLF and BLFList on the IP phone.
Operational Features 5-118 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Operation->Softkeys and XML or Click on Operation->Progra mmable Keys or Click on Operation->Expansion Module <N>.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-119 Configuring Operati onal Features Operational IP Phone Features 4 For the 55i, 57i, and 57i CT sof tkeys : In the " Label " field, enter the name of the person who’s extension you a re monitoring (i f “T ype” is BLF).
Operational Features 5-120 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features BLF Subscription Period On the IP phones, you can set the time period, in seconds, that the IP phone resubscribes the BLF subscription service afte r a software/firmware upgrade or after a reboot of the IP phon e.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-121 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Advanced Settings->Glo bal SI P->Advanced SIP Settings. 2 Enter a value, in seconds, from 120 (2 min) to 3600 (1 hour) in the " BLF Subscripti on Period " field.
Operational Features 5-122 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Automatic Call Dist ribution (ACD) (for Sylantro Servers) The IP phones supp ort an Automatic Cal l Distribution (ACD) feature for Sylantro servers.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-123 Configuring Operati onal Features Operational IP Phone Features ACD Auto-A vailable Timer Whenever the IP phone user answers a call, or misses a call, the server automatically changes the phone’ s status to unavailable.
Operational Features 5-124 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuring the ACD Auto-A vailable T imer . Configuration Files T o config ure the ACD Auto-Available T imer using the configuration fi les, see Appendix A, the section, “ACD Auto-Available T i mer Settings” on page A-131.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-125 Configuring Operati onal Features Operational IP Phone Features Configuring an ACD Key Using the Aastra Web UI Use the following procedure to co nfigure an ACD softkey , programmable key , or expansion module key using the Aastra W eb UI.
Operational Features 5-126 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuring the ACD Auto-A vailable T imer Using the Aastra W eb UI Use the following procedure to configur e an ACD auto-available timer using the Aastra W eb UI.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-127 Configuring Operati onal Features Operational IP Phone Features 3 In the “Auto A vaila ble Timer” field, specify the length of time (in seconds) b efore the IP pho ne state is automatically reset to “available.
Operational Features 5-128 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using the ACD Feature on your IP Phone The ACD feature allows you to login to a p hone queue in order to rece ive distributed calls on yo ur IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-129 Configuring Operati onal Features Operational IP Phone Features This icon changes when yo u log on to the phone queue and are available to take calls. The icon changes again when you ar e busy with an active call.
Operational Features 5-130 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Logging In to a Phone Queue (55i, 5 7i, 57i CT) Use the following procedure to log into a phone queue from your Aastra IP phone. Aastra IP Phone UI Ste p Action 1 Press the ACD softkey on your IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-131 Configuring Operati onal Features Operational IP Phone Features 3 Press the Log In sof tkey .
Operational Features 5-132 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Logging In T o a Phone Queue (53i) Use the following procedure to log into a phone queu e from your Aastra IP phone. Aastra IP Phone UI Ste p Action 1 Press the ACD programmable key on your IP phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-133 Configuring Operati onal Features Operational IP Phone Features ACD Subscription Period On the IP phones, you can set the time period, in seconds, that the IP phone resubscribes the ACD subscription service after a software/firmware upgrade or after a reboot of the IP phon e.
Operational Features 5-134 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Advanced Settings->Glo bal SI P->Advanced SIP Settings. 2 Enter a value, in seconds, from 120 (2 min) to 3600 (1 hour) in the " ACD Subscription Peri od " field.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-135 Configuring Operati onal Features Operational IP Phone Features Directed Call Pickup /Group Ca ll Pickup (for Sylantro Servers) Aastra IP phon es and any attached Ex pa nsion Modu les suppor t the Directed Call Pickup (DCP) and Group Call Pickup (GCP) features.
Operational Features 5-136 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuring DCP/GCP Using the Confi guration Files (for Sylantro Servers) Use the following procedures to confi gure DCP/GCP using the configuration files.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-137 Configuring Operati onal Features Operational IP Phone Features Configuring Directed Call Pickup (DCP) Using the Aastra W eb UI (for Sylantro Servers) Use the following procedure to configure Directed Call Pickup using the Aastra W eb UI.
Operational Features 5-138 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 5 In the “V alue” field, specify the extension you want to inte rcept when you pres s this softkey . For exampl e: 2200 6 Click to save your changes.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-139 Configuring Operati onal Features Operational IP Phone Features Configuring Group Call Pickup (GCP) Using the Aa stra Web UI (for Sylantro Servers) Use the following procedur e to configure Group Call Pickup using the Aastra We b U I .
Operational Features 5-140 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using Directed Call Pickup/Grou p Call Pickup Use the following procedure for th e DCP/GCP on yo ur phone. 4 In the “Label” field, specify a name for this Directed Call Pickup softkey .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-141 Configuring Operati onal Features Operational IP Phone Features 2 If the monitored extension receives multi ple incoming calls simultaneously , the phone displays a list of incoming calls. 3 Select a call from this list using the UP and DOW N arrow keys.
Operational Features 5-142 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Do Not Disturb (DND) The IP phones have a feature you can enable called "Do not Disturb (DND). Y ou can configure DND on softkeys and pro grammable keys using the Aast ra W eb UI or the configuration files.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-143 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI 1 Click on Operation->Softkeys and XML or Click on Operation->Progra mmable Keys or Click on Operation->Expansion Module <N>.
Operational Features 5-144 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Bridged Line Ap pearance (BLA) (55i, 57i, 57i CT only) A SIP bridge line appearance (BLA) on th e IP phones allows multiple devices to share a single directory address (DA).
Operational Features 41-001160-00, Release 2.1, Rev 04 5-145 Configuring Operati onal Features Operational IP Phone Features The following table shows the number of lines that can be set to BLA for each model phone. Configuring BLA Y ou can configure BLA on a global or p er-lin e basis using the co nfiguration files or the Aastra W eb UI.
Operational Features 5-146 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Per-Line BLA Y ou configure BLA on a per-line basis in the configuration files.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-147 Configuring Operati onal Features Operational IP Phone Features For ININ Server When configuring the BLA feature on an ININ server , the va.
Operational Features 5-148 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 For global con figuration of BLA: Click on Advanced Settings->G lobal SIP->Basic SIP Authentication Settings.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-149 Configuring Operati onal Features Operational IP Phone Features For per-line configurati on of BLA: Click on Advanced Settings->Line N (1-9). In the " Line Mode " field, select the BLA option.
Operational Features 5-150 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using a BLA Line on the IP Phone If you have either a global or per -line BL A.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-151 Configuring Operati onal Features Operational IP Phone Features BLA Support for Third Party Registration BLA allows an Address Of Record (AOR) to be assigned onto dif ferent line appearances for a group of SIP user agents (IP phones).
Operational Features 5-152 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features #Alice phone number sip line2 bla number:4085582 868 sip line2 display name:Al.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-153 Configuring Operati onal Features Operational IP Phone Features Park/Pick Up Key The IP phones (including the 57i CT hand set) have a park and pickup call feature that allows you to park a call and pickup a call when required.
Operational Features 5-154 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features On 57i/57i CT On the IP phone UI, the Park/Picku p feature displays the following : • When a call comes in, and you pickup the handset, the cust om la bel that you configured for the Park softkey d isplays on the Phone UI.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-155 Configuring Operati onal Features Operational IP Phone Features Configuring Park/Pickup Key Using Configu ration Files In the configuration files, you configur e Park/Pickup u sing the key parameters.
Operational Features 5-156 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Model 53i Examples Use the following procedure to conf igure a Park/Pickup key using the configuration files.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-157 Configuring Operati onal Features Operational IP Phone Features Configuring a Park/Pickup Key Using Aastra Web UI On the 57i/57i CT , you configure a Park and/or Pick up key at Operation->Softkeys and XML .
Operational Features 5-158 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI For the 57i/57i CT : 1 Click on Operation->Softkeys and XML. 2 Pick a softkey to conf igure for Parking a call. 3 In the " Ty p e " field, select Park .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-159 Configuring Operati onal Features Operational IP Phone Features 1 1 In th e " Va l u e " field, enter the appro priate value bas ed on the server in your n etwork.
Operational Features 5-160 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features For the 53i: 1 Click on Operation->Programmab le Keys. 53i Screen 2 Pick a hard key (from keys 3 through 6) to configure for Parking a call.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-161 Configuring Operati onal Features Operational IP Phone Features 10 Click to sa ve your changes. Y ou must restart your IP pho ne for the changes to take affect. 1 1 Click on Operation->Reset .
Operational Features 5-162 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using the Park Call/Pickup Parked Call Feature Use the following procedures on the IP phones to park a call and pick up a parked call.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-163 Configuring Operati onal Features Operational IP Phone Features 5 Enter the extension number where the call was parked. 6 Press the " Pickup " softkey . If the call pick up is successful, you are connected with the parked call.
Operational Features 5-164 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Last Call Return (lcr) (For Sylantro Servers Last call return (lcr) allows an administrator or user to configure a "last call return" function on a softkey or progr ammable key .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-165 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI For the 57i/57i CT : 1 Click on Operation->Softkeys and XML. 2 Pick a softkey to configur e for Last Call Return.
Operational Features 5-166 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features For the 57i CT Handset: 1 Click on Operation->Handset Keys . 2 Pick a handset key to configure for Last Ca ll Return. 3 In the " Key Functio n " field, select lcr .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-167 Configuring Operati onal Features Operational IP Phone Features For the 53i 1 Click on Operation->Programmab le Keys. 53i Screen 2 Pick a hard key (from keys 3 through 6) to con figure for Last Call Return.
Operational Features 5-168 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Call Forwarding The call forwardi ng feature on the IP phon e allows incoming calls to be forwarded to another destination.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-169 Configuring Operati onal Features Operational IP Phone Features The following table shows the IP phone m odel and the number of lines for which you can config ure call forwarding.
Operational Features 5-170 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuration Method for Call Forwarding The method y ou use to configure call forwarding depends on t he model phone you are configuring.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-171 Configuring Operati onal Features Operational IP Phone Features 4 For 53i: In the “ Cfwd Mode ” field, enter the mode that you want to set on your phones. For 55i/57i/57i CT : In the “ Mode ” field, enter the mode that yo u want to set on your phones.
Operational Features 5-172 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Basic Settings->Call Forward. For global con figuration of call forwardi ng: 2 In the " Mode " field, select the mode you want to set on your phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-173 Configuring Operati onal Features Operational IP Phone Features 4I n t h e " Number of Rings " field, enter the number of rings you wa nt your phone to ring b efore the call is forwarded.
Operational Features 5-174 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Callers List The IP phones have a "Callers List" f eature that store the name, phone number , and incremental calls, for each ca ll received by the phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-175 Configuring Operati onal Features Operational IP Phone Features When you download the Callers List, the phone stores the callerlist.csv file to your computer in comma-separated value (CSV) format.
Operational Features 5-176 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Enabling/Disabling Callers List Y ou can enable and disable user access to the.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-177 Configuring Operati onal Features Operational IP Phone Features 5 T o sa ve a line ite m to a progra mmable key for speeddial ing, press the 3 Save key and enter the line number at the "Save to?" prompt that is already configured for speeddial ing at a programmable key .
Operational Features 5-178 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Downloading the Callers List Use the following procedure to download the Callers List using the Aast ra W eb UI. Aastra Web UI 1 Click on Operation->Directory .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-179 Configuring Operati onal Features Operational IP Phone Features Customizable Callers List and Services Keys The IP phones currently have a Callers List key (all 5i Ser ies phones) and a Services key (55i, 57i, and 57i CT).
Operational Features 5-180 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Missed Calls Indicator The IP phone has a "missed calls" indicator that increments the number of missed calls to the phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-181 Configuring Operati onal Features Operational IP Phone Features Accessing and Clearing Missed Ca lls Use the following procedure to access and clea r missed calls from the Callers List. Once you display the Callers List, the "<number> New Calls" indicator clears.
Operational Features 5-182 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Directory List The IP phones have a " Dir ectory List " feature that allows you to store fre quently used names and numbers on the phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-183 Configuring Operati onal Features Operational IP Phone Features Y ou can also sort multiple numbers a ccording to preference and perform a quick-search feature that allows you to ente r the first letter th at corresponds to a name in the Directory to find specific line items.
Operational Features 5-184 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features • Y ou can use any spreadsheet applicatio n to open the file for viewing. The following is an example of a Directory Li st in a spreadsheet application.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-185 Configuring Operati onal Features Operational IP Phone Features Enabling/Disabling Directory List Y ou can enable and disable user access t.
Operational Features 5-186 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Server to IP Phone Download Y ou can populate your IP phone Directory List with server directory files.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-187 Configuring Operati onal Features Operational IP Phone Features Server to IP Phone Download Behav ior The software that reads directory files fro m the server , loads the file’ s contents into the phone's NVRAM when the phone is booting.
Operational Features 5-188 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using the Directory List Use the following procedures to access and use the Directory Lis t.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-189 Configuring Operati onal Features Operational IP Phone Features T o edit an entry in the Directory List: 5 a At a line item in the Directory Li st, press the 3 key . Note: Use the SA VE key to scroll between the number , name and line en tries.
Operational Features 5-190 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 9 T o exit the Directory List, pre ss the DIRECTOR Y key again, the GOODBYE key , or the QUIT key (depending on your specifi c phone model).
Operational Features 41-001160-00, Release 2.1, Rev 04 5-191 Configuring Operati onal Features Operational IP Phone Features Downloading from the Server to the IP Phone Y ou can use the configuration files to download the Directory List from the configuration serve r to the IP phone.
Operational Features 5-192 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Use the following procedure to configure the download. Aastra Web UI 1 Click on Operation->Directory . 2 In the Direct ory List field, click on .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-193 Configuring Operati onal Features Operational IP Phone Features V oi cemail (55i, 57i, and 57i CT only) The V oicemail feature on the 55i, 57i and 57i CT IP phones allow you to configure lines with phone numbers so th e phone can dial out to connect to a voicemail server .
Operational Features 5-194 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Y ou can enter up to 9 V oicemail numbers asso ciated with each of the 9 lines on the phone.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-195 Configuring Operati onal Features Operational IP Phone Features Using V oicemail (57i57i CT only) Use the following procedure to access and use voicemail. IP Phone UI Ste p Action For the 57i/57i CT : 1 Press Services on the phone to display the Services menu.
Operational Features 5-196 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features XML Customized Services Extensible Markup Languag e (XML) is a markup language much like HTML. HTML was designed to display data and to focus on how data looks.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-197 Configuring Operati onal Features Operational IP Phone Features For more information ab out creating customized XML applications, see Appendix G , “Creating an XML Ap plication.
Operational Features 5-198 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Y ou can also use the following attributes/ options with the XML objects to fu.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-199 Configuring Operati onal Features Operational IP Phone Features LockIn S pecifie s whether or not the information on the LC D screen st ays displayed when other events occur (such as pressing buttons on the keypad).
Operational Features 5-200 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Enabling/Disabling a Beep for S tatus Message Displays Y ou can enable or disable a BEEP option using the S tatus Message object (AastraIPPhoneStatus), the configura tion files, or the Aastra W eb UI.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-201 Configuring Operati onal Features Operational IP Phone Features Scroll Delay Option for S tatus Messages The IP phones support a scroll delay optio n that allows you to set the time delay , in seconds, between the scrolling of each status message on the phone.
Operational Features 5-202 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features For more information abou t creating XML configura tion scripts and for XML script examples, see Appendix G , “Creating an XML Application” .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-203 Configuring Operati onal Features Operational IP Phone Features XML Push Requests In addition to initiating a request to an XML applicati on from a softkey , an HTTP server can push an XML object to the pho ne via HTTP Post.
Operational Features 5-204 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI For the 57i/57i CT : 1 Click on Operation->Softkeys and XML . 2 Select a key from keys 1 through 20. 3 In the " Ty p e " field, select XML from the list box.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-205 Configuring Operati onal Features Operational IP Phone Features 8 Click to save your changes. The XML application is app lied to the IP phone immediately . When the XML appli cation is pushed to the phone vi a an HTTP POST , a host IP address or doma in name server is required.
Operational Features 5-206 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI For the 53i 1 Click on Operation->Progra mmable Keys. 53i Screen 2 For the 53i, select a key from keys 3 through 6.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-207 Configuring Operati onal Features Operational IP Phone Features 6 Click on Advanced Settings->Con figuration Server . 7I n t h e " XML Push Server List (Approved IP Addresses) " field, enter the host IP address and/or domain name server .
Operational Features 5-208 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Using the XML Customized Service After you create, save, and configure the IP phone with an XML application, the customized service is ready for you to use.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-209 Configuring Operati onal Features Operational IP Phone Features XML Action URIs The IP phones have a feature that allows an administrator to specify a uniform resource identifier (URI) that triggers a GET when certain events occur .
Operational Features 5-210 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features The following table identif ies the configurable actio n URI parameters in the configuration files and the Aastra W eb UI. This table also identifies the variables that apply to specific parameters.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-211 Configuring Operati onal Features Operational IP Phone Features http://10.50.10.140/outgoing .pl?number=5551212 Y ou can configure this feature via the configuration files or the Aastra W eb UI.
Operational Features 5-212 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Aastra Web UI 1 Click on Advanced Settings->Action URI. 2 Enter an XML URI for a startup event in the “ Start u p ” field.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-213 Configuring Operati onal Features Operational IP Phone Features 4 Enter an XML URI for an incoming call event in the “ Inco ming Call ” field. For example: http://10.50.10.140/incoming .
Operational Features 5-214 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features XML Sof tkey URI In addition to specifying variables fo r the Action URIs, you can also specify variables in the XML softkey URIs that are bound when the key is pressed.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-215 Configuring Operati onal Features Operational IP Phone Features Configuring XML Sof tkey URIs Use the following procedures to confi gure XML Softkey URIs using the configuration files or the Aastra W eb UI.
Operational Features 5-216 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features 3 In the " Ty p e " field, select XML from the list box. 4 In the " Label " field, enter a label that displays on the IP phone for the XML softkey .
Operational Features 41-001160-00, Release 2.1, Rev 04 5-217 Configuring Operati onal Features Operational IP Phone Features Aastra Web UI For the 53i: 1 Click on Operation->Progra mmable Keys. 53i Screen 2 On the 53i, select a ke y from keys 1 through 6.
Operational Features 5-218 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Audio T ransmit and Receive Gain Adjustment s The audio gain properties for the IP ph one handset, headset, and speakerphone is adjusted to reduce side-tone and echo on the local and far -end equipment.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-219 Configuring Operati onal Features Operational IP Phone Features Configuring Audio T ransmit and Rec eive Gain Adjustment s Y ou can configure the audio transmit and ga in adjustments using the configuration files only .
Operational Features 5-220 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Centralized Conferencing (for Sy lantro and Broadsof t Servers) The IP phones include supp ort for centralized conferencing (Ad-Hoc conferencing) for Sylantro and Broads oft servers.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-221 Configuring Operati onal Features Operational IP Phone Features T o use the centra lized conferencing after it is enabled, see your Model-specific IP Phone User Guide .
Operational Features 5-222 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Configuring Centralized Conferencing Using the Aastra Web UI Use the following procedure to configur e centralized conferencing using the Aastra W eb UI.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-223 Configuring Operati onal Features Operational IP Phone Features 3 Click to save your changes.
Operational Features 5-224 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Customizing the Display Columns on the 560M Exp a nsion Module The 560M Expansion Module screen displays softkeys in column format.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-225 Configuring Operati onal Features Operational IP Phone Features T o use the 560M, press the function key for th e page you want to display to the LCD (page 1, page2, or page 3), and press the applicable softkey .
Operational Features 5-226 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Operational IP Phone Features Expansion Module 3 (3 pages) • expmod3page1left • expmod3page1rig ht • e.
Operational Features 41-001160-00, Release 2.1, Rev 04 5-227 Configuring Operati onal Features Operational IP Phone Features These settings display to the Expansio n Module as shown in the foll owing illustrations. Cuztomizing the 560M Exp ansion Module Column Display.
.
41-001160-00, Release 2.1, Rev 04 6-1 Advanced Operational Features Chapter 6 Configuring Advanced Operational Features About this chapter Introduction The IP phones have advanced operational features you can configure using the configuration files and/or the Aastra W eb UI.
About this chapter 6-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Whitelist Proxy page 6-19 T ransport Layer Security (TLS) page 6-21 Symmetric UDP .
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-3 Configuring Adva nced Operational Features Advanced Operational Features Advanced Operational Features Description This section prov.
Advanced Operational Features 6-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features T ransport Layer Security (TLS) Allows you to enable or disabl e the use of Persistent T ransport Layer Security (TLS).
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-5 Configuring Adva nced Operational Features Advanced Operational Features MAC Address/Line Nu mber in REGISTER Messages The IP phones.
Advanced Operational Features 6-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features . Aastra Web UI Ste p Action 1 Click on Advanced Settings->Glo bal SI P->Advanced SIP Setting. 2 Enable the " Send MAC Address in REGISTER Message " field by checking the check box.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-7 Configuring Adva nced Operational Features Advanced Operational Features SIP Message Sequence for Blind T ransfer The SIP message sequence for Blind T ransfer avoids the transfer target having two simultaneous calls.
Advanced Operational Features 6-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Up date Caller ID During a Call It is possible for a proxy or call serv.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-9 Configuring Adva nced Operational Features Advanced Operational Features Boot Sequence R ecovery Mode Y ou can force the IP phone into recovery mode by pressing the 1 and # keys during boot up when the logo displays.
Advanced Operational Features 6-10 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Auto-discovery Using mDNS The IP phones can perform an auto-discovery o f all servers on a network using mDNS. When the IP phone discovers a TFTP server , it is automatically configured by that TFTP server .
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-11 Configuring Adva nced Operational Features Advanced Operational Features Single Call Restriction (57i CT only) On the 57i CT , an administrator can enab le or disable a single call restriction between the 57i CT base unit and a call serve r .
Advanced Operational Features 6-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Aastra Web UI Ste p Action 1 Click on Advanced Settings-> Globa l SIP->RTP Settings. 2 Enable the " T wo Call Suppor t " field by checking the check box.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-13 Configuring Adva nced Operational Features Advanced Operational Features Missed Call Summ ary Subscription The “ Missed Call Summ.
Advanced Operational Features 6-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Configuring Missed Call Summary Subscripti on using the Configuration .
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-15 Configuring Adva nced Operational Features Advanced Operational Features Configuring Missed Call Summary Subscripti on using the Aastra W eb UI Use the following procedure to configur e the Missed Call Summary Subscription feature using the Aastra W eb UI.
Advanced Operational Features 6-16 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features 2T h e " Missed Call Summa ry Subscription " field is disabled by default. T o enable this field, check the box.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-17 Configuring Adva nced Operational Features Advanced Operational Features Blacklist Duration (Broadsoft Servers) The Blacklist Durat.
Advanced Operational Features 6-18 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Configuring a Server Blacklist Using the Aastra W eb UI Y ou use the following pr ocedure to configure Blacklist Duration using the Aastra We b U I .
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-19 Configuring Adva nced Operational Features Advanced Operational Features Whitelist Proxy T o pro tect your IP phone network, yo u can configure a “ Whitelist Proxy ” feature that screens incoming call requests received by the IP phones.
Advanced Operational Features 6-20 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Configuring Whitelist Proxy Using th e Aastra W eb UI Use the following procedure to configur e the Whitelist Proxy feature using the Aastra W eb UI.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-21 Configuring Adva nced Operational Features Advanced Operational Features T ransport Layer Security (TLS) The IP Phones su pport a transport protocol called T ransport Layer Security (TLS) and Persistent TLS .
Advanced Operational Features 6-22 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features On the IP phones, an Administrator can configure TLS and Persistent TLS on a global-basis only , using the configur ation files or the Aastra W eb UI.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-23 Configuring Adva nced Operational Features Advanced Operational Features Configuring TLS Using the Configuration Files Y ou use the.
Advanced Operational Features 6-24 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Configuring TLS Using the Aastra W eb UI T o configure TLS using the Aastra W eb UI, you must enable TLS or Persistent TLS first.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-25 Configuring Adva nced Operational Features Advanced Operational Features 4 Click on Advanced Setti ngs->TLS S upport.
Advanced Operational Features 6-26 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features 5 Enter the certificate file na mes and the private key file nam e in the appropria te fields.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-27 Configuring Adva nced Operational Features Advanced Operational Features Symmetric UDP Signaling By default, the IP phon es use symmetric UDP signa ling for outgoing UDP SIP messages.
Advanced Operational Features 6-28 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features Removing UserAgent and Server SIP Headers Currently , the phone always.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-29 Configuring Adva nced Operational Features Advanced Operational Features Multi-S t a ge Digit Collection (Bi lling Codes) Support (for Sylantro Servers) The IP Phones support Mu lti-S tage Digit Collection (billing codes) for Sylantro Servers.
Advanced Operational Features 6-30 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Advanced Operational Features For example, suppo se the IP phone user is using billing cod e 300, and dialing the external numb er 617-238-5500.
Advanced Operational Features 41-001160-00, Release 2.1, Rev 04 6-31 Configuring Adva nced Operational Features Advanced Operational Features Numbers Not Re quiring Billing Codes Billing codes are not.
.
41-001160-00, Release 2.1, Rev 04 7-1 Encryption and the IP Phone Chapter 7 Encrypted Files on the IP Phone About this chapter Introduction This chapter provides info rmation about encryption on the IP phones and provides methods an administrator can use to store encrypted files to a server .
Encrypted Files on the IP Phone 7-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Encryption and the IP Phone Encrypted Files on the IP Phone An encryption feature for the IP phone .
Encrypted Files on the IP Phone 41-001160-00, Release 2.1, Rev 04 7-3 Encrypted Files on the IP Phone Encryption and the IP Phone T o make changes to the configuration files, the System Administrator must decrypt the files, make the changes, and re-encrypt the files.
Encrypted Files on the IP Phone 7-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Encryption and the IP Phone Examples The following examples illustrate the use of the anacrypt.exe file. Example 1 Encrypt aastra.cfg into aastra .tuz using password 1234abcd: C:> anacrypt aastra.
Encrypted Files on the IP Phone 41-001160-00, Release 2.1, Rev 04 7-5 Encrypted Files on the IP Phone Encryption and the IP Phone Example 7 Use the "-v" variable to display version number . C:> anacrypt -v The encr yption tag format sup ported by this anacrypt is: T uzo v1.
.
41-001160-00, Release 2.1, Rev 04 8-1 Firmware Upgrade Chapter 8 Upgrading the Firmware About this chapter Introduction This chapter provides information abou t upgrading the IP phone firmware.
Upgrading the Firmware 8-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Firmware Upgrade Upgrading the Firmware The IP phone uses a TFTP , FTP , or H TTP server (depending on the protocol configured on the IP phone) to down load configuration files and firmware.
Upgrading the Firmware 41-001160-00, Release 2.1, Rev 04 8-3 Upgradi ng the Firmwa re Firmware Upgrade Aastra Web UI Ste p Action 1 Click on Advanced Settings->Firm ware Up date. 2 Enter the TFTP server IP address or qualified domain name i n the " TFTP Server IP " field.
Upgrading the Firmware 8-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Firmware Upgrade Manual Firmware and Configuration File Up date Restarting the phone forces the phon e to check for both firmware and configuration files stored on the configuration server .
Upgrading the Firmware 41-001160-00, Release 2.1, Rev 04 8-5 Upgradi ng the Firmwa re Firmware Upgrade Rest arting the Phone Using the Aastra W eb UI Aastra Web UI 1 Click on Operation->Reset->Phone.
Upgrading the Firmware 8-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Firmware Upgrade Automatic Up date (auto-resync) The auto-resync feature on the IP phones a llows an administrator to enable the phone to be updated au tomatically once a day at a specific time in a 24-hour period if the files on the server have ch anged.
Upgrading the Firmware 41-001160-00, Release 2.1, Rev 04 8-7 Upgradi ng the Firmwa re Firmware Upgrade Configuring Automatic Up date Use the following procedures to confi gure automatic updat e of the IP phone firmware, configuration files, or both. Notes: 1.
Upgrading the Firmware 8-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Firmware Upgrade Aastra Web UI Ste p Action 1 Click on Advanced Settings->Configu ra tion Server->Auto-Resync. 2 Select the auto-resync mode from the Mode field.
Upgrading the Firmware 41-001160-00, Release 2.1, Rev 04 8-9 Upgradi ng the Firmwa re Firmware Upgrade Reference For more information about setting automatic update on the IP phone, see the "auto resync mode" and "auto resync tim e" parameters, see Appendix A, the section, “Configuration Server Settings” on page A-13 .
.
About this chapter 41-001160-00, Release 2.1, Rev 04 9-1 T roubleshooting T roubleshooting Chapter 9 T roubleshooting About this chapter Introduction This chapter describes tasks that a system administrator can perform on the IP phones for troublesho oting purposes.
Troubleshooting 9-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting T roubleshooting This section describes tasks that a system administrator can perform on the IP phones for troublesho oting purposes.
Troubleshooting 41-001160-00, Release 2.1, Rev 04 9-3 T roubleshooting T roubleshooting In the Aa stra W eb UI , you use the following parameters to confi gure log settings: • Log IP - The IP address for which to sa ve log files fo r troubleshooting purposes.
Troubleshooting 9-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting In the configuration files and the Aastra W eb UI, you can enable or disable each module by setting the values of 1 (enable) or 0 (disable).
Troubleshooting 41-001160-00, Release 2.1, Rev 04 9-5 T roubleshooting T roubleshooting Aastra Web UI Ste p Action 1 Click on Advanced Settings->T roubleshooting . T o set log setting s: 2 In the " Log IP " field, enter the IP address of wh ere you want log files to be stored.
Troubleshooting 9-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting Reference For information that describ es solutions to most common problems using the IP phones, see the next section, “T roubleshooting Solutions” on page 9-7 .
Troubleshooting Solutions 41-001160-00, Release 2.1, Rev 04 9-7 T roubleshooting T roubleshooting T roubleshooting Solutions Description This section describes solutio ns to some most common problems that can occur while using the IP phones.
Troubleshooting Solutions 9-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting Please ensure that the TFTP server is ru nning and accessible on the network. If the firmware file is correctly located on the running TFTP server , the phone will locate the file and reload the applicatio n onto the phone.
Troubleshooting Solutions 41-001160-00, Release 2.1, Rev 04 9-9 T roubleshooting T roubleshooting Reason : Neither of the <mac>.tuz and aastra.tuz files are present on the configuration server (TFTP/FTP/HTTP). Fix : Create the encrypted files using anac rypt.
Troubleshooting Solutions 9-10 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting How do I rest art the IP phone? IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Restart Phone . 3 For 53i: Press # to confirm.
Troubleshooting Solutions 41-001160-00, Release 2.1, Rev 04 9-11 T roubleshooting T roubleshooting How do I set the IP phone to factory default? IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Menu and enter your Administra tor Password (default is 22222 ).
Troubleshooting Solutions 9-12 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting How do I erase the phone’ s local configuration? IP Phone UI Ste p Action 1 Press on the phone to enter the Options List. 2S e l e c t Administrator Menu and enter your Administra tor Password (default is 22222 ).
Troubleshooting Solutions 41-001160-00, Release 2.1, Rev 04 9-13 T roubleshooting T roubleshooting How to reset a user ’s p a ssword? IP Phone UI 1 Press on the phone to enter the Options List. 2S e l e c t User Password . 3 Enter the current use r password.
Troubleshooting Solutions 9-14 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide T roubleshooting How do I lock and unlock the phone? IP Phone UI Ste p Action Lock the phone: 1 Press on the phone to enter the Options List. 2S e l e c t Phone Lock.
Troubleshooting Solutions 41-001160-00, Release 2.1, Rev 04 9-15 T roubleshooting T roubleshooting Aastra Web UI 1 Click on Operation->Phone Lock . Lock the phone: 2 In the “ Lock the Phone? ” field, click . The phone locks dyanamica lly and displays the following message: “ Phone is locked ”.
.
About this appendix 41-001160-00, Release 2.1, Rev 04 A-1 Configuration Parame ters Appendix A Appendix A Configuration Parameters About this appendix Introduction This appendix describes the parameters yo u can set in the conf iguration files for the IP phones.
About this appendix A-2 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A T ime Server Settings page A-31 T ime and Date Settings page A-33 SIP Local Dial Plan Settings page A.
About this appendix 41-001160-00, Release 2.1, Rev 04 A-3 Configuration Parame ters Appendix A Intercom, Auto-Answer , and Barge In Settings page A-121 Audio T ransmit and Recei ve Gain Adjustment Set.
Setting Parameters in Configuration Files A-4 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Setting Parameters in Configuration Files Y ou can set specific configuration parameters in the configuration files for configuring yo u IP phone.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-5 Configuration Parame ters Appendix A Operational, Basic, and Advanced Parameters The following sections provide the config uration parameters you can configure o n the IP phone .
Operational, Basic, and Advanced Parameters A-6 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Network Settings Parameter – dhcp DHCP (in Web UI) IP phone UI Options->Administrator Menu-> Network Sett ings Aastra Web UI Advanced Settings->Network-> Basic Network Settings Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-7 Configuration Parame ters Appendix A Parameter – subnet mask Subnet Mask (in Web UI) IP phone UI Opt ions->Admin istrator Menu -> Network Settings Aastra Web UI Advanced Settings->Network-> Basic Network Settings Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-8 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – dns2 Secondary DNS (in Web UI) IP phone UI Options->Administrator Menu-> Network Settings Aastra Web UI Advanced Settings->Netw ork-> Basic Network Settings Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-9 Configuration Parame ters Appendix A Password Settings Parameter – ethernet port 1 PC Port (in Web UI) IP phone UI O.
Operational, Basic, and Advanced Parameters A-10 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – user password Current Password (in Web UI) IP phone UI Options->User Password Aastra Web UI Operation->Use r Password Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-11 Configuration Parame ters Appendix A Emergency Dial Plan Settings Parameter – emergency dial plan Configuration Files aa stra.
Operational, Basic, and Advanced Parameters A-12 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Aastra Web UI Settings Parameter – options password enabled Configuration Fil es aastra.cfg, <mac>.cfg Description Enables or disables password protection of the Options key on the IP phone.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-13 Configuration Parame ters Appendix A Configuration Server Settings Parameter – download protocol Download Protoco l.
Operational, Basic, and Advanced Parameters A-14 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – alternate tf tp server Alternate TFTP (in Web UI) IP phone UI.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-15 Configuration Parame ters Appendix A Parameter – ftp server FTP Server (in Web UI) IP phone UI Options-> Admini strator Menu-> Network Settings->FTP Server Aastra Web UI Advanced Settings->Configuration Server Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-16 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – ftp p assword FTP Password (in Web UI) IP phone UI Options->Administrator Menu-> Network Settings->FTP Server Aastra Web UI Advan ced Settings->Configuration Server Configur ation Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-17 Configuration Parame ters Appendix A Parameter – https server HTTPS Server (in Web UI) IP phone UI Options->Admi.
Operational, Basic, and Advanced Parameters A-18 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – auto resync mode Mode (in Web UI) Aastra Web UI Advanced Settings-> Configuration Serve r-> Auto-Resync Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-19 Configuration Parame ters Appendix A Parameter – auto resync time Time (24-hour) (in Web UI) Aastra Web UI Advanced Settings-> Configuration Serve r-> Auto-Resync Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-20 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Network Address T ranslation (NA T) Settings Parameter – sip nat ip NA T IP (in Web UI) IP phone UI Options->Administrato r Menu->SIP Settings Aastra Web UI Advanced Settings->Netw ork Configuration Files aa stra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-21 Configuration Parame ters Appendix A Parameter – sip nat rtp port NA T R TP Port (in Phone UI and Web UI) IP Phone .
Operational, Basic, and Advanced Parameters A-22 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip nortel nat timer Nortel NA T Timer (in Web UI) Aastra Web UI Advanced Settings->Network Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-23 Configuration Parame ters Appendix A HTTPS Client and Server Sett ings Parameter – https client method HTTPS Client.
Operational, Basic, and Advanced Parameters A-24 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – https block http post xml HTTPS Server - Block XML HTTP POST .
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-25 Configuration Parame ters Appendix A UPnP Settings Parameter – upnp manager UPnP (in Web UI) IP phone UI Options-&g.
Operational, Basic, and Advanced Parameters A-26 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A V irtual Local Area Network (VLAN) Settings Global Parameters Parameter – upnp mapping line s UPnP Mapping Lines (in Web UI) Aastra Web UI Basic Settings->Pr eferences->General Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-27 Configuration Parame ters Appendix A LAN Port (Ethernet Port 0) Parameters Parameter – priority non-ip Priority , N.
Operational, Basic, and Advanced Parameters A-28 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A The following table identif ies the d efault DSCP-to-priority mapping structure.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-29 Configuration Parame ters Appendix A PC Port (Ethernet Port 1) Parameters Parameter – vlan id port 1 VLAN ID (for P.
Operational, Basic, and Advanced Parameters A-30 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A T ype of Service (T oS)/DSCP Settings Parameter – tos sip SIP (in Web UI).
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-31 Configuration Parame ters Appendix A T ime Server Settings Parameter – time serve r disabled NTP Time Servers (in Web UI) Aastra Web UI Advanced Settings->Network-> Advanced Network Settings Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters A-32 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – time s erver 2 Time Server 2 (in Web UI) Aastra Web UI Advanced Settings->Network-> Advanced Network Setting s Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-33 Configuration Parame ters Appendix A T ime and Date Settings Parameter – time format Time Format (in Phone UI) I P phone UI Options->Time and Date->T ime Format Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-34 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – dst config Daylight Savings (in Phone UI) IP phone UI Options->Time and Date->Daylight Savings Configur ation Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-35 Configuration Parame ters Appendix A T ime Zone Name/T ime Zone Code T able Ti me Zone Name T ime Zone Code AD-Andorr.
Operational, Basic, and Advanced Parameters A-36 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A CA-Newfoundland CA-Atlantic CA-Eastern CA-Saskatchewan CA-Central CA-Mounta.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-37 Configuration Parame ters Appendix A HK-Hong Kong HN-T egu cigalpa HR-Zagreb HT -Port-au-Prince HU-Budapest HKS CST C.
Operational, Basic, and Advanced Parameters A-38 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A P A-Panama PE-Lima PL-W arsaw PR-Puerto Rico PT -Lisbon PT -Madeira PT -Azo.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-39 Configuration Parame ters Appendix A SIP Local Dial Plan Settings ) V A- V at ican CE T YU-Belgrade CET Parameter – sip dial plan Local Dial Plan (in Web UI) Aastra Web UI Basic Settings->Preferences Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-40 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip dial plan terminator Send Dial Plan T erminato r (in Web UI) Aastra Web UI Basic Settings->Preferences Configura tion File s aast ra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-41 Configuration Parame ters Appendix A SIP Basic, Global Settings SIP Global Authentication Settings Parameter – sip .
Operational, Basic, and Advanced Parameters A-42 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip user name Phone Number (in Web UI) IP Phone UI Options->A dministrator Menu->SIP Settings Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Settings Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-43 Configuration Parame ters Appendix A Parameter – sip auth name Authentication Name (in Web UI) IP Phone UI Options->Administrator Me nu->>SIP Settings Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Settings Configurat ion Files aa stra.
Operational, Basic, and Advanced Parameters A-44 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip bla number BLA Number (in Web UI) Aastra Web UI Advanced Settings->Gl obal SIP-> Basic SIP Settings Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-45 Configuration Parame ters Appendix A SIP Global Network Settings. Parameter – sip proxy ip Proxy Server (in Web UI).
Operational, Basic, and Advanced Parameters A-46 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip backup proxy ip Backup Proxy Server (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-47 Configuration Parame ters Appendix A Parameter – sip outbound proxy port outbound proxy port (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters A-48 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip registrar port Registrar Port (in Web UI) IP Phone UI Options->Admi nistrato r Menu->SIP Settings Aastra Web UI Advanced Settings ->Global SIP-> Basic SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-49 Configuration Parame ters Appendix A Parameter – sip backup registrar port Backup Registrar Port (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-50 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A SIP Basic, Per-Line Settings The following parameters are SIP per-line settings. The value of " N " is 1 - 9 for 53i, 55i, 57i, an d 57i CT .
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-51 Configuration Parame ters Appendix A Parameter – sip lineN user name Phone Number (in Web UI) Aastra Web UI Advanced Settings->Line 1 thru 9 Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters A-52 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip lineN auth name Authentication Name (in Web UI) Aastra Web UI Advan ced Settings->Line 1 thru 9 Configur ation Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-53 Configuration Parame ters Appendix A Parameter – sip lineN bla number BLA Number (in Web UI) Aastra Web UI Advan ced Settings->Line 1 thru 9 Configuration Fil es aa stra.
Operational, Basic, and Advanced Parameters A-54 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip lineN mode Line Mode (in Web UI) Aastra Web UI Advanced Settings->Lin e 1 thru 9 Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-55 Configuration Parame ters Appendix A SIP Per-Line Network Settings. Parameter – sip lineN proxy ip Proxy Server (in Web UI) Aastra Web UI Advanced Settings->L ine 1 thru 9 Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters A-56 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip linex backup proxy ip Backup Proxy Server (in Web UI) Aastra Web UI Advanced Settings->Line 1 thru 9 Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-57 Configuration Parame ters Appendix A Parameter – sip lineN outbound proxy port Outbound Proxy Port (in Web UI) Aastra Web UI Advance d Settings->Line 1 thru 9 Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters A-58 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip lineN registrar port Registrar Port (in Web UI) Aastra Web UI Advanced Setti ngs->Line 1 thru 9 Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-59 Configuration Parame ters Appendix A Parameter – sip linex backup registrar po rt Backup Registrar Port (in Web UI) Aastra Web UI Advanced Settings->Line N -> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-60 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Centralized Conferencing Settings Global Settings Parameter – sip central.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-61 Configuration Parame ters Appendix A Per-Line Settings Parameter – sip lineN centralized conf Conference Server URI (in Web UI) Aastra Web UI Advanced->Lin e <1 thru 9> -> Basic SIP Network Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-62 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Advanced SIP Settings Parameter – sip explicit mwi subscription Explicit MWI Subscription (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-63 Configuration Parame ters Appendix A . Parameter – sip send mac Send MAC Address in REGISTER Message (in Web UI) Aastra Web UI: Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aa stra.
Operational, Basic, and Advanced Parameters A-64 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip session timer Session Timer (in Web UI) Aastra Web UI Advanced Settings->Gl obal SIP-> Advanced SIP Settings Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-65 Configuration Parame ters Appendix A Parameter – sip T2 timer T2 Timer (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-66 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip transport protocol T ransport Protocol (in Web UI) Aastra Web UI Advanced Setting s ->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-67 Configuration Parame ters Appendix A Parameter – sip registration retry time r Registra tion Faile d Retry Time r (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-68 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip registration renewa l timer Registration Renewal Timer (in Web UI) Aastra Web UI Advanced Settings->Global SIP-> Advanced SIP Settings Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-69 Configuration Parame ters Appendix A Parameter – sip acd subscription period ACD Subscription Period (in Web UI) Aastra Web UI Advanced Settings->Global SIP ->Advanced SIP Settings Configurat ion Files aastra.
Operational, Basic, and Advanced Parameters A-70 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Missed Call Summary Subscription Settings Global Parameters Parameter – s.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-71 Configuration Parame ters Appendix A Per-Line Parameter Parameter – sip missed call summary subscription period Mis.
Operational, Basic, and Advanced Parameters A-72 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A T ransport Layer Security (TLS) Settings Parameter – sip transport protocol T ransport Protocol (in Web UI) Aastra Web UI Advanced Setting s ->Global SIP-> Advanced SIP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-73 Configuration Parame ters Appendix A Parameter – sips persistent tls Configuratio n Files aastra.cfg , <mac>.cf g Description Enables or disables the use o f Persis tent T ransport Layer Security (TLS).
Operational, Basic, and Advanced Parameters A-74 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sips root and intermediate certificates Root and Intermediate Certificates (in Web UI) Aastra Web UI Advanced Settings->TLS Suppo rt Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-75 Configuration Parame ters Appendix A Parameter – sips local certificate Local Ce rtific ate (in Web UI) Aastra Web UI Advanced Settings->TLS Suppo rt Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters A-76 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sips trusted certificates T rusted Certificates (in Web UI) Aastra Web UI Advanced Settings->TLS Suppo rt Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-77 Configuration Parame ters Appendix A RTP , Codec, DTMF Global Settings Global Settings Parameter – sip rtp po rt RT.
Operational, Basic, and Advanced Parameters A-78 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip out-of-band dtmf Force RFC28 33 Out-of-Band DTMF (in Web UI) Aastra Web UI Advanc ed Settings->Global SIP->RTP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-79 Configuration Parame ters Appendix A Parameter – sip dtmf method DTMF Method (in Web UI) Aastra Web UI Advanced Settings->Global SIP->R TP Settings Configuratio n Files aastra.
Operational, Basic, and Advanced Parameters A-80 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Per-Line Settings Parameter – sip silence suppression Silence Suppression (in Web UI) Aastra Web UI Advanced Settings->Global SIP->RTP Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-81 Configuration Parame ters Appendix A Autodial Settings Global Settings Parameter – sip lineN srtp mode Aastra Web UI Advanced Setting s->Line < 1-9>->R TP Settin gs Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-82 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip autodial timeout Autodial Timeout (in Web UI) Aastra Web UI Advanced Settin gs>Global SIP> Autodial Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-83 Configuration Parame ters Appendix A Per-Line Settings Parameter – sip lineN autodial numb er Autodial Number (in Web UI) Aastra Web UI Advanced Settin gs>LineN>Autodial Settings Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-84 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A V oi cemail Settings Parameter – sip lineN vmail Note: The value of " N " is 1 - 9 for 53i, 55i, 57i, 57i CT . Configur ation Files aa stra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-85 Configuration Parame ters Appendix A Directory Settings Parameter – directory 1 Directory List (in Web UI) Aastra Web UI Operation->Direc tory Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-86 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Callers List Settings Customize Callers List and Services Key Parameter – callers list disabled Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-87 Configuration Parame ters Appendix A Call Forward Settings Parameter – call forward disabled Configuration Fi les aastra.cfg, <mac>.cfg Description Enables or disabl es the ability to configure Ca ll Forwarding.
Operational, Basic, and Advanced Parameters A-88 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Missed Calls Indicator Settings Parameter – missed calls indicator disabled Configuration Fil es aastra.cfg, <mac>.cfg Description Enables or disables the Mi ssed Calls Indicator .
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-89 Configuration Parame ters Appendix A XML Settings Parameter – xml get timeout Configuration Fil es aa stra.
Operational, Basic, and Advanced Parameters A-90 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – xml application title XML Application Title (in Web UI) Aastra Web UI Operation->Softkeys and XML->Services Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-91 Configuration Parame ters Appendix A Parameter – xml beep no tifica tion XML Beep Support (in Web UI) Aastra Web UI Basic Setting s->Preference s Configuration Fi les aastr a.
Operational, Basic, and Advanced Parameters A-92 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Action URI Settings Parameter – action uri startup Sta r t u p (in Web UI) Aastra Web UI Advanced Settings->Acti on URI Configura tion File s aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-93 Configuration Parame ters Appendix A Parameter – action uri incoming Incoming Call (in Web UI) Aastra Web UI Advanced Settings->Action URI Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-94 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Ring T one and T o ne Set Global Settings Parameter – action uri offhook Offhook (in Web UI) Aastra Web UI Advanced Settings->Action URI Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-95 Configuration Parame ters Appendix A Range Aastra Web UI & IP Phone UI To n e 1 To n e 2 To n e 3 To n e 4 To n e.
Operational, Basic, and Advanced Parameters A-96 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – tone set T one Set (in Web UI) IP Phone UI Options->T ones->T one Set Aastra Web UI: Basic Settings->Preferences->Ring T ones Configuration Fil es aa stra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-97 Configuration Parame ters Appendix A Ring T one Per-Line Settings Parameter – lineN ring tone Line N (in Web UI) Aastra Web UI: Ba sic Settings->Preferences->Rin g T o nes Configuration Files aastra.
Operational, Basic, and Advanced Parameters A-98 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Incoming Call Interrupt s Dialing Setting Parameter – incoming call inte rrupts dialing Incoming Call Interrupts Dialing (in Web UI) Aastra Web UI: Basic Settings->Pr efere nces->General Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-99 Configuration Parame ters Appendix A Goodbye Key Cancels Incoming Call Parameter – goodbye cancels incoming call Goodbye Key Cancels Incoming Call (in Web UI) Aastra Web UI: Basic Settings->Pr efere nces->General Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-100 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A S tuttered Dial T one Setting Parameter – stutter disabled S tuttered Dial T one (in Web UI) Aastra Web UI: Basic Settings->Pr efere nces->General Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-101 Configuration Parame ters Appendix A Call W aiting Settings Parameter – call waiting Call Waiting (in Web UI) Aastra Web UI Basic Settings->Preferences->Ge neral Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters A-102 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Message W aiting Indicator Settings Parameter – call waiting tone Play Call Waiting T one (in Web UI) Aastra Web UI: Basic Settings-> Preferences->General Configuration Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-103 Configuration Parame ters Appendix A Priority Alert Settings For Sylantro Server only Parameter – priority alertin.
Operational, Basic, and Advanced Parameters A-104 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – alert community 1 community-1 (in Web UI) Aastra Web UI: Basic Setting s->Preferences-> Priority Alerting Settings Configuration Fi les aastr a.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-105 Configuration Parame ters Appendix A Parameter – alert community 3 community-3 (in Web UI) Aastra Web UI: Basic Setting s->Preferences-> Priority Alerting Settings Configuration Fi les aastr a.
Operational, Basic, and Advanced Parameters A-106 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – alert external alert external (in Web UI) Aastra Web UI: Basic Settings->Preferences-> Priority Alerting Setti ngs Configuration Fil es aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-107 Configuration Parame ters Appendix A Parameter – alert group Group (in Web UI) Aastra Web UI: Basic Setting s->Preferences-> Priority Alerting Settings Configuration Fi les aastr a.
Operational, Basic, and Advanced Parameters A-108 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – alert priority alert priority (in Web UI) Aastra Web UI: Basic Settings-> Preferences-> Priority Alerting Settings Configuration Files aa stra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-109 Configuration Parame ters Appendix A Language Settings Parameter – language Webp age Language (in Web UI) IP Phone UI Options->Language Aastra Web UI Basic Settings-> Preferences-> Language Settings->Webpage Language Configuration Fi le aastra.
Operational, Basic, and Advanced Parameters A-110 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Language Pack Settings Parameter – language N Language N (in Web UI) Where “N” can be 1, 2, 3, or 4 Aastra Web UI Basic Settings-> Preferences-> Language Settings Configuration Fi le <mac>.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-111 Configuration Parame ters Appendix A The following table identifies the language code to use fo r the IP phone lan guage packs. Language Codes (from S t andard ISO 639) The following table identifies the country codes to use for the IP phone language packs.
Operational, Basic, and Advanced Parameters A-112 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A BAHAMAS BAHRAIN BANGLADESH BARBADOS BELARUS BELGIUM BELIZE BENIN BERMUDA B.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-113 Configuration Parame ters Appendix A DENMARK DJIBOUTI DOMINICA DOMINICAN REPUBLIC DK DJ DM DO ECUADOR EGYPT EL SAL V.
Operational, Basic, and Advanced Parameters A-114 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A ICELAND INDIA INDONESIA IRAN, ISL AMIC REPUBLIC OF IRAQ IRELAND ISLE OF MA.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-115 Configuration Parame ters Appendix A MACAO MACEDONIA, THE FORMER YUGOSLA V REPUBLIC OF MADAGASCAR MALA WI MALA YSIA .
Operational, Basic, and Advanced Parameters A-116 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A P AKIST AN PA L A U P ALESTINIAN TERRIT ORY , OCCUPIED PA N A M A P APUA N.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-117 Configuration Parame ters Appendix A SAINT HELENA SAINT KITTS AND NEVIS SAINT LUCIA SAINT PIERRE AND MIQUELON SAINT .
Operational, Basic, and Advanced Parameters A-118 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A UGANDA UKRAINE UNITED ARAB EMIRA TES UNITED KINGDOM UNITED ST A TES UNITED.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-119 Configuration Parame ters Appendix A Suppress DTMF Playback Setting Parameter – suppress dtmf playback Suppress DTMF Playba ck (in Web UI) Aastra Web UI Basic Settings-> Preferences Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-120 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Display DTMF Digit s Setting Parameter – display dt mf digits Display DTMF Digits (in Web UI) Aastra Web UI Basic Settings ->Preferences->General Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-121 Configuration Parame ters Appendix A Intercom, Auto-Answer , and Barge In Settings Outgoing Intercom Settings Parame.
Operational, Basic, and Advanced Parameters A-122 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip intercom prefix code Prefix Code (in Web UI) Aastra Web UI Basic Settings->Preferences-> Outgoing Intercom Settin gs Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-123 Configuration Parame ters Appendix A Incoming Intercom Settings Parameter – sip allow auto answer Auto-Answer (in Web UI) Aastra Web UI Basic Settings->Preferences-> Incoming Intercom Settings Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters A-124 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – sip play warnin g tone Play W arning T one (in Web UI) Aastra Web UI Basic Settings->Preference s-> Incoming Inte rcom Settings Configurat ion Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-125 Configuration Parame ters Appendix A Audio T r ansmit and Receive Gain Adjustment Settings Parameter – headset tx gain Configuration Fi les aastra.
Operational, Basic, and Advanced Parameters A-126 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – handset tx gain Configuration Fil es aastra.cfg, <mac>.cfg Description This is the increased (+db) or decreased (-db) amount of signal transmitted from the handset microphone to the far-end party .
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-127 Configuration Parame ters Appendix A Parameter – handsfree tx gain Config uration Fil es aastra.cfg, <mac>.cfg Description This is the increase d (+db) or decreased (-db) amount of signa l transmitted from the base microphone to the far-end party .
Operational, Basic, and Advanced Parameters A-128 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Directed Call Pickup (BLF or XML Call Interception) Settings Parameter –.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-129 Configuration Parame ters Appendix A Parameter – directed call pickup prefix Directed Call Pickup by Prefix (in Web UI) Aastra Web UI Basic Settings-> Preferences-> Directed Call Pickup Settings Configuration Fil es aa stra.
Operational, Basic, and Advanced Parameters A-130 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – play a ring sp lash Play a Ring Splash (in Web UI) Aastra Web UI Basic Settings->Preferences ->Directed Call Pickup Settings Configurat ion Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-131 Configuration Parame ters Appendix A ACD Auto-A vailable Timer Settings Parameter – acd auto available Auto Available (in Web UI) Aastra Web UI Basic Settings->Preferences ->Auto Call Distribution Settings Config uration Fil es aastra.
Operational, Basic, and Advanced Parameters A-132 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Park and Pickup Global Sett ings (57i/57i CT o nly) Parameter – sprecode Park Call (in Web UI) Aastra Web UI Basic Settings->Preferences Configurat ion Files aastra.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-133 Configuration Parame ters Appendix A Mapping Key Parameters This section provides the hard key settings you can use to enable and disable the Redial, Conf, an d Xfer keys on th e IP phone.
Operational, Basic, and Advanced Parameters A-134 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – call transfer disabled Config uration Fil es aastra.cfg, <mac>.cfg Description Enables or disable s the Xfer key on the IP phone.
Operational, Basic, and Advanced Parameters 41-001160-00, Release 2.1, Rev 04 A-135 Configuration Parame ters Appendix A Parameter – map conf key to Map Conf Key T o (in Web UI) Aastra Web UI Basic Settings->Preferences->Key Ma pping Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-136 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Sof tkey/Programmable Key/Feature Key/ Exp ansi.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-137 Configuration Parame ters Appendix A Sof tkey Settings for 55i, 57i, 57i CT The value of " N " for the following parameters is depen dent on the number of softkeys available on the55i, 57 i, and 57i CT models.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-138 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A • flash - Indicates the softkey and/o r programmable key is set to generate a flash event when it is pr essed on the 57i and 57 i CT , or a feature key is pressed on the 57i CT handset.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-139 Configuration Parame ters Appendix A Range none line speeddial dnd ("do not disturb&.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-140 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – softkeyN label Label (in Web UI) Aastra Web UI Operation->Softkeys and XML Configuration Files aast ra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-141 Configuration Parame ters Appendix A Parameter – softkeyN value Va l u e (In WEb UI) Aastra Web UI Operation ->Softkeys and XML Configuratio n Files aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-142 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – softkeyN line Line (in Web UI) Aastra Web UI Operation->Softkeys and XML Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-143 Configuration Parame ters Appendix A Parameter – sof tkeyN states Idle, Connected, Incoming, Outgoing, Busy (in Web UI) Aastra Web UI Operation->Softkeys and XML Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-144 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Range V alid values are: idle The phone is not being used . connected The line currently being displayed is in an active call (or the call is on hold) incoming The phone is ring ing.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-145 Configuration Parame ters Appendix A Programmable Key Settin gs for 53i and 55i • The value of " N " for the following parameters is dependent on the number of programmable keys availabl e on the 53i models.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-146 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A • sprecode - Indicates programmable key is configured to automatically activate specific services offered by the server .
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-147 Configuration Parame ters Appendix A Range none line speeddial dnd ("do not disturb&.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-148 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – prgkeyN value Va l u e (in Web UI) Aastra Web UI Ope ration->Programmable Ke ys Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-149 Configuration Parame ters Appendix A Parameter – prgkeyN line Line (in Web UI) Aastra Web UI Operation->Programmabl e Keys Configuration Files aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-150 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A T op Softkey Settings for 57i and 57i CT Parameter – topsof tkeyN type T op Softkeys->T ype (in Web UI) Aastra Web UI Operation->Softkeys and XML Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-151 Configuration Parame ters Appendix A • sprecode - Indica tes the softkey is configured to automatically activate specific services offered by the server .
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-152 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Example topsoftkey1 type: line topsoftkey2 type.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-153 Configuration Parame ters Appendix A Parameter – topsof tkeyN label T op Softkeys->Label (in Web UI) Aastra Web UI Operation->Softkeys and XML Configuration Files aast ra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-154 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – topsof tkeyN value T op Softkeys->V alue (In WEb UI) Aastra Web UI Operation ->Softkeys and XML Configuratio n Files aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-155 Configuration Parame ters Appendix A Parameter – topsof tkeyN line T op Softkeys->Line (in Web UI) Aastra Web UI Operation->Softkeys and XML Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-156 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Handset Feature Key Settings for the 57i CT Parameter – featurekeyN type Ty p e (in Web UI) Aastra Web UI Operation-> Handset Keys Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-157 Configuration Parame ters Appendix A Range none line transfer conference public icom dire.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-158 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Exp ansion Module Key Settings for 536M (for al.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-159 Configuration Parame ters Appendix A Format • callers list - Indicates the softkey is set for accessing the Callers List. • directory - Indicates the softkey is se t for accessing the Direct ory List.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-160 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – expmodX keyN label Label (in Web UI) Aastra Web UI Operation->Expansion Module N Configuration Files aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-161 Configuration Parame ters Appendix A Parameter – expmodX keyN value Va l u e (In WEb UI) Aastra Web UI Operation- >Expansion Module N Configuratio n Files aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-162 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – expmodX keyN line Line (in Web UI) Aastra Web UI Operation->Expansion Module N Configuration Fil es aastra.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-163 Configuration Parame ters Appendix A Locking Sof tkeys an d Programmable Keys Parameter – softkeyN locked Configuration Files aastra.cfg, <mac>.
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters A-164 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameter – prgkeyN locked Configuration Files aastra.cfg, <mac>.cfg Description Locks the specifie d top softkey on the 53i or 55i IP phone .
Softkey/Programmable Key/F eature Key/Expansion Module Key Parame ters 41-001160-00, Release 2.1, Rev 04 A-165 Configuration Parame ters Appendix A Parameter – expmodX key N locked Configuration Files aastra.cfg, <mac>.cfg Description Locks the specified top so ftkey on the 5-Series Expansion Module attached to the IP phone.
Customizing 560M Expansio n Module Column Display A-166 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Customizing 560M Exp ansion Module Column Display Exp ansion Module 1 Parameter – expanmod1page1left Configuration Files aastra.
Customizing 560M Expansio n Module Column Display 41-001160-00, Release 2.1, Rev 04 A-167 Configuration Parame ters Appendix A Parameter – expanmod1page2right Configuration Files aastra.cfg, <mac>.cfg Description Allows you to specify a customized heading for the first 560M expansion module, second page, right column.
Customizing 560M Expansio n Module Column Display A-168 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Expansion Module 2 Parameter – expanmod2page1left Configuration Files aastra.cfg, <mac>.cfg Description Allows you to specify a customized headi ng for the second 560M expansion module, first page, left column.
Customizing 560M Expansio n Module Column Display 41-001160-00, Release 2.1, Rev 04 A-169 Configuration Parame ters Appendix A Parameter – expanmod2page2right Configuration Files aastra.cfg, <mac>.cfg Description Allows you to specify a customized headi ng for the second 560M expansion module, second page, right column .
Customizing 560M Expansio n Module Column Display A-170 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Exp ansion Module 3 Parameter – expanmod3page1left Configuration Files aastra.cfg, <mac>.cfg Description Allows you to specify a customized heading for the third 560M expansion module, first page, left column.
Customizing 560M Expansio n Module Column Display 41-001160-00, Release 2.1, Rev 04 A-171 Configuration Parame ters Appendix A Parameter – expanmod3page2right Configuration Files aastra.cfg, <mac>.cfg Description Allows you to specify a customized heading for the third 560M expansion module, second page, right column.
Advanced Operational Paramete rs A-172 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Advanced Operational Parameters The following parameters in this section allow the system administrator to set advanced operatio nal features on the IP phones.
Advanced Operational Paramete rs 41-001160-00, Release 2.1, Rev 04 A-173 Configuration Parame ters Appendix A Up date Caller ID Setting. Boot Sequence R ecovery Mode. Parameter – sip update callerid Configuration Fi les aa stra.cfg, <ma c>.cfg Description Enables or d isables the updating of the Caller ID information during a call.
Advanced Operational Paramete rs A-174 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Single Call Restriction Parameter – two call support T wo Call Support (in Web UI) Aastra Web UI Advanced Setting s->Global SIP->RTP Settings Configuration Fi les aastra.
Advanced Operational Paramete rs 41-001160-00, Release 2.1, Rev 04 A-175 Configuration Parame ters Appendix A Blacklist Duration Whitelist Proxy Parameter – sip blacklist duration Blacklist Duration (Aastra W eb UI) Aastra Web UI Advanced Settings->Gl obal SIP Settings-> Advanced SIP Settings Configuration Fi les aastra.
Advanced Operational Paramete rs A-176 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Symmetric UDP Signaling Setting User-Agent Setting Parameter – sip symmetric udp signaling Configuration Fi les aastra.cfg, <mac>.
Troubleshooting Parameters 41-001160-00, Release 2.1, Rev 04 A-177 Configuration Parame ters Appendix A T roubleshooting Parameters The following parameters in this section allow the system administrator to set logging and support settings for troubleshooting purposes.
Troubleshooting Parameters A-178 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix A Parameters – log modul e <module na me> Module/Debug Level (in Web UI) Aastra Web UI Advanced Settin gs->T roubleshooting-> Module/Debug Level Configuration Files aastra.
41-001160-00, Release 2.1, Rev 04 B-1 Appendix B Appendix B Configuration Server Setup About this appendix Introduction This appendix describes how to setup th e T FTP protocol configuration server in your network.
Configuration Server Pr otocol Setup B-2 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix B Configuration Server Protocol Setup TFTP Server Set-up There are a number of TFTP servers av ailable. PumpKIN is one of such TFTP servers.
Configuration Server Pr otocol Setup 41-001160-00, Release 2.1, Rev 04 B-3 Configuration Server Setup Appendix B If you want to prevent users from wr iting files to the directory select the “Deny all requests” in the “W rite Request Behavior” category .
.
41-001160-00, Release 2.1, Rev 04 C-1 Appendix C Appendix C Configuring the IP Phone at the Asterisk IP PBX About this appendix Introduction This appendix describes how to setup a u ser ’ s phone with an extension to make and receive calls using the Asterisk as the PBX.
IP Phone at the Asterisk IP PBX C-2 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix C IP Phone at the Asterisk IP PBX The following configur ation illustrates how to create a user with an extension to make and receive calls using the Asterisk as the PBX.
IP Phone at the Asterisk IP PBX 41-001160-00, Release 2.1, Rev 04 C-3 Configuring the IP Phone at the Asterisk IP PBX Appendix C ;able to use it. In this examp le' sip' is u sed. Y ou can use ;whatever you like, but make sur e they ar e the same, you will ;need to make an entry in your extensions.
.
41-001160-00, Release 2.1, Rev 04 D-1 Appendix D Appendix D Sample Configuration Files About this appendix Introduction This appendix provides sample co nfigura tion files for the 57i, 57i CT , and 53i.
Sample Configuration Files D-2 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix D Sample Configuration Files This section consists of the sample conf iguration files necessary to configure t he IP phones. The general format is simila r to configuration files used by several Unix-based programs.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-3 Sample Configuration Files Appendix D # The Aastra 57i, 57iCT, and 53i phones will download 2 # configuration files from t he TFTP server while restarting, the # "aastra.cfg" file and the "<mac>.
Sample Configuration Files D-4 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # Network Settings ## = = = = = = = = # Notes: If DHCP is enabled, you do not need to set these net work # settings. Although depend ing on you DHCP server configurat ion you # may still have to set the dns address.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-5 Sample Configuration Files Appendix D # NAT device between the se rver and the phone, then you must set the # following two parameters for the phone to function correct ly.
Sample Configuration Files D-6 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix D ## = = = = = = = = = = = = = = = # Notes: This section define s which server the phone retrieve s new # firmware images and config uration files from.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-7 Sample Configuration Files Appendix D # # (1) The entered number i s an exact match in the dial plan # (2) The "#" symbol has.
Sample Configuration Files D-8 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix D #sip dial plan terminator: 1 # enable sending of the "#" sy mbol to # to the proxy i.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-9 Sample Configuration Files Appendix D sip screen name: Joe Smith # the name display on the phon e's screen sip user name: 4256 # the phone number sip display name: Joseph Smi th # the caller name sent out whe n making # a call.
Sample Configuration Files D-10 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D sip line3 vmail: *78 # configure line 5 (a soft k ey line) as an ordinary line # of a test .
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-11 Sample Configuration Files Appendix D # with it as seen here in t he default softkey settings. # SOFTKEY TYPES: "line", "s peeddial", "blf", "list", "dnd" # SOFTKEY LABEL: Alpha nume ric name for the softkey.
Sample Configuration Files D-12 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D softkey8 line: 1 # list softkey11 type: list softkey12 type: list 57i CT Sample Configurati.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-13 Sample Configuration Files Appendix D # "aastra.cfg" file and the "<mac>.
Sample Configuration Files D-14 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # Network Settings # ================ # Notes: If DHCP is enabled, you do not need to set these net work # settings. Although depend ing on you DHCP server configurat ion you # may still have to set the dns address.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-15 Sample Configuration Files Appendix D #ip: # This value is uni que to each phone on a server # and should be set in the "<mac>.
Sample Configuration Files D-16 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D #sip nortel nat timer: 60 # seconds between keep alive messages # Option 2: # # If you are using a sessio n border controller, you should s et the # outbound proxy to the ses sion border controller address #sip outbound proxy: sbc.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-17 Sample Configuration Files Appendix D # Notes: This section define s which server the phone retrieve s new # firmware images and config uration files from.
Sample Configuration Files D-18 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # As you dial a number on t he phone, the phone will initiate a call # when one of the foll.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-19 Sample Configuration Files Appendix D # with a 0 or 1, any 5 digit numb er # beginning with a number between 2 and 8 # (inclusive) or .
Sample Configuration Files D-20 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # L1 to L4 on the 57i an d 57iCT # L1 to L3 on the 53i # # These can be over-ridden on a per-line basis using the pe r-line # settings.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-21 Sample Configuration Files Appendix D # configure line 3 as the su pport Broadsoft SCA line # - the proxy and registra r settings are .
Sample Configuration Files D-22 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # Softkeys can be set either server wide or unique to each ph one. # Setting softkeys as line/c all appearances should be done in the # "<mac>.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-23 Sample Configuration Files Appendix D softkey2 type: speeddial softkey2 label: "Call Return " softkey2 value: *69 # DND Key .
Sample Configuration Files D-24 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # aastra.cfg or the <mac>.c fg files. # # The feature keys are disp layed when the user presses the F button # on the cordless phone's h and set.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-25 Sample Configuration Files Appendix D Feature key 0 Gr label: "Gr- Line 1" # German label for the key. Displayed when the phone's langu age # is set to use German Feature key 0 It label: "It- Line 1" # Italian label for the key .
Sample Configuration Files D-26 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # 58 - Menu (Options) # 59 - Feature Key # 60 - Redial # 61 - Directory # 62 - Callers&apos.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-27 Sample Configuration Files Appendix D Feature key 0 hs event: 7 Feature key 0 base event: 1 Feature key 1 En label: "Con f." Feature key 1 Fr label: "Fr- Conf." Feature key 1 Sp label: "Sp- Conf.
Sample Configuration Files D-28 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D Feature key 5 hs event: 62 Feature key 5 control: 1 Feature key 5 base event: 13 Feature ke.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-29 Sample Configuration Files Appendix D 53i Sample Configuration File # Sample C onfiguratio n File #= = = = = = = = = = = = = = = = = =.
Sample Configuration Files D-30 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # The "aastra.cf g" file configu res the settings serve r wide, while # the "<ma c>.cfg" fil e configures only the ph one with t he MAC # address for which t he file is na med (for ex ample, # "00085d0 304f4.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-31 Sample Configuration Files Appendix D #ip: # This value is unique to each phone on a serv er # and should be set in th e "<mac>.
Sample Configuration Files D-32 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D #sip nortel nat ti mer: 60 # seconds between keep alive me ssages.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-33 Sample Configuration Files Appendix D # Option 2: # # If you are using a session bord er controll er, you sh ould set th e # outboun d proxy to the session b order contr oller addr ess #sip outbound proxy: sbc.
Sample Configuration Files D-34 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-35 Sample Configuration Files Appendix D ## TFTP se rver settin gs tftp serv er: 192.168 .0.130 #alternate tftp serve r: #use alter nate tftp s erver: 1 # If your DHCP serve r assigns # a TFTP s erver addr ess which # you do n ot use, yo u can use # the alte rnate tftp server.
Sample Configuration Files D-36 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D #.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-37 Sample Configuration Files Appendix D # 0,1,2 ,3,4,5,6,7, 8,9,*,# : ma tches the k eypad symb ols # x : ma tches any d igit (0.
Sample Configuration Files D-38 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D # General SIP Sett ings # =========== =========== #sip sessi on timer: 3 0 # enab le suppor.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-39 Sample Configuration Files Appendix D sip auth n ame: jsmith # accoun t used to a uthenticat e user sip passwo rd: 12345 # p assword for authentic ation accou nt sip mode: 0 # l ine type: # 0 - generi c, # 1 - BroadS oft SCA li ne # 2 - Nortel line sip proxy ip: proxy.
Sample Configuration Files D-40 41 -001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix D sip line5 screen name : Test 1 sip line5 user name: 5551001 sip line5 displa y name: Test 1 sip line5 auth name: 5551001 sip line5 password: 5 551001 sip line5 mode: 0 sip line5 proxy ip : 10.
Sample Configuration Files 41-001160-00, Release 2.1, Rev 04 D-41 Sample Configuration Files Appendix D # PRGKEY VALUE: If prgkey type i s a speeddi al, any DT MFs (from # 0 - 9, *, "#") o r a comma ( ,) for 500 ms pause an d # 'E' for On-hook can be set for the va lue.
.
41-001160-00, Release 2.1, Rev 04 E-1 Appendix E Appendix E Sample BLF Softkey Settings About this appendix Introduction This appendix provides sample BLF softkey settings for both the Asterisk server and the BroadSoft BroadW orks server .
Sample BLF Softkey Settings E-2 41-001160-00, Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix E Sample BLF Sof tkey Settings Asterisk BLF The following are sample softkey and prog rammable key config urations to enable Asterisk BLF support on Aastra IP phones.
Sample BLF Softkey Settings 41-001160-00, Release 2.1, Rev 04 E-3 Sample BLF Softkey Settings Appendix E BroadSof t BroadWorks BLF The following are sample softkey and prog rammable key config urations to enable Broadsoft BroadW orks Busy Lamp Field support on Aastra IP ph ones.
.
41-001160-00, Release 2.1, Rev 04 F-1 Appendix F Appendix F Sample Multiple Proxy Server Configuration About this appendix Introduction This appendix provides a sample multiple proxy server configuration.
Multiple Proxy Serv er Configuration F-2 41-001160-00, Release 2 .1, Rev 04 IP Phone Administra tor Guide Appendix F Multiple Proxy Serv er Configuration Multiple proxy servers can be configured in the aastra.
Multiple Proxy Serv er Configuration 41-001160-00, Release 2.1, Rev 04 F-3 Sample Multiple Proxy Se rver Configuration Appendix F Continued..... #line 2 sip line2 auth name: sip line2 password: sip li.
.
41-001160-00, Release 2.1, Rev 04 G-1 Appendix G Appendix G Creating an XML Application About this appendix Introduction This appendix provides info rmation required to create an XML application for use on the IP phones.
About this appendix G-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Attributes/Options to Use with XML Objects page G-40 HTTP Post page G-62 XML Schema File page G-65 T.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-3 Creating an XML Application Appendix G How to Create an XML Application Overview This Appendix describes how to create an XML application for your IP phones.
How to Create an XML Application G-4 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Creating XML Object s This section describes how to create XML objects. The IP phone XML API su pport s the following proprietary objects that allow for the customization of th e IP phon e’ s display .
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-5 Creating an XML Application Appendix G Creating Custom Sof tkeys Developers can link arbitrary URIs to softkeys in the XML screens and can invoke softkey behavior to each XML scr een type (T ext Me nu, T ext Screen, User Input, Directory).
How to Create an XML Application G-6 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix G T ext Menu Object (Menu Screens) The T ext Menu object allows appl ication developers to create a numerical list of menu items on the I P phones.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-7 Creating an XML Application Appendix G XML example : <AastraIPPhoneTextMenu> <Title>Phone Services</Title > <MenuItem base = "http://10. 50.10.53/"> <Prompt>Traffic Reports</Pro mpt> <URI> rss_to_xml.
How to Create an XML Application G-8 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Appendix G T urning Off Automatic Numbering of Menu Items When implementing the AastraIPPhoneT extMenu o bject, you can turn of f automatic numbering of the items in a list using the style=”none " attri bute.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-9 Creating an XML Application Appendix G XML Screen Example: The follow ing exampl e shows th e items in the T ext Menu without the item numbering.
How to Create an XML Application G-10 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Using Bullet s in Menu Items When implementing the AastraIPPhoneT ex tMenu object, you can use bullets to list items using the style=”bullet " att ribute.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-11 Creating an XML Application Appendix G XML Screen Example: The follow ing exampl e shows th e items in the T ext Menu without the item numbering.
How to Create an XML Application G-12 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G T ext Screen Object (T ext Screens) Yo u u s e t h e AastraIPPhoneT extScreen object to display text to the LCD screen on the IP Phone. The screen text wraps appropriately and can scroll to display a message longer then four lines.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-13 Creating an XML Application Appendix G XML Example 1 : <AastraIPPhoneTextScreen destroyOnEx it = "yes"> <Title>Screen Object</Title> <Text>The screen object can be implemented similar to the firmware info screen.
How to Create an XML Application G-14 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Example 2 : <AastraIPPhoneTextScreen doneAction = ”http://10.50.10.117/ test.xml”> <Title>Screen Object</Title> <Text>For more information a bout this test, press Done.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-15 Creating an XML Application Appendix G XML Support for Answer and Ignore Sof tkeys When the IP phone receives an XML applicat io.
How to Create an XML Application G-16 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Example : <SoftKey index="1"> <Label>Answer</Label> &l.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-17 Creating an XML Application Appendix G Implement ation (53i) XML Example : <AastraIPPhoneTextScreen allowAnswer = "yes" > <Title>Screen Object</Title> <Text>The screen object can be implemented similar to the firmware info screen.
How to Create an XML Application G-18 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G • The second block displays below the first block. By default, the second text block displays as scrolling text. This block takes up as many lines as t he XML developer specifies, up to the LCD scree n size.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-19 Creating an XML Application Appendix G XML Example : The following is an example of usin g the AastraIPPhoneFormattedT extSc reen object with a static line at the top and bottom blocks and 2 sc rolling lines in the middle block.
How to Create an XML Application G-20 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G IP Phone 53 i Note: Y ou can view all 5 lines at once on the 55i, 57i and 57i CT IP phones. Y ou can view only 2 lin es at a time (up to 5 lines) on the 53i IP phone.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-21 Creating an XML Application Appendix G UserInput Object (User Input Screens) The AastraIPPhoneInputScr een object allows application developers to create screens for which the user can input text wh ere applicable.
How to Create an XML Application G-22 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Description : <AastraIPPhoneInputScreen ty pe = "IP/string/number" pa.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-23 Creating an XML Application Appendix G XML Example : <AastraIPPhoneInputScreen ty pe = "IP"> <Title>Proxy Server</Title> <Prompt>Server IP:</Prompt> <URL>http://10.
How to Create an XML Application G-24 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Implement ation (Number) The following is ho w you would implement the UserInput object using Numbers.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-25 Creating an XML Application Appendix G Implement ation (S tring) The following is how yo u would implement t he UserInput object using Strings in XML.
How to Create an XML Application G-26 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Sof tkey for S pecial Characters (User Input Screens for 55i, 57i , and 57i CT only) In Release 2.1, the IP Phone can dynam ically receive a Symbol List when it receives the AastraIPPhoneInputScreen XML ob ject.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-27 Creating an XML Application Appendix G Implement ation Softkeys : • 1 = <Single Symbol or Symbol List> XML Softkey Examp.
How to Create an XML Application G-28 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G T ime and Date Format s (User Input Screens) The AastraIP PhoneInputScr een object all.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-29 Creating an XML Application Appendix G IP Phones 55i, 57i/57i CT IP Phone 53i International T ime <AastraIPPhoneInputScreen t.
How to Create an XML Application G-30 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G United S tates Date <AastraIPPhoneInputScreen ty pe="dateUS"> <Titl.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-31 Creating an XML Application Appendix G Multiple Input Fields (User Input Sc reens) Y ou can have multiple input fields per AastraIPPhoneInputScreen object.
How to Create an XML Application G-32 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Y ou use the following attributes to cr eate multiple input fields using the AastraIPPhoneInput Screen obje ct.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-33 Creating an XML Application Appendix G </InputField> <InputField type="timeUS" > <Prompt>Time:</P.
How to Create an XML Application G-34 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Scolling down changes to the next input field . Scre en 2 Note : Notice that the softkeys change to reflect the new input type, timeUS. Scrolling down again goes to the next page of inputs.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-35 Creating an XML Application Appendix G Condensed Mode Screen If you use the attribute “ displayMode = “condensed ” in the root tag ( Scr een 4 ), the display changes to have prompt and in puts on the same line.
How to Create an XML Application G-36 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Directory Object (Dir ectory List Screen) (57i only) The Director y object allows you to browse an online direct ory in real time. It displays an automatically nu mbered list of contacts.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-37 Creating an XML Application Appendix G XML Example : <AastraIPPhoneDirectory next ="more.xml" previous="back.xml"> <Title>My Directory</Title> <MenuItem> <Prompt>57i - John Doe 1</Pr ompt> <URI> 10.
How to Create an XML Application G-38 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G S t atus Message Obj ect (Idle Screen) The IP phones support an XML AastraIPPhoneS tatus object for displaying status messages on a single designated line on the phone’ s idle screen.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-39 Creating an XML Application Appendix G XML Examples Example 1 : The following is an example of using the AastraIPPhoneS tatus ob.
How to Create an XML Application G-40 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Execute Commands Object (for executing XML commands) An AastraIPPhoneExecute object on the IP ph ones allows the phone to execute commands using XML.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-41 Creating an XML Application Appendix G Using the Reset Command The <Execu teItem URI =""/> tag can be ent ered with th e command the phone should execute. Upon receiving an Aa straIPPhoneExecute object, the phone begins executing the URL or URI specified.
How to Create an XML Application G-42 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Using the FastReboot Comman d Using an XML post, the FastReboot feature forces a phone to reboot in the idle state.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-43 Creating an XML Application Appendix G The command for LE D control is sent usi ng the XML HTTP post from one of t he XML push server lists. The following e xample shows an XML LED command in an AastraIPPhon eExe cute script.
How to Create an XML Application G-44 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Dynamic Configuration Object (to pu sh a configuration to the phone) The IP phones provide an XML feature th at allows you to make configuration changes to the phone that take affect im mediately , witho ut having to reboot the phone.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-45 Creating an XML Application Appendix G XML Example: The followin g is an exam ple of an X ML co nfiguration script that creates .
How to Create an XML Application G-46 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Dynamic Configuration Parameters The following table iden tifies which configuratio n parameters change dynamically when using XML configuration scripts to push th e configuration to the phone.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-47 Creating an XML Application Appendix G *Changes to subscriptions (BLF or BLA) require a reboot. **This parameter is dynamic so a user can’t access it or a dd to it. However , you need to reboot the phone to clear the list.
How to Create an XML Application G-48 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Image Object s (55i, 57i/57i CT only) The 55i and 5 7i/57i CT IP pho nes provide an XML feature that allows you to load images in XML applications that displa y to the LCD screen.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-49 Creating an XML Application Appendix G Y ou can include images with an XML object in two ways: • Using pixel data stored with .
How to Create an XML Application G-50 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Example : The XML script fo r the AastraIPPhoneImageScr een object is as follows: .
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-51 Creating an XML Application Appendix G AastraIPPhoneImageMenu The AastraIPPhoneImageMenu object allows you to use a bitmap image to display as a menu. Each menu item is linked to a keypad key (0-9, *, #).
How to Create an XML Application G-52 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Each URI is appended to the “base” URI if one exists. The default softkey is a “Done” key at the bottom right position . It is a parse error if two URIs specify the same index.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-53 Creating an XML Application Appendix G AastraIPPhoneT extMenu (Icon Menu) The AastraIPPhoneT extMenu (Icon Menu) object is ident.
How to Create an XML Application G-54 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Screen Example : Using the <IconList> Y ou can incorporate the use of an <IconList> attribute in the XML script to define the images you will use wi th th e AastraIPPhoneT extMenu object.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-55 Creating an XML Application Appendix G Y ou can use one or both ways to load images within the same XML script. The softkey icons disp lay at the edge of th e screen. Any XML object that supports softkeys can support the optional <IconList> tag.
How to Create an XML Application G-56 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G XML Screen Example: IP Phone Internal Icon Images The IP phones have internal icon im ages you can use when specifying the “Icon:<uri name>” attribute in the <I conList>.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-57 Creating an XML Application Appendix G ArrowUp ArrowDown ArrowsUpandDown FilledCircle EmptyCircle Envelope Prohibit Square Ellip.
How to Create an XML Application G-58 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G Attributes/Options to Use with XML Object s Beep Attribute (configurable via XML objec.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-59 Creating an XML Application Appendix G T imeout Attribute (configurable via XML object s only) The XML “ Tim eo u t ” attribute allows you to specify a timeout value for the LCD screen display .
How to Create an XML Application G-60 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G LockIn Attribute (configurable via XML object s only) The XML “ LockIn” attribute .
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-61 Creating an XML Application Appendix G CancelAction Attribute (configurable via XML object s only) The XML “ cancel Action” attribute allows you to specify a URI that a GET is executed on when the user presses the default CANCEL key .
How to Create an XML Application G-62 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G HTTP Post In addition to initiating a request to an XML applicati on from the Services menu, an HTTP server can push an XML object to the phone via HTTP Post.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-63 Creating an XML Application Appendix G Example 2 : Below is a sample php source code whic h sends an XML object to an Aastra phone. <?php # function push2phone($server, $phone,$data) { # url-encode the xml object $xml = "xml=".
How to Create an XML Application G-64 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G HTTP Refresh Header Y ou can use an HTTP refresh header w ith the XM L screen objects on the IP phones.
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-65 Creating an XML Application Appendix G HTTP Language Header Y ou can use an HTTP language header w ith t he XML screen objects on the IP phones.
How to Create an XML Application G-66 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G </xs:element> </xs:sequence> <xs:AastraIPPhoneTextScreen LockIn=" .
How to Create an XML Application 41-001160-00, Release 2.1, Rev 04 G-67 Creating an XML Application Appendix G <xs:sequence> <xs:element name="Title" /> <xs:element name=".
How to Create an XML Application G-68 41-001160-00 , Release 2.1, Rev 04 IP Phone Administra tor Guide Appendix G </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> .
41-001160-00, Release 2.1, Rev 04 -1 Limited W arranty Limited W arranty Aastra T elecom warrants this product agai nst defects and malfunctions during a one (1) year period from the date of orig inal purchase.
-2 41-001160-00, Rel ease 2.1, Rev 04 IP Phone Administra tor Guide Limited W arranty W arranty Repair Services Should the set fai l during the warranty period: In North America, please call 1-800-5 74-161 1 for further information. Outside North America , contact your sales representa tive for return instructions.
41-001160-00, Release 2.1, Rev 04 Index-1 Index A Aastra W eb UI advanced settin gs description 2-13 basic settings description 2-12 enabling and disabling 2-14 operation description 2-10 status descr.
Index-2 41-001160-00, Release 2.1, Rev 04 Index call waiting 5-43 call waiting tone 5-44 call waiting tones 5-78 caller s list downloading to phone 5-178 enabling/disabling 5-176 overview 5-174 using .
41-001160-00, Release 2.1, Rev 04 Index-3 Index displaying 5-41 DTMF methods 4-68 DTMF playback, configuring suppression for 5-39 DTMF , out-of-band 4-67 DTMF , suppressing playback 5-39 E emergency d.
Index-4 41-001160-00, Release 2.1, Rev 04 Index language overview 5-21 specifying on IP phone 5-24 W ebPage Language 3-30 language pack settings 1-1 10 language settings 1-109 last call return (lcr) c.
41-001160-00, Release 2.1, Rev 04 Index-5 Index auto-answer settings 1-121 blacklist duration 1-175 BLF subscription period 1-68 blind transfer setting 1-172 boot sequence recover mode 1-173 call forw.
Index-6 41-001160-00, Release 2.1, Rev 04 Index internal 3-27 priority 3-27 Programmable key settings 53i, 55i 1-145 programmable keys 5-93 configuring 5-103 public key 5-1 10 Q QoS 4-31 R redial key .
41-001160-00, Release 2.1, Rev 04 Index-7 Index backup proxy port 3-46 backup proxy server 3-46 backup registrar port 3-48 backup registrar server 3-48 outbound proxy port 3-47 outbound proxy server 3.
Index-8 41-001160-00, Release 2.1, Rev 04 Index W warranty 0-1 warranty exclusions 0-1 whilte list proxy 6-19 X xfer key 5-101 , 5-109 Xfer key , enabling/disabling 5-66 XML configuring 5-203 configur.
.
SIP IP Phone Administrator Guide Models 53i, 55i, 57 i, and 57i CT © 2007 Aastra T elecom Inc. If you’ve read this owner ’s manual and consulted the T roubleshooting section and still have problems, please visit our we bsite at www .aastratelecom.
デバイスAastra SIP 53Iの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Aastra SIP 53Iをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAastra SIP 53Iの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Aastra SIP 53Iの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Aastra SIP 53Iで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Aastra SIP 53Iを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAastra SIP 53Iの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Aastra SIP 53Iに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAastra SIP 53Iデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
