ABC Officeメーカー6550 (25-1/2")の使用説明書/サービス説明書
ページ先へ移動 of 9
1 “When You Need More Than Staples.” Toll Free: 800 - 658 - 8788 Fax: 801 - 927 - 3037 info@abcoffice.com IDEAL CUTTERS Model 4850 (18 - 3/4”) Model 4850 - 90 (18 - 3/4”) Model 5250 (20 - 1/2.
2 Safety Rules • Ensure that at no time more than one person is working at the machine. • Leave the key for the safety lock with the person responsible for the cutting machine. • Power operated cutting machines must be operated only by trained and reliable personnel.
3 The entire machine is dispatched in one package, but the stand has been dismounted from the machine. The tool box contains: - a set of tools for service and maintenance, - the mounting hardware for the stand, - the back ga uge crank (#3) with a mounting screw, - two keys for safety lock.
4 The key can be removed to prevent unauthorized use. To activate the machine, turn the key 45º to the right. • Re - set button (#14) Before the knife can be activated on models IDEAL 4850, IDEAL 5250 and IDEAL 6550, the re - set butt on has to be pressed to re - establish the “ready to cut” status of the machine.
5 Under the viewing window (#16) the measuring scale rotates in accordance with the back gauge movement. The exact measurement is to be r ead beneath the indicator.
6 Maintenance Knife change Precise cuts are only possible with a sharp knife. The knife should be changed as soon as the quality and the accuracy of a cut are not in accordance with the standards expected from this cutting ma chine. Should the knife jam in the paper pile or leave grooves in the paper, it must be changed immediately.
7 IDEAL 6550 - 90: Remove knife screws (B and C). Loosen knife holders and lower the knife downwards from the knife carrier (#19). Then, due to the length of the knife, a sideways movement between the knife guide plate s is required for removal. h. Take out cutting stick (#2), turn, rotate or exchange it and place it back into machine.
8 IMPORTANT – If the knife has been lowered by means of the cut ting depth adjustment screw (#6) to compensate for a worn cutting stick , then this adjustment screw (#6) has to be turned back to its highest setting before the cutting stick (#5) is turned, rotated or exchanged.
9 Should the machine cut out during operation, check the overload switches (#11 and #12). If one of the buttons of the overload switches has popped out, it can be re - set a fter a short period. Should the overload switch pop out again and cannot be re - set even after a few minutes, please contact your service technician.
デバイスABC Office 6550 (25-1/2")の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
ABC Office 6550 (25-1/2")をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはABC Office 6550 (25-1/2")の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ABC Office 6550 (25-1/2")の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ABC Office 6550 (25-1/2")で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ABC Office 6550 (25-1/2")を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はABC Office 6550 (25-1/2")の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ABC Office 6550 (25-1/2")に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちABC Office 6550 (25-1/2")デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
