KenwoodメーカーKRF-V5080Dの使用説明書/サービス説明書
ページ先へ移動 of 32
IT ALIANO DEUTSCH FRANÇAIS ENGLISH ESP AÑOL NEDERLANDS B60-5451-00 00 MA (E) 0311 AUDIO VIDEO SURROUND RECEIVER KRF-V5080D INSTRUCTION MANUAL KENW OOD CORPORA TION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes.
2 EN ENGLISH Before applying the power Caution : Read this page carefully to ensure safe operation. How to use this manual This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information.
3 EN ENGLISH Before applying the power ........................................................ 2 Safety precautions .................................................................... 2 How to use this manual ........................................
4 EN ENGLISH Special features T rue home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
5 EN ENGLISH ON OFF POWER PHONES SPEAKERS ON/OFF ON/STANDBY STANDBY ACTIVE EQ ACTIVE EQ DTS DOLBY DIGITAL INPUT MODE BAND AUTO MEMORY SETUP MUTE DOWN UP MULTI CONTROL INPUT SELECTOR VOLUME CONTROL SOU.
6 EN ENGLISH Names and functions of parts Remote control unit (RC-R0627) 1 DISC SKIP BASS BOOST AUTO PHONO CD/DVD DVD TUNER MD/TAPE VIDEO1 VIDEO2 23 POWER DVD POWER RECEIVER MENU P.CALL TUNING MUTE VOLUME A/B+100 ENTER BAND P.CALL MULTI CONTROL 45 6 78 9 0+ 1 0 SETUP OSD SOUND RETURN LISTEN MODE DVD/6CH DISC SEL.
7 EN ENGLISH Setting up the system Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
8 EN ENGLISH PHONO GND CD / DVD REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE L R AUDIO Setting up the system Connecting audio components IN OUT IN OUT OUT OUT To AC wall outlet Record player Cassette deck or MD recorder CD or DVD player Video component ( Moving coil (MC) cartridge record player cannot be used directly from the receiver unit.
9 EN ENGLISH Setting up the system PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 VIDEO 2 IN DVD IN MONITOR OUT VIDEO 1 OUT VIDEO 1 IN VIDEO AUDIO Connecting video components A video component with digital audio outputs should be connected to the VIDEO 2 jacks.
10 EN ENGLISH VIDEO 2 DVD/6CH CD / DVD COAXIAL OPTICAL DIGITAL IN Setting up the system Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
11 EN ENGLISH CENTER SUB WOOFER SURROUND FRONT VIDEO 1 OUT VIDEO 1 IN VIDEO 2 IN DVD IN MONITOR OUT VIDEO 2 DVD / 6CH CD/DVD COAXIAL OPTICAL DVD/6CH INPUT VIDEO DIGITAL IN Setting up the system Connecting a DVD player (6-channel input) CAUTION Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.
12 EN ENGLISH SURROUND + - R GRAY L BLUE SPEAKERS (8-16 Ω ) CENTER FRONT + - C R L RED WHITE GREEN SPEAKERS (8 SUB WOOFER PRE OUT PRE OUT SURR BACK L SURR BACK R Setting up the system Connecting the.
13 EN ENGLISH GND AM ANTENNA FM 75 Ω Setting up the system Connecting the terminals Speaker impedance After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings.
14 EN ENGLISH 1 Turn on the power to this receiver by pressing POWER ON/OFF and ON/STANDBY or POWER key. 2 Press the SETUP key to enter the SETUP mode and use the MULTI CONTROL knob or MULTI CONTROL % / fi keys for the following displays.
15 EN ENGLISH 9 Press the SETUP key again to accept the setting. • The Surround speaker setting indication “SURR NML” appears. 0 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select the appropriate Surround speaker setting.
16 EN ENGLISH Preparing for surround sound 6 Adjust the LFE (Low Frequency Effects) level 1 Select the LFE LEVEL from the set up displays and press the SETUP key again. 2 Use the MULTI CONTROL Knob or MULTI CONTROL % / fi keys to adjust the LFE LEVEL.
17 EN ENGLISH Preparing for playback Some preparatory steps are needed before starting playback. Turning on the receiver 1 Turn on the power to the related components.
18 EN ENGLISH Normal playback Adjusting the sound Adjusting the Tone (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 1 Press the TONE key to select the TONE mode. 2 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select TONE ON/OFF.
19 EN ENGLISH Recording Recording audio (analog sources) Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than “MD/TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording.
20 EN ENGLISH Using RDS (Radio Data System) RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal.
21 EN ENGLISH 2 Press the MEMORY key while receiving the station. 3 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select one of the station presets (1 – 40). 4 Press the MEMORY key again to confirm the setting. • Repeat steps 1 , 2 , 3 , and 4 to store as many stations as necessary.
22 EN ENGLISH Listening to radio broadcasts Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
23 EN ENGLISH Ambience effects Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
24 EN ENGLISH Ambience effects DVD 6-channel mode Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy multi-channel encoded DVD source material in all its splendor.
25 EN ENGLISH Ambience effects Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.).
26 EN ENGLISH DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
27 EN ENGLISH Convenient functions MULTI CONTROL DIMMER SOUND SOUND MULTI CONTROL Ambience effects Midnight mode (Dolby Digital and DTS mode only) When watching movies at night, you might not be able to raise the volume as loud as normal.
28 EN ENGLISH Ambience effects Soundfield is adjusted towards the front. Soundfield is in neutral position. Soundfield is adjusted towards the rear. Center Width mode (Pro Logic II x and Pro Logic II .
29 EN ENGLISH DVD player operation keys The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player.
30 EN ENGLISH Amplifier Cause • The speaker cords are disconnected. • VOLUME is set to the minimum position. • MUTE is ON. • The SPEAKERS switches are set to OFF. • Speaker cords are short-circuited. • The speaker cord is disconnected. • The speaker is not set up correctly.
31 EN ENGLISH In case of difficulty Remote control unit Cause • The remote control is set to a different operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote.
32 EN ENGLISH Specifications Caution : Read this page carefully to ensure safe operation. AUDIO section Rated power output during STEREO operation DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω ) .....................................................
デバイスKenwood KRF-V5080Dの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KRF-V5080Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KRF-V5080Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KRF-V5080Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KRF-V5080Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KRF-V5080Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KRF-V5080Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KRF-V5080Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KRF-V5080Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
