Appleメーカー7の使用説明書/サービス説明書
ページ先へ移動 of 178
F inal C ut P r o 7 Exploring F inal Cut P ro.
Apple Inc. 2009 Apple Inc. All rights reserved. Copyright © Y our rights to the software are governed by the accompanying software license agreement. The owner or authorized user of a valid copy of F inal Cut Studio software may reproduce this publication for the purpose of learning to use such software.
C ont ents 3 7 Chapter 1: A First Look at F inal Cut P ro 8 Opening Final C ut Pro 10 Jump In: Explore the Browser 14 Jump In: Explore the V iewer 19 Jump In: Explore the Can vas 24 Jump In: Explore t.
4 Conten ts 55 Chapter 3: Preparing Clips in the V iewer 55 Jump In: Get to Know the Viewer 61 Jump In: Change Clips in the V iewer 62 Jump In: Create a Title Clip 68 Jump In: Change Clips over Time 7.
Conten ts 5 141 Chapter 7: Creating V oiceov ers 141 Jump In: Add V oiceover Clips 1 50 Key C oncepts 151 Chapt er 8: Adding Video Filters and Tr ansitions 15 2 Jump In: Apply Filters to Clips 15 7 Ju.
.
1 7 A F irst Look at F inal Cut P ro W elcome to Final C ut Pro . If y ou’ re new to the F inal Cut Pro video editing workow , this guide is for y ou. Here you ’ll create a sample video project and learn by doing. Each chapter of this book presents major f eatures and guides you in trying things out.
8 Chapter 1 A First L ook at Final Cut Pro Opening F inal Cut P ro Y ou’ll start by opening Final C ut Pro and cr eating a sample project. T o op en F inal Cut Pro: Double-click the Final Cut P ro icon in your Applications folder . 1 If you see the Choose Settings dialog, click OK to accept the default settings.
Chapter 1 A First L ook at Final Cut Pro 9 Click Continue . 3 When Final C ut Pro opens, your screen will look similar to this: Browser Viewer Canvas Timeline On the left you see the Browser , where y ou create projects and organize bins tha t hold your clips.
10 Chapter 1 A First L ook at Final Cut Pro Explore the Bro wser Jump In: First, you’ll import some clips into your project, and then you’ll explore some important parts of the Final Cut Pr o interface. If you have video les of your own on your computer , feel free t o import several and work with them as you explore.
Chapter 1 A First L ook at Final Cut Pro 11 T o imp ort your own video les that ar e already on your computer: Choose File > Import > Files . 1 Navigate to the f older holding your video les. 2 Sel ect the les y ou w ant to im port in to F inal Cut Pr o .
12 Chapter 1 A First L ook at Final Cut Pro T r y This F eel free to try out any of the following to see what happens . Change the Browser dis play: Choose V iew > Browser Items > as Large Icons t o display the clips as icons . Choose V iew > Browser Items > as Small Icons t o display the clips as smaller ic ons.
Chapter 1 A First L ook at Final Cut Pro 13 Create a new sequence: Choose File > New > Sequence . 1 A new sequence icon appears in the project. A sequence represents clips in the Timeline. A sequence might hold a scene, a por tion of your movie , or the entire mo vie.
14 Chapter 1 A First L ook at Final Cut Pro Explore the Viewer Jump In: Y ou use the Viewer to view and edit individual clips, set In and Out points, set markers, and more.
Chapter 1 A First L ook at Final Cut Pro 15 Play a clip in the Viewer: Click the Play button to start and stop playing the video clip . Then press the Space bar to start and stop playing the video clip. Play button Scrubber bar Press J t o play the clip back ward .
16 Chapter 1 A First L ook at Final Cut Pro Navigate t o specic locations in a clip: Click in the white scrubber bar to reposition the playhead . The scrubber bar represents the length of the clip. Press the Home key or the End key to mov e the playhead to the beginning or end of the clip.
Chapter 1 A First L ook at Final Cut Pro 17 Set and work with In and Out points: P osition the playhead near the beginning of the clip and choose Mar k > Mark In to set an In point. Position the playhead near the end of the clip and choose Mark > Mark Out to set an Out point.
18 Chapter 1 A First L ook at Final Cut Pro Navigate betw een edit points: Click the Go to Next Edit button or the Go to Pr evious Edit button to mov e the playhead to the next or previous edit point. Go to Previous Edit butt on Go to Next Edit button Press the U p Arrow and Down Arrow keys to mov e b etween edit points .
Chapter 1 A First L ook at Final Cut Pro 19 Explore the Can vas Jump In: The Canv as is where you play back the movie that you ’ve created in the Timeline.
20 Chapter 1 A First L ook at Final Cut Pro T r y This Use the Can vas to place a clip in the Timeline: Drag the clip from the V iewer (just drag the image) int o the Canv as until the colored Edit Overlay appears. Drag the clip to the Insert sec tion of the overlay .
Chapter 1 A First L ook at Final Cut Pro 21 Change the display of the C anv as: Choose several di erent zoom levels from the Zoom pop-up menu. Last, choose the 50% zoom level from the Z o om pop-up menu. Zoom pop-up menu Play and na vigate within the clip in your sequence: Click the Canv as window to make it ac tive.
22 Chapter 1 A First L ook at Final Cut Pro Press the Spac e bar to start and stop playback. Click in the white scrubber bar in the Can vas to reposition the pla yhead.
Chapter 1 A First L ook at Final Cut Pro 23 Reposition the playhead in the Can vas (if your mouse has a tr ack ball): P osition the pointer over the Canv as and roll the track ball left or right to reposition the playhead in the Can vas and Timeline.
24 Chapter 1 A First L ook at Final Cut Pro Explore the Timeline Jump In: The Timeline holds your sequences, which contain the arrangement of video and audio clips, and other items such as titles and transitions, in the order you want them in your movie.
Chapter 1 A First L ook at Final Cut Pro 25 Drag the thumb tabs at the ends of the Zoom slider to change the dis played length of the T imeline ’ s clips. Scroll thr ough the Timeline by dragging the Zoom slider left or right. Press C ommand–Equal Sign (=) and Command-Hyphen (-) to zoom in to and out of the Timeline .
26 Chapter 1 A First L ook at Final Cut Pro P osition the pointer over the end of the clip and drag to shorten or lengthen the clip. Y ou can trim either end of a clip this way . Click the Razor Blade tool in the T ool palette. P osition the pointer over the clip , then click to split the clip .
Chapter 1 A First L ook at Final Cut Pro 27 Change the Timeline track size: Change the size of tracks by clicking the Track Height c ontrol. T rack Height control Add more clips to the Timeline us.
28 Chapter 1 A First L ook at Final Cut Pro W ork with the M ain Windows Jump In: Final C ut Pro pr ovides some easy methods for w orking with its main windows. T r y This Change the active window: Press C ommand-1 to activate the Viewer . Press C ommand-2 to activate the Canvas .
Chapter 1 A First L ook at Final Cut Pro 29 Learning About P rojec ts, Sequences, Clips, and Media Files T o begin creating a movie, you create a project in the Browser . T o create a new project, choose File > New P rojec t. Y ou can have multiple projects open at once , each represen ted by a tab in the Browser .
30 Chapter 1 A First L ook at Final Cut Pro Understanding the Relationship Between Clips and Media F iles An important rst stage in creating a project is transferring your video to your computer . Final Cut Pro pr ovides a variety of ways t o get media into your comput er .
Chapter 1 A First L ook at Final Cut Pro 31 If you transfer a F inal Cut Pro project le to another computer f or editing, you must also transfer all the media les to the other syst em as well. It’ s impor tant to maintain the connection between your media les on disk and the clips in your project.
32 Chapter 1 A First L ook at Final Cut Pro Viewer: A window in Final C ut Pro in which y ou can work with a clip to set In and Out points, play back the clip, and mak e many other types of changes such as applying lters and adjusting motion parameters.
2 33 Bringing Media in to Y our S ystem F ina l C ut P ro pr ov ide s a va rie ty o f m et hod s f or bri ng ing yo ur video and other media into y our F inal Cut P ro system for editing .
34 Chapter 2 Bringing Media into Y our System Explore T ape-Based Video Capture Jump In: Y ou use the Log and Capture windo w to preview and capture the footage on y our tape. Y ou can play the footage on tape from y our camera or deck using the transport controls.
Chapter 2 Bringing Media into Y our System 35 Create a new project to hold your video: Choose File > New P rojec t. For now the name of the pr oject is “Untitled,” and a new project tab appears in the Browser . Later , when you sa ve the project, you can give it any name you like.
36 Chapter 2 Bringing Media into Y our System T r y This Select a logging bin: Choose File > New > Bin to cr eate a new bin to hold clips. Rename the bin, if you wish. Select the bin and choose File > Set Logging Bin. Open the Log and Capture window: Choose File > L og and Capture.
Chapter 2 Bringing Media into Y our System 37 Set rough In and Out points for a clip that y ou want to capture: Use the transport controls to go to the beginning of a section of tape that you wan t to capture. Click the Mark In button to set an In point to roughly mark the beginning of the clip.
38 Chapter 2 Bringing Media into Y our System Capture a single clip: After setting In and Out points and entering logging information, click the Capture Clip button. Capture Clip button Final C ut Pro r ewinds the tape and captures the footage as a media le on your har d disk.
Chapter 2 Bringing Media into Y our System 39 Batch capture multiple clips at once: Capture oine clips by clicking the Capture Batch button. When the Batch Capture m dialog appears, choose All I tems in L o gging Bin from the Captur e pop-up menu, then click OK.
40 Chapter 2 Bringing Media into Y our System Explore F ile-B ased Video T ransfer Jump In: Y ou use the Log and Tr ansfer window to pr eview le-based media mounted on your computer or another device. Y ou can preview the footage using the transport controls.
Chapter 2 Bringing Media into Y our System 41 Getting Ready Create a new project to hold your video: Choose File > New P rojec t. For now the name of the pr oject is “Untitled,” and a new project tab appears in the Browser . Later , when you sa ve the project, you can give it any name you like.
42 Chapter 2 Bringing Media into Y our System Choose a scratch disk to hold the media y ou’ re transferring to the pr oject: Choose Final C ut Pro > S ystem Settings. 1 In the System Settings window , click Set in the Scratch Disks tab . 2 Sele ct th e hard disk loca tion w her e you wa nt the me dia le s sto red .
Chapter 2 Bringing Media into Y our System 43 T r y This Select a logging bin: Choose File > New > Bin to cr eate a new bin to hold clips. Rename the bin, if you wish. Select the bin and choose File > Set Logging Bin. Open the Log and Tr ansfer window : Choose File > L og and T ransfer .
44 Chapter 2 Bringing Media into Y our System Locate les on moun ted volumes: In the Browse area, click a le to select it for logging and transferring. Click a column heading in the Browse ar ea to sort the les by that column category , in ascending or descending order .
Chapter 2 Bringing Media into Y our System 45 Set rough In and Out points for a clip: Use the transport controls to go to the beginning of a section of a media that you wan t to transfer . Click the Mark In button to set an In point t o roughly mark the beginning of the clip.
46 Chapter 2 Bringing Media into Y our System Enter scene , shot/take, and angle information in the Scene, Shot/T ake, and Angle elds if you wish. Enter a note about the clip con tents in the Log Not e eld, if you wish. If the clip is one worthy of inclusion in your movie , selec t the Good checkbox.
Chapter 2 Bringing Media into Y our System 47 Log additional clips without immediately tr ansferring them: Select a clip in the Log and Transfer windo w’ s Browse area, then set In and Out points 1 and enter the logging information f or the clip.
48 Chapter 2 Bringing Media into Y our System Impor t Still Images and Other Media Jump In: Y ou can import still images and graphics les into your projects and place them in your sequence in the Timeline.
Chapter 2 Bringing Media into Y our System 49 T r y This Import still images into a project: Choose File > Import > Files . Selec t the still-image les you wan t to import and click Choose. T he still images appear as clips in the Browser .
50 Chapter 2 Bringing Media into Y our System Import audio les into a project: Choose File > Import > Files . Select the audio les you wan t to impor t and click Choose. The audio les appear as clips repr esented by a s peak er icon in the Bro wser .
Chapter 2 Bringing Media into Y our System 51 Learning About Ingesting Media and Setting Up P rojec ts When you capture or transf er footage from a camcor der , the media le s are stored on your scratch disk, a disk location that you tell F inal Cut Pro to use.
52 Chapter 2 Bringing Media into Y our System Choo sing a n E asy Set up tha t m at che s the m ajority of y our v ideo foot age he lps you avoid having t o render most of your footage.
Chapter 2 Bringing Media into Y our System 53 Key Conc epts Logging: Logging footage allow s you to recor d information about a clip that will help you identify it later .
54 Chapter 2 Bringing Media into Y our System Capture Now: Â The Capture Now process begins the aut omatic capture of your tape-ba sed f ootage at an y point o n a tap e and cont inues captu ring un til the end of the tap e or u ntil you stop t he cap ture by pr essing the Esc (Es cape) key .
3 55 Pr eparing Clips in the V iew er The Viewer provides ecient w ays t o review and edit individual clips in your projects. In this chapter , you’ll explore more of the featur es of the V iewer . Get to Know the V iewer Jump In: Y ou work with individual clips in the V iewer .
56 Chapter 3 Preparing Clips in the Viewer Getting Ready In the Browser , click the tab of the project that holds your sample clips . Drag a clip from 1 the Browser int o the V iewer .
Chapter 3 Preparing Clips in the Viewer 57 T r y This Reposition the Viewer: Drag the V iewer title bar to mov e the V iewer to a new screen location. Change the size of the Viewer: Drag the resize con trol in the lower-right corner of the Viewer to change the Viewer size .
58 Chapter 3 Preparing Clips in the Viewer Show the timecode ov erlays: Choose Show Timecode O verlay s from the V iew pop-up menu. Change the In and Out points to see how the timecode ov er lays change . T urn o the display of ov erlays: Choose Show Overlays from the View pop-up menu again to turn o the dis play of overlays .
Chapter 3 Preparing Clips in the Viewer 59 Set the playhead at an exact frame in a clip by en tering a timecode value: In the Current Timecode eld, enter a timecode value that mat ches a point in your clip. Enter a timecode value in the f ormat 00:00:00:00 (hours: minutes: seconds: frames).
60 Chapter 3 Preparing Clips in the Viewer Add markers to indicat e specic times in a clip: In the Viewer , plac e the playhead where you w ant to add a marker and click the Add Marker button. Set sev eral markers to mark specic times in a clip .
Chapter 3 Preparing Clips in the Viewer 61 Change Clips in the Vie wer Jump In: After opening a clip in the V iewer , you can reposition the clip on the screen and enlarge it, shrink it, or r otate it to displa y it at a dier ent angle. T o make such changes, you display the clip in a wir eframe view .
62 Chapter 3 Preparing Clips in the Viewer Reposition the clip on the screen: P osition the pointer on the image in the Viewer and drag left or right to reposition the image.
Chapter 3 Preparing Clips in the Viewer 63 T r y This Create a title clip in the Viewer: Choose T ex t > T ex t from the Generator pop-up menu. Generator pop-up menu Sample text appears in the Viewer . Y ou can now change the text using the titling controls .
64 Chapter 3 Preparing Clips in the Viewer Choose a text color by double-clicking the Font C olor color picker. Select a color from the color wheel and then click OK.
Chapter 3 Preparing Clips in the Viewer 65 Reposition a title on the screen: Double-click the title clip in the Timeline to open it in the V iewer . 1 In the Viewer , dr ag the title text to a di erent position. Experiment with repositioning 2 the text on the screen.
66 Chapter 3 Preparing Clips in the Viewer Superimpose a title over another clip: Drag the title clip at the beginning of the movie above Sample Clip 1 in the T imeline. 1 P osition the playhead over the gap at the beginning of the movie and choose 2 Sequence > Close Gap.
Chapter 3 Preparing Clips in the Viewer 67 Arrange a title and clip to appear side by side: Place the playhead in the title clip in the Timeline. 1 In the T imeline , double-click Sample Clip 1, the background clip , to open it in the Viewer .
68 Chapter 3 Preparing Clips in the Viewer Change Clips over Time Jump In: The changes that you ’ve made to clips and titles can also be made to happen over time as the movie plays. For example, a clip might move across the screen, or a title might appear and then disappear .
Chapter 3 Preparing Clips in the Viewer 69 Click the Add Motion Keyframe button. In this case, the keyframe marks where the clips 2 will begin to change size. Add Motion Keyframe button Note that the wireframe and handles of the clip in the Viewer turn green to identify the new keyframe.
70 Chapter 3 Preparing Clips in the Viewer Move the playhead ahead in the Viewer to the frame where you want the change 3 to end. In this case, place the playhead at the approximat e p osition you see in the illustration below . This will be the frame at which the clip is completely re sized .
Chapter 3 Preparing Clips in the Viewer 71 Navigate betw een keyframes in the Viewer: With the Viewer active, press Shift-K and Option-K to move the playhead from one keyframe to another . Y ou can use these keyboard shor tcuts to quickly nd and move between keyframes.
72 Chapter 3 Preparing Clips in the Viewer Press C ontrol-K to set another keyframe. Drag the title clip o the screen background. 5 Drag the title clip off the screen. Press the U p Arrow key to move the pla yhead to the beginning of the clip , and then 6 play the clip to see the text move o ver time.
Chapter 3 Preparing Clips in the Viewer 73 Rotate a clip ov er time: With th e titl e clip still open in the Viewer a nd the V iew er activ e, press Shi ft-K or Option -K 1 as necessary to move the playhead to the last keyframe , where the text stops moving .
74 Chapter 3 Preparing Clips in the Viewer Change a clip ’ s opacity over time: With the title clip still open in the Viewer , click the Motion tab to dis play the motion 1 controls. D rag the corner of the Viewer to expand it, as shown below . The options you see are all parameters that you can set t o change the display of the clip .
Chapter 3 Preparing Clips in the Viewer 75 Click the Motion tab again. B eside each paramet er appears a keyframe graph area that 3 represents the dura tion of the clip. Y ou can add keyframes to this keyframe graph area to change specic parameter settings o ver time.
76 Chapter 3 Preparing Clips in the Viewer Click the Motion tab and click in the keyframe graph area to position the playhead near 7 the end of the clip, then click the keyframe button to set another keyframe. Add a keyframe here. Press the Down A rrow key to move the pla yhead to the end of the clip , and set another 8 keyframe.
Chapter 3 Preparing Clips in the Viewer 77 Learning About Motion P arameters Y ou’v e had a brief introduction to some of the changes you can make using the V iewer , but many more are possible using the Motion tab .
78 Chapter 3 Preparing Clips in the Viewer Y ou can add keyframes in the keyframe graph area by clicking the keyframe button for a parameter . Keyframe button Keyframe navigation buttons If the playhead is currently on a keyframe, clicking the button removes the keyframe.
Chapter 3 Preparing Clips in the Viewer 79 Key Conc epts Image mode: A Viewer display mode that shows the video c ontent of a clip as it pla ys back. Y ou can change the display to show the clip at reduc ed or expanded sizes as you work with the clip .
.
4 81 W ork ing with the Can vas and Timeline Y ou use the Can vas and Timeline to build your project ’ s sequences , adding , removing, rearranging, and trimming clips as you like. Next, you ’ll use the Canv as to learn its basic video editing func tions, and then you’ll explore working with clips in a sequence in the Timeline.
82 Chapter 4 W or king with the Canv as and Timeline During this section, f eel free to place your clips in the T imeline repeatedly t o build a longer sequence to experiment with, or place Sample Cli.
Chapter 4 W or king with the Canv as and Timeline 83 T r y This Change the window lay out for a larger view of the C anv as: Choose W indow > Arrange > T wo Up . Timeline Canv as Display a sequence in Image+W ireframe mode in the Can vas: Choose Image+Wireframe from the Vie w pop-up menu in the Can vas.
84 Chapter 4 W or king with the Canv as and Timeline Update the Viewer to show the current frame in the Can vas: Play the sequence , and notice that the frame dis played in the Viewer is di erent from the one displayed in the C anv as. Click the Show Match Frame butt on in the Canv as.
Chapter 4 W or king with the Canv as and Timeline 85 Set markers in the Timeline to mark specic poin ts in a sequence: Click the Add Marker button in the Canv as to set a mark er in the Timeline at the 1 current position of the playhead . Add Marker button Reposition the playhead in the Canv as, and this time pr ess M to add another marker .
86 Chapter 4 W or king with the Canv as and Timeline W ork with T racks in the Timeline Jump In: As you work with clips in your sequenc e, you can select clips in specic tracks, lock tracks so clip.
Chapter 4 W or king with the Canv as and Timeline 87 Lock a track to keep it from chang ing: Click the Lock T rack control f or a track to prevent changes to that track. Y ou can lock a track anytime that you w ant to make sure the timing and positioning of items on a track won ’t change while making edits on other tracks.
88 Chapter 4 W or king with the Canv as and Timeline Place only the video portion of a clip in a sequence: Click the a1 and a2 Source controls f or the audio tracks to disconnect them from their 1 Destination controls.
Chapter 4 W or king with the Canv as and Timeline 89 Place only the audio portion of a clip in a sequence: Click the a1 and a2 Sourc e contro ls f or the audi o tra cks aga in to rec onnect th em to their 1 Destination controls. This allows the a udio por tion of a clip to be placed in the sequence.
90 Chapter 4 W or king with the Canv as and Timeline Add new tracks to a sequenc e: Choose Sequence > Insert T racks. 1 T ype “1” in the Inser t N Video T racks eld to add a new video track, type “2” in the Insert 2 N Audio Tr acks eld to add two audio tracks , then click OK.
Chapter 4 W or king with the Canv as and Timeline 91 Set a video destination track befor e placing clips in a sequence: Drag the v1 Source control t o the V2 D estination con trol to specify that the V2 track 1 should be the destination track. Click the Source control to connect it to the V2 Destination control, if necessary.
92 Chapter 4 W or king with the Canv as and Timeline Set audio destination tracks bef ore placing clips in a sequence: Drag the a1 and a2 Source controls t o the A3 and A4 audio Destination contr ols. 1 Drag the a1 and a2 Source controls to the A3 and A4 Destination controls.
Chapter 4 W or king with the Canv as and Timeline 93 Edit Clips int o a Sequence in the Timeline Jump In: After buildi ng a se quenc e, you may need t o make change s, such a s rep lacing one c lip with another , adding cuta ways, and adding music or sound eects.
94 Chapter 4 W or king with the Canv as and Timeline Mark a clip in the sequence and replace it: Move the playhead to a clip in the T imeline that you wan t to replace. 1 Choose Mark > Mark Clip. The sequenc e clip is marked with In and Out points on both 2 ends in the T imeline.
Chapter 4 W or king with the Canv as and Timeline 95 Place a clip so that it starts at a specic point in a sequence: Place the playhead on a frame in the sequence wher e you would like to add a clip . 1 (Anywhere will do .) Press I t o set an In p oint f or the sequence in the Timeline.
96 Chapter 4 W or king with the Canv as and Timeline Place a clip so that it ends at a s pecic point in a sequence: Place the playhead on a frame in the sequence wher e you would like the incoming clip 1 to end. Press O t o set an Out p oint f or the sequence in the Timeline.
Chapter 4 W or king with the Canv as and Timeline 97 In the Viewer , set an In poin t in a clip. Y ou only need to set an In point. (I f there is an 5 Out point already set, choose Mark > Clear Out to remove the Out point.
.
5 99 Basic Editing The heart of video editing involve s ar ranging and trimming clips in a sequence. Final C ut Pro pr ovides easy-to-use tools and editing procedure s for ecient editing . Next, you ’ll try out basic video editing methods and use simple tools to select and trim clips.
1 00 Chapter 5 Basic Editing Getting Ready Press C ontrol-U to choose the Standard window layout. 1 Choose File > New > Sequence to cr eate a new sequence. Name the sequence 2 “ T rimming” and press Return. In the Browser , double-click the T r imming sequence icon to open the sequenc e in 3 the T imeline.
Chapter 5 Basic Editing 101 Drag Sample Clip 1 into the V iewer and set In and Out points a t the approximat e 6 locations shown below . These In and Out points ensure that ther e are extra unused frames on each end of the clip . Set In and Out points approximately here .
1 02 Chapter 5 Basic Editing Drag Sample Clip 2 to the Insert section of the Canvas Edit Overlay so that it is placed 9 in the T imeline after Sample Clip 1 . Drag Sample Clip 3 into the V iewer and set In and Out points a t the approximat e 1 0 locations shown below .
Chapter 5 Basic Editing 1 03 T r y This Drag with snapping on or o : Press A t o selec t the Selection tool, if nec essary . Drag Sample Clip 3 right and lef t and notice that the clip automatically snaps t o the end of Sample Clip 2 to facilitate dragging clips into the correct position.
1 04 Chapter 5 Basic Editing P osition the pointer over Sample Clip 2 in the sequence. 3 Drag Sample Clip 2 left or right. N otice that the clip move s left or right without its 4 duration changing. Af ter you slide the clip , the sequenc e adjusts, leaving no gaps.
Chapter 5 Basic Editing 1 05 Change a clip ’ s In or Out point without leaving gaps: Select the Ripple tool in the T ool palette. 1 Ripple tool Y ou use the Ripple tool to move the In point or Out poin t of a clip, shortening or lengthening that clip.
1 06 Chapter 5 Basic Editing Slip a clip ’ s content within the curren t sequence In and Out points: Select the Slip tool in the T ool palette. 1 Slip tool The Slip tool allows you t o change the contents of a clip (the portion of the clip ’ s media that is shown) without changing the clip ’ s position or duration in the sequence.
Chapter 5 Basic Editing 1 07 Make Simple Split Edits and Cutawa ys Jump In: Y ou can create split edits in a clip t o have the audio begin pla ying before the video or have the video appear befor e the clip ’ s audio star ts. T o create a split edit, you give a clip ’ s audio and video items di erent In points or Out points.
1 08 Chapter 5 Basic Editing By defa ult, the video it em and aud io it ems of a clip are linked t ogether . Whe n you select the video item and change it, the audio items change also. T o make a split edit, you unlink the video and audio items of a clip so that you can change them independen tly .
Chapter 5 Basic Editing 1 09 T r y This Create a J-cut, in which the audio precedes the video: Click the Linked Selection button in the Timeline button bar to turn linked selection o . 1 Y ou can now change the audio and video items of a clip separat ely .
11 0 Chapter 5 Basic Editing Click the Play Around C ur rent F rame button in the Canvas t o see how the split edit works . 4 Play Around Curren t Frame button When you click the Play Ar ound Current F rame button, pla yback begins just before the current playhead position and continue s just past the playhead.
Chapter 5 Basic Editing 111 Experiment with setting up split edits. 5 Click the Linked Selection button to link the video and audio tracks again. 6 Add a short cutaway shot to a sequence: P osition the playhead in Sample Clip 3 in the Timeline at the appro ximate position 1 shown below , and pr ess I to set an In point.
11 2 Chapter 5 Basic Editing Double-click Sample Clip 2 in the Browser to open it in the Viewer . Position the 3 playhead at the appro ximate position shown below , and press I to set an In point.
Chapter 5 Basic Editing 11 3 Learning About the T r im Edit Window Once you ’ve nalized or nearly nalized a sequenc e, you can begin the polishing process of trimming clips using the Trim E dit window . T o open the T rim Edit window , you choose Sequence > T rim Edit or double-click an edit point in a sequence with the Selection tool.
11 4 Chapter 5 Basic Editing The left side of the window shows the Out point of the outgoing clip . The In point of the incoming clip appears on the right side of the window .
Chapter 5 Basic Editing 11 5 Key Conc epts Slip edit: Changes the portion of the clip’ s media seen in the sequence, but the position and length of the clip remain the same in the sequence. Slide edit: Moves a clip left or right in the sequence without changing the duration of the clip.
.
6 11 7 W ork ing with Audio F inal Cut P ro provides easy methods for editing and changing the audio associated with your f ootage. In this chapter you ’ll lear n to adjust a clip ’ s audio and work with audio tracks in the T imeline.
11 8 Chapter 6 Working with Audio W ork with a Clip’ s Audio in the Viewer Jump In: Y ou can adjust an individual clip ’ s audio in the Viewer . Final C ut Pro provides an Audio Mixer that allows you to easily adjust the a udio level of your clip and the pan of stereo clip items to change the balance between speakers.
Chapter 6 W or king with Audio 11 9 Y ou can also use the controls in the Viewer ’ s Audio tab to make changes to specic portions of a clip’ s audio.
1 20 Chapter 6 W ork ing with Audio T r y This Set up for working with audio: Choose W indow > Arrange > A udio Mixing to set up your windows in a con venient arrangement for working with audio . Notice that the A udio Mixer appears in the T ool Bench window in the upper-right corner of this window layout.
Chapter 6 W or king with Audio 121 Play an audio clip in the Viewer: With the Viewer active, play some of the clip and watch the progress of the pla yhead through the audio . Audio tab Scrub audio forward or backward: Choose V iew > Audio Scrubbing to turn on audio scrubbing .
12 2 Chapter 6 W or king with Audio Change a clip ’ s audio level using the Audio Mixer: Drag the A1 or A2 fader slider up or down in the Audio Mixer to change the clip ’ s audio level. Play the clip to hear the di erences as you change the audio lev el.
Chapter 6 W or king with Audio 12 3 Change a clip ’ s audio level using the Lev el slider in the Viewer: Drag the Level slider in the Viewer ’ s Audio tab left or right to change the audio level.
1 24 Chapter 6 W ork ing with Audio Add markers during playback: Play the audio track. As the clip plays back, pr ess the M key whenever you wan t to add a marker . Y ou can add markers on the y this way to mark signicant sounds or video frames.
Chapter 6 W or king with Audio 1 25 Change Audio L evels over Time Jump In: Y ou can adjust a clip ’ s audio so that the audio level and pan change over time . T o make audio level or pan changes during a clip , you set keyframe s at specic frames where the audio should change.
12 6 Chapter 6 W or king with Audio T r y This Increase a clip ’ s audio level ov er time using keyframes: With Audio Clip 1 open in the Audio tab of the Viewer , drag the fader sliders in the 1 Audio Mixer all the way t o the bottom to set the audio lev el at the lowest lev el possible.
Chapter 6 W or king with Audio 12 7 Click the Level Keyfr ame button to add an audio lev el keyframe to the clip at the 5 position of the playhead. Drag the Level slider in the Viewer ’ s Audio tab to 0 (zero) to increase the audio o ver time. 6 Drag the slider until the Level field dis plays 0 (zero).
1 28 Chapter 6 W ork ing with Audio Decrease the audio level o ver time using keyframes: P osition the playhead where you want the audio level t o begin to decrease , 1 somewhere near the end of the clip. P osition the playhead here. Click the Level Keyfr ame button to add a keyframe to the clip at the position of the 2 playhead.
Chapter 6 W or king with Audio 1 29 Drag the Level slider t o the left to decrease the audio level all the wa y. 5 Drag the Level slider to decrease the audio level.
1 30 Chapter 6 W ork ing with Audio Edit a sound using keyframes: P osition the playhead at the beginning of a sound, such as a click or pop, that you want 1 to eliminate. For now , just pick the beginning of the second whistle in A udio Clip 1 . P osition the playhead at the beginning of the sound.
Chapter 6 W or king with Audio 131 Press the Right Arro w key once to move the pla yhead forward one frame, then click 3 the Level Keyframe butt on to add a keyframe. Position the pla yhead at the end of the sound and click the Level Keyframe butt on to add a keyframe at that point.
13 2 Chapter 6 W ork ing with Audio P osition the pointer in the middle of the four keyframes that you just added , and drag 5 the audio level ov er lay (the pink line) down t o decrease the audio level. Y ou’ve now isolated a sound in the audio clip and decreased the sound’ s audio level.
Chapter 6 W or king with Audio 13 3 P osition the playhead where you want to make an audio level change , and drag a fader slider in the Audio Mixer .
1 34 Chapter 6 W ork ing with Audio W ork with Audio T racks in the Timeline Jump In: Next you’ll add clips to a sequenc e in the Timeline and tr y out some of the Timeline audio track options and contr ols.
Chapter 6 W or king with Audio 13 5 Getting Ready Click in the Timeline to make it ac tive , then press Home. 1 With Audio Clip 1 open in the V iewer , drag the drag hand in the Viewer window down 2 to tracks A3 and A4 in the Timeline. When you release the mouse button, the audio clip items appear in tracks in the Timeline.
13 6 Chapter 6 W or king with Audio Delete a clip’ s audio: With the audio clip items selected , press Delete. Y ou’ve now r emoved the clip ’ s audio, leaving only the video . Y ou could now add a voiceov er , a di erent audio clip , or a music clip to the silent video footage .
Chapter 6 W or king with Audio 13 7 Display a udio level ov erlays: Click the Clip Overlays control in the T imeline to displa y the audio level keyframes applied to the clip. Clip Overlays control T rim an audio clip: Select the Razor Blade tool in the T ool palette.
13 8 Chapter 6 W or king with Audio Change audio ov er time by adjusting keyframe s in the Timeline: P osition the S election tool over the a udio level overla y in an audio track and drag to change the audio level. Experiment with changing audio level keyframes in the Timeline.
Chapter 6 W or king with Audio 13 9 Balance the over all audio lev el of a sequence in the Timeline: P osition the Timeline playhead ov er the audio clip items. 1 Drag the slider of the Audio Mixer’ s Master fader up or down to adjust the overall audio 2 output level of the entire sequence .
1 40 Chapter 6 Working with Audio Key Conc epts Clip Overlays control: Displays audio le vel overla ys on clips in the audio tracks of the Timeline. With the ov erlays display ed, you can work with audio lev el keyframes in the Timeline, changing audio levels for specic portions of a clip.
7 141 Creating V oiceov ers F inal Cut P ro provides the V oice Over tool for recor ding voiceo vers f or documentaries , shorts, and any other kind of movie using narration. In this section, y ou’ll use the Voic e Over tool to add a narrative track t o your video .
1 42 Chapter 7 Creating V oiceovers T o use the V oice Over tool, you need a microphone built in or attached to your computer , and optionally you can use headphones to monit or your recording.
Chapter 7 Creating Voiceov ers 1 43 If you haven ’t already , you can choose Window > Arrange > Audio Mixing to choose a 8 window layout con venient for using the Voice Over tool. Drag Sample Clip 1 and Sample Clip 2 into the Timeline, one af ter the other .
14 4 Chapter 7 Creating Voic eovers Specify a clip name for the rst voic eover clip: T ype a name for your voiceover a udio clip in the Name eld. Set an audio destination track f or your voiceover clip: Drag the a2 audio Source con trol to the A3 Destination contr ol to set track A3 as the destination track for y our voiceov er clips.
Chapter 7 Creating Voiceov ers 1 45 T urn o audio playback for the sample clip in the Timeline: Click the Track Visibilit y buttons for the A1 and A2 a udio tracks of the Timeline to turn o audio playback for these tr acks. T his prevents the clip ’ s audio from being picked up in the background as you record y our voiceover .
1 46 Chapter 7 Creating V oiceovers Listen to the new voic eover clip: Click the Review button to hear the clip . Click the Review button again to stop playing the clip.
Chapter 7 Creating Voiceov ers 1 47 Specify headphone settings in the V oice Over tool (if you’ re using headphones): Adjust the Volume slider to set y our headphones to a comfortable listening level.
1 48 Chapter 7 Creating V oiceovers Record multiple takes of a voic eover clip: P osition the playhead in the Timeline where y ou want recording t o start. 1 Click the Record button and recor d a clip. 2 Click Record or press the Esc key to stop r ecording.
Chapter 7 Creating Voiceov ers 1 49 Delete takes that you don ’t want: Click a take to select it in the Timeline , then press Delete . Record a voiceo ver clip within a specic interval of your sequence: P osition the playhead in the Timeline where y ou want recording t o start, then pre ss I to 1 set an In point.
1 50 Chapter 7 Creating Voiceovers T o record a second take, click the Record button again and record the sec ond take. 6 Multiple takes appear stacked in the audio tracks, aligned with the In and Out points you set. Experiment with creating multiple takes of a recording within a set duration.
8 151 Adding Video F ilters and T ransitions Y ou can add profe ssional touches to y our movie by applying lters to clips to cr eate special looks or e ects and adding transitions between your clips .
15 2 Chapter 8 Adding Video Filters and Tr ansitions Apply F ilters to Clips Jump In: Y ou can apply a lt er to a clip in a sequen ce b y doub le-clic king the clip t o open it in the Viewer and then choosing the lter you want to use fr om the E ects menu.
Chapter 8 Adding Video Filters and T ransitions 15 3 Getting Ready Choose W indow > Arrange > T wo Up . 1 Choose File > New > Sequence to cr eate a new empty sequence in your project. 2 Name the sequence “Filt ers” and press Return. 3 In the Browser , double-click the F ilters sequence to open it in the Timeline.
1 54 Chapter 8 Adding V ideo Filt ers and Transitions Adjust the Sepia lter for a clip: Drag the Amount slider to change the amount of sepia color applied t o the clip. If a red line appears in the T imeline ov er clips in your sequence , press Option-R Note: to render the clips for pla yback.
Chapter 8 Adding Video Filters and T ransitions 15 5 Apply a Color Tint lter to a clip: Choose E ects > Video Filters > Quick Time > Color Tint. 1 Reset button “ Tint type” pop-up menu Choose di erent tint styles from the “ Tint type” pop-up menu to see their e ect on 2 the clip.
15 6 Chapter 8 Adding Video Filters and Transitions Change a lter over time using k eyframes: With Bl ack and White cho sen in the “ Tint type ” pop-up me nu f or the Col or Tint lt er , cl ick 1 in the T imeline and press Home t o position the playhead at the beginning of the clip .
Chapter 8 Adding Video Filters and T ransitions 15 7 Make Simple Color Corrections Jump In: When you hav e color or exposure problems with a clip , you can apply a c olor correction lter to make basic corrections.
15 8 Chapter 8 Adding Video F ilters and Transitions Getting Ready Drag Sample Clip 2 into the Timeline and then double-click it to open it in the Viewer . T r y This Apply the Color C orrec tor 3-wa y lter to a clip in a sequence: Choose E ects > Video Filters > C olor Correction > Color Corrector 3-way .
Chapter 8 Adding Video Filters and T ransitions 15 9 Add T ransitions Between Clips Jump In: Y ou can use video transitions to make visually e ective changes between clips. Nex t, you’ll try adding transitions to the sample clips and get acquainted with the v ariet y of transitions you can use.
1 60 Chapter 8 Adding Video Filt ers and T ransitions Set In and Out points similar to the ones you see in the illustration. 5 Leav e about 2 seconds of unused footage at the end of the clip . F inal Cut Pro requires these unused frames, called a handle , to creat e a transition.
Chapter 8 Adding Video Filters and T ransitions 161 Create handles at the beginning and end of the clip b y setting an In point and an Out 8 point similar to the ones you see in the illustr ation. Leav e about 2 seconds of unused footage at the beginning of the clip .
16 2 Chapter 8 Adding Video Filters and Tr ansitions T r y This Add a clip with a transition to a sequenc e: Drag Sample Clip 2 from the V iewer to the Insert with Transition section of the Canv as 1 Edit Overlay . Drag Sample Clip 2 here. Final C ut Pro adds the clip t o the sequence, placing a default cross dissolve transition at the edit point.
Chapter 8 Adding Video Filters and T ransitions 16 3 Delete a transition: Click the transition in the Timeline to select it. 1 Press Delete . 2 Add a transition to an edit poin t: Click the line between two clips in the Timeline to select the edit point.
1 64 Chapter 8 Adding Video Filt ers and T ransitions Get to know the available video transitions: Select the transition in the Timeline . 1 T r y applying di erent transitions by doing any of the f ollowing: 2 Choose E ects > Video Transitions > 3D Simulation > Z o om.
Chapter 8 Adding Video Filters and T ransitions 16 5 Learning About T ransitions When you add a transition between clips , the length of your clips and the sequence length don ’t change. The transition takes up time between the outgoing and incoming clips.
1 66 Chapter 8 Adding Video Filt ers and T ransitions If you want to use transitions between clips , you should plan the In and Out poin ts of your clips to allow a transition to occur without a ecting the content you want shown. The conten t you want to appear bef ore and af ter the transition must be locat ed as shown below .
Chapter 8 Adding Video Filters and T ransitions 16 7 Y ou can lengthen or shorten a transition by dragging its edges. But keep in mind that changing the length of the transition also changes what cont ent appears just before or after the transition.
1 68 Chapter 8 Adding Video Filt ers and T ransitions When you initially ingest your clips , you should include some extra footage ar ound the scene or event that a clip sho ws. Final Cut P ro requires extra footage before an In point or after an Out point to create a transition.
Chapter 8 Adding Video Filters and T ransitions 16 9 Key Conc epts Filter: A lter c an chan ge the loo k of a cl ip o r be u sed to eli minat e or mask out portions of a clip .
.
9 17 1 Outputting Y our F inished Movie After you ’ve completed editing y our movie , y ou have numerous options for deliv er ing your w ork. Y ou can send your completed movie , a sequence , or even a single clip to another Final C ut Studio application for further work.
17 2 Chapter 9 Outputting Y our Finished Movie Create a Quick T ime Movie Jump In: Y ou can export a sequence or clip as a self-contained QuickTime mo vie that can be viewed on many computers and in applica tions that are compatible with Quick Time.
Chapter 9 Outputting Y our Finished Movie 17 3 Expor t a Movie in a Specic F ile Format Jump In: If you need to conv er t your movie to a specic f or mat, Final Cut P ro provides many format options.
17 4 Chapter 9 Outputting Y our Finished Movie T r y This Export your sequence for display on iP od: With your sequence open in the Timeline and the Timeline active , choose File > Share. 1 Output T ype pop-up menu Choose Movies from the Destination F older pop-up menu to set that folder as the 2 destination for the output media le .
Chapter 9 Outputting Y our Finished Movie 17 5 Export your sequence for display on Y ouT ube: With your sequence open in the Timeline and the Timeline active , choose File > Share. 1 Leav e the Movies folder set as the de stination folder in the Destination F older 2 pop-up menu.
17 6 Chapter 9 Outputting Y our Finished Movie Export a streaming sequence suitable for viewing on a website: Open a sequence in the Timeline that you’ d like to expor t for viewing on a website . 1 Choose File > Export > Using Quick T ime Con version.
10 17 7 Getting Answers Now that y ou’ ve been introduced to F inal Cut P ro , you probably hav e fur ther questions about ho w to set up F inal Cut Pro t o match your editing style and use its f eatures e ectively . Use Final C ut Pro Help to nd the answers you need .
17 8 Chapter 1 0 Getting Answers Learn about working with high denition video formats and s pecic types of media supported by Final C ut Pro: In Final C ut Pro , choose Help > F inal Cut Pro Help , then click F inal Cut P ro 7: Professional Formats and Worko ws.
デバイスApple 7の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Apple 7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはApple 7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Apple 7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Apple 7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Apple 7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はApple 7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Apple 7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちApple 7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。