Leicaメーカー2の使用説明書/サービス説明書
ページ先へ移動 of 40
V ersion 2.0 English 50 40 30 20 GPS Equipment User Manual GPS System 500.
2 GPS Equipment User Manual -2.0.0en The instrument model and the serial number of your product are indicated on the typeplate. Enter the model and serial number in your manual and always refer to this information when you need to contact your agency or authorized service workshop.
3 GPS Equipment User Manual -2.0.0en Introduction System description Getting started with new equipment Care and T ransport Safety Instructions T echnical Specifications V iew of chapters View of chap.
4 GPS Equipment User Manual -2.0.0en Contents Contents Introduction ................................................... 5 System description ....................................... 6 GPS Receiver .......................................................
5 GPS Equipment User Manual -2.0.0en Introduction Leica Geosystems GPS System 500 comprises of GPS receiver hardware and PC based software for GPS Surveying and related applications. The Main components are: • GPS Receiver: Receive the satellite signals.
6 GPS Equipment User Manual -2.0.0en System description GPS Receiver The GPS Receiver receives the GPS signal from the NA VST AR satellites and calculates a range to all visible satellites.
7 Getting started with new equipment GPS Equipment User Manual -2.0.0en Getting started with new equipment Receiver Hardware The software contains a comprehen- sive Online Help System. This Help System is intended to replace the function of a printed manual.
8 Getting started with new equipment GPS Equipment User Manual -2.0.0en Charge the batteries Charge the batteries with the Leica Geosystems battery charger pro- vided. GEB121, GEB70 or GEB71 batteries may be used to power the GPS equipment. The GEB121 batteries may be charged using GKL1 1 1 or GKL122 chargers.
9 Getting started with new equipment GPS Equipment User Manual -2.0.0en Set Up the Equipment Successful GPS surveys require undisturbed satellite signal reception. This means that GPS Receivers should be set up in locations which are free of obstructions.
10 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters Step 2: Study the Icons Most important at this stage is the top part of the screen which contains several symbols (icons) which indicate the current system status.
11 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued Both Number of visible satellites and Number of satellites used .
12 Getting started with new equipment GPS Equipment User Manual -2.0.0en Y ou cannot proceed from here if no memory device is available. Insert a PC-card otherwise no GPS survey can be carried out.
13 Getting started with new equipment GPS Equipment User Manual -2.0.0en Use the cursor key to highlight Internal , then press ENTER . Then press F1 CONT in order to start the formatting process of the internal memory .
14 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued Some basic decisions have to be made in this panel: Which configuration set should be activated, which job the raw data should be stored and which antenna set-up should be used.
15 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued Use the cursor up or cursor down key to highlight the input field for jobs. Then press ENTER . The following listbox will appear: Now press F2 NEW .
16 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued By default the new job will be as- signed to the PC-card . If needed this can be changed to Internal by toggling the Device input field to Internal .
17 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued Now all required settings for a static survey are made. The Survey Begin panel looks as follows: Press F1 CONT to finishe this start- up sequence.
18 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued As soon as you are tracking a mini- mum of 4 satellites, the position icon is visible and the antenna is placed correctly above the survey marker , you should press F1 OCUPY .
19 Getting started with new equipment GPS Equipment User Manual -2.0.0en The PC-card must not be removed while in the Survey panel. If the card is taken out of the receiver all stored data might get corrupted, preventing SKI- Pro from successfully reading the data on the card.
20 Getting started with new equipment GPS Equipment User Manual -2.0.0en Measuring with the default configuration parameters, continued The screen is altered as follows: The ST ORE key has become active, and you still have the chance to check and correct the entered point id and the antenna height.
21 Getting started with new equipment GPS Equipment User Manual -2.0.0en Y ou can now switch of f the receiver . Once power is off disconnect all cables and put all equipment back into the shipping case. Y ou might now move to another site and repeat the procedure outlined in this chapter .
22 Getting started with new equipment GPS Equipment User Manual -2.0.0en Processing the data in the SKI-Pro software, continued When the computation is finished activate the "Results" view of your project and examine the information which is made available, including the logfile.
23 Safety Instructions GPS Equipment User Manual -2.0.0en Care and T ransport T ransport When dispatching the instrument, always use the complete original Leica Geosystems packaging (case and cardboard box). Never carry the instrument loose in a road vehicle .
24 Safety Instructions GPS Equipment User Manual -2.0.0en Safety Instructions The following directions should enable the person responsible for the Leica Geosystems GPS equipment, and the person who actually uses the equipment, to anticipate and avoid operational hazards.
25 Safety Instructions GPS Equipment User Manual -2.0.0en Limits to use Refer to Section "T echnical specifications" Environment: Suitable for use in an atmosphere appropriate for permanent human habitation: not suitable for use in aggressive or explosive environments.
26 Safety Instructions GPS Equipment User Manual -2.0.0en Responsibilities, continued Hazards in use Main hazards in use W ARNING The absence of instruction, or the inadequate imparting of instruction, can lead to incorrect or adverse use, and can give rise to accidents with far-reaching human, material, financial and environmental consequences.
27 Safety Instructions GPS Equipment User Manual -2.0.0en Main hazards in use, continued CAUTION: W atch out for erroneous measurements if the product is defective or if it has been dropped or has been misused or modified.
28 Safety Instructions GPS Equipment User Manual -2.0.0en Main hazards in use, continued Precautions: Keep at a safe distance from electrical installations. If it is essential to work in this environment, first contact the safety authorities responsible for the electrical installations and follow their instructions.
29 Safety Instructions GPS Equipment User Manual -2.0.0en Precautions: - Do not use a GPS receiver in a thunderstorm as you may increase the risk of being struck by lightning. - Be sure to remain at a safe distance from electrical installations. Do not use the GPS Antenna directly under or in close proximity to power lines.
30 Safety Instructions GPS Equipment User Manual -2.0.0en Main hazards in use, continued Suggestion for design of a Lightning Conductor for a GPS Antenna 1.
31 Safety Instructions GPS Equipment User Manual -2.0.0en Air T erminal arrangement (plan view) 1 GPS Antenna 2 Support-Structure 3 Air T erminal Grounding the Receiver/Antenna 1 Lightning Conductor A.
32 Safety Instructions GPS Equipment User Manual -2.0.0en Electromagnetic acceptability , continued CAUTION Disturbances caused by electromagnetic radiation can result in the tolerance limits for measurements being exceeded.
33 Safety Instructions GPS Equipment User Manual -2.0.0en Electromagnetic acceptability , continued Only for Leica Geosystems GPS equipment with integrated radio modem: W ARNING Electromagnetic radiation can cause disturbances in other equipment, in installations (e.
34 Safety Instructions GPS Equipment User Manual -2.0.0en FCC statement (applicable in U.S.) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (.
T echnical Specifications 35 GPS Equipment User Manual -2.0.0en T echnical Specifications SR520, SR530 T racking Characteristics Satellite Reception: Dual frequency Receiver channels: 12 L1 continuous.
T echnical Specifications 36 GPS Equipment User Manual -2.0.0en Carrier phase and code measurements on L1 and L2 are fully independent with AS on or off. Satellites T racked: Up to 12 simultaneously on L1 and L2 T ime to first phase measurement typically 30 seconds.
T echnical Specifications 37 GPS Equipment User Manual -2.0.0en Equipment weights Power Environmental Specifications Receivers SR530: 1.25 kg SR520: 1.15 kg SR510: 1.15 kg Antennas A T502: 0.4 kg A T501: 0.4 kg Power consumption SR530: maximum 7 W atts (excluding radio) SR520: maximum 5.
T echnical Specifications 38 GPS Equipment User Manual -2.0.0en Separation distances Baseline precision SR510/SR520/SR530 to A T502 or A T501 Antenna Supplied cables: 1.
T echnical Specifications 39 GPS Equipment User Manual -2.0.0en Leica Geosystems AG, Heerbrugg, Switzerland, has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems (ISO standard 9001) and Envi- ronmental Management Systems (ISO standard 14001).
Leica Geosystems AG CH-9435 Heerbrugg (Switzerland) Phone +41 71 727 31 31 Fax +41 71 727 46 73 www .leica-geosystems.com Printed in Switzerland - Copyright Leica Geosystems AG, Heerbrugg, Switzerland 2000 Original text 712164-2.
デバイスLeica 2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Leica 2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLeica 2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Leica 2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Leica 2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Leica 2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLeica 2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Leica 2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLeica 2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。