KompernassメーカーKH5001の使用説明書/サービス説明書
ページ先へ移動 of 20
UK KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www .kompernass.com ID-Nr .: KH5001-07/07-V1 IB_KH5001_UK 09.07.2007 15:37 Uhr Seite 1.
Analogue comfort telephone KH5001 Operating Manual IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 2.
KH 5001 IB_KH5001_UK 09.07.2007 15:38 Uhr Seite 3.
2& 2! 2@ 2* 2( 2# 2$ 2% 2^ 118mm 3) 2* IB_KH5001_UK 09.
Analogue Comfort T elephone with hands-free function e-bench KH 5001 T able of contents Keep this manual for future reference and pass it on with the equipment to any future users. 1. Intended Use 4 2. T echnical Data 4 3. Package contents 4 4. Safety Instructions 4 5.
- 4 - e-bench KH 5001 T elephone KH5001 1. Intended Use The product is intended: • for connecting to P ABX phone lines and for directly connecting to the analogue Public Switching T elephone Network (PSTN) lines. • private use. This product is not intended: • for connecting to digital phone lines (e.
- 5 - • Do not allow individuals (including children) to use the appliance whose physical, sensorial or mental abilities or lack of experience and knowledge hinder their safe usage of it if they have not previously been supervised or instructed in its correct usage.
- 6 - e-bench KH 5001 2^ Calling Phone Book / Saving settings 2& T AE connecting cord 2* Battery compartment 2( Adjusting Ring tone volume 6. Connecting If you have carefully read through the safety instructions, you may now connect the phone: a) Connecting the receiver • Insert the spiral cord connectors into the narrow sockets.
- 7 - t Press the button, till the desired language appears in the display window . 2^ Press the button, to save the selected setting. If this function is not presented automa- tically – or , if you wish to once again call this function at a later point of time: This can be done through the program- ming mode as described under Section 8.
- 8 - b) Adjusting the display contrast If you have called the programming mode, ... 2@ press the button repeatedly till the text "SET LCD CONTRAST" is displayed. t press the button to change set value according to your personal preference.
- 9 - e) Setting the dial tone code Is your telephone connected to a P ABX? If not, you can skip this item. If, however , a dial tone needs to be requested first, you can set the dial tone code here. This will be automa- tically prefixed after selecting a call number from the memory by pres- sing the button twice (see also Section 9f).
- 10 - a For saving the changes and to termi- nate the function, press the but- ton twice. When you press the button once the text "LINE IN USE" is displayed: If you press it again, the phone is again rea- dy for operation.
- 11 - c) Adjusting the receiver volume 1* Using the slider on the receiver, you can adjust the receiver volume . There are two levels (MIN / MAX) available here. y With the receiver on the hook press the button , to set the ringing volume to one of four levels.
- 12 - In the case of the function described above, the phone will dial immedia- tely . Y ou need not pick up the recei- ver first or press the button. The Local Code can be prefixed from the memory functions (Phone Book, Dialled list and T arget dial memory).
- 13 - t use the button to select the function "EDIT ". • When the text "PLS INPUT NAME" is displayed, you can use the key pad to enter letters : – Press the required digit button repeatedly till the letter under the digit is displayed in the display window (e.
- 14 - o) Deleting Phone Book entry If you see the Phone Book entry in the display window as described under m), .... 2# hold the button pressed till the text "ERASED" is displayed. Y ou can change the Phone Book entries by deleting them as described above and by saving a new entry .
- 15 - s Hold the button pressed when the receiver is on hook, till the text "SET ALARM TIME" is displayed and the digit for hours starts blinking. t press the buttons to change the set digit. s press the button again till the digit for minutes starts blinking.
- 16 - To delete a single entry in the display... 2# Press the button briefly T o delete the entire list... 2# Hold the button pressed for mo- re than 3 seconds. In this operation, entries in the dialling list with a VIP flag will not be deleted. T o delete a VIP flag .
- 17 - Battery disposal! Batteries may not be disposed of with normal domestic waste. All consumers are statutorily obliged to dispose of batteries at the collection point in their community/district or with the original supplier .
alarm 4-5, 14-15 automatically 7-15 baby call 15 batteries 4, 6-7, 16 busy 12 call list 4-5, 7, 12-15 call number 9, 11, 14 Call waiting 11 Caller ID 8 contrast 8 Date / T ime 8 Day 8 DIAL IN PULSE 10.
デバイスKompernass KH5001の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Kompernass KH5001をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKompernass KH5001の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kompernass KH5001の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kompernass KH5001で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kompernass KH5001を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKompernass KH5001の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kompernass KH5001に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKompernass KH5001デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。