LaserメーカーCB-USBT-R02の使用説明書/サービス説明書
ページ先へ移動 of 15
- 1 - System Requi rements ■ Microsoft Windows 98SE / ME / 2000 / XP / Vista ■ Mac OS X, 10.2 or later ■ USB Port 〈 1.1 / 2.0 〉 ■ No driver installation required except the Windows 98 SE. [Note] What does the (Remote Host) and (Lo cal Host) window stand for 1.
- 2 - Windows OS Using EasyCN.exe Program 1. After you connect the USB data transfer cable into the USB port of two computers, the program will be started automatically, if not, please double click the (EasySuite) on the EasySuite CDROM drive.
- 3 - 2. When the EasySuite program is executed on both computers, the connection will be made automatically. The following figure s hows the file manager windows for the two connected computers after the connection is successfully made.
- 4 - EasyCopy-Net Function The Introduction to Operation Window 1. Menu Function 2. Create new folder Click the right mouse button in the right side list window and select (Make Directory) command from pop-up edit menu to create new folder.
- 5 - 3. Cut 、 Copy 、 Pa ste 、 Delete 、 and Select All functions You can use these functions by selecting the file and right click the mouse button to pop-up the menu or select the (Edit) m enu from top of window. 4. View and Window Change the file/folder display and file manager windows layout.
- 6 - Function Description File Transfer 1. How to release the (Read Only) protection 1) Select (System → Setup)command. 2) Clear the check of (Shared as Read Only).
- 7 - 2. How to precede the file transfer Method 1: Select the file to be transferred and drag and drop it into the destination directly. Method 2: Select the file to be transferred and right click the mouse button and use the command in pop-up menu to (Copy) and (Paste) it in the destination.
- 8 - Stop the EasyCopy-Net 1. Select (System → Exit) command or click the " X " button to exit the program. 2. Click the ( Safel y Remove Hardware) icon at the system tray to safely stop the device and plug out the USB d ata transfer ca ble from the computer, the EasyCopy-Net program will be removed from the computer.
- 9 - Mac O S The steps to start EasyMacCopy 1. Insert the data transfer cable into the USB port of the computer, the Easy Suite CDROM Icon will be showed up in the desktop, double-click this icon to open the drive and find the EasyMacCopy program; double-click it to start the program.
- 10 - 2. After the Easy Suite program was run in the both side of the computer, you can precede the file transfer..
- 1 1 - EasyMacCopy Functions The Introduction to Operation Window 1. The function toolbar is at the top of operation window 2. Create new folder Click (New Folder) icon in the toolbar or pre ss (Control) with clicking the mouse button at the right-side window to create a new folder.
- 12 - 3. Rename 、 Refresh 、 Move to Trash 、 and Copy functions Select the file and press (control) with clicking the mouse button to pop-up the function menu. 4. Cut 、 Copy 、 Pa ste 、 Delete 、 and Select All unction’s Click (Edit) pull-down the menu on the top of window to open the function menu.
- 13 - Function Operation 1. How to release the (Read Only) protection 1) Click (EasyMacCopy) to pull- down the menu on the top of window and select 2) (Setup) item, a setup window will be displayed, clear the check of (Share as Read Only) to turn off the protection.
- 14 - 2. How to make the file transfe r Method 1: Select the file to be transferred and drag and drop it into the destination directly. Method 2: Select the file to be transferred and press (control) with clicking the mouse button to (Copy) and (Paste) it to the destination.
- 15 - The steps to stop EasyMacCopy 1. Click the left-top corner of EasyMa cCopy window; select (Quit EasyMAcCopy) to exit the program. 2. Drag and drop the Easy Suite CDROM icon on the desk top into the Trash, and remove the data transfer cable from the computer.
デバイスLaser CB-USBT-R02の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Laser CB-USBT-R02をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLaser CB-USBT-R02の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Laser CB-USBT-R02の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Laser CB-USBT-R02で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Laser CB-USBT-R02を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLaser CB-USBT-R02の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Laser CB-USBT-R02に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLaser CB-USBT-R02デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。