LenoxxメーカーCDR-190の使用説明書/サービス説明書
ページ先へ移動 of 16
® COMP ACT DISC PLA YER WITH AM/FM CLOCK RADIO OPERA TING INSTRUCTIONS PLA YS ALL MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T RECEIVES AM/FM BROADCASTS W AKE UP T.
SAFETY INSTRUCTIONS The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER NEC - NA TIONAL ELECTRICAL CODE Do not apply oil or petroleum products or solvents to any part of this set. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
1. Setting the Clock 1 Connect the AC power cord into a live wall outlet. 3 Hold the T ime Button down, and press the Minute Button until the right minute time shows in the display . Hold the T ime Button down, and press the Hour Button, until the right hour time shows in the display .
2. Playing a CD 1 Slide the Function Switch to CD position, and the Mode Switch to ON position. 3 Close the CD Door by pushing it down at the position marked PUSH CLOSE. 4 PU S H OP E N Press the CD Door Open Button to open the CD Door and place the CD in the CD compartment.
Use these buttons for additional operations T o Press or Adjust Adjust the volume V olume Control Stop playback Pause playback CD track number will flash during pause. Press again to resume play after pause. Go to the next track Go back to the previous track Locate a point in a song or while playing, press and hold down until you find the point.
4. Playing CD tracks repeatedly (Repeat Play) T o repeat Press (during play) a single track (song) Press the Prog/Repeat Button once all the tracks (all songs) Press the Prog/Repeat Button twice 1. Slide the Function Switch to CD position, and the Mode Switch to ON position.
5. Playing CD in programmed or random order 1. Programmed Play Y ou can make a program of up to 16 tracks in the order you want them to be played. 1. Slide the Function Switch to CD position, and Mode Switch to ON. Make sure the CD is stopped. 2. Press the Program Button.
6. Listening to the radio Connect the supplied AC power cord (see Setting the Clock ). Slide the Function Switch to RADIO, and the Mode Switch to ON position. 1 2 3 Slide the Band Switch to the proper band position that you want. Tune into the station you prefer using the T uning Control.
T o improve broadcast reception FM antenna Fully stretch out the FM antenna for FM reception. Reorient the player itself for AM reception. Or locate the set near a window .
8. W aking up to alarm or music 1. Set Alarm Ti me 3. W aking up to CD 4. W aking up to radio 1. Hold the Alarm button. 2. Press the Hour button to select correct hour time. Release the Hour Button but continue to press the Alarm Button. 3. Press the Minute button for correct minute time.
9. Snooze and Sleep functions 1. T o sleep extra 9 minutes AU T O O N AL AR M CD OF F RA D I O 1. Make sure Mode Switch is set to AUT O or ALARM position. 2. Set the Function Switch to CD or RADIO as you prefer. Going to Sleep with music S LEEP S L EEP HO U R Press the Sleep and Hour Button, the music will start and play for 1 hour and 59 minutes.
Precautions On safety As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player , unplug the player , and have it checked by qualified personnel before operating it any further .
Precautions (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
T roubleshooting Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure that outlet has power . There is no sound. Make sure the Function Switch is at the right position as you want. Adjust the volume.
Specification GENERAL DESCRIPTION Power source: AC 120V , 60Hz 10W atts DC 9V (optional - for clock backup) Speakers: 2- 4 8 ohm Output power: 1.5W Dimensions: Width: 10 1 / 2 Depth: 6 1 / 4 .
デバイスLenoxx CDR-190の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Lenoxx CDR-190をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLenoxx CDR-190の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lenoxx CDR-190の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lenoxx CDR-190で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lenoxx CDR-190を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLenoxx CDR-190の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lenoxx CDR-190に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLenoxx CDR-190デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。