Konica MinoltaメーカーIP-411の使用説明書/サービス説明書
ページ先へ移動 of 241
P r i n t C o n t r o l l e r IP-411 User's Guide.
© 1999 by Konica Business T echnolo g ies, Inc. Ackn owledgments All brands and product names are trademarks or re g ister e d tr ademar ks of their r espective companies.
iii e l c o m e t o K o n i c a' s n e w p r i n t c o n t r o l l e r . This new print contr oller is an image pr ocessing de vice that interfaces with your K onica pr inter main body , enabling you to pr int dir ectly fr om y our workstation.
iv Definition of T erms DPI - Dots Per Inch The image resolution of the printer engine. Double-Buffering The embedded print controller is designed with an asynchronous connection between its Main CPU and the print engine.
v NONEXCLUSIVE LICENSE AGREEMENT READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULL Y . BY USING THE PRODUCTS DESCRIBED IN THIS USER MANUAL OR DOWNLOADING SOFT- W ARE OR PRINTER DRIVERS T O YOUR COMPUTER YOU AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE.
vi NONEXCLUSIVE LICENSE AGREEMENT (continued) 6. L IMITED W ARRANTY . Licensor warrants, for your benefit alone, for a period of 90 days from the date of commencement of this License Agreement (referr.
vii K onica IP-411 FCC Regulations The K onica IP-411 gener a tes, uses, and can radiate radio fr equenc y ener g y . If the equipment is not installed and used in accordance with the instruction manual, interfe rence with r adio communications may r esult.
.
Contents W elcome to K onica's Ne w Printer Contr oller .............................................................................. iii Definition of T erms ......................................................................................
Section 1: T he Print Contr oller.
The Print Controller 1-2 The Print Contr oller Introduction The print controller interfaces directly with your K onica pr inter main body , enabling you to pr int dir ectly from your PC or networ k. Please note tha t the netw ork interface manual is pro vided sepa rately for the networ k administrator .
The Print Controller 1-3 The Print Contr oller System Conf igura tion The Konica IP-411 Print Controller is an embedded control board for the K onica 7040/7033 Copier engi ne and is based on an IBM co.
The Print Controller 1-4 The Print Contr oller Media Support The Print Controller supports the follo wing paper dimensions and orientations through the pr inter's main body . USA (inches) T abloid-R (11 x 17) Legal-R (8.5 x 14) Letter -R (8.5 x 11) Letter (11 x 8.
The Print Controller 1-5 The Print Contr oller Layout KN-302 RJ-45 & LEDs Main Bod y Eng ine Rear V ie w P arallel Port Connector.
The Print Controller 1-6 The Print Contr oller I/O Interf aces V PostScript Interpreter Netwo rk Interf ace Card Controller Interf ace P a rallel Port PCL 5E Interpreter Input Buf fe r V V Ser ver Mac.
The Print Controller 1-7 Most of the print controller memory is used for rasterizing the image. A small por tion (~2.7 MB) is used for the system operation. The basic print controller configuration inc ludes 32 MB of RAM. Even with 16 MB, 1-bit mode printing at 400 dpi is av ailable on all paper siz es.
The Print Controller 1-8 The Print Contr oller Specifications System Architecture IBM Compatible PC System Processor 233 MHz Intel Pentium MMX Memory 32 MB standard - MU105 64 MB - MU301 128 MB - MU30.
Section 2: Printer Driv ers.
2-2 Printer Drive rs Printer Drivers Installing Printer Drivers Windows 3.x The Printer Drivers that come with the IP-411 Print Controller are actually software programs that enable you to control all the printing settings for the selected printer . Before you can print from your application (e.
Printer Drivers 2-3 Printer Drivers Installing Printer Drivers Windows 3.x Assigning a Port By default, LPT1 will be assigned to the newly installed printer . 1. T o assign a dif ferent port, click on the Connect button. 2. In the Ports list, select the port you want to assign to the printer .
2-4 Printer Drive rs Printer Drivers Checking the V ersion of A Printer Driver Windows 3.x There may be times when you need to know if you are using the most up-to-date printer driver . Use the following procedure to check the version of a printer driver .
Printer Drivers 2-5 Printer Dr ivers Printing Modes Output Quality High Mode (P ostScript) High Mode produces 256-le v el gr ayscale printing with 8 bits per pix el . T ext Mode (PCL/P ostScript) T e xt Mode performs normal quality 2-le vel grayscale printing.
2-6 Printer Drive rs Printer Dr ivers Printing Modes Real Time Mode Pri n t The print controller perfo rms page printing and starts printing as soon as it starts receiving a print job . T his is dif fe r ent from document pr inting , w he r e a printer starts printing only after recei ving the entire print job .
Printer Drivers 2-7 Printer Dr ivers T ra y Selection/Paper Selection The system selects the paper size and pa per tray in the manner specified belo w . When Paper Size is Not Specified ? When a pr int job does not specify paper size , the default paper size will be used .
2-8 Printer Drive rs Printer Dr ivers Font Selection Standard fonts of the PostScript and PCL 5e languages are displayed on the f ollo wing pages. T he PostScript fonts shown are the visual equi v alent of the Adobe fonts with the same names. A P ostScr ipt compa tible file system is provided for storing do wnloaded fonts or other f iles.
Printer Drivers 2-9 Printer Dr ivers Font Characteristics A font is described by its Symbol Set and font characteristics, such as, T ypef ace, Point Size, Pitch, Spacing , Stroke W eight and Style. Symbol Set: A Symbol Set relates to the unique set of all a vailable alphanumeric , punctua tion, and special symbols in a font.
2-10 Printer Drive rs Printer Dr ivers PostScript Printer Language F onts The follo wing fonts are the visual equiv alent of Adobe font names. A v antGarde-Book ABCDEFGHIJ1234567890 A vantGar de-BookO.
Printer Drivers 2-11 Printer Dr ivers PCL Printer Language Fonts The interpreter f or the PCL langua ge inter prets the follo wing fonts for a PCL print job .
2-12 Printer Drive rs Printer Dr ivers PCL Printer Language Fonts The interpreter f or the PCL langua ge inter prets the follo wing fonts for a PCL print job .
Section 3: Printer Driver Scr eens.
3-2 Printer Driver Screens Printer Driver Screens Overview This section shows the various printer driver screens you will encounter when making printing selections, depending the printer driver installed. Samples include PostScript and PCL printer driver screens for W indows 3.
PostScript Driver Screens for W indows 3.1.
3-4 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for W indows 3.1 Paper Source The Print selection screen indica tes the cur rent settings f or P aper Sour ce , Paper Size and Orientation.
Printer Driver Screens 3-5 Printer Driver Screens PostScript Driver Screens for W indows 3.1 Options When Options is selected from the initial pr int selection screen sho wn on the pre vious pa ge, the abov e screen displays the features that allow you to control the f inishing style of y our print job .
3-6 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for W indows 3.1 Advanced Options The A dvanced Options scr een allows you to select the follo wing: Fonts Y ou ma y change the default font curr ently in use b y clic king the ar ro w in the [S end to Pr inter as: ] field to display the list of av ailable fonts.
Printer Driver Screens 3-7 Printer Driver Screens PostScript Driver Screens for W indows 3.1 Offset Mode From the Options screen, use the arro w under Printer fe atures to scroll thr ough the list of a vailable options. When pr inting m ultiple sets you may select the Of fset mode to ke ep the sets separat ed .
3-8 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for W indows 3.1 Staple Mode From the Options screen, use the arro w under Printer fe atures to scroll thr ough the list of a vailable options. When printing multiple sets you may select the Staple mode to staple each set.
Printer Driver Screens 3-9 Printer Driver Screens PostScript Driver Screens for W indows 3.1 Print Quality From the Options screen, use the arro w under Printer fe atures to scroll thr ough the list of a vailable options.
3-10 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for W indows 3.1 Print Density Print Density allo ws you to reduce toner consumption b y using the T oner Sa ver mode or Draft mode .
Printer Driver Screens 3-11 Printer Driver Screens PostScript Driver Screens for W indows 3.1 Paper Size The Print screen indicates the current setting for paper size. 1 Use the P aper Size a rro w to scroll through the list of options if you wish to select another paper size.
3-12 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for W indows 3.1 Resolution The A dvanced Options scr een indicates the curren t ad v anced settings and the default Resolution setting of 400 dpi. 1 T o change the Resolution setting, click on the arr o w to display the options.
Printer Driver Screens 3-13 Printer Driver Screens PostScript Driver Screens for W indows 3.1 Edge Smoothing Edge Smoothing The def ault setting is Off . When Edge Smoothing is turned On, edges of te xt or objects are f illed in with extra toner and feathered edges are closed to enhance the image.
3-14 Printer Driver Screens Printer Driver Screens PostScript Driver Screens for W indows 3.1 Output Bin Output Bin 1. From the Options screen, use the arro w under Printer fe atures to scroll thr ough the list of a vailable options. 2 Click on the Output Bin feature.
Printer Driver Screens 3-15 Printer Driver Screens PostScript Driver Screens for W indows 3.1 Output Order 1 From the Options screen, use the arro w under Printer fe atures to scroll thr ough the list of a vailable options. 2 Click on the Output Order f e a tur e to display the current setting in Setting for : Output Or der .
PCL Driver Screens for W indows 3.1.
Printer Driver Screens 3-17 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Select Print Select Print When you select Print from your W indows application screen, the Windows Print screen displays the current settings as shown above.
3-18 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Print Setup View Curr ent Printer Settings When Setup is selected from the Print screen (see previous page), the Print Setup screen displays the current settings.
Printer Driver Screens 3-19 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Print Setup Paper Size When you click the arrow next to paper size, optional paper sizes are listed. If you wish to select another paper size, be sure to load that size in one of the paper trays before selecting it.
3-20 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Print Setup Paper T ray Sour ce Using Au to Select Auto Select is the default mode for paper tray Source , w h i c h means the pr inter will automatically locate the tray containing the selected paper size without your interv ention.
Printer Driver Screens 3-21 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Setup T ab Setup Screen The Setup tab brings you to a screen that shows the cur rent settings for P aper Siz e, Pa per Tr ay , Resolution and Orientation.
3-22 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 W atermarks T ab W ater m a r k s The W a ter marks screen allo ws you to select <None>, CONFIDENTIAL, COPY , or DRAFT for you r W atermark setting.
Printer Driver Screens 3-23 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Edit W atermark Edit W atermar k The Edit screen allo ws you to change the F ont, Siz e, Style and Color of the highlighted text. Other settings allo w y ou to adjust the Saturation and Intensity of the color .
3-24 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Add W atermark Ad d W atermar k When you click Add on the W atermarks scr een, the Add W atermark screen displays, as sho wn above.
Printer Driver Screens 3-25 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Fonts T ab Fonts Settings The Fonts tab displays a screen indicating the current font substitution method, along with three other options.
3-26 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Font Substitutions T a ble Font Substitutions T abl e When you click Edit the T able on the pre vious screen, a list of T rue T ype f onts displa ys on the scr een along with the printer's method of using each font.
Printer Driver Screens 3-27 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Fonts Substitution T a ble Font Substitutions T abl e 1. Highlight the desired font. In this screen, Courier Ne w is highlighted. 2. Use the arro w in the [ Printer font for : ] field and scroll down to the desired setting.
3-28 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Job T ab Job Settings The curr ent J ob settings indicate that the Duplex Mode, W ait Mode and Special Modes are Of f. T o vie w or change these settings, c lic k the arrow n ext to the setting to displa y option settings, then click OK.
Printer Driver Screens 3-29 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Job - Duplex Mode Duplex Mode 1. When you click the arrow next to Duplex Mode , option settings ar e displayed. • Select Short Edge Binding to bind the document along the short edge (Landscape orientation).
3-30 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Job - W ait Mode W ait Mode From the Job t a b scr een, click the arr o w next to the W ait Mode f ield. Select W ait On to be prompted to install special paper , s uch as OHP , Thin stock or Thick stock bef ore the printing job is star t e d.
Printer Driver Screens 3-31 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Job - Special Modes Special Modes From the Job ta b scr een, click the arr ow next to the Special Modes f ield to display the Special Modes options.
3-32 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Covers T ab Front and Back Co ve rs The Cover s ta b displays the abov e scr een that shows the default settings for Fr ont Co ve r , Front Cover T ray , Back C over mode and Bac k Cover Tra y .
Printer Driver Screens 3-33 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Covers Front Cov er Mode The Front Cov er mode is Of f by default. T o vie w options, click the arr o w next to the Front Cov er field. Select Printed to pr int on the Front Co ver sheets befo re inserting them into your document.
Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Covers Front Cover T ray Click on the arrow next to the Front Cover T ray field to view tray options. Highlight the tray you want to use for the Front Covers, then click OK. In this example, T ray 1 is selected.
Printer Driver Screens 3-35 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Covers Back C over Mode The Back Cover mode is Of f by def ault. T o vie w options, click the arr o w next to the Back Cover field. • Select Printed to pr int on the Back Cover sheets before inserting them into y our document.
3-36 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Covers Back Cover T ray 1. Click on the arrow next to the Back Cover T ray field to view tray options. 2. Highlight the tray you want to use for Back Covers, then click OK.
Printer Driver Screens 3-37 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Media T ab Media Settings When you click on the Media tab, current settings are displayed for Print Density and Media T ype. This screen shows that Normal is selected for Print Density and Plain Paper is selected for Media T ype.
3-38 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Media Settings Print Density 1. Click the arrow next to the Print Density setting to display density options. • Select the T oner Save mode to use only 80% of the toner normally used.
Printer Driver Screens 3-39 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Media T ype Media T ype 1. Click on the arrow next to the Media T ype setting to display a list of options, including OHP Transpar- ency , Thin Paper and Thick Paper .
3-40 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Finishing T ab Finishing Settings The Finishing screen shows the default settings for Collate, Stapling and Output Bin. The default setting for Stapling is Of f. Click the arrow in the Stapling field to display optional Stapling settings.
Printer Driver Screens 3-41 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Finishing Stapling 1. Click the arrow in the Stapling field to display stapling options. • Single stapling inserts one staple in the upper left corner of your document.
3-42 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Options (Device) Device Settings The Options screen shows the default settings for Finisher , Drawer Base and Memory installed. T o view or change the current Drawer Base setting, click on the arrow in the Drawer Base field (see next page.
Printer Driver Screens 3-43 Printer Driver Screens PCL Driver Scr eens for Windows 3.1 Drawer Base Setting Drawer Base Setting The current Drawer Base setting is displayed along with optional settings. 1. T o change the setting, highlight the desired setting.
P ostScript Dri ver Screens fo r W indows 95.
3-44 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 General T ab General Screen The General tab brings you to the above basic scr een tha t identifies the name of your printing de vice . Click on Browse to r evi e w y our printing en vir onment and get questions answered up front.
Printer Driver Screens 3-45 Printer Driv er Screens P ostScript Driver Screens f or W indows 95 Graphics T ab Resolution & Halftoning The Graphics tab brings you to a screen that displays default settings for Resolution & Halftoning. The def ault setting f or Resolution is 400 dpi with no special Halftoning selected.
3-46 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indow s 95 Sharing T ab Sharing On A Netw ork The Sharing tab displays a screen that sho ws whether your printer is being shared on a netwo r k. The Not Shar ed status is indicated in the abo ve screen.
Printer Driver Screens 3-47 Printer Driv er Screens P ostScript Driver Screens f or W indows 95 Fonts T ab Fonts Scr een The Fonts screen displa ys the current F ont selection settings. The def ault setting is: Send T r ue T ype f onts to pr inter accor ding to the font Substitution T abl e .
3-48 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 95 F ont Substitutions T abl e Font Substitutions T abl e The Font Substitutions T able displays w hen you select Edit the T able from the Fonts screen sho wn on the pre vious page.
Printer Driver Screens 3-49 Printer Driv er Screens P ostScr ipt Driver Scr eens for W indows 95 Details T a b - Printer Port Printer Port The Details tab displays a screen indicating the current print port setting.
3-50 Printer Driver Scr eens Printer Driv er Screens P ostScript Dri ver Screens f o r W indows 95 Details T ab - Pr inter P o rt Printer Port Setting Options The def ault printer port setting is LPT1. 1 Click the arrow next to the current setting to displa y port options.
Printer Driver Screens 3-51 Printer Driv er Screens P ostScript Driver Screens f or W indows 95 Details T ab Spool Settings When you click Spool Settings fr om the Details scr een, the Spool Setting scr een appear s , as sho wn above. The default Spool setting is Start pr inting after fi r st p age is spooled .
3-52 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Device Options The D evice Options screen displays the cur rent settings for Printer fea tur es and Installa ble options. 1 T o v ie w setting options, click the arrow next to Printer features or Installable options.
Printer Driver Screens 3-53 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur es - Print Quality The def ault setting f or Pr int Quality is T ext. T o change the default setting: 1 Use the arro w in the [ Chang e setting f or : Print Quality ] field to view options.
3-54 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur es - Edg e Smoothing The def ault setting f or Edge Smoothing is Off . When Edge Smoothing On, fe athered edges are f illed in with e xtra toner to make the pr inted image cleare r .
Printer Driver Screens 3-55 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur es - Print Density The def ault setting f or Pr int Density is Normal. T o change the default setting: 1 Use the arro w in the [ Change setting fo r: Print Density ] field to view options.
3-56 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featu r es - Job Offset Job Of fset mode deli ve r s m ultiple printed set to the finisher with sets of fset from one another .
Printer Driver Screens 3-57 Printer Featur es - Collate The Collate mode allows you to Sor t together multiple copies of the ori ginal set or Group together multiple copies of each original page.
3-58 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 95 Device Options T ab Printer Featur es - Special Modes The def ault setting f or Special Modes is Of f. T o change the default setting: 1 Use the arro w in the [ Chang e setting for: Special Modes ] field to vie w options.
Printer Driver Screens 3-59 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featu r es - Stapling The def ault setting f or Stapling is Of f . T o change the def ault setting: 1 Use the arro w in the [ Change setting for : S t apling ] field to view options.
3-60 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur es - W ait Mode The def ault setting f or W ait Mode is Of f . T o change the default setting: 1 Use the arro w in the [ Chang e setting for : W ait Mode ] field to vie w options.
Printer Driver Screens 3-61 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur e s - Fr ont Cover The def ault setting f or Front Cover is Of f. T o change the def ault setting: 1 Use the arro w in the [ Chang e setting for : F r ont Cov e r ] field to view options.
3-62 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur e s - Fr ont Cover T ray The def ault setting f or Front Cover T ray is None. T o change the def ault setting: 1 Use the arro w in the [ Chang e setting for : F r ont Cov e r T r ay ] field to view options.
Printer Driver Screens 3-63 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur e s - Bac k Cove r The def ault setting f or Back Cov er is Off . T o change the default setting: 1 Use the arro w in the [ Chang e setting for : Back Cove r ] field to view options.
3-64 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur e s - Back Co ver T ray The def ault setting f or Back Cov er Tra y is Of f . T o change the default setting: 1 Use the arro w in the [ Chang e setting for : Back Cove r T ray ] field to view options.
Printer Driver Screens 3-65 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Printer Featur es - Output Order The def ault setting f or Outp u t Or der is Face Down. T o change the default setting: 1 Use the arro w in the [ Chang e setting for : Output Or de r ] field to view options.
3-66 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Installable Options - Drawer Base The Device Options screen displa ys a list of Installable options. When Drawer Base is highlight in the Installable options field, the curr ent setting displays.
Printer Driver Screens 3-67 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 Device Options T ab Installable Options - Finisher The Device Options screen displa ys a list of Installable options. When Finisher Installed is highlighted in the Installa ble options field, the current setting displays.
3-68 Printer Driver Scr eens Installable Options - VMOption (V i rtual Memor y) The Device Options screen displays a list of Installable options. When VMOption is highlighted in the Installable options field, the curr ent setting displays. T his screen sho ws that 16 MB RAM is installed.
Printer Driver Screens 3-69 Printer Driv er Screens P ostScript Driver Screens f o r W indows 95 Paper T ab Paper Size When you click the P aper tab, the a bo ve screen displays the curr ent settings f or Paper Size, Layou t, Orientation, Paper Sour ce, and a setting for the n umber of Copies.
3-70 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f o r W indows 95 Paper T ab Paper Sour ce The def ault setting f or P aper Source is A utoSelect T ra y , which means the printer will use the appro pr i at e tray for the selected paper size.
Printer Driver Screens 3-71 Printer Driv er Screens P ostScript Driver Screens f o r W indows 95 Paper T ab Specifying Manual T ray 1 T o specify the Manual feed tray , click the arr o w in the [ P aper sourc e ] field to view options. 2 Highlight Manual Feed, then click OK.
3-72 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f o r W indows 95 Paper T ab Mor e Options Screen - Output bin Click on the More Options button to display current settings f or Paper type and Output bin. The def ault setting f or Output bin is the Middle Bin.
Printer Driver Screens 3-73 Mor e Options Scr een - Paper type The abov e scr een indica tes the cur r ent setting for Paper type. T he def ault setting is Plain Pa per . 1 Click the ar row n ext to the curr ent P aper type setting to vie w other options.
3-74 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 P ostScript T ab PostScript Output Forma t 1 Click the PostScript tab to display the P ostScript settings screen sho wn a bo ve. The sample screen sho ws the P ostScr ipt Output fo rm a t setting is P ostscript [optimize for speed] .
Printer Driver Screens 3-75 Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 P ostScript T ab Changing P ostScript output f ormat The default setting is P ostScript [optimize for speed] . T o change this setting: 1 Click the arrow next to the setting to vie w options.
3-76 Printer Driver Scr eens Printer Driv er Screens P ostScript Driver Screens f or W indows 9 5 P ostScript T ab Ad vanced PostScript Options The abov e sc r een displays when you click the A d v anced b utton on the PostScr ipt settings screen. As the screen indicates, " These settings ha ve been chosen to optimiz e printer perfo rmance.
PCL Driver Screens for W indows 95.
3-78 Printer Drivers Printer Driver Screens PCL Driver Scr eens for Windows 95 General T ab General Screen The General screen identifies the name of your printer and provides a Comment f ield in w h i c h you may ke y in a specif ic r equest. T he info rm a tion you request will be displayed on the screen.
Printer Drivers 3-79 Printer Driv er Screens PCL Dri ver Screens f o r W indows 9 5 Details T ab Details Scr een The Details tab brings you to a screen that shows the cur r ent Port setting in the [ Print to the following port ] f ield. The d ef ault setting is LPT1, as sho wn.
3-80 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Setup Scree n Setup Screen The Setup screen displays the follo wing def ault settings: • Pa per Siz e: Letter • .
Printer Drivers 3-81 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Setup Scree n Paper Size The default paper size is Letter size. 1 Click the ar r ow to scroll through the av ailabl e p a per size options. 2 T o select another paper size, double click on the desired size, then c lick OK.
3-82 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Setup Screen Paper T ray Setting The def ault setting f or P aper Tr ay is A uto Select, w hi c h enables the printer to automa tically select an appro pr i ate tray f or the pa per type you select.
Printer Drivers 3-83 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Setup Screen Resolution The curr ent setting for Resolution is indicated on the Setup screen. The def ault setting is 400 dpi. 1 T o change the setting indicat ed , click the ar r ow under Resolution to display another setting.
3-84 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 W atermark s Selecting a W at erma r k Click on the W atermar ks tab to displa y the screen sho wn a bo ve. From this screen, you ma y Select, Edit, Add, or Delete a Wa ter mark.
Printer Drivers 3-85 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Edi t W ater mark Edit W atermark Click the Edit button (see previous page) for the selected W atermark to display the screen shown above. Y ou may edit the Font type, Size, Style, Color , Saturation, Intensity and Angle.
3-86 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 A dd W ater mar k Add W atermark 1 T o add a W atermark, click Add on the W atermarks screen on p. 3-84. 2 In the T ext field, enter the wording for the new W atermark.
Printer Drivers 3-87 Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 F onts T ab Fonts Scr een The Fonts tab displays the curr ent f ont settings, as sho wn in the abov e scr een. The def ault setting is Auto Mat ch, whic h means that TrueT ype f onts will be exactly ma t ched by the fon ts built into your pr inter .
3-88 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 F ont Substitutions T able Font Substitutions T abl e The Font Substitutions T able ena bles you to specify which f onts ar e to be used by your pr inter for an y gi ven Tr ueT ype f ont.
Printer Drivers 3-89 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 F ont Substitutions T able Editing the F ont Substitution T able This sample screen sho ws tha t the exact-matc h Courier built-in printer f ont is used f or the Courier Ne w T r ueT ype font.
3-90 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Job T ab Job Settings Scr een The Job settings screen displays current job settings. In the abov e scr een, def ault settings for Duplex Mode , W ait Mode and Special Modes are indicated as Of f.
Printer Drivers 3-91 Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Duplex Mode Duplex Mode 1 Click the Duplex Mode arro w to vie w setting options. • Select Short Edge Binding to bind the document along the short edge for landscape orientation.
3-92 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 W ait Mode W ait Mode 1 Click the W ait Mode arrow to vi e w setting options. • Select W ait On to be prompted to install special paper , su ch as OHP , T hin stoc k or Thi c k stoc k before printing.
Printer Drivers 3-93 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Special Modes Special Modes 1 Click the Special Modes arro w to view setting options. • Select 2-in-1 to print two pages (images) on one standard sheet. • Select Booklet to print four pages (images) on one standard sheet.
3-94 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Cove rs T ab Covers Setting Scr een The Cover s ta b displays the abov e scr een that shows the default settings for Fr ont Co ve r , Front Cover T ray , Back C over mode and Bac k Cover Tra y .
Printer Drivers 3-95 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Front Covers Front Cov er Mode The Front Cov er mode is Of f by def ault. T o c hange this setting: 1 Click the arrow next to the F r ont Cov er field to view option settings.
Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Front Covers Front Cover T ray The Front Cover T ray is set at None by default. T o change this setting: 1 Click on the arrow next to the Front Cover T ray field to view tray options. 2 Highlight the tray you want to use for Front Covers, then click OK.
Printer Drivers 3-97 Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Back C o vers Back C over Mode The Back Cover mode is Of f by def ault. T o change this setting: 1 Click the arrow next to the Bac k Cover field to view options. • Select Printed to pr int on the Back Cover sheets before inserting them into y our document.
3-98 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Back C o vers Back Cover T ray The Back Cover T ray is set at None by default. T o change this setting: 1 Click the arrow next to the Back Cover T ray field to view tray options.
Printer Drivers 3-99 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Media T ab Media Settings Screen When you click on the Media tab, current settings are displayed for Print Density and Media T ype. This screen shows that Normal is selected for Print Density and Plain Paper is selected for Media T ype.
3-100 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Media Print Density The default setting for Print Density is Normal. T o change this setting: 1 Click the arrow in the Print Density field to view options. • Select the T oner Save mode to use only 80% of the toner normally used.
Printer Drivers 3-101 Printer Driv er Screens PCL Dri ver Screens f o r W indow s 95 Media Media T ype The default setting for Media T ype is Plain Paper. T o change this setting: 1 Click on the arrow in the Media T ype field to view options (OHP T ransparency , Thin or Thick Paper).
3-102 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f or W indows 95 Finishing T ab Finishing Settings Screen The Finishing screen shows the default settings for Collate, Stapling and Output Bin. Click the arrow next to the Stapling setting to display optional Stapling settings and follow instructions on the next page.
Printer Drivers 3-103 Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Finishing Stapling The default setting for Stapling is Of f. T o change this setting: 1 Click the arrow in the Stapling field to view options. Three Stapling options are available.
3-104 Printer Drivers Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Options (Device) Device Settings The Options screen shows the current settings for Finisher , Drawer Base and Memory Installed. This sample screen shows that the FS-105 Finisher is installed, the Drawer Base setting is None, and the installed Memory is 32 MB RAM.
Printer Drivers 3-105 Printer Driv er Screens PCL Dri ver Screens f o r W indows 95 Options (Device) Drawer Base Setting The default setting for Drawer Base is None. T o change this setting: 1 Click the arrow in the Drawer Base field to view options. 2 Highlight the desired Drawer Base setting, then click OK.
PS (PostScript) Driver Screens for W indows NT.
Printer Drivers 3-107 Printer Driver Screens PS Driver Scr eens for Windows NT Selecting Printer Printer Menu When you select Pr inter fr om the Pr inter men u, a sub-screen displa ys as shown a bo ve. This screen allo ws you to select Properties, whi ch displays a Gener al screen for c hoosing device settings for installed options.
3-108 Printer Drivers Printer Driver Screens PS Driver Scr eens for Windows NT General Scr een General Screen The General screen identifies the name of your printer and provides a Comment f ield in w h i c h you may ke y in a specif ic r equest. T he info rm a tion you request will be displayed on the screen.
Printer Drivers 3-109 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Device Settings Installable Options - Memor y Configur ation The Device Settings ta b brings you to the De vice Settings scr een sho wn above. 1 Click Installable Options to displa y a list of installable options, e.
3-110 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Device Settings Installable Options - Drawer Base 1 T o view the current Dr awer Base setting, highlight Draw er Base in the Installa ble options field. Thi s sample screen indicates tha t the DB-608 Dr awer Base is installed.
Printer Drivers 3-111 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Device Settings Installable Options - Finisher 1 Highlight Finisher Installed under Installable Options to display the current setting. This sample scr een indicates tha t the FS-105 finisher is installed.
3-112 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup Scr een - P aper Siz e 1 Select Print from the application screen to display the Printer Menu screen, then select Document Defaults to displa y the Page Setup screen, shown abov e.
Printer Drivers 3-113 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup Scr een - Paper Sour ce The def ault setting f or P a per Source is Automaticall y Selected , as indicated in the above screen. This setting enables the printer to automatically select a tray that contains the selected paper size.
3-114 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup Scr een - Collate When chec ked, the Collate function enables y ou to print multiple sets of an ori g inal document and collat e each set in the proper ord e r .
Printer Drivers 3-115 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup Scr een - Copy Count The Copy Count setting ena bles you to select from 1-999 copies. T o o ve rcome the limit imposed by the maximum ca pacity of the output tray , r e m o ve the output pages before the tray limit is reached .
3-116 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup Scr een - Orientation (Portrait, Landscape, Rotated) The Orientation setting enables you to output the image in either portrait or landscape style.
Printer Drivers 3-117 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup - Duplex Printing (None, Short Side, Long Side) When there is no black dot ne xt to [None], Duplex Printing is on and printing will be perfor med on both sides of eac h sheet.
3-118 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Page Setup - Color A ppearance (Gray Scale) By default, the Gr ay Scale setting is on, as indicated by the b lac k dot ne xt to the Gra y Scale setting.
Printer Drivers 3-119 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Resolution (400 dpi/ 600 dpi) Select Advanced tab on the P a ge Setup screen to displa y the scr een shown abov e. Resolution is listed under the Graphic heading.
3-120 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Scaling Highlight Scaling under the Graphic heading to view the cur rent setting. The def ault setting sho wn a bo ve is 100%, wh ic h means the printed image will be 100% of the ori g inal image size, i.
Printer Drivers 3-121 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - T r ueT ype Font Highlight Tr ueT ype Font listed under the Graphic heading to display the current setting. In this example, the default setting , Substitute with Device F o nt is indica te d .
3-122 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer F eatures (Print Quality) Click on Printer Features to vie w the list, includin.
Printer Drivers 3-123 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer F e atures (Edg e Smoothing) Highlight Edge Smoothing to display the current setting.
3-124 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer F e atures (Print Density) Highlight Pr int Density to display the current setting.
Printer Drivers 3-125 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer F eat ures (Media T ype) Highlight Media T ype to display the current setting. Plain Paper is the default setting . Notice that the setting is indicated in the Change 'Media T ype' Setting f ield along with options.
Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer Feat ur es (Job Offset) Highlight Job Of fset to display the current setting. On is the default setting . Notice that the setting is indicated in the [ Change 'Job Of fset' Setting ] field along with options.
Printer Drivers 3-127 Printer Driv er Screens PS Dri ver Screens f or W indows NT Document Defaults Ad vanced - Pr inter F eatu r es (Special Modes) Highlight Special Modes to display the curr ent setting. Off is the default setting . Notice that the setting is indicated in the Chang e 'Special Modes' Setting field along with options.
3-128 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Pr inter F eat ures (Stapling) Highlight Stapling to display the current setting. Of f is the default setting . Notice that the setting is indicated in the [ Change 'Stapling' Setting ] field along with options.
Printer Drivers 3-129 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer F eat ures (W ait Mode) Highlight W ait Mode to display the current setting. Of f is the default setting. Notice that the setting is indicated in the Change 'W ait Mode' Setting f ield along with options.
3-130 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer Fe atur e s (F r ont Cover ) Highlight Front Co ver to display the curr ent setting. Of f is the default setting. Notice that the setting is indicated in the [ Change 'F r ont Cover' Setting ] field along with options.
Printer Drivers 3-131 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer Fe atur es (Front Cover T r ay) Highlight Front Co ve r T ray to display the current setting.
3-132 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Advanced - Pr inter Feat ur es (Back Cover) Highlight Back Cover to display the current setting. Of f is the default setting. Notice that the setting is indicated in the [ Change 'Back Cover' Setting ] field along with options.
Printer Drivers 3-133 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer Fe atur es (Back Cover T ray ) Highlight Back Cover T ray to displa y the current setting.
3-134 Printer Drivers Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Pr inter F eat ur es (Output Bin) Highlight Output Bin to display the current def ault setting. Output Bin describes wh ic h area of the f inisher will be used as the output tray .
Printer Drivers 3-135 Printer Driv er Screens PS Dri ver Screens f o r W indows NT Document Defaults Ad vanced - Printer F eat ures (Output Or der) Highlight Output Or der to display the cur rent setting.
PCL Driver Screens for W indows NT4.
Printer Drivers 3-137 Printer Driver Screens PCL Driver Scr eens for Windows NT Setup T ab Setup Screen The Setup screen displays the follo wing def ault settings: • Pa per Siz e: Letter • Paper T.
3-138 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Setup Screen Paper Size The default paper size is Letter size. 1 Click the ar r ow to scroll through the av ailabl e p a per size options. 2 T o select a pa per size, double c lick on the desir ed siz e, then click OK.
Printer Drivers 3-139 Printer Driver Screens PCL Driver Scr eens for Windows NT Setup Screen Paper T ray Setting The def ault setting is A uto Select, which enables the pr inter to automa tically select the appr op riate tr ay fo r the paper you select.
3-140 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Setup Screen Resolution The curr ent setting for Resolution is indicate d . The default setting is 400 dpi. 1 T o change the curr ent setting, c lic k on the arr ow to display the av ailable settings.
Printer Drivers 3-141 Printer Driver Screens PCL Driver Scr eens for Windows NT W atermarks T ab Selecting a W at erma r k Click on the W atermar ks tab to displa y the screen sho wn a bo ve. From this screen, you ma y Select, Edit, Add, or Delete a Wa ter mark.
3-142 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Edit W atermark Edit W atermark T o edit a W atermark, highlight one of the W atermarks listed on the previous screen, then click Edit to display the Edit screen shown above.
Printer Drivers 3-143 Printer Driver Screens PCL Driver Scr eens for Windows NT Add W atermark Add W atermark 1 T o add a W atermark, click Add on the W atermarks screen. 2 In the T ext field, enter the wording for the new W atermark. 3 Select the Font, Size, Style Color , Saturation, Intensity and the Angle, as desired.
3-144 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Fonts T ab Fonts Scr een The Fonts tab displays a screen that shows the current font settings. The def ault setting is Auto Mat ch, wh ic h means that TrueT ype f onts will be r eplaced by the exact-mat c h fonts b uilt into your printer .
Printer Drivers 3-145 Printer Driver Screens PCL Driver Scr eens for Windows NT Fonts Substitution T a ble Font Substitutions T abl e The Font Substitution T a ble ena bles you to specify which fonts shall be used by your pr inter for an y given T rueT ype font.
3-146 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Fonts Substitution T a ble Editing the F ont Substitution T able This sample screen sho ws tha t the Cour ier Ne w Tr ueT ype f ont uses the exact-ma t ch Courier built-in pr inter font.
Printer Drivers 3-147 Printer Driver Screens PCL Driver Scr eens for Windows NT Job T ab Job Settings The curr ent J ob settings indicate that the Duplex Mode, W ait Mode and Special Modes are Of f. T o vie w or change these settings, c lic k the arrow n ext to the setting to displa y option settings, then click OK.
3-148 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Duplex Mode Duplex Mode When you click the Duple x Mode arr ow , you may select Shor t Edge Binding to bind the document along the short edge or you may select Long Edge Binding to bind the document along the long edge, as in the usual Portrait orientation.
Printer Drivers 3-149 Printer Driver Screens PCL Driver Scr eens for Windows NT W ait Mode W ait Mode 1 From the Job ta b scr een, click the arr ow next to the W ait Mode f ield. • Select W ait On to be prompted to install special paper , su ch as OHP , T hin stoc k or Thi c k stoc k before the printing job is started.
3-150 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Special Modes Special Modes 1 From the Job ta b scr een, click the arrow next to the Special Modes f ield to display the Special Modes options. • Select 2-in-1 to print two pages (images) on one standard sheet.
Printer Drivers 3-151 Printer Driver Screens PCL Driver Scr eens for Windows NT Covers T ab Default Settings f or Covers The Cover s ta b displays the abov e scr een that shows the default settings for Fr ont Co ve r , Front Cover T ray , Back C over mode and Bac k Cover Tra y .
3-152 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Front Covers Front Cov er Mode The Front Cov er mode is Of f by default. T o vie w options, click the arr o w next to the Front Cov er field. • Select Printed to pr int on the Front Co ver sheets bef or e inserting them into your document.
Printer Drivers 3-153 Printer Driver Screens PCL Driver Scr eens for Windows NT Front Covers Front Cover T ray 1 Click on the arrow next to the Front Cover T ray field to view tray options. 2 Highlight the tray you want to use for the Front Covers, then click OK.
3-154 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Back Covers Back C over Mode The Back Cover mode is Of f by def ault. T o vie w options, click the arr o w next to the Back Cover field. • Select Printed to pr int on the Back Cover sheets before inserting them into y our document.
Printer Drivers 3-155 Printer Driver Screens PCL Driver Scr eens for Windows NT Back Covers Back Cover T ray 1 Click on the arrow next to the Back Cover T ray field to view tray options. 2 Highlight the tray you want to use for the Back Covers, then click OK.
3-156 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Media T ab Media Settings When you click on the Media tab, current settings are displayed for Print Density and Media T ype. This screen shows that Normal is selected for Print Density and Plain Paper is selected for Media T ype.
Printer Drivers 3-157 Printer Driver Screens PCL Driver Scr eens for Windows NT Media Print Density 1 Click the arrow next to the Print Density setting to display density options. • Select the T oner Save mode to use only 80% of the toner normally used.
3-158 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Media Media T ype When you click on the arrow next to the Media T ype setting, a list of options appears, including OHP T ransparency , Thin Paper and Thick Paper .
Printer Drivers 3-159 Printer Driver Screens PCL Driver Scr eens for Windows NT Finishing T ab Finishing Settings The Finishing screen shows the default settings for Collate, Stapling and Output Bin. Click the arrow next to the Stapling setting (Of f) to display optional Stapling settings.
3-160 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Finishing Stapling Three Stapling options are available. • Single stapling inserts one staple in the upper left corner of your document. • Double T op stapling inserts two staples across the top edge of your document.
Printer Drivers 3-161 Printer Driver Screens PCL Driver Scr eens for Windows NT Options (Device) Device Settings The Options screen shows the default settings for Finisher , Drawer Base and Memory installed. T o view or change the current Drawer Base setting, click on the arrow next to the Drawer Base (see next page.
3-162 Printer Driver Screens Printer Driver Screens PCL Driver Scr eens for Windows NT Options (Device) Drawer Base Setting The current Drawer Base setting is displayed along with options settings. T o change the setting, highlight the desired setting, then click OK.
Section 4: Symbol Sets & Roman-8 Character Con version T ab les Symbol Sets 4-2 Roman-8 Character Con v ersion T a bles 4-21.
4-2 Symbol Sets & Roman-8 Character Con ver sion T able s Symbol Sets.
4-3 Symbol Sets & Roman-8 Character Con v er sion T able s Symbol Sets The symbol sets listed below are displayed on pages 4~19. Please check your application softw are documentation to determine w h ich symbol sets are suppor t e d. For programm ers using HP PCL langua ge p rinter commands, the PCL v alue is given for each symbol set.
4-4 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-5 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-6 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-7 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-8 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-9 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-10 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-11 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-12 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-13 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-14 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-15 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-16 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-17 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-18 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-19 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-20 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-21 Symbol Sets & Roman-8 Character Con v er sion T able s Roman-8 Character Con ve r sion T a b le s.
4-22 Symbol Sets & Roman-8 Character Con ver sion T able s Roman-8 Character Con v e rsion T ables When the Roman-8 symbol set is do wnloaded to a PCL-based printer , it can be changed to other ISO symbol sets. The Roman-8 Symbol Set is displayed on p.
4-23 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-24 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-25 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-26 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-27 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-28 Symbol Sets & Roman-8 Character Con ver sion T able s.
4-29 Symbol Sets & Roman-8 Character Con v er sion T able s.
4-30 Symbol Sets & Roman-8 Character Con ver sion T able s.
Section 5: PCL 5 Printer Commands.
5-2 PCL Printer Commands PCL 5 Printer Commands The follo wing page display the basic PCL 5 escape codes f or job contr ol, page control , cu r sor positioning font selection, f ont management, vector gr aphics, raster graphics, printing , macr os, progr amming, palette extensions, and HP-GL/2.
5-3 PCL Printer Commands.
5-4 PCL Printer Commands.
5-5 PCL Printer Commands.
5-6 PCL Printer Commands.
5-7 PCL Printer Commands.
5-8 PCL Printer Commands.
5-9 PCL Printer Commands.
5-10 PCL Printer Commands.
5-11 PCL Printer Commands.
5-12 PCL Printer Commands.
5-13 PCL Printer Commands.
5-14 PCL Printer Commands.
5-15 PCL Printer Commands.
5-16 PCL Printer Commands.
5-17 PCL Printer Commands.
5-18 PCL Printer Commands.
K ONICA BUSINESS TECHNOLOGIES, INC. 500 Day Hill Road W indsor , CT 06095 T elephone: (860) 683-2222 0P-IP411-01 Printed in U .S.A . November 1999.
デバイスKonica Minolta IP-411の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Konica Minolta IP-411をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKonica Minolta IP-411の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Konica Minolta IP-411の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Konica Minolta IP-411で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Konica Minolta IP-411を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKonica Minolta IP-411の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Konica Minolta IP-411に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKonica Minolta IP-411デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
