KenwoodメーカーKRF-X9050Dの使用説明書/サービス説明書
ページ先へ移動 of 52
Operations Preparation Additional Information Remote Control AUDIO VIDEO SURROUND RECEIVER KRF-X9050D B60-4958-00 00 MA (M, Y, T, I, X) 0011 About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes.
2 Preparations This unit is designed for operation as follows. U.S.A. and Canada ........................................... AC 120 V only Australia ........................................................... AC 240 V only Europe and U.K. ............
3 Operations Preparations Remote Control Additional Information Before applying the power Maintenance of the unit When the front panel or case becomes dirty , wipe with a soft, dry cloth. Do not use thinner , benzine, alcohol, etc. for these agents may cause discoloration.
4 Preparations Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
5 Preparation Names and functions of parts & SOURCE DIRECT key ¢ Use to pass the source material direct to the amplifier. * INPUT SELECTOR knob £ Use to select the input sources.
6 Preparations 8 DISC SEL. key Use to opeate other components. 9 DISC SKIP key If CD is selected as the input source, this key functions as the multi-CD player disc skip key. A/B key If TAPE is selected as the input source, this is (A and B) of a double cassette deck.
7 Preparation If CD, MD or TAPE is selected as the input source, these keys function as search keys. 9 DISC SEL. key Use to opeate other components. 0 DISC SKIP key If CD is selected as the input source, this key functions as the multi-CD player disc skip key.
8 Preparations Make connections as shown on the following pages. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
9 Preparations Connecting audio components To AC wall outlet SYSTEM CONTROL jacks ( When you connect the unit and the CD or MD player with the digital connection, you can enjoy a better sound quality.
10 Preparations Connecting video components Setting up the system A video component with digital audio outputs should be connected to the VIDEO2 or VIDEO3 jacks. About the S VIDEO jacks Use the S VIDEO jac ks to make connections to video components with S VIDEO IN/OUT jac ks.
11 Preparations L RL VIDEO 3 VIDEO 2 VIDEO 1 S VIDEO R A LC L R L R B PLAY IN PLAY IN PLAY IN REC OUT PLAY IN MONITOR OUT VIDEO 1 DVD R 75 µ s AM 10kHz FM 100kHz 50 µ s AM 9kHz FM 50kHz DE- EMPHASIS.
12 Preparations L RL VIDEO 3 VIDEO 2 VIDEO 1 S VIDEO R A LC L R L R B PLAY IN PLAY IN PLAY IN REC OUT PLAY IN MONITOR OUT VIDEO 1 DVD R 75 µ s AM 10kHz FM 100kHz 50 µ s AM 9kHz FM 50kHz DE- EMPHASIS.
13 Preparations Setting up the system Connecting a DVD player (6-channel input) FRONT OUT L/R S VIDEO OUT COAXIAL DIGITAL OUT (AUDIO) DVD player S VIDEO cord SURROUND OUT L/R VIDEO OUT (Yellow RCA pin.
14 Preparations Setting up the system Right Front Speakers A Left Right Use the FRONT SPEAKERS B terminals if you want to connect a second front speaker system.
15 Preparations Setting up the system Connecting the terminals 1 Strip coating. 2 Push the lever. 3 Insert the cord. 4 Return the lever. 1 Strip coating.
16 Preparations Connecting to another room or area (ROOM B) This connection allows you to connect your main system to a monitor TV and speaker system located in another room or area (ROOM B).
17 Preparations PRE OUT connections This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below. • Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.
18 Preparations Setting up the system • To select the source connected to the AV AUX jacks, select AV AUX by using the INPUT SELECTOR knob. £ • When you connect the audio source such as the MD player, you do not need to connect the video cable.
19 Preparations Setting up the system Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. This unit is compatible only with the [SL-16] mode.
20 Preparations Channel space switching (Except for the USA, Canada, UK, Europe, and Australia) The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
21 Preparation Preparing for surround sound 4 Use the MULTI CONTROL knob or keys to select the appropriate front speakers setting. 1 NML/THX (normal) : Average size front speakers are connected to the receiver. 2 LRG (large) : Large front speakers are connected to the receiver.
22 Preparations 4 5 Adjust the speaker volume. From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same. 1 Use the MULTI CONTROL knob or keys to adjust the volume of the test tone output from the speaker channel to be adjusted.
23 Preparing for playback Some preparatory steps are needed before starting playback. Selecting the input mode If you have selected a component connected to the CD/DVD, DVD/6ch, VIDEO2, or VIDEO3 jacks, make sure that the input mode setting is correct for the type of audio signal to be used.
24 Operations Normal playback Adjusting the sound Adjusting the tone You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 1 Press the SOUND key repeatedly to select the tone mode to be adjusted. BASS: Select this to adjust the low frequency range.
25 Operations 1 Use the INPUT SELECTOR knob to select the source (other than “TAPE”) you want to record. 2 Set the cassette deck or MD recorder to record. 3 Start playback, then start recording. Recording audio (analog sources) Recording Recording a music source 1 Press the MONITOR key.
26 Operations Listening to radio broadcasts 1 2 3 Each press switches the tuning method as follows: 4 Auto tuning : The next station is tuned automatically.
27 Operations Receiving preset stations in order (P.CALL) • Each time you press the key, another preset station is received in order. Pressing the ¢ key does the following: = 01 = 02 = 03 = … = .
28 Operations 1 2 3 This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function. Use the INPUT SELECTOR knob to select the tuner.
29 Operations Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
30 Operations Home THX Cinema THX is a creation of Lucasfilm Ltd., which practically brings the cinema sensation to your home with its superb multichannel digital audio program. This system promises a reproduction of an enthralling home experience, which is able to encompass smaller space with fantastic audio output.
31 Operations Ambience effects Center speaker DVD 6-channel mode Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy multi-channel encoded DVD source material in all its splendor.
32 Operations Surround Play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software bearing the mark.
33 Operations Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. When you try to play a disc other than Dolby Digital such as DTS CD, no sound is produced or, noise may be heard.
34 Operations Ambience effects Midnight mode (Dolby Digital mode only) When watching movies at night you might not be able to raise the volume as loud as normal.
35 Remote Control The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Repeat steps 2 to 3 to register additional components until all components have been registered.
36 Remote Control < Maker > No. No. No. No. No. No. No. No. No. No. No. No. No. AKAI 0104 ADMIRAL 0112 0124 0126 AIWA 0138 0142 0143 AOC 0105 BROKSONIC 0104 0105 0144 0180 BELL & HOWELL 0124.
37 Remote Control < Maker > No. No. No. No. No. No. No. No. No. No. AKAI 0515 0516 0548 0549 0550 ALBA 0512 0515 0516 AUDIOSONIC 0515 0516 BAUR 0555 BLAUPUNKT 0548 0549 0550 BRANDT 0544 0545 BUS.
38 Remote Control < Maker > No. No. No. No. No. No. No. No. No. No. No. No. No. ABC 3124 ARCHER 3125 3132 CABLE VIEW 3105 3132 CITIZEN 3105 3122 CURTIS 3112 3113 DIAMOND 3124 3125 3132 EAGLE 3129 EASTERN 3134 GCBRAND 3105 3132 G.
39 Remote Control < Maker > No. No. No. No. No. No. No. No. No. No. No. No. No. ADMIRAL 1135 AIWA 1127 1132 1181 AKAI 1114 1115 1116 1129 AUDIO DYNAMIC 1111 1139 BELL & HOWELL 1105 1113 BROK.
40 Remote Control Basic remote control operations for other components < Maker > No. No. No. No. No. No. No. No. No. No. No. No. No. ADMIRAL 2135 AIWA 2127 2132 2181 AKAI 2114 2115 2116 2129 AUD.
41 Remote Control < Maker > No. No. No. No. No. No. No. No. AKAI 1505 1506 1515 1516 1522 1523 1526 1527 ALBA 1519 1520 1522 1523 BAIRD 1505 1506 1507 1508 BLAUPUNKT 1538 1541 1546 1547 1550 BUS.
42 Remote Control < Maker > No. No. No. No. No. No. No. No. AKAI 2505 2506 2515 2516 2522 2523 2526 2527 ALBA 2519 2520 2522 2523 BAIRD 2505 2506 2507 2508 BLAUPUNKT 2538 2541 2546 2547 2550 BUS.
43 Remote Control < Maker > No. No. No. No. APEX 5120 AIWA 5123 DENON 5100 5117 FERGUSON 5101 HITACHI 5111 JVC 5109 KENWOOD 5115 5129 MITSUBISHI 5105 NORDMENDE 5101 ONKYO 5121 ORITRON 5124 PIONE.
44 Remote Control Refer to the following for the type of remote control operations available for each component. Remote control operation of other components 1 Use the Input selector keys or source POWER keys to select the component you want to control.
45 Remote Control CD player operations Cassette deck operations Remote control operation of other components RC-R0714 RC-R0715 RC- R0714 RC-R0715 REMOTE CONTROL UNIT RC-R0714 123 POWER POWER 456 789 0 +10 BASS BOOST DIMMER TUNING REC M. BAND AUTO A/B +100 I NPUT SEL.
46 Remote Control TV operations MD recorder operations Remote control operation of other components RC- R0714 RC-R0715 RC- R0714 RC-R0715 REMOTE CONTROL UNIT RC-R0714 123 POWER POWER 456 789 0 +10 BASS BOOST DIMMER TUNING REC M. BAND AUTO A/B +100 I NPUT SEL.
47 Remote Control LD player operations VCR operations Remote control operation of other components RC- R0714 RC-R0715 RC- R0714 RC-R0715 REMOTE CONTROL UNIT RC-R0714 1 2 3 POWER POWER 4 5 6 7 8 9 0 +10 BASS BOOST DIMMER TUNING REC M. BAND AUTO A/B +100 I NPUT SEL.
48 Remote Control DSS/DBS receiver operations DVD player operations Remote control operation of other components RC- R0714 RC-R0715 RC- R0714 REMOTE CONTROL UNIT RC-R0714 123 POWER POWER 456 789 0 +10 BASS BOOST DIMMER TUNING REC M. BAND AUTO A/B +100 I NPUT SEL.
49 Additional Information In case of difficulty Resetting the Microcomputer The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor.
50 Additional Information Remote control unit Cause • Subwoofer is OFF. • The remote control is set to a different operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote.
51 Additional Information Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
デバイスKenwood KRF-X9050Dの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KRF-X9050Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KRF-X9050Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KRF-X9050Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KRF-X9050Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KRF-X9050Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KRF-X9050Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KRF-X9050Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KRF-X9050Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
