LG Electronicsメーカー32/37/42/47/55LV5の使用説明書/サービス説明書
ページ先へ移動 of 289
www .lg. com O WNER’S MANU AL L CD T V / LED L CD T V / PLA SMA T V Please re ad this manual carefully bef or e operating your se t and retain it for future r ef erence.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or regis- tered trademarks of HDMI Licensing LLC. Separate purchase Wireless LAN for Broadband/ DLNA Adaptor (AN-WF100) (Exc.
I CONTENTS CONTENTS PREP ARA TION LED LCD TV Models : 32/37/42LE4 *** , 32/37/42/47/55LE5 *** , 32/37/42/47/55LE75 ** , 32/37/42/47/55LE78 ** , 32/37/42/47/55LE79 ** , 42/47/55LE8 *** , 42/47LX6 *** , 32/37/42/47/55L V5 *** ...A-1 LCD TV Models : 32/37/42LD4 *** , 32/37/42/47/55LD6 *** , 32/42/47LD7 ***, 32/37/42LD8 *** .
II CONTENTS CONTENTS GAME Game ............................................................... 128 EPG(ELECTRONIC PROGRAMME GUIDE)(IN DIGIT AL MODE) Switch on/off EPG ...........................................130 Select a programme ..................
A-1 PREP ARA TION PREP ARA TION LED LCD TV MODELS : 32/37/42LE4 *** , 32/37/42/47/55LE5 *** , 32/37/42/47/55LE75 ** , 32/37/42/47/55LE78 ** , 32/37/42/47/55LE79 ** , 42/47/55LE8 *** , 42/47LX6 *** , 32/37/42/47/55L V5 *** ACCESSORIES Ensure that the following accessories are included with your TV .
A-2 PREP ARA TION PREP ARA TION FRONT P ANEL CONTROLS ■ Image shown may differ from your TV . NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-3 PREP ARA TION Only 42/47/55LE8 *** SPEAKER Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions. INPUT OK MENU POWER T ouch Button Y ou can use the desired button function by touching. Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.
A-4 PREP ARA TION PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.184 to 200) Never attempt to operate the TV on DC power .
A-5 PREP ARA TION ST AND INST ALLA TION ■ Image shown may differ from your TV . When assembling the desk type stand, check whether the bolt is fully tightened.
A-6 PREP ARA TION PREP ARA TION A TT ACHING THE TV T O A DESK (Only 32LE4 *** , 32LE5 *** , 32L V5 *** ) Desk Stand ■ Image shown may differ from your TV . The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
A-7 PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A - 8 PREP ARA TION PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . P ow e r S up p ly C ir c ui t b re a ke r EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-9 PREP ARA TION REMOTE CONTROL KEY FUNCTIONS (Only 32/37/42LE4 *** , 32/37/42/47/55LE5 *** , 32/37/42/47/55LE75 ** , 32/37/42/47/55LE78 ** , 32/37/42/47/55LE79 ** , 42/47/55LE8 *** , 32/37/42/47/55L V5 *** ) When using the remote control, aim it at the remote control sensor on the TV .
A-10 PREP ARA TION PREP ARA TION 1 1 1 0 to 9 number button (Space) LIST Q.VIEW Selects a programme. Selects numbered items in a menu. Opens an empty space on the screen keyboard. Displays the programme table. ( ► p.55) Returns to the previously viewed programme.
A-1 1 PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones. ■ Close cover .
A-12 PREP ARA TION PREP ARA TION REMOTE CONTROL KEY FUNCTIONS (Only 42/47LX6 *** ) When using the remote control, aim it at the remote control sensor on the TV . ( POWER) LIGHT ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby .
A-13 PREP ARA TION 1 1 1 0 to 9 number button (Space) LIST Q.VIEW Selects a programme. Selects numbered items in a menu. Opens an empty space on the screen keyboard. Displays the programme table. ( ► p.55) Returns to the previously viewed programme.
A-14 PREP ARA TION PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones.
A-15 PREP ARA TION LCD TV MODELS : 32/37/42LD4 *** , 32/37/42/47/55LD6 *** , 32/42/47LD7 ***, 32/37/42LD8 *** ACCESSORIES Ensure that the following accessories are included with your TV . If an accessory is missing, please contact the dealer where you purchased the TV .
A-16 PREP ARA TION PREP ARA TION FRONT P ANEL CONTROLS ■ Image shown may differ from your TV . NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-17 PREP ARA TION SPEAKER PROGRAMME VOLUME OK MENU INPUT POWER Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.) Only 32/42/47LD7 *** Downloaded From TV-Manual.
A-18 PREP ARA TION PREP ARA TION P SPEAKER PROGRAMME VOLUME OK MENU INPUT POWER P Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.) Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions.
A-19 PREP ARA TION Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p. 184 to 200) Never attempt to operate the TV on DC power . LAN Network connection for AccuWeather , Picasa, Y ouT ube, etc.
A-20 PREP ARA TION PREP ARA TION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV . 1 2 NOTE ► Do not use the Cable Management Clip to lift the TV . - If the TV is dropped, you may be injured or the TV may be damaged. Connect the cables as necessary .
A-21 PREP ARA TION SWIVEL ST AND ■ Image shown may differ from your TV . After installing the TV , you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
A-22 PREP ARA TION PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-23 PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . Power Supply Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-24 PREP ARA TION PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ( POWER) ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby . Adjust the Energy Saving mode of the TV .
A-25 PREP ARA TION 1 1 TELETEXT BUTTONS SUBTITLE These buttons are used for teletext. For further details, see the ‘T eletext’ section. ( ► p.177 ) Recalls your preferred subtitle in digital mode. 1 See a list of A V devices connected to TV . When you toggle this button, the Simplink menu appears at the screen.
A-26 PREP ARA TION PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones.
A-27 PREP ARA TION LED LCD TV MODELS : 47/55LX9 *** ACCESSORIES Ensure that the following accessories are included with your TV . If an accessory is missing, please contact the dealer where you purchased the TV . ■ Image shown may differ from your TV .
A-28 PREP ARA TION PREP ARA TION FRONT P ANEL CONTROLS ■ Image shown may differ from your TV . NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-29 PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p. 184 to 200) Never attempt to operate the TV on DC power .
A-30 PREP ARA TION PREP ARA TION SWIVEL ST AND ■ Image shown may differ from your TV . After installing the TV , you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV .
A-31 PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-32 PREP ARA TION PREP ARA TION Model VESA (A * B) Standard Screw Quantity 47LX9 *** 55LX9 *** 200 * 200 400 * 400 M6 M6 4 4 ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally .
A-33 PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ( POWER) LIGHT ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby . Y ou can turn the light of the remote control button on or of f.
A-34 PREP ARA TION PREP ARA TION 1 1 1 0 to 9 number button (Space) LIST Q.VIEW Selects a programme. Selects numbered items in a menu. Opens an empty space on the screen keyboard. Displays the programme table. ( ► p.55) Returns to the previously viewed programme.
A-35 PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones. ■ Close cover .
A-36 PREP ARA TION PREP ARA TION LED LCD TV MODELS : 42/47LE73 ** ACCESSORIES Ensure that the following accessories are included with your TV . If an accessory is missing, please contact the dealer where you purchased the TV . ■ Image shown may differ from your TV .
A-37 PREP ARA TION FRONT P ANEL CONTROLS ■ Image shown may differ from your TV . NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-38 PREP ARA TION PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.184 to 200) Never attempt to operate the TV on DC power .
A-39 PREP ARA TION ST AND INST ALLA TION ■ Image shown may differ from your TV . When assembling the desk type stand, check whether the bolt is fully tightened.
A-40 PREP ARA TION PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-41 PREP ARA TION SWIVEL ST AND ■ Image shown may differ from your TV . After installing the TV , you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ■ The TV can be installed in various ways such as on a wall, or on a desktop etc.
A-42 PREP ARA TION PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ( POWER) LIGHT ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby . Y ou can turn the light of the remote control button on or of f.
A-43 PREP ARA TION 1 1 1 0 to 9 number button (Space) LIST Q.VIEW Selects a programme. Selects numbered items in a menu. Opens an empty space on the screen keyboard. Displays the programme table. ( ► p.55) Returns to the previously viewed programme.
A-44 PREP ARA TION PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones.
A-45 PREP ARA TION PLASMA TV MODELS : 50/60PK5 ** , 50/60PK7 *** , 50/60PK9 *** , 50/60PX9 *** This item is not included for all models. * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Do not use excessive force.
A-46 PREP ARA TION PREP ARA TION Power/Standby Indicator • Illuminates red in standby mode. • The lighting is of f while the TV remains on. Intelligent Sensor Adjusts picture accord- ing to the surrounding conditions Only 50/60PK5 ** Remote Control Sensor FRONT P ANEL CONTROLS ■ Image shown may differ from your TV .
A-47 PREP ARA TION Only 50/60PK7 *** , 50/60PK9 *** , 50/60PX9 *** INPUT MENU OK VOLUME PROGRAMME POWER T ouch Button Y ou can use the desired button function by touching. Power/Standby Indicator • Illuminates red in standby mode. • The lighting is of f while the TV remains on.
A-48 PREP ARA TION PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC po wer . Never attempt to operate the TV on DC power . LAN Network connection for AccuWeather , Picasa, Y ouT ube, etc.
A-49 PREP ARA TION ■ Image shown may differ from your TV . When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully , the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
A-50 PREP ARA TION PREP ARA TION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV . After connecting the cables as necessary , install Cable Holder as shown and bundle the cables. In case of the LAN cable, install as shown to reduce the electromagnetic wave.
A-51 PREP ARA TION SWIVEL ST AND ■ Image shown may differ from your TV . After installing the TV , you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ■ Image shown may differ from your TV .
A-52 PREP ARA TION PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-53 PREP ARA TION REMOTE CONTROL KEY FUNCTIONS (Only 50/60PK5 ** , 50/60PK7 *** , 50/60PK9 *** ) When using the remote control, aim it at the remote control sensor on the TV . Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.
A-54 PREP ARA TION PREP ARA TION 1 1 TELETEXT BUTTONS SUBTITLE These buttons are used for teletext. For further details, see the ‘T eletext’ section. ( ► p.177 ) Recalls your preferred subtitle in digital mode. 1 See a list of A V devices connected to TV .
A-55 PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones. ■ Close cover .
A-56 PREP ARA TION PREP ARA TION REMOTE CONTROL KEY FUNCTIONS (Only 50/60PX9 *** ) When using the remote control, aim it at the remote control sensor on the TV . ( POWER) LIGHT ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby .
A-57 PREP ARA TION 1 1 1 0 to 9 number button (Space) LIST Q.VIEW Selects a programme. Selects numbered items in a menu. Opens an empty space on the screen keyboard. Displays the programme table. ( ► p.55) Returns to the previously viewed programme.
A-58 PREP ARA TION PREP ARA TION Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5 V AAA batteries. Do not mix old or used batter- ies with new ones.
A-59 PREP ARA TION Simple Remote Control (Only 50/60PK9 ***, 50/60PX9 *** ) ( POWER) TV/INPUT VOLUME UP /DOWN MUTE Programme UP/DOWN Switches the TV on from standby or of f to standby . External input mode rotate in regular sequence. ( ► p.57 ) Adjusts the volume.
Downloaded From TV-Manual.com Manuals.
1 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP ANTENNA CONNECTION ■ For optimum picture quality , adjust antenna direction. ■ An antenna cable and converter are not supplied. ■ T o prevent damage do not connect to the mains outlet until all connections are made between the devices.
2 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH A COMPONENT CABLE ■ T o avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47/55LE7 *** models.
3 EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI CABLE NOTE ► The TV can receive video and audio signals simultaneously when using an HDMI cable. ► If the DVD does not support Auto HDMI, you must set the output resolution appropriately . ► Check that your HDMI cable is High Speed HDMI Cable.
4 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE 1 Connect the digital set-top box or the DVI out- put of the PC to HDMI/DVI IN 1(DVI) jack on the TV . 2 Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV .
5 EXTERNAL EQUIPMENT SETUP CONNECTING WITH A EURO SCART CABLE Scart Input Output Video Audio RGB Video, Audio AV 1 OOO Analogue TV , Digital TV NOTE ► Any Euro scart cable used must be signal shielded. ► When watching digital TV in 3D imaging mode, monitor out signals cannot be output through the SCART cable.
6 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP USB SETUP 1 Connect the USB device to the USB IN 1 or USB IN 2 jack on the TV . 2 After connecting the USB IN 1 or USB IN 2 jack, you use the USB function. ( ► p.90) CONNECTING WITH AN RF CABLE T o avoid picture noise (interference), allow adequate distance between the VCR and TV .
7 EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN RCA CABLE NOTE ► If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV .
8 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability , meaning that the PC adjusts automatically to the TV's set- tings. 1 Connect the RGB output of the PC to the RGB IN (PC) jack on the TV .
9 EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP Y ou can listen the sound through the headphone. NOTE ► AUDIO menu items are disabled when connecting a headphone. ► When changing A V MODE with a headphone connected, the change is applied to video but not to audio.
10 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP DIGIT AL AUDIO OUT SETUP Sending the TV’ s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGIT AL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
11 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT WIRELESS CONNECTION (Except for 32/37/42LD4 *** ) LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately .
12 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP SUPPORTED DISPLA Y RESOLUTION RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode Plasma TV Models Resolution Horizontal Frequency (kHz) V ertical Frequency (Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.
13 EXTERNAL EQUIPMENT SETUP RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode LCD TV Models / LED LCD TV Models Resolution Horizontal Frequency (kHz) V ertical Frequency (Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.
14 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP NOTE ► Avoid keeping a fixed image on the set’ s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. ► There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode.
15 EXTERNAL EQUIPMENT SETUP SCREEN SETUP FOR PC MODE Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. Screen Reset • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
16 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP Automatically adjusts the picture position and minimizes image instability . After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
17 EXTERNAL EQUIPMENT SETUP T o view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] Selecting Resolution • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
18 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually .
19 EXTERNAL EQUIPMENT SETUP NETWORK SETUP This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. CAUTION ► Do not connect a modular phone cable to the LAN port.
20 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP Wired Network Setup 1 Select NETWORK . 2 Select Network Setting . 3 Select Wired . 4 If you already set Network Setting: Select Resetting . The new connection settings resets the current network settings.
21 EXTERNAL EQUIPMENT SETUP ■ This feature requires an always-on broadband internet connection. ■ Y ou do not need to connect to a PC to use this function. ■ If Network Setting is not working, check your network conditions. Check the LAN cable and make sure your router has DHCP turned on if you wish to use the Auto Setting.
22 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP NOTE ► For more information about Netcast setup and troubleshooting, visit http://lgknowledgebase. com . Search for Netcast. ► Use a standard LAN cable with this TV . Cat5 or better with a RJ45 connector .
23 EXTERNAL EQUIPMENT SETUP The LG Wireless LAN for Broadband/DLNA Adaptor , allows the TV to connect to a wireless lan network. The network configuration and connection method may vary depending on the equipment in use and the network environment.
24 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. Wireless Network Setup 6 Scan the all available AP (Access Point) or wireless routers within range and display them as a list.
25 EXTERNAL EQUIPMENT SETUP If you want to connect the AP (Access Point) or router with PIN, use this feature. When a security code is already set PIN (Personal Identification Number) ■ PIN number is the unique 8 digit number of the dongle. Connecting with PIN mode Insert PIN number at the AP webpage and press ‘Connect’ button.
26 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it’s available to use your access point or wireless router within 120 counts.
27 EXTERNAL EQUIPMENT SETUP This is the method of communicating directly with the machine to communicate without AP . This is the same as connecting two PCs with a cross cable. Ad-hoc Mode Select the wireless network setting type. Select the wireless network setting type.
28 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP 1 Select NETWORK . 2 Select Network Status . 3 Check the network status. Network Status ■ Setting : Return to the network setting menu or wireless network setting type menu. ■ T est : T est the current network status after setting the network.
29 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL TURNING ON THE TV When your TV is turned on, you will be able to use its features.
30 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL Aspect Ratio : Selects your desired picture for- mat. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After complet- ing Zoom Setting, the display goes back to Q.
31 W A TCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Y our TV's OSD (On Screen Display) may dif fer slightly from that shown in this manual. • Press the RED button, you can check the Customer Support menu. • Press the GREEN button, you can check the Simple Manual menu.
32 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL LOCK OK Move ● Set Password ● Lock System : Off ● Block Programme ● Parental Guidance : Blocking Off ● Input Block ● .
33 W A TCHING TV / PROGRAMME CONTROL AUT O PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. The maximum number of programmes that can be stored is 1,000.
34 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. If you want to select the Cable , 1 Select SETUP . 2 Select Auto T uning .
35 W A TCHING TV / PROGRAMME CONTROL ► ► ■ When you select the Quick, Start Frequency(kHz) : 1 14000 Quick End Frequency(kHz) : 862000 Network : Auto OK Close Setting Start Frequency(kHz) : 1 14000 Quick End Frequency(kHz) : 862000 Network : Auto OK Close Setting • If you wish to keep on auto tuning, select Start using the button.
36 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ When you select the Full, Search every available signal. Full OK Close • If you wish to keep on auto tuning, select Start using the button. Then, press the OK button. Otherwise select Close .
37 W A TCHING TV / PROGRAMME CONTROL The following values are needed in order to search all available programmes quickly and correctly . The commonly used values are provided as "default". However , for correct settings, please inquire of the cable service provider .
38 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL CABLE DTV SETTING (IN CABLE MODE ONL Y) The range that a user can select from the Service Operator menu differs depending on numb.
39 W A TCHING TV / PROGRAMME CONTROL OK Move ● Auto Tuning ● Manual Tuning ● Programme Edit ● Booster : Off ● CI Information SETUP ● Manual Tuning MANUAL PROGRAMME TUNING Manual T uning lets you manually add a programme to your programme list.
40 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL OK Move ● Auto Tuning ● Manual Tuning ● Programme Edit ● Booster : Off ● CI Information ● Cable DTV Setting SETUP ● Manual Tuning • Press the MENU/EXIT button to return to normal TV viewing.
41 W A TCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual T uning lets you manually tune and arrange the stations in whatever order you desire. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
42 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. Y ou can assign a station name with five characters to each programme number .
43 W A TCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.
44 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL This function enables you to delete or skip the stored programmes. Y ou can also move some channels and use other programme numbers.
45 W A TCHING TV / PROGRAMME CONTROL ■ Auto Sort • After activating Auto Sort once, you can no longer edit programmes. 1 Start Auto Sort. ■ Skipping a programme number • When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing.
46 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ Selecting favourite programme group 1 Select your desired programme. 2 Display a pop-up window where Favourite group can be changed. 3 Select a Favourite group. Downloaded From TV-Manual.
47 W A TCHING TV / PROGRAMME CONTROL BOOSTER If reception is poor select Booster to "On". When the signal is strong, select "Off". • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
48 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL CI [COMMON INTERF ACE] INFORMA TION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu.
49 W A TCHING TV / PROGRAMME CONTROL SOFTW ARE UPDA TE Y ou can update the TV with the latest software to enhance the product operation and/or add new features. Y ou can update the software by connecting the TV directly to the software update server .
50 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ When setting “Software Update” Occasionally , a transmission of updated digital software infor- mation will result in the following menu on the TV screen.
51 W A TCHING TV / PROGRAMME CONTROL PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. 1 Select Customer Support .
52 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL SIGNAL TEST This function enables you to view information on the Manufacturer , Model/T ype, Serial Number and Software V ersion. This displays the information and signal strength of the tuned *MUX.
53 W A TCHING TV / PROGRAMME CONTROL PRODUCT/SER VICE INFORMA TION This function is a customer support function that can see product/service information and customer service center information. • Press the MENU/EXIT button to return to normal TV viewing.
54 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL SIMPLE MANUAL Y ou can easily and effectively access the TV information by viewing a simple manual on the TV . During the Simple Manual operation, audio will be muted. • Press the EXIT button to return to normal TV viewing.
55 W A TCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST Y ou can check which programmes are stored in the memory by displaying the programme list. Displayed when the Locked Programme. Mini Glossary ■ Displaying programme LIST ■ Selecting a programme in the programme list • Y ou may find some blue programmes.
56 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ Displaying the favourite programme list ■ Paging through a programme list 1 T urn the pages. 2 Return to normal TV viewing. 1 Display the Favourite Programme List. BLUE T urn the programme edit.
57 W A TCHING TV / PROGRAMME CONTROL • Antenna or Cable : Select it when watch- ing the DTV/RADIO/TV . • USB : Select it when using USB depends on connector . • AV : Select it when watching the VCR or external equipment. • Component : Select it when using the DVD or the Digital set-top box depends on connector .
58 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1 Select Input Label .
59 W A TCHING TV / PROGRAMME CONTROL OK Move ● Language(Language) ● Country : Ireland ● Disability Assistance ● Power Indicator ● Data Service : MHEG ● Factory Reset ● Set ID : 1 ● ●.
60 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
61 W A TCHING TV / PROGRAMME CONTROL • Press the EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. ■ When MHP Auto Start is set to On 1 Display the MHP . RED ■ When MHP Auto Start is set to Off 1 Display the MHP Application List.
62 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function.
63 W A TCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. NOTE ► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.
64 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL Disc playback Control connected A V devices by pressing the , OK, ► , ▀ , l l , ◄◄ and ►► buttons. Direct Play After connecting A V devices to the TV , you can directly control the devices and play media without additional set- tings.
65 W A TCHING TV / PROGRAMME CONTROL SIMPLINK Menu Press the button and then OK button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV pro- gramme regardless of the current mode. DISC playback : Select and play connected discs.
66 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL Off Cinema Game Sport A V MODE Y ou can select the optimal images and sounds when connecting A V devices to external input. Off Disables the A V MODE. Cinema or Cinema Optimizes video and audio for watching movies.
67 W A TCHING TV / PROGRAMME CONTROL OK Move ● Language(Language) ● Country : UK ● Disability Assistance ● Power Indicator ● Factory Reset ● Set ID : 1 ● Mode Setting : Home Use ● ● .
68 NETCAST NETCAST LEGAL NOTICE 1 Select NETWORK . 2 Select Legal Notice . 3 Check Legal notice. NETWORK OK Move • Network Setting : Wired • Network Status : Internet is connected • Legal Notice.
69 NETCAST IMPORT ANT NOTICE RELA TING TO NETWORK SER VICE IMPORT ANT NOTICE RELA TING TO NETWORK SER VICES All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws.
70 NETCAST NETCAST NETCAST MENU These services are provided by separate Content Provider . Content can be changed or deleted depending on Content Provider . All content furnished by the service provider are subject to change at any time including, but not limited to the removal of content.
71 NETCAST YOUTUBE Y ouT ube is a video sharing website where users can upload, view , and share video clips. Y ouT ube Screen Components 1 Y ouT ube menu 2 Videos list 1 2 RED Set the option menu. Return to Netcast menu. Return to TV viewing. NOTE ► When you press the Q.
72 NETCAST NETCAST ● Home : Y ou can watch the popular video in real time. ● Featured : The featured videos list will be displayed. ● Popular : The best rated videos list from Y ouTube server will be displayed. ● Most Viewed : The most viewed videos list will be displayed.
73 NETCAST ACCUWEA THER Accuweather is the programme to view the weather of the city the user wants. AccuW eather Screen Components 1 AccuWeather menu 2 Weather list by city 3 Corresponding buttons on the remote control ● Home : The weather of selected city is displayed.
74 NETCAST NETCAST PICASA Picasa is an application from Google that appreciates digital image files. Picasa Screen Components 1 Picasa menu 2 Photos list 3 Corresponding buttons on the remote control 1 2 3 Select the desired photo. The selected photo file is displayed.
75 NETCAST ● Home : The featured photos list will be displayed. ● Friends : Y ou can register users with the pictures you want as friends. Y ou can add up to 10 friends. ● Search : The keypad/keyboard menu will be displayed. ● My Photos : Y ou can view the pictures uploaded to the Web.
76 T O USE THE BLUET OOTH (Except for 32/37/42LE4 *** , 32/37/42/47/55LE5 *** , 42/47LE73 ** , 32/37/42LD4 *** , 32/37/42/47/55LD6 *** , 32/42/47LD7 *** , 32/37/42LD8 *** , 42/47LX6 *** , 47/55LX9 *** , 32/37/42/47/55L V5 *** , 50/60PK5 ** , 50/60PX9 *** ) TO USE A BLUETOOTH BLUET OOTH? Bluetooth is a short distance networking technology using 2.
77 TO USE A BLUETOOTH SETTING THE BLUET OOTH If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images from an external device and view them on the TV , listen to music from cell phone(Bluetooth device), you can use the wireless communication without having to connect any cables.
78 T O USE A BLUETOOTH TO USE A BLUETOOTH Y ou can only search for the new Bluetooth headset only in the Disconnected condition. When you run the search, it will show you the list of all Bluetooth headsets responding. After new Bluetooth device is searched, the PIN number is validated to connect the device.
79 TO USE A BLUETOOTH Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top. When connecting to the Bluetooth device already registered, you can select and connect directly without any PIN validation.
80 T O USE A BLUETOOTH TO USE A BLUETOOTH • Press the EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
81 TO USE A BLUETOOTH NOTE ► LG recommends the following headset mod- els. - Plantronics VOY AGER-855 / SONY HBH- DS970, HBH-DS980 / Motorola S605 There might be an audio delay , depending on the buf fer memory size of the headset. ► The stereo/mono headset officially certified to be Bluetooth compatible can be searched and connected.
82 T O USE A BLUETOOTH TO USE A BLUETOOTH REMOVE THE BLUET OOTH DEVICE When 12 devices are registered, you cannot register any more devices, and the external device will no longer be able to pair up with the TV . In this case, you should delete one (disconnect first if a device is connected to the TV) and then you can register another device.
83 TO USE A BLUETOOTH This function provides the My Bluetooth Information to the user . "Edit" will be available when TV is not connected with any device.
84 T O USE A BLUETOOTH TO USE A BLUETOOTH RECEIVING PHOT OS FROM EXTERNAL BLUET OOTH DEVICE • When you select Hide with the ꕌꕍ < > button, the OSD will disappear .
85 TO USE A BLUETOOTH LISTENING T O THE MUSICS FROM EXTERNAL BLUET OOTH DEVICE For details on how to listen to the musics from the external Bluetooth device to TV , refer to the user manual of the applicable device. Y ou should use the Bluetooth device supporting A2DP(as external device).
86 3D IMAGING 3D IMAGING (Only 42/47LX6 *** , 47/55LX9 *** , 50/60PX9 *** ) This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player . Y ou need such a device to watch the TV in 3D. The 3D TV displays two separate pictures formatted for each eye.
87 3D IMAGING WHEN USING 3D GLASSES ► 3D glasses are sold separately . Refer to the 3 D glasses manual for operating instructions. ► Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles. ► Do not store the 3D glasses in hot or cold locations.
88 3D IMAGING 3D IMAGING W A TCHING 3D IMAGING 1 Play the video produced in 3D. Refer to the following for the supported imaging. For 3D video feed that is input in the HDMI (V . 1.4 with 3D) Frame Packing format, it is automatically switched to 3D. Media contents and a player need to support HDMI (V .
89 3D IMAGING NOTE ► If you select 3D mode, "Power indicator" is turned off automatically . (LCD TV/LED LCD TV only) ► While watching 3D imaging, you cannot adjust video/audio settings using the menu. (LCD TV/LED LCD TV only) ► Some menus may not work while watching the TV in 3D.
90 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically . “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat- ed or while the Bluetooth Headset is connected.
91 TO USE A USB OR PC DEVICE Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized.
92 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE About DLNA This TV can display and play many types of movie, photo and music files from your DLNA server and has been certified by DLNA for photos.
93 TO USE A USB OR PC DEVICE Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. Requirement PC system before you install Nero MediaHome.
94 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. 2 Click Network icon on the left and define your network name in the Network name field.
95 TO USE A USB OR PC DEVICE Playing back shared contents Y ou can display and play movie, photo and music content stored on your computer or other DLNA media servers. 1 Start the server on your computer or other device that connected on your home network.
96 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE MOVIE LIST Y ou can play movie files on a USB or PC storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV . Displays the movies in the USB folder and supports Play .
97 TO USE A USB OR PC DEVICE Supported DivX file .divx .avi Video Audio DivX3.1 1 DivX4 DivX5 DivX6 Advanced Simple Profile (e.g. 720p/1080i) XViD H.264 / A VC Main Profile@ Level 4.1 High Profile@ Level 4.1 (e.g. 720p60, 1080i60, 1080p30) MPEG-1Layer I, II MPEG-1 Layer III(MP3) Dolby Digital .
98 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE Screen Components Moves to upper level folder Current page/T otal pages Corresponding buttons on the remote control Contents under the folder focused on 1 Current page/ total pages of contents under the folder focused on 1 1 3 4 5 2 Select Movie List.
99 TO USE A USB OR PC DEVICE Movie Selection ■ When playing movie files • Use the P button to navigation in the movie page. 1 Select the target folder or drive. 2 Select the desired movie title. 3 Movie files are played. Page 1/1 Movie List Drive1 Page 1/1 USB1 External Mark MARK Play Page Change Move P RED Change device.
100 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE NOTE ► In the case of files not supported, a message regarding non-supported file is displayed. ■ When selected movie files are played • When one or more movie files are marked, the marked movies will be played in sequence.
101 TO USE A USB OR PC DEVICE RED Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically . GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode .
102 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE ► 01:02:30 / 02:30:25 ◄► Set Video Play . Set Video. Set Audio. Close Using the Movie List function, play NOTE ► Option values changed in Movie List does not affect Photo List and Music List .
103 TO USE A USB OR PC DEVICE ■ Stop the playing movie file. ► Press the PLA Y ( ► ) button to return to normal playback. II During playback, press the Pause ( II ) button. ■ Still screen is displayed. ■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state.
104 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE ► Picture Size : Selects your desired picture format during movie play . ► A udio Language : Changes the Language Group of the audio during movie play . Files with a single audio track cannot be selected.
105 TO USE A USB OR PC DEVICE ■ When you select the Set Video, 1 Select Picture Mode or T ruMotion. 2 Make appropriate adjustments. (Refer to p. 139 to 148) Set Video.
106 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE ■ When you select the Set Audio, 1 Select Sound Mode, Auto V olume, Clear V oice II or Balance.
107 TO USE A USB OR PC DEVICE Y ou can view photo files on USB or PC storage device. The On Screen Display may be different from your TV . Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode.
108 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE RED Change device. GREEN Repeatedly , press the GREEN button to converted to Music List->Movie List . YELLOW A method to view in 5 large thumbnail or simple list. BLUE Convert to Mark Mode . EXIT Return to normal TV viewing.
109 TO USE A USB OR PC DEVICE ■ When selected photo files are displayed • When one or more photos are marked, you can view each marked photo or a slide show of the marked photos. If no photos are marked, you can view every individual photo in the folder or a slide show of all photos in the folder .
11 0 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE RED Display the selected photo file. GREEN Mark all photo files on the screen. YELLOW Deselect all marked photo files. BLUE Exit the Mark Mode . EXIT Return to normal TV viewing. Using the remote control Downloaded From TV-Manual.
111 TO USE A USB OR PC DEVICE How to view photo 2/13 ◄ ► ◄► Detailed operations are available on full-sized photo view screen. • Use the P button to navigation in the photo page. 1 Select the target folder or drive. 2 Select the desired photos.
11 2 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE • Use button to select the previous or next photo. • Use button to select and control the menu on the full-sized screen. 4 Select the Slideshow , BGM , ꘤ (Rotate) , / , , Option, Hide or Exit .
11 3 TO USE A USB OR PC DEVICE 2/13 ◄ ► ◄► Set Photo View . Set Video. Set Audio. Close Using the Photo List function NOTE ► Option values changed in Movie List does not affect Photo List and Music List . ► Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List .
11 4 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE ■ When you select the Set Photo View , Drive1 Previous Set Photo View . BGM Fast Slide Speed ◄ ► On ● Repeat ◄ ► Off ● Random ◄ ► 1 Select Slide Speed or BGM. 2 Make appropriate adjustments.
11 5 TO USE A USB OR PC DEVICE ■ When you select the Set Video, 1 Select Picture Mode or T ruMotion. 2 Make appropriate adjustments. (Refer to p. 139 to 148) Set Video.
11 6 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE ■ When you select the Set Audio, 1 Select Sound Mode, Auto V olume, Clear V oice II or Balance.
11 7 TO USE A USB OR PC DEVICE MUSIC LIST Y ou can play music files on USB or PC storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit.
11 8 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE Music Selection ■ When playing music files 1 Select the target folder or drive. 2 Select the desired music title. 3 Music files are played. • Use the P button to navigate up/down in the music page.
11 9 TO USE A USB OR PC DEVICE ■ When selected music files are played Page 1/1 Music List Drive1 Page 1/1 001. - B01.mp3 00:00 002. -B02.mp3 00:00 003.
120 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE RED Display the selected music file. GREEN Mark all music files on the screen. YELLOW Deselect all marked music files. BLUE Exit the Mark Mode . EXIT Return to normal TV viewing. Using the remote control Downloaded From TV-Manual.
121 TO USE A USB OR PC DEVICE Set Audio Play . Set Audio. Close Using the Music List function, play NOTE ► Option values changed in Movie List does not affect Photo List and Music List. ► Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
122 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE Using the remote control ■ Stop the playing music file. ► Press the PLA Y ( ► ) button to return to normal playback. II When you press the Pause ( II ) button while playing the file, the playback will be paused.
123 TO USE A USB OR PC DEVICE ■ When you select the Set Audio Play , Previous Set Audio Play . On Repeat ◄ ► Off Random ◄ ► 1 Select Repeat or Random.
124 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE ■ When you select the Set Audio, 1 Select Sound Mode, Auto V olume, Clear V oice II or Balance.
125 TO USE A USB OR PC DEVICE NOTE ► A damaged or corrupted music does not play but displays 00:00 in playtime. ► A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. ► If you press OK, ■ buttons, screen saver is stopped.
126 T O USE A USB OR PC DEVICE TO USE A USB OR PC DEVICE DIVX REGISTRA TION CODE Confirm the DivX registration code number of the TV . Using the registration number , movies can be rented or purchased at www .divx.com/vod. With a DivX registration code from other TV , playback of rented or purchased DivX file is not allowed.
127 TO USE A USB OR PC DEVICE DEACTIV A TION The purpose of deactivation is to allow deactivation of devices for users who have activated all the available devices through the web_server and are blocked from activating more devices.
128 GAME GAME GAME Allows you to enjoy the games installed on the TV . • Press the EXIT button to return to normal TV viewing. 1 Select GAME . 2 Select the desired game. 3 Enter the selected game mode. Exit Customer Support Simple Manual Press OK( ) to set programme settings.
129 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) EPG(ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
130 EPG (ELECTRONIC PROGRAMME GUIDE) EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) Switch on/off EPG Select a programme 1 Switch on or off EPG. or 1 Select desired programme. Button Function in NOW/NEXT Guide Mode Y ou can view a programme being broadcasted and one scheduled to follow .
131 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) Button Function in 8 Day Guide Mode RED Change EPG mode. GREEN Enter Date setting mode. YELLOW Enter Manual T imer mode.
132 EPG (ELECTRONIC PROGRAMME GUIDE) EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) Button Function in Date Change Mode Button Function in Extended Description Box DTV 1 YLE TV1 25 25 Nov . 2008 10:05 Fia World T ouring Car Chanpionship Tue. 25 Nov .
133 EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) Button Function in Record/Remind Setting Mode Sets a start or end time, programme for recording, and sets a start time, programme for the reminder with the end time grayed out.
134 EPG (ELECTRONIC PROGRAMME GUIDE) EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGIT AL MODE) Button Function in Schedule List Mode If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time.
135 PICTURE CONTROL PICTURE CONTROL • 16:9 The following selection will allow you to adjust the pic- ture horizontally , in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).
136 PICTURE CONTROL PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio. • 14:9 Y ou can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down.
137 PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage.
138 PICTURE CONTROL PICTURE CONTROL ENERGY SA VING It reduces the TV’ s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. Y ou can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode .
139 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Optimizes power consumption. (Plasma TV Only) Cinema or Cinema Optimizes video for watching movies.
140 PICTURE CONTROL PICTURE CONTROL • Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category . • When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
141 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight (LCD TV/LED LCD TV only) T o control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended.
142 PICTURE CONTROL PICTURE CONTROL • Benefits of using Backlight (LCD TV/LED LCD TV only) - The electricity consumption is reduced by up to 60 %. - The black brightness is reduced. (As the black has greater depth, you can enjoy a better quality definition.
143 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Y ou can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
144 PICTURE CONTROL PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.
145 PICTURE CONTROL *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium(LCD TV/LED LCD TV only)/ High) ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker .
146 PICTURE CONTROL PICTURE CONTROL Colour Gamut ( LCD TV/LED LCD TV : Advanced Control & Plasma TV : Advanced Control/ Expert Control) (Wide/Standard) • Standard : Mode to use original colour area regardless of the display char- acteristics. • Wide: Mode to use maximum colour area of the TV display .
147 PICTURE CONTROL OK Move PICTURE Sh Sh Sh •S h •S h •S h •S h Sh Sh arpn arpn arpn arpn arpn arpn arpn ap p ess ess ess ess ess ess ess 70 70 70 70 70 70 70 70 70 • Colour 60 • T int 0 • Colour T emp.
148 PICTURE CONTROL PICTURE CONTROL TRUMOTION • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1 Select PICTURE . 2 Select T ruMotion . 3 Select Low , High, User or Off . 4 Make appropriate adjustments.
149 PICTURE CONTROL LED LOCAL DIMMING (Only 32/37/42LE4 *** , 42/47/55LE5 *** , 42/47/55LE75 ** , 42/47/55LE78 ** , 42/47/55LE79 ** , 42/47/55LE8 *** , 42/47LX6 *** , 47/55LX9 *** , 42/47/55L V5 *** ) After analyzing the signal of the input video by areas of the screen, it adjusts the backlight to improve the contrast ratio.
150 PICTURE CONTROL PICTURE CONTROL POWER INDICA T OR Adjust the power/standby indicator light on the front of the TV . Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode.
151 PICTURE CONTROL IMAGE STICKING MINIMIZA TION (ISM) METHOD A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
152 PICTURE CONTROL PICTURE CONTROL MODE SETTING We recommend setting the TV to “ Home Use ” mode for the best picture in your home environment. “ Store Demo ” mode is an optimal setting for displaying at stores. • Press the MENU/EXIT button to return to normal TV viewing.
153 PICTURE CONTROL DEMO MODE It is not possible to use Demo Mode in Home Use mode. In Store Demo , Demo Mode is automatically set to On . Once Demo Mode is set to Off in Store Demo , Demo Mode does not run and only the screen is reset. The screen is reset automatically after 5 minutes in Demo Mode .
154 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL AUT O VOLUME LEVELER Auto V olume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the programme is changed.
155 SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better . Adjustment for Clear V oice Level With selecting On • Press the MENU/EXIT button to return to normal TV viewing.
156 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE Y ou can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the T reble, Bass.
157 SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE INFINITE SOUND Select this option to sound realistic. • Press the MENU/EXIT button to return to normal TV viewing.
158 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL BALANCE Y ou can adjust the sound balance of the speakers to preferred levels. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
159 SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP Y ou can adjust the TV internal speaker status. In AV , COMPONENT , RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
160 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGIT AL MODE ONL Y) When different audio types exist in an input signal, this function allows you to select the audio type you want. • Press the MENU/EXIT button to return to normal TV viewing.
161 SOUND & LANGUAGE CONTROL SELECTING DIGIT AL AUDIO OUT This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital.
162 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL Settings of the selected Sound Mode return to the default factory settings. AUDIO RESET • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
163 SOUND & LANGUAGE CONTROL AUDIO DESCRIPTION (IN DIGIT AL MODE ONL Y) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio.
164 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL I/II ■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono.
165 SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONL Y) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received.
166 SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTR Y SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. * If you want to change Language/ Country selection • Press the MENU/EXIT button to return to normal TV viewing.
167 SOUND & LANGUAGE CONTROL The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast.
168 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL < Audio Language Selection > ► When two or more audio languages are broadcast, you can select the audio language. - The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service pro- vider .
169 TIME SETTING The clock is set automatically when receiving a digital signal in Auto mode. Y ou can set the clock manually in Manual mode. Y ou must set the time correctly before using on/off timer function.
170 TIME SETTING TIME SETTING AUT O ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. T wo hours after the TV is switched on by the on time function it will automatically switch back to stand- by mode unless a button has been pressed.
171 TIME SETTING SLEEP TIMER SETTING Y ou do not have to remember to switch the TV of f before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. • When you switch the TV of f, the preset sleep timer is cancelled.
172 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL / RA TINGS SET P ASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. When France is selected for Country , password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’,’2’,’3’,’4’.
173 P ARENT AL CONTROL / RA TINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ” On ”. Enter a password to watch a blocked programme.
174 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL (IN DIGIT AL MODE ONL Y) • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. This function operates according to information from the broadcasting station.
175 P ARENT AL CONTROL / RA TINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in Lock System ” On ” . • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
176 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL / RA TINGS KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off.
177 TELETEXT TELETEXT This feature is not available in all countries. Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen. T wo page numbers, TV station name, date and time are displayed on the screen headline.
178 TELETEXT TELETEXT T OP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection With the blue button you can progress from block to block.
179 TELETEXT SPECIAL TELETEXT FUNCTIONS ■ Index Select the each index page. ■ Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number .
180 DIGIT AL TELETEXT DIGIT AL TELETEXT *This function works in UK, Ireland only . The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
181 APPENDIX APPENDIX TROUBLESHOOTING The TV does not operate properly . The remote control does not work ■ Check to see if there is any object between the TV and the remote con- trol causing an obstruction. Ensure you are pointing the remote control directly at the TV .
182 APPENDIX APPENDIX The audio function does not work. Picture OK & No sound ■ Press the + or - button. ■ Sound muted? Press MUTE button. ■ T ry another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one of the speakers ■ Adjust Balance in menu option.
183 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV . Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
184 APPENDIX APPENDIX PRODUCT SPECIFICA TIONS ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LE5 *** 32LE5500-ZA / 32LE550N-ZA 32LE5800-ZA / 32LE5900-ZA 32LE5510-ZB / 32LE551N-ZB 32LE5810-ZB / 32LE5910-ZB Dimensions (Width x Height x Depth) with stand 784.
185 APPENDIX MODELS 42LE5 *** 42LE5500-ZA / 42LE550N-ZA 42LE5800-ZA / 42LE5900-ZA 42LE5510-ZB / 42LE551N-ZB 42LE5810-ZB / 42LE5910-ZB Dimensions (Width x Height x Depth) with stand 1016.0 mm x 692.0 mm x 270.0 mm 1016.0 mm x 692.0 mm x 270.0 mm without stand 1016.
186 APPENDIX APPENDIX MODELS 55LE5 *** 55LE5500-ZA / 55LE550N-ZA 55LE5800-ZA / 55LE5900-ZA 55LE5510-ZB / 55LE551N-ZB 55LE5810-ZB / 55LE5910-ZB Dimensions (Width x Height x Depth) with stand 1306.0 mm x 867.0 mm x 328.0 mm 1306.0 mm x 867.0 mm x 328.0 mm without stand 1306.
187 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LE7 *** 32LE7500-ZA / 32LE750N-ZA 32LE7800-ZA / 32LE7900-ZA 32LE7510-ZB / 32LE751N-ZB 32LE7810-ZB / 32LE7910-ZB Dimensions (Width x Height x Depth) with stand 786.
188 APPENDIX APPENDIX MODELS 42LE7 *** 42LE7500-ZA / 42LE750N-ZA / 42LE7800-ZA / 42LE7900-ZA 42LE7510-ZB / 42LE751N-ZB / 42LE7810-ZB / 42LE7910-ZB 42LE7300-ZA / 42LE730N-ZA / 42LE7380-ZA / 42LE7390-ZA Dimensions (Width x Height x Depth) with stand 1018.
189 APPENDIX MODELS 55LE7 *** 55LE7500-ZA / 55LE750N-ZA 55LE7800-ZA / 55LE7900-ZA 55LE7510-ZB / 55LE751N-ZB 55LE7810-ZB / 55LE7910-ZB Dimensions (Width x Height x Depth) with stand 1306.0 mm x 868.1 mm x 328.0 mm 1306.0 mm x 868.1 mm x 328.0 mm without stand 1306.
190 APPENDIX APPENDIX MODELS 42LE8 *** 42LE8500-ZA / 42LE850N-ZA 42LE8800-ZA / 42LE8900-ZA 42LE8510-ZB / 42LE851N-ZB 42LE8810-ZB / 42LE8910-ZB Dimensions (Width x Height x Depth) with stand 1013.3 mm x 705.8 mm x 235.5 mm 1013.3 mm x 705.8 mm x 235.5 mm without stand 1013.
191 APPENDIX MODELS 55LE8 *** 55LE8500-ZA / 55LE850N-ZA 55LE8800-ZA / 55LE8900-ZA 55LE8510-ZB / 55LE851N-ZB 55LE8810-ZB / 55LE8910-ZB Dimensions (Width x Height x Depth) with stand 1292.6 mm x 875.4 mm x 31 1.9 mm 1292.6 mm x 875.4 mm x 31 1.9 mm without stand 1292.
192 APPENDIX APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LD6 *** 32LD650-ZC / 32LD650N-ZC 32LD680-ZC / 32LD690-ZB 32LD651-ZB / 32LD651N-ZB 32LD681-ZB / 32LD691-ZB Dimensions (Width x Height x Depth) with stand 797.
193 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 42LD6 *** 42LD650-ZC / 42LD650N-ZC 42LD680-ZC / 42LD690-ZB 42LD651-ZB / 42LD651N-ZB 42LD681-ZB / 42LD691-ZB Dimensions (Width x Height x Depth) with stand 1024.
194 APPENDIX APPENDIX MODELS 55LD6 *** 55LD650-ZC / 55LD650N-ZC 55LD680-ZC / 55LD690-ZB 55LD651-ZB / 55LD651N-ZB 55LD681-ZB / 55LD691-ZB Dimensions (Width x Height x Depth) with stand 1329.0 mm x 872.0 mm x 330.0 mm 1329.0 mm x 872.0 mm x 330.0 mm without stand 1329.
195 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LD7 *** 32LD750-ZA / 32LD750N-ZA 32LD780-ZA / 32LD790-ZA 32LD751-ZB / 32LD751N-ZB 32LD781-ZB / 32LD791-ZB / 32LD752-ZD Dimensions (Width x Height x Depth) with stand 804.
196 APPENDIX APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 47LD7 *** 47LD750-ZA / 47LD750N-ZA 47LD780-ZA / 47LD790-ZA 47LD751-ZB / 47LD751N-ZB 47LD781-ZB / 47LD791-ZB / 47LD752-ZD Dimensions (Width x Height x Depth) with stand 1 144.
197 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LD8 *** 32LD840-ZA / 32LD840N-ZA 32LD880-ZA / 32LD890-ZA Dimensions (Width x Height x Depth) with stand 803.0 mm x 568.0 mm x 212.0 mm without stand 803.
198 APPENDIX APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32L V5 *** 37L V5 *** 32L V5300-ZA / 32L V530U-ZA 32L V530N-ZA / 32L V5380-ZA 37L V5300-ZA / 37L V530U-ZA 37L V530N-ZA / 37L V5380-ZA Dimensions (Width x Height x Depth) with stand 785.
199 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. ■ For the power supply and power consumption, refer to the label attached to the product. MODELS 50PK5 ** 60PK5 ** 50PK590-ZE 60PK590-ZE Dimensions (Width x Height x Depth) with stand 1 171.
200 APPENDIX APPENDIX Digital TV Analogue TV T elevision System DVB-T DVB-C P AL/SECAM B/G/D/K, P AL I/II, SECAM L/L ’ Programme Coverage VHF , UHF VHF: E2 to E12, UHF: E21 to E69, CA TV : S1 to S20.
201 APPENDIX IR CODES *This feature is not available for all models. Code (Hexa) Function Note 95 Energy Saving R/C BUTTON 08 POWER R/C BUTTON(POWER ON/OFF) 0B INPUT R/C BUTT ON 79 RA TIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
202 APPENDIX APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally . Connect the serial port of the control device to the RS-232C jack on the product back panel.
203 APPENDIX ● Language(Language) ● Country : UK ● Disability Assistance ● Power Indicator ● Factory Reset ● Set ID : 1 ● Mode Setting : Home Use ● ● IR B IR B IR B IR B last last last last er : er : er : er : Off Off Off Off OK Move OPTION ● Set ID :1 Set ID Use this function to specify a set ID number .
204 APPENDIX APPENDIX Communication Parameters ■ Baud rate : 9600 bps ( UART ) ■ Data length : 8 bits ■ Parity : None ■ Stop bit : 1 bit ■ Communication code : ASCII code ■ Use a crossed (reverse) cable. T ransmission * [Command 1] : First command to control the TV .
205 APPENDIX 08. Colour (Command: k i) ► T o adjust the screen colour . Y ou can also adjust colour in the PICTURE menu. T ransmission Data Min : 00 t o Max : 64 * Refer to ‘Real data mapping 1’. See page 207. [k][i][ ][Set ID][ ][Data][Cr] Ack [i][ ][Set ID][ ][OK/NG][Data][x] 04.
206 APPENDIX APPENDIX 12. Remote control lock mode ( Command: k m) ► T o lock the front panel controls on the monitor and remote control. T ransmission [k][m][ ][Set ID][ ][Data][Cr] Ack Data 00 : Lock off 01 : Lock on * If you are not using the remote control, use this mode.
207 APPENDIX 20. T une Command (Command: m a) ► Select channel to following physical number . T ransmission Data00 : High channel data Data01 : Low channel data ex.
208 APPENDIX APPENDIX 24 . Input select ( Command: x b) (Main Picture Input) ► T o select input source for main picture. T ransmission Data Structure MSB LSB [x][b][ ][Set ID][ ][Data][Cr] External Input Input Number 23. Control Back Light (Command: m g) (LCD TV/LED LCD TV only) ► T o Control the back light.
209 APPENDIX OPEN SOURCE SOFTW ARE NOTICE The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUT ABLES: Linux kernel 2.6, busybox, e2fsprogs, jfsutils, lzo, msdl-1.
210 APPENDIX APPENDIX ■ pixman: • copyright © 1987, 1988, 1989, 1998 The Open Group • copyright © 1987, 1988, 1989 Digital Equipment Corporation • copyright © 1999, 2004, 2008 Keith Packard • copyright © 2000 SuSE, Inc. • copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
21 1 APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor , Boston, MA 021 10-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
212 APPENDIX APPENDIX 1. Y ou may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro- vided that you conspicuously and appropriately publish on.
213 APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then of fering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
214 APPENDIX APPENDIX NO W ARRANTY 1 1. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, T O THE EXTENT PERMITTED BY APPLICABLE LAW .
215 APPENDIX GNU LESSER GENERAL PUBLIC LICENSE V ersion 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor , Boston, MA 021 10-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
216 APPENDIX APPENDIX Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library .
217 APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather , the intent is to exercise the right to control the distribution of derivative or collective works based on the Library .
218 APPENDIX APPENDIX c) Accompany the work with a written offer , valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
219 APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new prob- lems or concerns.
220 APPENDIX APPENDIX MOZILLA PUBLIC LICENSE V ersion 1.1 --------------- 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party . 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
221 APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.
222 APPENDIX APPENDIX (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file.
223 APPENDIX 6.3. Derivative Works. If Y ou create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this Lice.
224 APPENDIX APPENDIX 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F .R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.
R ecord the model number and serial number of the T V . R ef er to the label on the back cov er and quot e this inf ormation to your dealer when r equiring any ser vice. Model : Serial No. : T rade Mark of the DVB Digital Video Broadcas ting Project (1991 t o 1996) Downloaded From TV-Manual.
デバイスLG Electronics 32/37/42/47/55LV5の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
LG Electronics 32/37/42/47/55LV5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG Electronics 32/37/42/47/55LV5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG Electronics 32/37/42/47/55LV5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG Electronics 32/37/42/47/55LV5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG Electronics 32/37/42/47/55LV5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG Electronics 32/37/42/47/55LV5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG Electronics 32/37/42/47/55LV5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG Electronics 32/37/42/47/55LV5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
