AppleメーカーBV9150の使用説明書/サービス説明書
ページ先へ移動 of 29
iPod® is a trademark of Apple, Inc. registered in the U.S. and other countries. Boss Audio Systems is not affiliated with Apple, Inc. User’ s Manual B V9150 MP3-C OMP A TIBLE DOUBLE-DIN IN-DASH D VD/MP3/CD AM/FM RECEIVER WITH 4.
T o ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving..
4.5" In-Dash Double-DIN DVD/MP3/CD Receiver with USB, SD Memory Card Ports and Front Panel AV Input.
1. HANDLING COMP ACT DISCS MOISTURE CONDENSAT ION NOTES ON CDs P. 2 P. 3 P. 4 P. 1 P. 6 P. 7 1. 2. 3. 4. 5. Stickers that are beginning to peel away leave a sticky residue (P .6). Labels are attached (P .7). On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit.
E - 2 2. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
E - 3 DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. DETACHABLE CONTROL P ANEL (D.C.P .) Removing The Detachable Control Panel (D.C.P .). 2 Attaching the DCP CAUTION DO NOT insert the D.
E - 4 3. ELECTRICAL CONNECTION a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a converter will be necessary). b. Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse box.
4 E - 5 MUTE BUTTON PANEL RELEASE BUTTON POWER BUTTON FUNCTION SELECT BUTTON BAND/ LOUDNESS/ APL/NTSC BUTTON AMS/ PLAY/PAUSE BUTTON LOC BUTTON SCAN BUTTON FM MONO / STEREO BUTTON ENCODER VOLUME KNOB D.
E - 6.
E - 7 5. BASIC OPERATION POWER BUTTON Press power button to turn on/off the unit. Press this button to remove the control panel. PANEL RELEASE BUTTON MUTE BUTTON ( MUTE) Press MUTE button to mute the sound quickly. the display is flashing Press it again to restore the previous sound level.
E - 8 Basic operation of menu setup 1. General setup menu In main menu,touch " " to enter into " SETTINGS " mode. 2.Choose menu setup * Touch cursor and choose setup menu. 3.Enter or exit menu * Touch in the menu and enter into " SETTINGS " menu.
E - 9 7 . RADIO OPERATION RADIO FUNCTION KEY Touch the icon in any mode to go back to the main menu and select " RADIO " to enter the radio mode.
E - 1 0 Use this control to select stereo or mono reception for FM radio stations. You can sometimes improve reception of distant stations by selecting mono mode. FM MONO / STEREO BUTTON (MONO) LOCAL / DX BUTTON (LOC) This control can be used to change between Local and Distant (-DX) tuning mode.
AUDIO OSD OK MENU TITLE NUM + + 8 . DISC/MUL TI-MEDIA FILES OPERATIONS E - 11 CURRENT DIRECTORY NAME The playing file is a Music file. The playing file is a Photo file.
E - 1 2 MULTI-MEDIA FILE OR FOLDER SEARCHING Selecting a Track to Play 1. Use the UP/DOWN/LEFT/RIGHT direction buttons to move to different file/folder Numbers. 2. Press OK on a file number, and that file will begin to play , or by direct numeric input, 3.
E - 1 3 PROGRAM BUTTON (PROG) A. For example:Press numeric button 2 ,PROGRAM 0002 appears it means track 2 will be player first then press numeric button 4 and PROGRAM 0004 appears,press the different.
E - 1 4 9 . PLAY MUL TI-MEDIA FILES OPERATION Current directory name Current file name. The playing file is a Music file. The playing file is a Photo file.
E - 1 5 1 0 . MMC/SD CARD & USB DEVICE OPERATIONS START THE USB DEVICE MODE 1.The USB mini socket is accessible as indicated in picture 1.(P .1) 2.
E - 1 6 START THE SD/MMC MODE CAUTION 2.Please make sure to insert the SD or MMC card in the correct direction / orientation as indicated in picture 7(P .7). Wrong insert will cause permanent & serious damage to the unit & the SD or MMC card. TO STOP SD/MMC CARD PLAYBACK 1.
1 1 . VIDEO DISC OPERATIONS E - 1 7 S.N Name Function Description Information bar DISPLAY DISC INFO. BACK TO MAIN MENU MOVE CURSOR UP/DOWN/LEFT/RIGHT CONFIRM SELECTED INFORMATION PAUSE/PLAY BACK TO MA.
10 11 12 13 USER/STDY /BRIG/ SOFT /SHAR E - 1 8 14 HUE - / HUE + Press this button briefly to pause disc play, press again to resume play . PLAY BUTTON ( ) Stop the current disc playback. Press STOP two times consecutively to enter the clear stop mode.
NUMERIC BUTTONS Use when playback disc which need numeric Selection or Input, like in the Goto function, etc. In order to achieve the best image display effect, you must adjust the player signal system to match your TV set. PAL/NTSC BUTTON (P/N) 3 types of TV color signal system are available: NTSC, PAL60 or Automatic mode.
E - 2 0 PBC FUNCTION BUTTON (PBC) NOTE: This only operates with the PBC function on VCD. GO TO BUTTON (GO TO) Using GO TO feature to select track number or specific time: A. Press GO TO button,the screen will display the following message: B. Press Arrow Left/Right buttons to highlight the track/title/chapter number or the time Option.
2. Press OSD button once to additionally display the disc type, current chapter or track, and total number of chapters or tracks. Also displayed is the current title, total number of titles. Press OSD button a second time to additionally display the disc type,Audio language/type/# of channels, subtitle language, and angle selection.
1 2 . SET UP MENU OPERATION General Steps of Setup Menu 1) Press the Setup button, the main setup menu appears. When the main menu displayed, the Video will auto pause.
Setup Items Introduction 4) Press the Arrow buttons to highlight the Exit Setup option, then press Enter or Setup again to exit Setup Menu. When setup, the pressing setup buttons will turn off the setup menu, while the choices that have been changed will be saved.
E - 2 4 TV TYPE 16 : 9 (Wide Screen): Choose this setting if your player is connected to a wide screen TV . If you choose this setting and you don't have a wide screen TV , the images on the screen may appear distorted due to vertical compression.
Highlight the AUDIO LANG option, and press the Arrow buttons to choose the audio language you prefer. Press Enter to confirm. If the disc you are playing has that language available, it will output audio in that language. Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the subtitle language you prefer.
AM (MW) Frequency Range Intermediate Frequency Usable Sensitivity S/N Ratio 1 3 . SPECIFICATIONS CD PLAYER GENERAL Power Supply Polarity Speaker impedance Power Output REMARK : Specifications subject to change without notice.
デバイスApple BV9150の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Apple BV9150をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはApple BV9150の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Apple BV9150の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Apple BV9150で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Apple BV9150を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はApple BV9150の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Apple BV9150に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちApple BV9150デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。