KodakメーカーDVD7000の使用説明書/サービス説明書
ページ先へ移動 of 41
DVD7000 User's Manual DVD Player MP3 PLA YS K odak Picture CD COMPATIBLE DIGIT AL SURROUND.
Content Introduction Trouble Shooting ........................................................................................................... Specifications ..........................................................................................
Safety Precautions Introduction THE LIGHTNING FLASH WITH AR- ROWHEAD SYMBOL WITHIN AN EQUI- LATERAL TRIANGLE IS INTENT TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Caution Introduction 4 When you repackage this product. Do not place this product near the volatile liquid such as insecticide. It is normal for the cover and rear panel become warm after the player has been operating for a long time. Do not move this product during playback.
DIGIT AL SURROUND Features Introduction Dual Decoding: Dolby Digital AC-3 and DTS Decoding Full compatibility with DVD, SVCD, VCD, CD, MP3, and Kodak picture CD on CD-RW & CD-RW (finalised) Screensaver Multiple playback modes: Memory, Program, Search, 10-Second Review Dynamic spectrum display and 6 frequency bands adjustable 5.
6 Front panel and Rear panel illustrations Introduction Front panel Rear panel fast backward mic jacks volume control stop menu fast forward power disc tray play/pause open/close previous VFD next arr.
7 VFD Illustrations Introduction The figure above shows the front panel with all the displays on. 1. DVD indicator 2. DTS indicator 3. SVCD-VCD indicator 4. DOLBY indicator 5. Multi-angle indicator 6. PBC indicator 7. MP3 indicator 8. Time indicator 9.
8 Remote Control Introduction.
9 Connecting to a TV Set Connections Notes: Set player's Analog Out mode to "2 Channel" in the audio setup page. (See page 17) There are three ways of connecting the player's AV output to the TV set. 1. S-video cable and left/right audio cable.
10 Notes: 1. Set player's Analog Out mode to "2 Channel" in the audio set up page (See page 17). 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected.
11 Notes: 1. Set player's Analog Out mode to "5.1 Channel" in the audio set up page (See page 17). 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected.
12 Notes: 1. Set player's Digital Out mode to "PCM" or "Raw" in the audio set up page (See page 18). 2. Set either the Optical or the Coaxial digital audio output. 3. Set the amplifier to the AV input connected to the DVD player.
13 Basic Operation Basic Playback Preparation before playing: 1. Connect your DVD player to the TV and amplifier. 2. Turn on the TV. 3. Set the TV to the AV input connected to the DVD Player. 4. Turn down the volume on your amplifier, then power it on.
1. Select [OSD Menu], and press ENTER or to display the [OSD Menu] submenu: 5 14 Advanced Features Modes and Features Setup ON SCREEN DISPLAY (OSD)/SETUP In stop mode, press OSD/SETUP , and the TV scr.
5. Select [OSD], and press ENTER or to display the [OSD] submenu: 3. Select [DVD Audio], and press ENTER or to display the [DVD Audio] submenu: 2. Select [DVD Subtitle], and press ENTER or to display the [DVD Subtitle] submenu: 15 Advanced Features Modes and Features Setup Language Setup Note: Subtitle languages vary by disc.
2. Select [Video], and press ENTER or to display the [Video] submenu: 1. Select [TV Aspect], and press ENTER or to display the [TV Aspect] submenu: 16 Advanced Features Modes and Features Setup Video Setup Select [Video] in the Setup Menu, and press ENTER to display the [Video] submenu: A.
1. Select [DTS Setting], and press ENTER or to display the [DTS Setting] submenu: Audio Setup 3. Select [Video Type], and press ENTER or to display the [Video Type] submenu: 17 Advanced Features Modes and Features Setup Video Setup A. Press ENTER or to setup.
3. Select [Digital Out], and press ENTER or to display the [Digital Out] submenu: Audio Setup 18 Advanced Features Modes and Features Setup A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu. A. Press to change your selection.
Press to select the menu item. Rating Setup 19 Advanced Features Modes and Features Setup Press to select the menu item. A. Press ENTER or to setup. B. Press RETURN or to return to the Setup Menu Select [Rating] in the Setup Menu, and press ENTER to display the [Rating] submenu: Unlocked 1.
A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu. Press to select the menu item. 20 Advanced Features Modes and Features Setup A. Press ENTER or to setup. B. Press RETURN or to return to the Setup Menu Other Setup Items 1.
21 Advanced Features Remote Control Operation During DVD playback, press TITLE to display the DVD title menu, or play from the first title. Note: This function is subject to the disc. During DVD playback, press MENU to display the menu of the current title.
5 22 Advanced Features Remote Control Operation During playback, press OSD/SETUP key to display the current time of the disc playing. Remain time of the current track/chapter current track/chapter Elapsed time of the Press OSD/SETUP again to display the additional information of the disc playing.
23 Advanced Features Remote Control Operation During DVD, CD or VCD playback, press NEXT/FWD key to play the next chapter, title or track. During DVD, CD, VCD, playback, press and hold NEXT/FWD to to scan forward. The player will cue the disc at 2, 4, 8 and 20 times of the normal speed as the follows: Press PLAY to resume normal playback.
24 Advanced Features Remote Control Operation Use the number keys to input the desired [Time], [Relative-Time] or [Title/Chapter] then press ENTER to confirm. Notes: 1. During CD playback, press SEARCH to display the [Track Search] menu, and press it again to display the [Disc Search] menu.
25 Advanced Features Remote Control Operation Press CLEAR key to delete the number you have entered. Press once to delete one digit, Press and hold to delete all digits. CLEAR PAUSE/STEP Press PAUSE/STEP during playback to pause playback. Press PAUSE/STEP again to step forwards one frame.
Advanced Features Remote Control Operation 26 During disc playback, press MEMORY bookmark the current the disc position. Press MEMORY again to play the disc from the bookmaked position. (this also clears the bookmark so that you can set a new one). Note: The bookmark will be saved even if the player is powered off.
Press to change your selection Press to change your selection. Advanced Features Remote Control Operation Press PLAY MODE to display the [Play Mode] menu: Press to change the items 1. Select [Repeat], and press ENTER or to display the [Repeat] submenu: A.
3. Select [PBC], and press ENTER or to display the [PBC] submenu: (PBC, or playback control, provides advanced track selection options during VCD playback). Advanced Features Remote Control Operation 28 While [Program] is on, press ENTER to display the [Program] submenu: Input the track numbers in the order you would like them to play.
Advanced Features Remote Control Operation 29 ENHANCE The Timer feature allows you to automatically power off the player after a specified length of time (up to 99:59:59). If not to input, pleas press ENTER key ,the timer function is disabled. The time remaining until the power is turned off is shown here.
Volume Setup Volume Channel Setup Channel Mix 24 VOL 30 Advanced Features Remote Control Operation Press CHANNEL , and the [Channel Setup] menu will display as follows: Press ENTER repeatedly to change the selection. Stereo Left Right When Karaoke is off: When Karaoke is on: You can change four channel modes: Stereo/Left/Right/Mix.
31 Advanced Features Remote Control Operation ZOOM During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. ANGLE 27 During DVD playback Press SUBTITLE repeatedly to select from up to 32 subtitle languages.
Enjoying Karaoke Function Illustrations 32 KARAOKE Press KARAOKE key, the screen will display as the following: Note: When Karaoke is off, press KARAOKE key, and Karaoke will be on. When Karaoke is on, press KARAOKE key, and Karaoke will be off. Set the player as the following, then you can enjoy Karaoke.
33 MP3 Playing Advanced Features Press to select the file when the cursor appears in the file window. Press PLAY to play the current file selected by cursor in the file window. Press to switch between the directory window and the file window. Note: During MP3 playback, PREV/REV and NEXT/FWD are not available.
Press key -- Invert/Normal OSD display 1/4 Press key -- Mirror/Normal OSD display 3/4 ,press it again to resume normal. Press key -- Turn left OSD display 2/4 ,press it again to resume normal. Press key -- Turn right OSD display 4/4 ,press it again to resume normal.
35 KODAK Picture CD Playback Function Illustrations Digest function Press the MENU key to display up to 12 pictures at a time. Press the arrow keys to select any picture displayed on the screen, then press the PLAY key. The selected picture will zoom in and start slideshow transitions.
REMOTER IS INSENSITIVE OR DOES NOT WORK Check the batteries of remoter and make sure that they are to be powerful and good conductivity. Direct the remote controller to the IR sensor of the player. Check whether there are some obstacles between the remoter and IR sensor.
Power requirements: 110-240V 50/60Hz Power consumption: 25W Video Standard: Auto Unit Weight: 2.9 kg Unit Dimensions: 430mm (W) x 260mm (D) x 65 mm (H) Audio out Analog out: 1.
2 38 Remote Control Preparation Other 1. Open the cover. 2. Insert batteries. Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 3. Close the cover. Point the remote control at the remote sensor.
To prevent children from watching programs which have a rating above their age, please be sure to set the rating in the set up menu appropriately. Before you set this rating, the password must be unlocked. If you forget your unique password, then please use the universal password as set by the manufacturer.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
デバイスKodak DVD7000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Kodak DVD7000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKodak DVD7000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kodak DVD7000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kodak DVD7000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kodak DVD7000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKodak DVD7000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kodak DVD7000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKodak DVD7000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。