Lantronixメーカー900-558の使用説明書/サービス説明書
ページ先へ移動 of 119
Part Number 900-558 Revision C March 2012 XPort Pro Command Reference.
XPort Pro Command Reference 2 Copyright and Trademark © 2012 Lantronix. All rights reserved. No part of t he contents of this book m ay be transm itted or reproduced in any form or by any means without the written permission of Lantr onix. Printed in the United States of America.
XPort Pro Command Reference 3 T able of Content s List of Figures _____________ ______________ _____________ _____________ ________ 4 List of Tables ____________ _____________ _____________ __________.
XPort Pro Command Reference 4 List of Figures Figure 3-1 CLI Level Hiera rchy _____________ _______________ ______________ ____________ 12 Figure 3-2 Login Le vel Commands _______________ ____________.
XPort Pro Command Reference 5 List of T ables Table 4-8 XCR Groups ___________ _____________ _____________ _____________ __________ 20 Table 4-9 XSR Groups and Item s _____________ _____________ _____.
XPort Pro Command Reference 6 1: About This Guide This guide describe s how to configure the XPort Pr o using the Command Line Inter face (CLI) and/ or Extensible Markup Langua ge (XML). It is written for software developers and system integrators. Chapter Summaries This table lists and summarizes each chapter an d appendix.
1: About This Guide XPort Pro Command Reference 7 Additional Document ation Visit the Lantronix web site at www.lantronix.com/support/documentation for the latest documentation and the following additional documenta tion.
XPort Pro Command Reference 8 2: Overview Evolution OS™ is the Lantronix cutting-edge operating system that supports thre e convenient configuration meth ods: Web Manager, Comm and Li ne Interface (CLI), an d Extensible Markup Language (X ML). For more infor mation about th e Web Manager, se e the XPort Pro User Guide at the Lantronix website.
XPort Pro Command Reference 9 3: Command Line Interface This chapter descr ibes ac cessing the XPort Pro by using Telne t, SSH, or serial ports to configure the XPort Pro, navigating the Command Line Inte rface (CLI), typing keyboard shortcuts, and moving between the leve ls.
3: Command Line Interface XPort Pro Command Reference 10 To configure the Lantronix device server locally us ing a serial port, c onnect a term inal or a PC running a terminal emul ation program to one of the device se rver's serial ports. Configure th e terminal for 9600 baud, 8- bit, no parity, 1 stop bit, and no flow control.
3: Command Line Interface XPort Pro Command Reference 11 Using Keyboard Shortcut s and CLI One useful shortcut built into Evolution OS™ is that the complete text of a command does not have to be entered to issue a command. Typing just enoug h characters to uniquely identify a command, then hitting enter, can be used as a sh ort cut for a command.
3: Command Line Interface XPort Pro Command Reference 12 Figure 3-1 CL I Level Hierarch y Commands at the login l evel, shown in Figure 3-2 , do not affect current confi guration settings and are not displayed init ially. If you type < ? >, you will see the login su b-commands.
3: Command Line Interface XPort Pro Command Reference 13 Figure 3-2 Login Level Commands >? clrscrn enable exit ping <host> ping <host> <count> ping <host> <count> <.
XPort Pro Command Reference 14 4: Configuration Using XML The device server provide s an Extensible Markup Langua ge (XML) interface that you can use to configure device server devices. Every configurat ion setting that can be issued from the device server Web Manager and CLI can be specified using XML.
4: Configuration Using XML XPort Pro Command Reference 15 Notes: The name for each <con fig group > ( specified with th e n ame attr ibu te) is the gr oup name listed in the Web Manager XCR grou ps or with the “xcr list” CLI command. See the XPort Pro User Guide for more information about the Web Manager XCR groups.
4: Configuration Using XML XPort Pro Command Reference 16 Record, Group, Item, and V alue T ags A <configgroup> is a logical grouping of configuratio n parameters an d must contain one or more <configitem> elements. It must have a name attr ibute and may have an instance attribute.
4: Configuration Using XML XPort Pro Command Reference 17 Figure 4-5 XML Example of Multiple Items Figure 4-6 XML Example with Mul tiple Groups Importing and Exporting an XML Configuration File An XCR.
4: Configuration Using XML XPort Pro Command Reference 18 allow for providing root and en ab le level passwords so that this can also be done at the password prompt. Web browser—Web Manager can be used to imp ort and export an XCR to the device server file system.
4: Configuration Using XML XPort Pro Command Reference 19 xcr export < file > xcr export < file > < groups and/or group:instances > The same guidelines above re garding importing configu rations also apply to exporting configurations.
4: Configuration Using XML XPort Pro Command Reference 20 The “xml paste passwords” <configgroup> nam e is used with the “ passwords” <configitem> name and “cli login” and “c li enable level” values to specify the pa sswords to use when the device has been co nfigured with password protection.
4: Configuration Using XML XPort Pro Command Reference 21 cli (continued) quit connect line Accepts text containing control characters, for example , <control> A represents control-A Default: <control>L inactivity timeout <None>, .
4: Configuration Using XML XPort Pro Command Reference 22 ethernet (Attribute of “instance” is “eth0”.) speed auto, 10, 100 De fault: auto duplex auto, half, full Default: auto ftp server state enable, disable Default: enable admin username Default: admi n admin password Value is SECRET, hidden from user view.
4: Configuration Using XML XPort Pro Command Reference 23 icmp state enable, disable Default: enable interface (Attribute of “instance” is eth0”) bootp enable, disable Default: disable dhcp enable, disable Default: enable ip address <None>, .
4: Configuration Using XML XPort Pro Command Reference 24 ip filter delete entries enable, disable If en abled, deletes any existing entries befo re adding “fil ter entry”. filter delete ip address Deletes a specific IP filter entry. net mask Deletes a specific IP filter entry.
4: Configuration Using XML XPort Pro Command Reference 25 line (Attribute of “instance” is a number.) (continued) xoff char Accepts a control character, for example , <control> A represents control-A Default: <control>S gap timer <None>, .
4: Configuration Using XML XPort Pro Command Reference 26 managelinx plaintext d sm credentials dna.xml.replication. protocol.version dna.capabilities.tcp. connect.fail enable, disable Default: disable encrypted dsm credentials dna.dsc.auth. tunnel.use rname dna.
4: Configuration Using XML XPort Pro Command Reference 27 modbus tcp server state enable, disable Default: disable additional port <None>, ... Default: <None> response timeout Default: 3000 milliseconds rss trace input enable, disable De fault: disable ppp (Attribute of “instance” is a number.
4: Configuration Using XML XPort Pro Command Reference 28 snmp state enable, disable Default: enable read community Value is SECRET, hidden from user view.
4: Configuration Using XML XPort Pro Command Reference 29 ssh server host rsa keys public key private key host dsa keys public key private key delete authorized users authorized user delete name autho.
4: Configuration Using XML XPort Pro Command Reference 30 telnet state enable, disable Default: enable port Default: 23 max sessions Default: 3 terminal (Attribute of “instance” is either “network” or a number.
4: Configuration Using XML XPort Pro Command Reference 31 tunnel acce pt (Attribute of “instance” is a number.) (continued) block serial enable, disable Default: disable block netwo rk enable, disable Default: disable password password Value is SECRET, hidden from user view.
4: Configuration Using XML XPort Pro Command Reference 32 tunnel disconnect (Attribute of “instance” is a number.) stop character Accepts a control character, for example , <control.
4: Configuration Using XML XPort Pro Command Reference 33 XML St atus Record Group s and Items Table 4-9 lists the supported XML Status Record (XSR) groups and items. These groups and items show the status of the device in XML form and can only be exported.
4: Configuration Using XML XPort Pro Command Reference 34 Table 4-9 XSR Groups and Items Group Name Item Name Value Name Valid Va lues arp (Attribute of “instance” is “eth0”.
4: Configuration Using XML XPort Pro Command Reference 35 email log (Attribute of “instance” is a number.) entry time log ethernet driver (Within group “buffer pool”.
4: Configuration Using XML XPort Pro Command Reference 36 ftp status running inactive connections rejected accepted last client ip address port hardware cpu type speed memory flash size ram size http state enabled disabled loggin g entries bytes http log entry (Attribute of “instance” is a number.
4: Configuration Using XML XPort Pro Command Reference 37 icmp in messages messages discarded errors destination unreacha ble time exceeded messages paramete r proble ms source quench requests redirec.
4: Configuration Using XML XPort Pro Command Reference 38 interface (Attribute of “instance” is “eth0”.) generic status no link link up disabled unknown errors (error text) none ethernet (Present only for eth0.
4: Configuration Using XML XPort Pro Command Reference 39 interface (Attribute of “instance” is “eth0”.) (Continued.) transmit octets unicast non unicast discar ds errors broadcast packets mul.
4: Configuration Using XML XPort Pro Command Reference 40 ip state enabled disabled default ttl forwarded route discards in receives header errors address errors unknown protocols discar ded delivered.
4: Configuration Using XML XPort Pro Command Reference 41 line (Attribute of “instance” is a number.) receiver bytes breaks parity errors framing errors overrun errors no receive buffer errors que.
4: Configuration Using XML XPort Pro Command Reference 42 line (With no instance.) (Within group “line” with instance.) (continued) flow control hardware none software xon char xoff char lpd (Attribute of “instance” is a number.
4: Configuration Using XML XPort Pro Command Reference 43 modbus tcp server (Attribute of “instance” is “permanent” or “additional”.) (continued) current connection ( remote port uptime pdus in pdus out processes process (Attribute of “instance” is a number.
4: Configuration Using XML XPort Pro Command Reference 44 tcp retransmission algorithm vanj timeout minimum timeout maximum connections maximum open active open passive failed resets established error.
4: Configuration Using XML XPort Pro Command Reference 45 tunnel (Attribute of “instance” is a number.) aggregate completed connects completed accepts disconnects dropped connects dropped accepts .
4: Configuration Using XML XPort Pro Command Reference 46 vip conduit status up down disabled idle negotiating closing conduit uptime config name current tunnel port dsm ip address list local dna id t.
XPort Pr o Comma nd Refer ence 47 5: Comma nds and Le vels Click t he level in t he tree s truc ture and it will tak e you to the c omm and list f or that le vel.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 48 • device (d evice) • dns (dns) • email 1 (em ail:1) • cp (em ail - cp:1) • email 2 (em ail:2) • cp (em ail - cp:2) • email 3 (e.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 49 Table 5 - 1 C ommands and Levels accept (tunne l - accept: 1) level com mands accept mode alway s Enables t he tunnelin g server to alway s accept tun neling connection s.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 50 default pr otocol Restores th e defau lt protocol a s "TCP". default start char acter Defaults th e accept mode start characte r. default t cp keep al ive Restores th e defau lt 45 secon d accept mode T CP keep alive timeo ut.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 51 A decimal v alue chara cter has the form 99. A hex value charact er has the form 0x FF. tcp keep alive <milli sec ond s> Enables T CP keep aliv e for ac cept mode tu nneling and sets the timer.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 52 delete all k nown host s Remove all h nown host s delete all u sers Remove all u sers delete know n host <s erver> Remove know n host delete user <usernam e> Delete the named user exi t Exits to t he ssh level.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 53 query port Enters the query por t level. rss Change to menu level for RSS configuratio n and s tatus show Displ ays syst em information. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 54 connection s to other devices . default re connect ti me Restores th e defau lt reconnect time value for connect mode tunnel ing. default start char acter Defaults th e connect mode sta rt charact er.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 55 wri te Stores the current configuratio n in permanent memory . cp (email - cp: 4) level comma nds clrscrn Clears the screen. exi t Exits to t he nex t higher level. group <text> Specify a C P group th at shall t rigger an e mail.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 56 exi t Exits to t he nex t higher level. group <text> Specify a C P group th at shall t rigger an emai l. <text > = configurable pin grou p. no group Disables the trigger to send a n email.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 57 show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. wri te Stores the current configuratio n in permanent memory . cpm (cpm) lev el comm ands add <cp > to <group> Adds the specified CP t o the s pecified gro up.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 58 auto show tlog Continuou sly displ ays the int ernal tr ouble log. auto show upload Continuou sly displ ays the st atus of fir mware uplo ad. clrscrn Clears the screen. default long name Restores th e defau lt product lo ng name.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 59 modem control disa ble Does not w atch the mode m control pin to disconnect . modem control enab le Watches the modem con trol pin and disconne cts if it is not asserted. no stop character Removes the stop chara cter.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 60 sage body of an email alert. <text > = the name of a local fil e. no cc Removes the C c addres ses for email alert s. no clear mai l count ers Restores th e email c ounters t o the aggre gate va lues.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 61 default pr iority Sets X - Priority for email aler ts to 3 (normal). default ser ver port Restores th e factory default p ort for S MT P on the server si de. email <num ber> Enters the configur e email level.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 62 email 3 (em ail:3) lev el comm ands auto show statist ics Continuou sly displ ays e mail statist ics. cc <tex t> Sets Cc addr esses for email al erts. <text > = a quoted, se micolon separated list of em ail ad- dresses.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 63 show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. show log Displays the email log . show statisti cs Displ ays e mail st atist ics. subject < te xt> Sets the Su bject for email aler ts.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 64 priority n ormal Sets X - Priority for email aler ts to 3 (normal). priority ur gent Sets X - Priority for email aler ts to 1 (urgent). priority v ery low Sets X - Priority for email alerts to 5 ( very low ).
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 65 show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. show interf aces Show interfa ce statistics show ip s.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 66 tftp get bi nary <sour ce file> < destinati on file> <hos t> Get a binar y file u sing TFT P tftp get bi nary <sour ce f.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 67 aes encrypt key tex t <te x t> Sets the c onnect tunn el AES e ncrypt k ey with up to 16 bytes. E ach byte is represe nted by a single char acter. Note that qu otes must enclose the value if it cont ains spaces.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 68 clrscrn Clears the screen. default pr otocol Restores th e defau lt value of t he protoc ol (Telnet ). default re mote port Sets the re mote port (used t o connect to the host) to the default valu e, which dep ends on the selecte d protocol.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 69 Note that qu otes must enclose the value if it cont ains spaces. auto show statist ics show connection sta tistics clrscrn Clears the screen. default pr otocol Restores th e defau lt protocol a s "TCP".
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 70 default re mote port Sets the re mote port (used t o connect to the host) to the default valu e, which dep ends on the selecte d protocol. exi t Exits to t he configur ation lev el. host <number> Change to config host lev el name <text> Sets the name of the h ost.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 71 auto show statist ics show connection sta tistics clrscrn Clears the screen. default pr otocol Restores th e defau lt protocol a s "TCP". default t cp keep alive Restores th e defau lt 45 secon d connect mode T CP keep alive timeo ut.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 72 which dep ends on the selecte d protocol. exi t Exits to t he configur ation lev el. host <number> Change to config host lev el name <text> Sets the n ame of the h ost. <text > = name of the h ost.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 73 default pr otocol Restores th e defau lt protocol a s "TCP". default t cp keep alive Restores th e defau lt 45 secon d connect mode T CP keep alive timeo ut. exi t Exits to t he nex t higher level.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 74 host <number> Change to config host lev el name <text> Sets the n ame of the h ost. <text > = name of the h ost. no name Clears the name of the host. no remote addres s Clears the r emote a ddress of t he host.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 75 alive timeo ut. exi t Exits to t he nex t higher level. no addres s Removes the r emote h ost addr ess used to es tablis h tunneling co nnections . no aes decry pt key Removes the connec t tunnel AES decry pt key.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 76 <text > = name of the h ost. no name Clears the name of the host. no remote addres s Clears the r emote a ddress of t he host. no ssh user name Clears the SSH user name ass ociated w ith the host.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 77 no addres s Removes the r emote h ost addr ess used to es tablis h tunneling co nnections . no aes decry pt key Removes the connec t tunnel AES decry pt key. no aes encry pt key Removes the connec t tunnel AES encrypt key.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 78 no remote addres s Clears the r emote a ddress of t he host. no ssh user name Clears the SSH user name ass ociated w ith the host. protocol ssh Sets the pr otocol to S SH. protocol t elnet Sets the pr otocol to T elnet.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 79 no aes decry pt key Removes the connec t tunnel AES decry pt key. no aes encry pt key Removes the connec t tunnel AES encrypt key. no port Removes the r emote p ort use d to establi sh tunnel c onne c- tio ns.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 80 protocol ssh Sets the pr otocol to S SH. protocol t elnet Sets the pr otocol to T elnet. remote ad dress <tex t> Sets the IP address of the re mote host t o connect to when thi s h ost is selected on the login conn ect menu.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 81 no port Removes the r emote p ort use d to establi sh tunnel c onne c- tio ns. no ssh user name Removes the SSH user na me. no tcp keep alive Disables the conne ct mode T CP keep alive timeout .
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 82 remote ad dress <tex t> Sets the IP address of the re mote host t o connect to when thi s h ost is selected on the login conn ect menu. <text > = IP address . remote port <number > Sets the re mote port used to c onnect to t he host.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 83 no ssh user name Removes the SSH user na me. no tcp keep alive Disables the conne ct mode T CP keep alive timeout . no vip name Removes the V IP na me. port <num ber> Sets the re mote port to use for connect mode tunne ling.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 84 selected on the login conn ect menu. <text > = IP address . remote port <number > Sets the re mote port used to c onnect to t he host. <number> = port to b e used. show Displays the current configur ation.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 85 no vip name Removes the V IP na me. port <num ber> Sets the re mote port to use for connect mode tunne ling. <number> = number of t he por t to use. protocol ssh Uses SSH pr otocol for connec t mode tunnel ing.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 86 remote port <number > Sets the re mote port used to c onnect to t he host. <number> = port to b e used. show Displays the current configur ation. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 87 <number> = number of t he por t to use. protocol ssh Uses SSH pr otocol for connec t mode tunnel ing. protocol ssl Uses SSL prot ocol for connect mode tun neling. protocol t cp Uses TCP pr otocol for connect mode tun neling.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 88 show Displays the current configur ation. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. ssh user name <tex t> Sets the u sername for logging into the host via SSH.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 89 protocol ssl Uses SSL prot ocol for connect mode tun neling. protocol t cp Uses TCP pr otocol for connect mode tun neling. protocol tcp aes Uses TCP pr otocol w ith AES e ncryption for conne ct mode tunneling.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 90 ssh user name <tex t> Sets the u sername for logging into the host via SSH. <text > = username.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 91 protocol tcp aes Uses TCP pr otocol w ith AES e ncryption for conne ct mode tunneling. protocol t elnet Uses Telnet protocol (w i th IAC ) for conne ct mode tu nne- ling. protocol udp Uses UDP pr otocol for connec t mode tunnel ing.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 92 wri te Stores the current configuratio n in permanent memory . host 7 (tunnel - connect - host: 1:7) level comman ds address <tex t> Sets the re mote host t o estab lish tunne ling conne ctions wit h.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 93 protocol t elnet Uses Telnet protocol (w i th IAC ) for conne ct mode tu nne- ling. protocol udp Uses UDP pr otocol for connec t mode tunnel ing. protocol udp aes Uses UDP pr otocol w ith AES encry ption f or connect mode tunneling.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 94 address <tex t> Sets the re mote host t o estab lish tunne ling conne ctions wit h. <text > = IP address or host na me of the r emote host . aes decrypt key <h exadecim al> Sets t he connect tunnel AES decrypt key w ith up to 16 bytes.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 95 protocol udp aes Uses UDP pr otocol w ith AES encry ption f or connect mode tunneling. show Shows the c urrent co nfigurat ion. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 96 aes decrypt key <h exadecim al> Sets the c onnect tunn el AES d ecrypt k ey with up to 16 bytes. Each byte is represe nted by t wo adjace nt hex digit s. Bytes may ru n togeth er or be separated by optiona l pun c- tuation: 123ABC "12 3A BC" 12, 3A,BC 12.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 97 show Shows the c urrent co nfigurat ion. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 98 Authentic ation sche me. <uri> = UR I of the server. auth type <u ri> digest Sets an HTTP server authenti cation d irective to the Dige st Access Authentic ation sche me. <uri> = UR I of the server.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 99 %B bytes sen t ex cluding head ers (0 = ' - ') %h remote host (same as %a) %{h}i header conten ts from r equest (h = h eader strin .
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 100 show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. show statisti cs Shows ICM P statistics sta te d isa ble Prevents ICM P packets from b eing sent or r eceived.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 101 clrscrn Clears the screen. default i p time to liv e Res to res t he d efaul t IP tim e to li ve. default mult icast t ime to liv e Restores th e defau lt IP multic ast time t o liv e, which is o ne hop.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 102 <string> = string t hat may c ontain binary chara cters. Within [] use binary decimal u p to 255 or hex up to 0xF F.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 103 no command mode signon me ssage Clears the signon mess age displayed at boot time and when enteri ng command mode. no gap ti mer Removes the gap tim er, so for warding dep ends on the line s peed.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 104 A decimal v alue chara cter has the form 99 . A hex value charact er has the form 0x FF. link (config - et hernet:et h0) le vel command s clrscrn Clears the screen. default d uplex Restores th e defau lt duplex setting, w hich is a uto.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 105 CLI session. wri te Stores the current configuratio n in permanent memory . lpd 1 (config - l pd:1) level comman ds banner di sable Disables pr inting ba nner for a ll print jobs. Only pr int the banner w hen a job reque sts it.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 106 show Displays the current configur ation. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. show statisti cs Displays stati stics and status i nformatio n for this lpd line.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 107 display re mote ip enab le The incomin g RING is follow ed by the IP address of the caller. echo command s disable Does not e cho modem co mmands. echo command s enabl e Echoes modem comman ds.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 108 show Displays the current configur ation. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session. threshold <by tes > Sets the thr eshold ( byte count ).
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 109 <line> = num ber of the line (l pd serial port) to be conf i- gured. no local ip Removes the Local IP addr ess. no passwor d Removes the PPP auth enticati on passwor d. no peer ip Removes the peer IP addr ess.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 110 clrscrn Clears the screen. default max entries Restores th e defau lt number o f RSS feed entries. exi t Exits to t he configur ation leve l. feed disable Disables R SS feed. feed enab le Enables RSS f eed.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 111 host generate rsa 102 4 Generate RSA public and priv ate keys host generate rsa 512 Generate RSA public and priv ate keys host generate rsa .
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 112 system lo cation <tex t> Sets the SN MP sy stem locatio n. <te xt> = loca tion of device. system name <text> Sets the SN MP sy stem name. <tex t> = SNM P system name .
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 113 show Displays C ertificat e Infor mation. show author ity Displays Aut hority C ertifi cate Informatio n. show histor y Displays the last 2 0 commands ent ered duri ng the c urrent CLI session.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 114 default max timeout Restores th e defau lt Max imum Timeout between retr an s- missio ns. default send data Sets TCP to send data in acco rdance w ith standar ds. exi t Exits to t he configur ation leve l.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 115 echo enable Enables echo ing of characters received on the lin e back to the line. exi t Exits to t he configur ation leve l. exit conne ct menu di sable On the logi n connect menu, re moves the menu item a llo w- ing the user to ex it to the CLI.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 116 the line. exi t Exits to t he configur ation leve l. exit conne ct menu di sable On the logi n connect menu, re moves the menu item a llo w- ing the user to ex it to the CLI.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 117 clear counter s Sets the T FTP counter s to zer o. clrscrn Clears the screen. exi t Returns to t he conf ig level. no clear counter s Restores th e TFT P counters t o the aggregat e value s. show Displays the current configur ation.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 118 <line> = num ber of the termin al line (seri al port) t o be con- figured. terminal netw ork Enters th e configure - termin al level for the netw ork. tunnel <l ine> Enters the t unnel l evel.
5: Comma nds and L evels XPort Pr o Comma nd Refer ence 119 CLI session. show statisti cs Show XM L statistics wri te Stores the current configuratio n in permanent memory .
デバイスLantronix 900-558の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Lantronix 900-558をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLantronix 900-558の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lantronix 900-558の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lantronix 900-558で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lantronix 900-558を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLantronix 900-558の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lantronix 900-558に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLantronix 900-558デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。