Kawasakiメーカー73690の使用説明書/サービス説明書
ページ先へ移動 of 28
Please read this manual and save it with y our original sales receipt. T ools needed f or assembly: Phillips Screwdriv er , Hammer and Pliers (all not included); Cap Nut Assembly T ool (included). Use only with a P ow er Wheels ® 12 V olt Batter y with Built-in Thermal Fuse and a P ow er Wheels ® 12 V olt Charger (both included).
Table of Contents Important Information A Impor tant Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B W ar nings and Caution . . . . . . . . . . . .
CA UTION • In the unassembled state , this package contains small par ts. Adult assembly is required. • Use the charger in dr y locations only . W ARNING • Prevent Injuries and Deaths • Direct Adult Super vision Required • K eep Children Within Saf e Riding Areas.
Parts C Wheel - 4 • If you e xperience a problem with this product, or are missing a par t, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all par ts before assemb ly and sav e all packaging material until assembly is complete to ensure that no par ts are discarded.
All Shown Actual Size P ar t Not Shown : Label Sheet #10 - 32 x 1 1 / 2 " Screw – 2 .437 Cap Nut – 6* 7 / 16 " Washer - 5 * Radio Knob - 2 12 V olt Batter y Cap Nut Assembly T ool Round .
Parts Diagram D 1. V ehicle Body 2. Cowling 3. Seat 4. Wheel - 4 5. Hubcap - 4 6. Cap Nut - 6 7. Steering Column 8. Right Mudflap 9. 12 V olt Batter y 10. K ey Assemb ly 11. Microphone 12. Radio Knob - 2 13. Grip - 2 14. T op Handlebar Cov er 15 Bottom Handlebar Cov er 16.
Battery Charging E About Thermal Fuses Y our P ower Wheels ® 12 v olt batter y is equipped with a built-in thermal fuse. The ther mal fuse is a self-resetting saf ety device which automatically “trips” and shuts down operation of the v ehicle if the vehicle is ov erloaded or the driving conditions too sev ere.
Battery Charging • Plug the charger connector into the batter y . • Plug the charger into a standard 120 v olt wall outlet . Note: If power flo w to the wall outlet is controlled by a s witch, make sure the s witch is “ON”. • Bef ore first-time use, charge the batter y for at least 18 hours.
Assembly • P osition the v ehicle body upside down. Note: The mudflaps are marked “R” and “L ” to designate right and left. • With the “R” marking facing up , align the two round holes in the right mudflap with the pegs on the inside of the right fender .
• P osition the v ehicle body upr ight. F ace the back end of the vehicle body . Hint: Y ou will need to temporarily hold the remaining rear wheel driver onto the motor assemb ly to proper ly position the rear axle assembly into the motor assemb ly .
• F ace the front end of the v ehicle body . • Slide a washer onto one of the front axles. • Slide a round bushing, ring end first, onto the front axle. • Slide a wheel (ribbed side first) onto the front axle. • Slide a hubcap (indented side out) onto the front axle.
• Lift the front end of the v ehicle. • Slide the tabbed end of the steering column through the slot in the upper steering linkage and out through the hole in the vehicle body . • Inser t the cur ved end of the steering column into the hole in the lower steering linkage.
Assembly Steering Column Handlebar Assembly Neck Groov e Bottom Handlebar Cov er • Fit the bottom handlebar cov er onto the end of the steering column. Make sure the rim on the bottom handlebar cov er fits into the hole in the vehicle body . • Fit the handlebar assembly , neck side do wn, onto the end of the steering column.
• While pushing the top handlebar cov er and the fairing together , inser t four #8 x 3 / 4 " scre ws through screw tab in the top handlebar cov er and into the fairing. • Tighten the screws with a Phillips scre wdriver . Do not ov er-tighten.
Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • W ash your hands bef ore applying the labels. • Bef ore applying the labels, wipe the surf ace of the vehicle with a clean, dry cloth to remove an y dust or oils.
T M ® ® T M Right Side Left Side Label Decoration 8 7 12 1 3 22 2 5 11 10 13 24 22 4 6 9 14 16 3 4.
IMPORT ANT! Use only a P ower Wheels ® 12 v olt batter y with built-in thermal fuse. Use of any other battery will damage your v ehicle. Make sure that y ou charge the batter y f or at least 18 hours using the enclosed P ower Wheels ® 12 volt charger bef ore operating y our vehicle f or the first time.
If a battery leak develops, av oid contact with the leaking acid and place the damaged batter y in a plastic bag. See inf or mation below f or proper disposal. If acid comes in contact with skin or eyes, flush with cool water f or at least 15 minutes and call a ph ysician.
T each Safety Rules to Children While children can quickly de velop the skill necessary to drive this v ehicle, it is impor tant to remember that their judgment skills are still ve r y immature. Unsuper vised driving by children can lead to serious injur y .
• Make sure the shifter is in the LO W SPEED position. • Press the f oot pedal. The vehicle will driv e forward at a maximum of 2 1 / 2 mph. • Help your child pr actice steer ing to lear n how f ar and how quic kly to tur n the handlebar when dr iving f orward in low speed.
IMPORT ANT! T o av oid damaging the motors and gears, stop the vehicle bef ore shifting between low and high speed. • Make sure the shifter is in the HIGH SPEED position. • Press the f oot pedal. The vehicle will driv e forward at a maximum of 5 mph.
Pr oblems and Solutions Guide IMPORT ANT! If you e xper ience a problem with y our vehicle, first chec k the Problems and Solutions Guide below . If you still e xper ience a problem, please contact P ow er Wheels ® Consumer Relations , toll-free at 1-800-348-0751 between 8 AM and 6 PM (EST) Monda y through F r iday .
Pr oblems and Solutions Guide Short run time Undercharged battery Charge the battery . A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
Pr oblems and Solutions Guide Problem Possible Cause Solution When the foot pedal is pressed Operation of vehicle in low speed It is possible that only one rear wheel may spin when both only one rear wheel spins rear wheels ar e raised off the ground and the vehicle is in low speed.
SA CRAMENT O - California Electric Ser vice Center , 1821 “Q” Street, 95814, (916) 443-5711 SALINAS - SRS Hobbies, 407 F ront Street, 93901, (831) 424-4044, SAN DIEGO - California Electric Ser vice Center, 3430 El Cajon Blvd., 92104, (619) 283-6488 SAN JOSE - California Electric Ser vice Center, 481 So .
A uthorized Ser vice Centers LAKE CHARLES - Capitol Schwinn Cyclery , 722 E. Prien Lake Road, 70605, (337) 474-9090 NEW IBERIA - V oorhies Supply Company , 401 W . St. Peter Street, 70560, (337) 364-2431 NEW ORLEANS (MET AIRIE) - Le Jouet, Inc., 1700 Airline Hwy .
A uthorized Ser vice Centers D A YTON - La y er Electric, 603 South Ludlo w Street, 45402, (937) 224-9608 D A YTON (NEW CARLISLE) - Ballweg Do-It Center , 3300 South Dayton, Lak eview Rd.
If y ou are missing par ts or need assistance, please call us toll-free: P ower Wheels ® Consumer Relations 1-800-348-0751 8 AM - 6 PM EST , Monda y through Frida y . Over 400 A uthorized Service Centers Or contact your local P ow er Wheels ® Authorized Service Center .
デバイスKawasaki 73690の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Kawasaki 73690をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKawasaki 73690の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kawasaki 73690の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kawasaki 73690で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kawasaki 73690を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKawasaki 73690の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kawasaki 73690に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKawasaki 73690デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。