AppleメーカーDIGITAL CAMCORDERの使用説明書/サービス説明書
ページ先へ移動 of 22
.
FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
T able of Contents Getting Started ................................................................ 1 Knowing your camcorder parts ............................................................. 1 Installing the battery..................................
1 Getting Started Knowing your camcorder parts SD card slot (inside the battery cover) Bottom view T ripod socket Battery cover Flash strobe Lens Speaker Strap hook Power button Shutter button A V OUT.
2 Please charge the battery at least 8 hours for rst time use. 1. Connect the cable. Connect one end of the supplied AC adapter to the USB port of the camcorder and the other end to a wall outlet. OR Connect one end of the supplied USB cable to the USB port of the camcorder and the other end to a powered PC.
3 T o insert a memory card, do the followings: (1) Open the battery cover . (2) Gently push the card as indicated until the card reaches the bottom of the slot. T o remove the memory card, gently push the card and it will pop up. Then pull the card out of the slot.
4 Setting language 1. Power on the camcorder . 2. Press the MODE key to enter the MODE menu. 3. Use the Joystick switch to select the Setting mode and press OK to enter the menu screen. 4. Use the Joystick to select the Language item, and then Press OK to conrm.
5 Reading LCD indicators 1 Mode icon Remaining recordable time Video resolution While Balance mode Picture resolution Exposure mode LED lights mode Flash mode Macro mode Histogram mode Battery life Se.
6 Recording a video clip 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory is inserted before recording.
7 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory is inserted before recording. - 30cm ~ (12” ~ ) 5cm ~ 30cm (2” ~ 12”) * At 1.
8 Playing back your recordings 1. Press the MODE button and use the Joystick to switch to “ My Works ” mode. Or press the Play/Pause button ( ) on the left side of the LCD monitor . 2. There are two folders below My works: Video and Picture . Select Video or Picture, and then press the OK key to enter the index mode.
9 Installing software Please notice that the recorded videos are .mov format. So you need some special programs to view the recordings on PC. For rst time use, please make sure you have QuickTime 7.0 player on your PC. If not, Please follow the below instructions to install the software rst.
10 Connecting the camcorder to TV Please follow the below instructions to connect your camcorder and TV via accessory A V cables for real-time display . Y ou can display your video clips and still pictures on your TV , sharing them with your friends and family .
1 1 Connecting the camcorder to Standard TV TV = T raditional CRT TV 1. Power on the camcorder . 2. Press the MODE key to enter the Mode menu. 3. Use the Joystick switch to the Setting mode and press OK to enter the menu screen. 4. Use the Joystick to select the TV -out item, and then press OK to conrm.
12 Menu operation The menu items provide several options for you to ne-tune your camera functions. The following table gives details on menu operations. How to... Action Bring up the menu Press the MENU button. Move the highlight bar Use the Joystick to move up or down.
13 Menu items in Playback mode Power-on → Press the MODE button → Use the Joystick to switch to My Works mode → Select Video or Picture folder→ Press the OK button → Press the MENU button. Item Option Description Delete One Y es/No Delete current le.
14 Menu items in Setting mode Power-on → Press the MODE button → Enter the Setting ( ) mode → Press the MENU button. Item Option Description Date & T ime - Set date and time. Beep On/Off Enable/Disable beep sound. Flicker 50Hz Set icker frequency to 50Hz*.
15 Menu items in Setting mode (continued) * Flicker settings table: Region England Germany France Italy Spain Netherlands Russia Setting 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz Region Portugal America T ai.
16 Still picture Video clip Number of shots Recording time (minute) 1 10 30 * shoot every 30 seconds ** ash is off *** resolution is set to 5M (2560x1920) * resolution is set to HD (1280x720 pixels) Note: This table is for your reference only . The actual battery life depends on your battery type and recharge level.
17 Specications Item Description Model 5 Mega-pixel camera Image sensor 5 Mega (2592x1944 pixels) Resolution Still image: 3M/5M 1280x720 (HD) 720x480 (D1) 352x288 (CIF) Lens 3X optical zoom lens Fi.
18 System requirements are different in different video resolution settings: Video Resolution PC system requirements HD (1280x720) @30fps OS = Windows XP SP2 or above (QuickT ime 7.
82-441-90010v1.0.
デバイスApple DIGITAL CAMCORDERの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Apple DIGITAL CAMCORDERをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはApple DIGITAL CAMCORDERの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Apple DIGITAL CAMCORDERの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Apple DIGITAL CAMCORDERで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Apple DIGITAL CAMCORDERを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はApple DIGITAL CAMCORDERの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Apple DIGITAL CAMCORDERに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちApple DIGITAL CAMCORDERデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。