LenoxxメーカーCD-104の使用説明書/サービス説明書
ページ先へ移動 of 20
IB-CD104(T A)-FD-E-043002 ® COMP ACT DISC PLA YER AM/FM STEREO CASSETTE RECORDER MODEL CD-104 OPERA TING INSTRUCTIONS PLEASE READ CAREFULL Y BEFORE USE PLA YS MUSIC COMP ACT DISCS FULL Y PROG.
IB-CD104(T A)-FD-E-043002 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IB-CD104(T A)-FD-E-043002 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
IB-CD104(T A)-FD-E-043002 1 . Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode.
IB-CD104(T A)-FD-E-043002 CHOOSING THE POWER SOURCES Y ou can use the AC power or batteries as a power source. TIP Replace the batteries when the POWER lamp dims or when the player stops operating.
IB-CD104(T A)-FD-E-043002 1 Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD. 4 1 2 Lift the right corner of the CD DOOR marked OPEN to open it and place the CD in the CD compartment.
IB-CD104(T A)-FD-E-043002 PLA YING CD TRACKS REPEA TEDL Y (REPEA T PLA Y) 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press .
IB-CD104(T A)-FD-E-043002 Y ou can make a program of up to 19 tracks in the order you want them to be played. 1. Slide the FUNCTION switch to CD position. 2. Press the PROGRAM button. The PROG. and 00 will flash in the display . 3. Press or to select the tracks you want to program in the order you want.
IB-CD104(T A)-FD-E-043002 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback PLA Y will flash during pause.
IB-CD104(T A)-FD-E-043002 LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch to RADIO position, the POWER lamp will be on. 2 1 2 Slide the BAND switch to AM, FM or FM ST . you prefer . 9 3 1 3 Tune into the station you prefer using the TUNING control (at the right side of the set).
IB-CD104(T A)-FD-E-043002 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Slide or Adjust Adjust the volume VOLUME control (at the left side of the set) TIP Turn off the Radio Slide the FUNCTION switch to T APE position T o improve broadcast reception • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO.
IB-CD104(T A)-FD-E-043002 PLA YING A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door . 3 2 2 3 Press the PLA Y button. The player turns on and starts playing.
IB-CD104(T A)-FD-E-043002 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume VOLUME control (at the left side of the set) Fast forward or rewind the tape F AST FOR W ARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
IB-CD104(T A)-FD-E-043002 RECORDING ON A T A PE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, CD, or built-in microphone) you want to record.
IB-CD104(T A)-FD-E-043002 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button. TIP Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording. Pause recording • For best recording effect, use the AC power instead of batteries.
IB-CD104(T A)-FD-E-043002 PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet.
IB-CD104(T A)-FD-E-043002 PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
IB-CD104(T A)-FD-E-043002 MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
IB-CD104(T A)-FD-E-043002 TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the FUNCTION switch is at the right position as you want.
IB-CD104(T A)-FD-E-043002 SPECIFICA TION General Description Power source: AC 120V , 60Hz 12 Watts DC 12V (8 size C batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 1 / 2 8 ohm Output power: 1.
デバイスLenoxx CD-104の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lenoxx CD-104をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLenoxx CD-104の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lenoxx CD-104の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lenoxx CD-104で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lenoxx CD-104を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLenoxx CD-104の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lenoxx CD-104に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLenoxx CD-104デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
