LG Electronicsメーカー50PC3DHの使用説明書/サービス説明書
ページ先へ移動 of 69
Please read this manual car efully before operating your set. Retain it for future r eference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you requir e service.
2 Warning W ARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
3 Safety Instructions W ARNING : T o reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
4 Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the appa- ratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over .
5 Contents Contents Contents Introduction Installation Operation 32 T urning on the TV 32 V olume Adjustment 32 Channel Selection 32 On Screen Menus Language Selection 33 On Screen Menus Selection and.
6 Contents Reference 44 Auto Clock Setup 44 Manual Clock Setup 45 On/Off T imer Setup 45 Sleep T imer 46 Auto Off 47 Aspect Ratio Control 48 Cinema 3:2 Mode Setup 48 Caption 49 Caption/T ext 50 Captio.
7 Introduction Accessories Accessories Introduction Introduction Owner ’ s Manual 75 Ω Round Cable Power Cord Ensure that the following accessories are included with your TV . If any accessory is missing, please contact the dealer where you purchased the product.
8 Introduction Controls Controls (Model Name: 32/37/42LC2D**) (Model Name: 32/37/42LC2D**) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV .
9 Introduction Connection Options (Model Name: 32/37/42LC2D**) Connection Options (Model Name: 32/37/42LC2D**) AC IN A V IN 2 A V IN 2 L/ L/ MONO MON O R AUDIO AUDIO S-VIDEO S-VIDEO VIDEO VIDEO AC I N.
10 Introduction Controls Controls (Model Name: 42PC1D**/42PC3D**/50PC3D**) (Model Name: 42PC1D**/42PC3D**/50PC3D**) - This is a simplified representation of front panel.
11 Introduction Connection Options Connection Options (Model Name: 42PC1D**/42PC3D**/50PC3D**) (Model Name: 42PC1D**/42PC3D**/50PC3D**) A V IN 2 A V IN 2 L/ L/ MONO MON O R AUDIO AUDIO S-VIDEO S-VIDEO.
12 Introduction Remote Control Key Functions Remote Control Key Functions POWER T urns your TV or any other programmed equipment on or off, depending on mode.
13 Introduction EZ PIC (Refer to p.38) Selects a factory preset picture mode depending on the view- ing environment. EZ SOUND (Refer to p.41) Selects the sound appropriate for the program's character . SAP (Refer to p.42) Selects MTS sound: Mono, Stereo, and SAP in analog mode.
14 Introduction VO L CH POWER 1 2 3 4 5 6 78 0 9 MENU MUTE FAV DA Y - GUIDE DA Y+ RA TIO VCR TV DV D ENTER APM ADJUST SAP EZ SOUND EZ PIC FREEZE FLASHBK PA G E PA G E EXIT TIMER CC INFO AU D IO CABLE STB MODE TV INPUT INPUT 1. When every external equipment is connected: 2.
15 Introduction VO L CH POWER 1 2 3 4 5 6 78 0 9 MENU MUTE FAV DA Y - GUIDE DA Y+ RA TIO VCR TV DV D ENTER APM ADJUST SAP EZ SOUND EZ PIC FREEZE FLASHBK PA G E PA G E EXIT TIMER CC INFO AU D IO CABLE STB MODE TV INPUT INPUT Brief Info. Brief Info. What is Brief Info? : Brief Info shows the present screen information.
16 Introduction VO L CH POWER 1 2 3 4 5 6 78 0 9 MENU MUTE FAV DA Y - GUIDE DA Y+ RA TIO VCR TV DV D ENTER FLASHBK PA G E PA G E EXIT TIMER CC INFO AU D IO CABLE STB MODE TV INPUT INPUT EPG (Electroni.
17 Installation Installation Installation Desktop Pedestal Installation 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches For proper ventilation, allow a clearance of 4" on each side and from the wall. GROUNDING Ensure that you connect the earth ground wire to prevent pos- sible electric shock.
18 Installation Connect the cables as necessary . After connecting the cables neat- ly , arrange the cables to the Cable Holder . T o connect an additional equip- ment, see the External equip- ment Connections section. Reinstall the CABLE MANAGE- MENT as shown.
19 Installation Place the set with the screen facing down on a cushion or soft cloth as shown. Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
20 Installation How to join the product assembly to the wall to protect the set tumbling - Set it up close to the wall so the product doesn ’ t fall over when it is pushed backwards.
21 Installation Antenna or Cable Connection Multi-family Dwellings/Apartments (Connect to wall antenna socket) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Outdoor Antenna W all Antenna Socket VHF Antenna UHF Antenna RF Coaxial Wire (75 ohm) T urn clockwise to tighten.
22 Installation - T o avoid picture noise (interference), leave an adequate distance between the VCR and TV . - T ypically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
23 Installation When connecting with an S-Video cable S-VIDEO OUT IN (R) AUDIO (L) VIDEO 34 OUTPUT SWITCH ANT OUT ANT IN VIDEO AUDIO ( ) VIDEO AUDIO COMPONENT IN S-VIDEO A V IN 1 A V OUT ANTENNA IN CA.
24 Installation DVD Setup When connecting with a S-Video cable S-VIDEO (R) AUDIO (L) VIDEO AUDIO ( ) VIDEO AUDIO COMPONENT IN S-VIDEO A V IN 1 A V OUT VIDEO VIDEO A UDIO UDIO MONO ( ) VIDEO VIDEO A UD.
25 Installation When connecting with a component cable 1 2 3 4 5 Connect the video outputs (Y , P B , P R ) of the DVD to the COMPONENT IN VIDEO jacks on the set. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. T urn on the DVD player , insert a DVD.
26 Installation When connecting with a D-sub 15 pin cable 1 2 3 4 Connect the RGB output of the digital set-top box to the RGB (PC/DTV) jack on the set. Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set. T urn on the digital set-top box.
27 Installation When connecting with a Component cable 1 2 3 4 Connect the video outputs (Y , P B , P R ) of the digi- tal set-top box to the COMPONENT IN VIDEO jacks on the set. Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set.
28 Installation Digital Audio Output 1 2 3 Connect one end of an optical cable to the TV Digital Audio Optical Output port. Connect the other end of the optical cable to the digital audio optical input on the audio equipment. See the external audio equipment instruction manual for operation.
29 Installation - This TV provides Plug and Play capability , meaning that the PC adjusts automatically to the TV's settings. PC Setup When connecting with a D-sub 15 pin cable 1 2 3 4 Connect the RGB output of the PC to the RGB (PC/DTV) jack on the set.
30 Installation 1. T o get the best picture quality , adjust the PC graphics card to 1024x768, 60Hz. 2. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. 3. When Source Devices connected with HDMI/DVI Input, output PC Resolution (VGA, SVGA, XGA), Position and Size may not fit to Screen.
31 Installation * Adjustment for screen Position, Size, and Phase * Initializing (Reset to original factory values) - T o initialize the adjusted values Close POSITION G G SIZE PHASE RESET Adjust D D .
Operation Operation Basic operation Basic operation 1. First, connect power cord correctly . At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT , CH D D / E E button on the TV or press the POWER , TV INPUT , INPUT , CH D D / E E , Number (0 ~ 9) button on the remote control .
33 Operation On Screen Menus Selection and On Screen Menus Selection and Adjustment Adjustment 1. Press the MENU button and then D D / E E button to select each menu. 2. Press the G G button and then use D D / E E / F F / G G button to display the available menus.
34 Operation EZ Scan (Channel Search) Setup Menu Options Setup Menu Options Press the MENU button and then use D D / E E button to select the SETUP menu. Press the G G button and then use D D / E E button to select EZ Scan . Press the ENTER button to begin the channel search.
35 Operation - There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after EZ Scan on the SETUP menu. - A Custom List can be created by toggling each channel on or off with the ENTER button.
36 Operation DTV Signal Strength - Shows how strong your DTV sig- nal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degrada- tion. - DTV Signals: Only when the input signal is DTV or CADTV , this function is available.
37 Operation - Sets a label to each input source or lets you skip the input source which is not in use when you press INPUT button. Input Label Press the MENU button and then use D D / E E button to select the SETUP menu. Press the G G button and then use D D / E E button to select Input Label .
38 Operation APM (Adaptive Picture Mode) - It allows a viewer to select their preferred mode after comparing picture (Daylight, Normal, Night Time and Custom) settings. - Note: While operating the 4-split, any button except APM , ENTER , EXIT , D D / E E / F F / G G , VOLUME D D / E E , MUTE button o n the remote control are not available.
39 Operation Color T emperature Control Previous MENU EZ Picture Contrast Brightness Color Sharpness Tint Color T emperature G Video Reset Cool Medium Warm Previous MENU EZ Picture Contrast Brightness Color Sharpness Tint Color T emperature Video Reset G Selection ( G or ) resets to the factory settings (default).
40 Operation Audio Menu Options Audio Menu Options - Other languages may be available if a digital signal is provided by the broadcasting station. - Scans for changes in sound level during commercials, then adjusts the sound to match the specified audio level.
41 Operation EZ Sound Manual Sound Control ( EZ Sound-Custom option) - EZ Sound lets you enjoy the best sound without any special adjust- ment because the TV sets the appropriate sound options based on the program content. - When adjusting sound options (treble, bass, and front surround) manually , EZ Sound automatical- ly switches Custom .
42 Operation Audio Menu Options continued Audio Menu Options continued - is a trademark of SRS Labs, Inc. - T ruSurround XT technology is incorporated under license from SRS Labs, Inc. - Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade- marks of Dolby Laboratories.
43 Operation - BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism. TV Speakers On/Off Setup - T urn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off.
44 Operation T T ime Menu Options ime Menu Options - If current time setting is wrong, reset the clock manually . Auto Clock Setup Manual Clock Setup Press the MENU button and then use D D / E E button to select the TIME menu. Press the G G button and then use D D / E E button to select Auto Clock .
45 Operation On/Off Timer Setup Sleep Timer - Timer function operates only if current time has been set. - Off-Timer function overrides On- Timer function if they are set both set to the same time. - The TV must be in standby mode for the On-Timer to work.
46 Operation T T ime Menu Options continued ime Menu Options continued Auto Off - If the TV is on and there is no input signal, the TV turns off automatically after 10 minutes. Press the MENU button and then use D D / E E button to select the TIME menu.
47 Operation Aspect Ratio Control Option Menu Features Option Menu Features - Lets you choose the way an ana- log picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV , you need to specify how the picture is to be displayed.
48 Operation Caption Press the MENU button and then use D D / E E button to select the OPTION menu. Press the G G button and then use D D / E E button to select Caption. Press the G G button and then use D D / E E button to select Off or On . Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
49 Operation - Select a caption mode for dis- playing captioning information if provided on a program. - Analog caption displays informa- tion at any position on the screen. - T ext displays information, usually at the bottom position and is used for a data service.
50 Operation - Customize the DTV/CADTV cap- tions that appear on your screen. Caption Option Press the MENU button and then use D D / E E button to select the OPTION menu. Press the G G button and then use D D / E E button to select Caption Option . Press the G G button and then use F F / G G button to select Custom .
51 Operation - A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image ; even though the image is changed.
52 Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcast- ing station.
53 Operation - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu if the Lock System is turned on.
54 Reference No. Pin Name 1 No connection 2 RXD (Receive data) 3 TXD (T ransmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection 1 .
55 Reference Set ID Set ID - Use this function to specify a TV ID number . - Refer to ‘ Real Data Mapping ’ . See page 56. • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code * Use a crossed (reverse) cable.
56 Reference 02. Input Select (Command2:b) (Main Picture Input) G T o select input source for the TV . T ransmission Data 0: DTV 1: Analog 2: A V1 3: A V2 4: Component 1 5: Component 2 6: RGB-DTV 7: R.
57 Reference 09. Color (Command2:i) G T o adjust the screen color . Y ou can also adjust color in the Video menu. T ransmission Data Min : 0 ~ Max : 64 • Refer to ‘ Real data mapping ’ . See page 56. [k][i][ ][Set ID][ ][Data][Cr] Acknowledgement [i][ ][Set ID][ ][OK][Data][x] 10.
58 Reference 22. T une Command (Command: m a) G T o tune channel to following physical/major/minor number T ransmission Data 0: Physical Channel Number(T ransmit by Hexadecimal code) NTSC air:02~45 NT.
59 Reference 25. Input select(Command: x b) (Main Picture Input) G T o select input source for TV . T ransmission [x][b][][Set ID][][Data][Cr] 23. Channel Add/Del (Command: m b) G T o add and delete t.
60 Reference G Connect your wired remote control to the Remote Control port on the TV . G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code.
61 Reference 0B 0F 08 C4 C5 79 0E 10 ~ 19 4C 1A 09 02 03 00 01 1E AA 39 40 41 07 06 44 43 A9 52 4D 5B 65 0A CB D6 5A D0 BF D4 D5 D7 C6 76 77 AF R/C Button R/C Button R/C Button (Power On/Off) Discrete.
62 Reference G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers.
63 Reference Programming Codes Programming Codes AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CR.
64 Reference APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 P ANASONIC 003 009 PHILIPS 013 PIONE.
65 Reference T T roubleshooting Checklist roubleshooting Checklist The video function does not work. No picture & No sound No or poor color or poor picture • Adjust Color in menu option. • Keep a sufficient distance between the product and the VCR.
66 Reference The audio function does not work. Picture OK & No sound • Press the VOL or VOLUME button. • Sound muted? Press MUTE button. • T ry another channel.
67 Reference Product Specifications Product Specifications • The specifications shown above may be changed without prior notice for quality improvement.
68 Reference 42PC1DVH (42PC1DVH-UD) AC100-240V ~ 50/60Hz NTSC-M, A TSC, 64 & 256 QAM VHF 2 ~ 13, UHF 14 ~ 69, CA TV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69 75 Ω 32 ~ 104 ° F (0 ~ 40 ° C) Less than 80% -4 ~ 140 ° F (-20 ~ 60 ° C) Less than 85% 44.
Lire attentivement ce manuel avant de fair e fonctionner votre appar eil. Le conserver à des fins de références. Noter les numéros de modèle et de série de l’appar eil. V oir l’étiquette au dos du moniteur et donner cette information au marchand si un service est r equis.
デバイスLG Electronics 50PC3DHの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
LG Electronics 50PC3DHをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG Electronics 50PC3DHの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG Electronics 50PC3DHの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG Electronics 50PC3DHで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG Electronics 50PC3DHを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG Electronics 50PC3DHの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG Electronics 50PC3DHに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG Electronics 50PC3DHデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
