KenwoodメーカーKVT-911DVDの使用説明書/サービス説明書
ページ先へ移動 of 68
© PRINTED IN JAPAN B64-2253-00/01 (K)(DT) KVT -91 1DVD INSTRUCTION MANUAL TELEVISION WITH DVD RECEIVER Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Television with DVD receiver.
2 Contents Before Use ......................................................4 Monitor Control Function ....................................8 •Opening/ Closing the Monitor •Power Off •Switching t.
3 •Track Random Play Function •Selecting the Name or Title Display for Discs •To Scroll Manually •Selecting the Time Display •Switching to the Name Set Screen External Disc Control Function.
4 Before Use Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
5 Cleaning the disc slot As dust can accumulate in the disc slot, clean it occasionally. Your discs can get scratched if you put them in a dusty disc slot. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit.
6 Before Use Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 2 4 1 5 4 5 2 1 2 6 3 This player has been designed to play back the DVD software which has been encoded for specific region areas.
7 DVD: Digital Versatile Disc A type of disc which contains recording of audio/video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VIDEO CD (VCD) A type of CD which contains the recording of moving images.
8 Opening/Closing the Monitor Opening the Monitor Set the vehicle’s parking brake. Press the OPEN button. The monitor will open. Once the monitor is fully out, lift it by hand and set it to an easily visible angle. Closing the Monitor Set the lower the monitor so that it is completely flat.
9 E B " ON " Backlight brightness is automatically adjusted according the surrounding brightness as detected by the auto dimmer sensor of the monitor unit. " OFF " Backlight brightness is adjusted using the picture quality adjustment.
10 Source Icon change When there are more than 7 sources Items, [ ] is displayed. The selectable source icons are switched in order to touch [ ]. Switching to the Setup Screen Touch [ SET UP ] to switch the setup menu screen. <see p.11> Canceling the Menu Screen Touch [ ] t o switch to the control screen for the current source.
11 Switching the Setup Page Touch [ ∞ ] to switch to the next page. Touch [ 5 ] to switch to the previous page. If there is only one setup page it is not displayed. Canceling the System Setup Screen Touch this icon to return to the menu screen. NOTE Selecting to the DAB Tuner Setup Screen Touch [ DAB ] to switch the DAB Tuner Setup Screen.
E G 12 System Setup Function <When the KDS-P900/P901 is connected> You can select whether to output AV-OUT sound from the rear or from the front. Don’t turn the Dual Zone system ON if discs are played that were recorded by DTS. If it is set ON, the disc’s sound won’t be output.
13 Demonstration Function Each time you touch [ DEMO ], the mode switches as follows: " ON " The graphic screen’s background mode switches repeatedly.
B 14 Clock Adjustment Function Setting the Minutes to "00" Touch [ RESET ] to set the minutes to "00". Touch [ RESET ] whilst the minute is below "30" rounds it off, and whilst the minute is "30" or more rounds it up.
15 KVT_911DVD_Eng_01 02.1.25 2:24 PM Page 15.
A 16 DVD,VCD Setup Function B Setting the Priority Language for Voice Set the audio language produced from the speakers. Touch [ Audio ] to switch the language select screen. <see p.18> The language selected in the initial setup is used immediately after turning power on or replacing disc.
17 PBC(Playback Control) Function On/Off for VCD version 2.0 Each time you touch [ PBC ], the mode switches as follows: " ON " PBC function is turned on " OFF " PBC function is tur.
A 18 DVD,VCD Setup Function Inputing the Language Code Touch [ a ] - [ z ] and input the language code. If you enter the wrong letter, touch [ Clear ]. The last entered letter is cleared. Returning to the Original Language <Audio language only> Touch [ Original ] or to return to the original language.
19 aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha hi hr hu hy ia ie ik in is it Afar Abkhazian Afrikaans Amharic Arabic Assa.
A 20 DVD,VCD Setup Function Setting the password Touch the number [ z ] - [ / ] and enter your password ( 4-digit ). Input numbers are displayed “*”. If you enter the wrong number, touch [Clear]. The entered number is cleared. Touch [ Enter ] . • Registered number can be used as a password.
21 Adjusting the Touch Position The touch panel can be adjusted if the position touched and the operation performed do not match. Accurately touch the mark at the lower left. Accurately touch the mark at the upper right. When the mark at the upper right is touched, the adjustment is completed and the system setup menu screen reappears.
22 Code Security Function A A If you press the RESET button or remove the battery: The first time you turn the unit on again," 1st " and will appear in the display, asking you to input the security code. Repeat steps 4 and 5 above, and input the security code.
A D Operating the Buttons for Basic Function 23 Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play Hold down on the 4 button. Release your finger to play the disc at the point.
24 Basic Operation for Source Control Scr een Switching to the Graphic Screen The necessary minimum limit screen. The screen display pattern (graphic pattern) can be switched on this screen. Touch centre source icon to switch to the graphic screen. Refer to page 42 for the graphic screen operation.
TV Control Function on the TV pictures 25 Displaying the TV Picture Press the V.SEL button.(see page 8) Selecting the Preset Bands Each time you touch the upper center part, the preset band switches between the TV1 and TV2. Selecting the Channels Auto Seek Mode (AUTO1) • Touch the right side part to seek for channels up the band.
26 TV Control Function D Station Preset Memory Store the channel of the station currently being look to. You can then recall that channel with a single touch of a button. Select the band/ station that you want to store. Hold down preset channel number [ P1 ] - [ P6 ] on which you want to store the channel, for two seconds or more.
27 You cannot operate unless the parking brake is set. Switching the List Each time you touch [ ] or [ ] , the list switches between the TV1 and TV2 bands. Recalling a Preset channel Touch the preset station number [ 1 ] - [ 6 ] for the desired channel.
28 FM/AM T uner Control Function E Station Preset Memory Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. Select the band/station that you want to have stored. Hold down preset station number [ 1 ] - [ 6 ] that you want to use for the station, for two seconds or more.
29 Switching to the FM/AM List Screen Touch [ LIST ] to switch to the FM/AM list screen. Switching the Band List Each time you touch [ ] or [ ] , the list switches between the FM1, FM2, FM3 and AM bands. Switching the SNPS and PS Name Each time you touch [ SNPS ] or [ PS ] to the list switches between the SNPS and PS name.
30 FM/AM T uner Control Function B Turning TI function On/Off You can listen to traffic information. If you are listening to discs, they will continue playing until a traffic bulletin is broadcast. Press the [ TI ] button to turn the function on and off.
31 A A Registration of a station as a PTY You can register a station as a program type. Tune your radio to the non-RDS station that you want to register as the program type. Touch either [ ] or [ ] repeatedly to select the type of program lists you want to listen to.
32 DVD/VCD Control Function on the Pictures C Selecting the item Touch [ % ],[ fi ],[ @ ],[ # ]. Setting the item Touch [ ENT ]. Returning to the menu Touch [ RTN ]. • The display, operation method and usable keys of the menu screen are variable depending on software.
33 Viewing Zoom 1/4 of the image can be zoomed and viewed. Touch [ ZOOM ] to display the zoom control screen. Zooming the image Each time the [ ZOOM ] is touched the image switches between zoom ( ON ) and normal ( OFF ). Scrolling the image When you touch [ @ ], [ # ], [ % ] or [ fi ], the image scrolls in the direction of the touched arrow.
34 DVD/VCD/CD Cont r ol Function to 1/2 times( x 2) to 1/3 times( x 3). • Reverse slow playback is not available with a VCD. Pausing and Restarting Disc Play Touch [ 38 ] to make the disc pause. Touch [ 38 ] again to start play again. The following operation may not be available with certain discs.
35 Track Scan Function Successively play the beginning of each track on a disc until you find the one that you want to listen to. Turning Track Scan Function On/Off Touch [ SCN ] to switch the track scan function on and off. The SCN indicator is displayed when the track scan function is turned on.
36 DVD/VCD/CD Control Function G Selecting the Name or Title Display for Discs Each time you touch [ D ], the display during disc play switches as follows: ▼ Disc name ▼ Disc text ▼ Track text • You can give names to discs through the presetting disc name function.
External Disc Control Function 37 F A Track Scan Function Successively play the beginning of each track on a disc until you find the one that you want to listen to. Turning Track Scan Function On/Off Touch [ SCN ] to switch the track scan function on and off.
38 External Disc control Function L When the disc/track has been selected, play starts. To change the track being heard, touch [ ¢ ]. Another disc/track is selected and played. • Random play is canceled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine.
39 Switching to the Name Set Screen (Function of CD player/ CD changers) Touch [ ] for at least two seconds to switch to the name set screen.(see P.40) You cannot operate unless the parking brake is set. Switching to the Disc List Screen Touch [ LIST ] to switch the disc list screen.
40 Name Set Function Station Name Preset (SNPS) /Disc Name Preset (DNPS) If the cursor is in the desired character input position, go on to step 4. If not touch either [ 2 ] or [ 3 ] to move the cursor to the desired position. Touching [ 2 ] moves the cursor to the left and touching [ 3 ] moves it to the right.
Other Source Control Function 41 B Weather Band Tuner Control Screen <Refer to the KTC-WB100 instruction manual for details on weather band tuner functions> Sensor Box Control Screen <Refer t.
Graphic Screen Function A Touch the part G Touch the part G to return to the source control screen . When you drag in the direction of A Increase the volume. When you drag in the direction of B Decrease the volume. When you drag in the direction of D • In TV,FM/AM tuner mode Seek up.
Sound Effect Menu Function 43 Switching to the Audio Control Screen Touch [ Audio ] to switch to the Audio Control Screen (Page 44). Switching to the Crossover Network Setting Screen Touch [ X'OVER ] to switch to Crossover Network Setting Screen (Page 46).
44 Audio Control Function A Adjusting the Fader Levels • Each time you touch [ ](F), the sound in the front channel emphasized. • Each time you touch [ ](R), the sound in the rear channel emphasized. Turning the Loudness On/Off This function amplifies low and high tones when the volume is turned down.
45 Setting the Speaker Type Using this function to set the diameter of the speaker optimizes the sound quality to the speaker diameter. Each time you touch [ SP ] to select the speaker type as follows.
46 Audio Control Function A Adjusting the High-pass filter for Rear output Adjust the frequency of the High-pass filter Each time you touch [ ] or [ ] to adjust the frequency as follows: THR (through).
5.1 Channels Surround Pr ocessor Control Function 47 F I E H G D B A C Digital Effect Setting Screen Selecting the Dynamic Range Select the dynamic range for Dolby Digital sound. Each time you touch [ D-Range ], the dynamic range switches as follows: " Standard " For more powerful sound at regular volumes.
48 5.1 Channels Surround Pr ocessor Control Function Selecting the Position Mode Touch [ ALL ], [ Front R ], [ Front L ], [ Front ] or [ Rear ], the listening position will be switched as follows: &qu.
49 •You cannot operate when the “Center SP“ is set to "OFF" ( see P 47 ) <When playing with multi-channels>. •You cannot operate when the “Multi channel“ is set to “2/2“ or “2/0“ ( see P 47 ). Returning to the Sound Effect Menu Screen Touch [ RTN ] to return to the sound effect menu screen.
50 5.1 Channels Surround Pr ocessor Control Function H F A B D C E G Adjust the slope Each time you touch [ ] or [ ] to adjust the slope (12dB, 18dB and 24dB).
51 E Adjusting the Sub Woofer Touch the [ ] or [ ] to adjust the delay time for non-fading output. You cannot operate when the “Sub Woofer“ is set to "OFF" ( see P 47 ). Ending to the Delay Time Setting Screen Touch [ RTN ] to return to the crossover network screen.
52 5.1 Channels Surround Pr ocessor Control Function A Recalling the Kenwood Preset Sound Each time you touch [ 2 ] or [ 3 ] , the preset sound setting switches between the “FLAT“, “POPS“(TOP40), “ROCK“, “DANCE“, “VOCAL“ and “CLASSIC“.
Returning to the Source Control Screen Touch [ RTN ] to return to the Source Control Screen. Adjusting the Balance Levels • Each time you touch [ ], the sound in the left channel is emphasized. • Each time you touch [ ], the sound in the right channel is emphasized.
54 Remote Control Function 3 Switching the Audio Source Mode <TV/AUD position> Each time you press the [ SRC ] button to switch the audio source mode. 3 Volume <TV/DVD/AUD position> Each time you press the VOL button to 5 side to increase the volume.
55 3 Pausing and Restarting Disc Play • Press the Joystick to make the disc pause. • Press the Joystick to start play again. 3 Manual Search Forward search Move the Joystick to front side.
56 Installation Accessories The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above.
57 1. To prevent short circuits, remove the key from the ignition and disconnect the · terminal of the battery. 2. Make the proper input and output cable connections for each unit. 3. Connect the wiring harness wires in the following order: ground, battery, ignition.
FM /AM ANTENNA AV INPUT AV INPUT L R L R 1 2 VIDEO VIDEO FRONT REAR PREOUT NON-FAD AV OUTPUT POWER TO MONITOR UNIT L R L R VIDEO LLL R R R ANT CONT P.CONT ILLUMI EXT.
FRONT L FRONT R REAR L REAR R TEL MUTE TO NAV .I/F TO ANTENNA TO 5L I/F TO MZ-BUS TO MONITOR A C ( 1A ) ( 1A ) 30R DIGIT AL IN TV/DVD TO MZ-BUS 59 White/Black Gray/Black Green/Black Purple/Black White.
60 Installation TO NAV .I/F TO ANTENNA TO 5L I/F TO M Z-BUS TO MONITOR ] "N" O - N Connection for AV Equipments Only connect black cable to TO 5L interface. Connection of light-brown connecting cable (for NAV interface use) can result in failure.
61 When two CD/MD changers are interconnected The disc changers are distinguished by source select disc-changer 1 and disc-changer 2. If the relevant connected device has a PROTOCOL SWITCH or O-N SWITCH, be sure to set the switch to “N”.
62 Installation Attach the installation brackets to the sides of the hideaway unit using the sems bolts (M4 × 8 mm). Use the tapping screw (ø4 × 16 mm) to secure the hideaway unit to the audio board.
63 Removing Monitor Unit Removing the Hard Rubber Frame ■ Accessory J Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. When the lower level is removed, remove the upper two locations.
64 Installation Installing the Antenna Units • Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the installation location as the tape can only be stuck on once. • If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger.
Tr oubleshooting Guide 65 SOLUTION What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. POSSIBLE CAUSE PROBLEM Nothing happens when the buttons are pressed.
66 Tr oubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM External disc control mode The computer chip in the unit is not functioning normally. Press the reset button on the unit (see p. - 4). The disc control mode cannot be selected. No wire has been connected to the disc changer input terminal on the unit.
67 The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation.
Specifications Specifications subject to change without notice. Monitor Section Picture size............................................6.5 inches wide 142.6(W) × 80.7(H) mm Display system ....................Transparent TN LCD panel Drive system ...
デバイスKenwood KVT-911DVDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KVT-911DVDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KVT-911DVDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KVT-911DVDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KVT-911DVDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KVT-911DVDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KVT-911DVDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KVT-911DVDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KVT-911DVDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
