LG ElectronicsメーカーHX301Gの使用説明書/サービス説明書
ページ先へ移動 of 44
O WNER’S MANU AL DLP PR OJE CT OR HX300G HX301G Please r ead this manual caref ully bef ore operating your se t and retain it for future r efer ence.
DLP PROJE CT OR DLP PROJE CT OR W arning This is a class B product . In a domestic environment this product may cause radio interference, in which c ase the user may be required to take adequate measures. This projector complies with EMC Directive and R&TTE Directive.
Contents 3 Cont ents Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96 /E C.
Safe ty Instructions 4 Saf ety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector . ꔈ Safety Instructions are given in t wo forms as detailed below. W ARNING : The violation of this instruction may cause serious injuries and even death.
Safe ty Instructions 5 Using W ARNING If water is spilt into the projector unplug it from the power supply immediately and consult your Ser vice Agent . This may cause an electric shock hazard or damage to the unit! Dispose of used batteries carefully and safely .
Safe ty Instructions 6 Using NO TES Do not place heavy objects on top of projector . This may cause mechanical failure or personal injur y! T ake care not to impact the lens particularly when moving the projector . Do not touch the lens of the pro- jector .
Speaker Names of parts 7 Names of parts Main Body * The projector is manufactured using high-precision technology . Y ou may , however , see on the Projector screen tiny black points and/ or bright points (red, blue, or green). This can be a normal result of the manufacturing proces s and does not always indicate a malfunction.
Names of parts 8 Connecting Par t USB Headphone por t IR (Remote control sensor) * Do not block the IR port for normal operation of remote control. * When using HDMI/USB connector , if the size of the jack connecting to the connector is too big, they may not be connected.
Names of parts 9 R emot e Control Installing Batteries INPUT Button KEYST ONE ꔌ , ꔍ Button MENU Button USB control Buttons A UT O Button VOL UME ∧ / ∨ Button RA TIO Button CA UTION RISK OF E XPL OSION IF BA TTERY IS REPLACED WITH AN INCORRE CT TYPE .
Names of parts 10 C ei l i ng m ou n t f o r p ro j e ct o r Acce ssorie s Optional Extras * Contact your dealer to purchase these items. * Optional par ts can be changed without notice to improve the qualit y of the product , and new optional par ts can be added.
Installing and Composition 11 Installing and Composition Provide proper ventilation for this projector . Place this projector in adequate temperature and humidity conditions. • Install this projector only in a location where adequate temperature and humidit y is available.
Installing and Composition 12 1. Place the projecto r on a sturd y and horizon tal sur face with the PC or A V source. 2. Place the projecto r with the desir ed distance fro m the screen. T he distance between the project or and the scre en determine s the actual size of the image.
Installing and Composition 13 • This projector has a Kensingt on Securit y System Connector on the side panel. Connect the Kensingt on Securit y System cable as below. • F or the detailed installation and use of the Kensingt on Securit y System, refer to the user ’s guide included with the Kensingt on Securit y System set .
Installing and Composition 14 Selecting input mode 1. Pre ss the INPUT button on the remo te contr ol. 2. Selecting an input signal with the INPUT butto n will only change the project or only to connect ed inputs. Y ou can change it to any inputs with the ＜ , ＞ button.
Connection 15 Connection Connecting to a Desktop PC * Y ou can connect the projector to a computer with VGA, SVGA, XGA, SXGA output. * Refer to page 41 for resolutions the projector supports. < How to connect > 1. Connect the RGB IN of the project or and the comput- er output port with a computer cable.
Connection 16 Connecting to a DVD Player < How to connect a Component source > 1. After connecti ng the Component cable of DVD Player to the RGB to Component cable, connect it to the RGB IN termina l of the proj ector . * When connecting the component cable, match the jack colors with the component cable.
F unction 17 PICTURE Menu Options 1. Pre ss the MENU button. Th en, move to PICTURE with the ∧ , ∨ , ＜ , ＞ butto ns and pres s the ◉ OK button. 2. Pre ss the ∧ , ∨ buttons to move to a desir ed function and pre ss the ◉ OK button. 3. Pre ss the ＜ , ＞ buttons to make a desir ed adjustment and then pres s the ◉ OK button.
F unction 18 1. Pre ss the MENU button. Th en, move to PICTURE with the ∧ , ∨ , ＜ , ＞ buttons and pre ss the ◉ OK button. 2. Pre ss the ∧ , ∨ buttons to move to Advanced Control and pres s the ◉ OK button . 3. Move to a desir ed item with the ∧ , ∨ button s.
F unction 19 1. Pre ss the MENU button. Th en, move to PICTURE with the ∧ , ∨ , ＜ , ＞ buttons and pre ss the ◉ OK button. 2. Pre ss the ∧ , ∨ buttons to move to Picture Reset and pres s the ◉ OK button. 3. Pre ss the ＜ , ＞ buttons to move to Y es and press the ◉ OK butto n.
F unction 20 SCREEN Menu Options • Select Rear when projecting from the back of the transparent screen purchased separately . • Select Ceiling when installing the product on the ceiling. • When P JT Mode is Rear / Ceiling , the left/ right of the speaker changes automatically .
F unction 21 RGB Config. F unction 1. Pre ss the STILL button on the remo te contr ol. * Y ou can freez e the moving image. 2. T o exit STILL, pres s any button. * The STILL function will release automatically after approximat ely 10 minutes. Using the Still F unction < Moving Image > < Still Image > RGB Config.
F unction 22 A UDIO Menu Options FM Wirele ss Audio is a function to send out audio signals from the projector using FM frequency (88.5 MHz ~ 95.5 MHz). The frequency of Project or and FM receiver should be same in order to output the sound from FM receiver normally .
F unction 23 • If used in a medical institution, it may cause an error for medical equipments. Please do not use in a medical establishment . • Please maintain the distance bet ween the projector and FM receiver within 3 m. • The sound from FM receiver may not come out in the desired qualit y if the distance is more than 3 m.
F unction 2 4 T o listen through the FM receiver speaker (HX300G only) Adjusting V olume F unction Audio Pre ss the VOL UME ∧ , ∨ button on the remote control. • If FM Wireless Audio is On , it does not function. Adjust with FM receiver . • Y ou can use this function through the MENU button.
F unction 25 Adjusting Speaker Balance Adjusting T reble A UDIO FM Wir eless Audio : Off • F requency 88.5 MHz V olume 50 Balance 0 T reble 0 L R A UDIO FM Wir eless Audio : Off • F requency 88.5 MHz V olume 50 Balance 0 T reble 0 L R 1. Pre ss the MENU button.
F unction 26 * The sleep timer turns the projector off at the preset time. 1. Pre ss the Q.ME NU button on the remo te contr ol. 2. Pre ss the ＜ , ＞ butt ons to move to Sleep Timer . 3. Pr es s the ∧ , ∨ buttons to select a desired pre set time.
F unction 27 OPTION Menu Options 1. Pre ss the MENU button. Th en, move to OPTION with the ∧ , ∨ , ＜ , ＞ butto ns and pres s the ◉ OK button. 2. Pre ss the ∧ , ∨ buttons to move to Menu Language and pre ss the ◉ OK button. 3. Move to a desir ed item with the ∧ , ∨ , ＜ , ＞ buttons and then pres s the ◉ OK button .
F unction 28 1. Pre ss the MENU button. Th en, move to OPTION with the ∧ , ∨ , ＜ , ＞ butt ons and pre ss the ◉ OK button. 2. Pre ss the ∧ , ∨ buttons to move to Auto Power and pre ss the ◉ OK button. 3. Pre ss the ∧ , ∨ buttons to move to On and pre ss the ◉ OK button.
F unction 29 INF ORMA TION Menu Options 1. Pre ss the MENU button. Th en, move to INF ORMA TION with the ∧ , ∨ , ＜ , ＞ buttons and pre ss the ◉ OK button. 2. Y ou can see the curr ent informa tion of the project or . • Pre ss the BACK button to exit the menu screen.
USB 30 * When you connect a USB device, this screen is displayed, automatically . In USB device, you can not add a new folder or delete the existing folder . USB T o use the USB device * Image shown may differ from your projector . Connecting the USB device 1.
USB 31 Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programmed may not be recogniz ed.
USB 32 ꔂ Navigation ꔉ PopUp Menu ꘧ Page Change ꘁ Ma rk ꕉ Exit PHO T O LIST * It is available to playback the photo file(* .jpg) in the USB device. The On Screen Display may be different from your set . Images are an example to assist with the projector operation.
USB 33 F ull Screen Menu 1. Pre ss the USB button. The n, move to PHO TO LIST with the ＜ , ＞ buttons and press the ◉ OK button. 2. Pre ss the ∧ , ∨ , ＜ , ＞ buttons to move to desir ed photo and pre ss the ◉ OK button. 3. Pre ss the ∧ , ∨ buttons to move to View and press the ◉ OK butto n.
USB 34 ꔂ Navigation ꔉ PopUp Menu ꘧ Page Change ꘁ Mark ꕉ Exit MUSIC LIST * Y ou can use the Music List menu to play MP3 files form a USB storage device. The On Screen Display on your model may be slightly different . 1. Move s to upper level file 2.
USB 35 MO VIE LIST * The movie list is activat ed once USB is det ecte d. It is used when playing movie files on projec tor . Supported Movie File Extension name Video Codec Audio Codec M ax R e s ol ut i o n mpg, mpeg, vob MPEG1, MPEG2 Dolby Digital,MPEG,MP3,LPCM 1920x1080 @30p dat MPEG1 Dolby Digital,MPEG,MP3,LPCM ts, trp,tp MPEG2, H.
USB 36 Precautions when playing the DivX ► A DivX movie file and its subtitle file must be located in the same folder . ► At this time, a movie file name and its subtitle file name must be identical for it to be displayed. ► Specific subtitles creat ed by the user may not be operated normally .
USB 3 7 1. Move s to upper level f older 2. Pr eview: Display the title/f older name of the movie in the select ed f older 3. Curr ent page/T otal pages 4.
USB 38 Option Menu Selection Playing the Movie 1. Pre ss the USB button. The n, move to MOVI E LIST with the ＜ , ＞ buttons and pres s the ◉ OK button. 2. Pre ss the ∧ , ∨ , ＜ , ＞ move to a desired movie file and pre ss the ◉ OK button.
USB 39 T o See The DivX Registra tion Code 1. Pre ss the MENU button. Th en, move to USB with the ∧ , ∨ , ＜ , ＞ butto ns and pres s the ◉ OK button . 2. Pre ss the ∧ , ∨ buttons to move to DivX Reg. Code and press the ◉ OK button. 3. Y ou can see the DivX registra tion code of the projecto r .
USB 40 FILE VIE WER Screen Components 1. Move s to upper level file 2. Pr eview: Display the title/f older name of the file in the selected f older 3. Curr ent page/T otal pages 4. Co rre sponding butto ns on the remo te contr ol Page 1/1 FILE VIEWER Drive 1 Requiem 2 story.
Informa tion 41 Supported Monitor Display * The following table lists the display forma ts suppor ted by the projector . * If the projector does not support the input signal, “ Invalid F ormat ” message appears on the screen. * The projector supports DDC1/2B t ype as Plug & Play function.
Informa tion 42 MODEL HX300G (HX300G-JE ) / HX301G (HX301G-JE) R esolution 102 4 (Horizontal) x 7 68 (V er tical) pixel Horizontal / V ertic al Ratio 4:3 (horizontal:v ertical) Panel size (mm) 13. 97 Projection distance (Screen size) 0 .55 m ~ 2. 75 m (50.
Informa tion 43 Open Source Soft ware Notice The f ollowing GPL executables and L GPL, MPL librarie s used in this product are subject to the GPL2. 0/L GPL2.
The model and serial number of the project or is located on the back or one side of the pr ojector . R ecord it belo w should y ou ever need ser vice. MODEL SERIAL.
デバイスLG Electronics HX301Gの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
LG Electronics HX301Gをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLG Electronics HX301Gの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。LG Electronics HX301Gの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。LG Electronics HX301Gで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
LG Electronics HX301Gを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLG Electronics HX301Gの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、LG Electronics HX301Gに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLG Electronics HX301Gデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
