KenwoodメーカーVZ-7000Pの使用説明書/サービス説明書
ページ先へ移動 of 28
© PRINTED IN JAPAN B64-2084-00 (M/H)(+) 03/12 11 10 9 8 7 6 5 4 3 2 1 02/12 11 10 9 8 7 6 5 4 3 VZ-7000P VZ-7000N INSTR UCTION MANU AL 7-Inch WIDE TELEVISION C-01177(M/H)-Cover_Eng 02.
English 2 Contents Before Use Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Monitor Control Function • Opening the Monitor . . . . . . . . . . . . . . . . . . . . . . . .5 • Closing the Monitor . . . . . . . . . . . . .
English 3 Tape Player Control Function Tape Player Control Screen • Listening to the Other Side . . . . . . . . . . . . . . . . . .20 • Direct Program Search System(DPSS) . . . . . . . . .20 • Fast Forwarding the Tapes . . . . . . . . . . . . . .
English 4 Safety Precautions To prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other cables with an area of 0.
English 5 Monitor Control Function Opening the Monitor Set the vehicle’s parking brake. Press the OPEN/CLOSE button. The monitor will open. The gear shift lever or other parts may interfere with the monitor when it opens. If so, move the gear shift lever (being sure to do so safely) before operating the set.
English 6 Monitor Control Function Switching the Screen Mode Each time you press the MODE button, the screen mode switches as follows: ∞ FULL : Full picture mode ∞ ZOOM : Zoom picture mode ∞ JUST : Just picture mode ∞ CINEMA : Cinema picture mode ∞ NORMAL : Normal picture mode Switching the AV Output Each time you press the V.
Adjusting the Picture Quality [BRT] Touch [ 3 ] for a brighter screen. Touch [ 2 ] for a darker screen. [TIN] Touch [ 3 ] for a stronger red level. Touch [ 2 ] for a stronger green level. [COL] Touch [ 3 ] for a deeper color. Touch [ 2 ] for a paler color.
English 8 System Setup Function Switching to the Setup Menu Screen Press the FNC button on the monitor. The source control screen is displayed (Page 13-22). Touch [ MENU ] to switch to the setup menu screen. Switching to the AV Setting Screen Touch [ AV SET ] to switch to the AV setting screen ( Page 8) .
English 9 Setting the Touch Sensor Tone [TV BEEP] Touch [ ON ] or [ OFF ] to switch the function on and off. [ 7 ON] : Touch sensor tone is turned on [ 7 OFF] : Touch sensor tone is turned off Setting the On Screen Display Function [AUTO ON SCREEN] Touch [ ON ] or [ OFF ] to switch the function between automatic and manual.
English 10 System Setup Function FM Transmitter Function On and Off If the Center unit is not connected, you can use the FM transmitter function to hear the audio from the TV, video played from your car FM radio. Touch [ ON ] or [ OFF ] to switch the FM transmitter function on and off.
English 11 Setting of the switching mode of input video signal types This function switches between the automatic detection and the fixed detection for input signal types of VIDEO1 and VIDEO2.
English 12 System Set Up Function Adjusting the Touch Position The touch panel can be adjusted if the position touched and the operation performed do not match. Accurately touch the mark at the upper right. Accurately touch the mark at the lower left.
English 13 TV Control Function Selecting the TV Preset Bands Touch [ TV ] to select the TV preset band. Each time you touch [ TV ], the preset band switches between the TV1 and TV2. Selecting the Video Input Touch [ VD ] to select the video input. Selecting the Channels Auto Seek Tuning (AUTO1) Touch [ ¢ ] to seek for channels up.
English 14 TV Control Function Auto Memory Entry You can automatically store all the receivable channels in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available.
Name Set If the cursor is in the desired character input position, go on to step 4. If not, touch either [ 2 ]o r [ 3 ] to move the cursor to the desired position. Touching [ 2 ] moves the cursor to the left and touching [ 3 ] moves it to the right. Touch [ ∞ ] or [ 5 ] to switch the character lists.
English 16 TV Control Function Selecting the Channels on the TV Picture Screen Touch the left part to decrease the channel Touch the right part to increase the channel If the lower center of the screen is touched while a TV/video picture is displayed, the audio source, picture settings, video out settings, etc.
English 17 FM/AM T uner Contr ol Function During the PTY mode, “PTY SEARCH MODE” is displayed. Selecting the Bands Touch either [ FM ] or [ AM ] to select the band. Each time you touch [ FM ], the band switches . Touch [ AM ] to select the AM band.
• Some keys are disabled depending on the functions of a unit connected. • When a slave CD player plays a disc, the information display such as playing time and track No. is not displayed. Pausing and Restarting CD Play Touch [ 38 ] to make the disc pause.
English 19 MD Player Control Function Some keys are disabled depending on the functions of a unit connected. Pausing and Restarting MD Play Touch [ 38 ] to make the disc pause. Touch [ 38 ] again to start play again. Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to.
English 20 Listening to the Other Side Touch [ 23 ]. Tape play switches to the other side. Direct Program Search System(DPSS) Skip backward and forward to other tracks during playback. Skipping to the Beginning of Current Track or to Previous Tracks (Rewind DPSS): Touch [ 4 ].
English 21 Disc Changer Control Function Pausing and Restarting Disc Play Touch [ 38 ] to make the disc pause. Touch [ 38 ] again to start play again. When one disc has finished playing its last track, the next disc in the changer starts playing.
English 22 DAB Control Function Selecting the Bands Each time you touch [ BAND ], the band switches between the DAB1, DAB2 and DAB3. Switching Service Touch [ ¢ ] to switch the service in the Ensemble one after another. Touch [ 4 ] to switch the service in the reverse order.
English 23 3 TV Control Function (Operation available when the TV audio source is selected.) • 38 button Each time you press the 38 button, the tuning mode switches to auto 1, to auto 2 and manual. • TUNE buttons Press the 4 button to make decreasing seeks.
English 24 3 FM/AM Tuner Control Function • TUNE buttons Press the 4 button to make decreasing seeks. Press the ¢ button to make increasing seeks. • FM+ button Select the FM bands. • AM– button Select the AM band. 3 Disc Changer Control Function • 38 button Press the 38 button to make the disc pause.
English 25 Tr oubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM Nothing happens when the buttons are pressed.
English 26 Specifications Specifications subject to change without notice. Monitor Section Picture size ..................................................................................................7.0 inches wide ( 154.1 mm × 87.0 mm) Display system .
C-01177(H)-Eng 02.3.20 3:12 PM Page 27.
C-01177(H)-Eng 02.3.20 3:12 PM Page 28.
デバイスKenwood VZ-7000Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood VZ-7000Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood VZ-7000Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood VZ-7000Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood VZ-7000Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood VZ-7000Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood VZ-7000Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood VZ-7000Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood VZ-7000Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
