Life FitnessメーカーCLASS Hの使用説明書/サービス説明書
ページ先へ移動 of 26
G7 CABLE MOTION ™ GYM SYSTEM A SSEMBL Y INSTRUCTIONS G7-002 / CLASS H / 10/14/08 / 8352100 REV . B.
2 T ABLE OF CONTENTS Safety S tatement . . . . . . . . . . . . . . . .2 Required Hardware . . . . . . . . . . . . . . . .8 G7 W arning Labels . . . . . . . . . . . . . . .4 Assembly Instructions . . . . . . . . . . . . . .10 Gym Dimensions. . . . . . .
3 INSPECTION 1. DO NOT use or permit use of any equipment that is damaged and or has worn or broken part s. For all LIFE FITNESS equipment use only replacement part s supplied by LIFE FITNESS. 2. Cables and Belts pose an extreme liability if used when frayed.
4 G7 W ARNING LABELS NOTE: Lock the weight stack when not using the gym. Make sure all the weight plates are resting on the plate below with no gap in between. Insert the weight selector pin in the tab underneath the weight st ack. The weight selector pin should be inserted until the knob touches the metal t ab.
5 GYM DIMENSIONS Weight: 720 lbs Resistance Ratio: 1:2 Weight S tack: 160 lbs.
6 G7 LIVE AREA 12” 12” 1 0’ 18’-8” NOTE: The live area shows the extent of the G7 gym. It does not include the user ..
7 COMPONENTS LIST ITEM NO. QTY . DESCRIPTION 1 1 LEFT TOWER 2 1 TOP BRACKET TUBE 3 1 MIDDLE BRACKET TUBE 4 1 BOTTOM BRACKET TUBE 5 1 LEFT SLIDE TUBE (WITH ROLLER CARRIAGE) ASSEMBL Y 6 1 RIGHT U BRACKE.
8 COMPONENTS LIST HARDW ARE ITEM NO. QTY . DESCRIPTION 43 32 M10 X 20MM SCREW 44 58 M10 W ASHER 45 20 M5 HEX SCREW 46 20 M6 W ASHER 47 4 M10 X 55MM SCREW 48 2 M10 X 45MM SCREW 49 13 M10 HEX NYLOCK NUT.
9 HARDW ARE: M10 X 50MM HEX TENSION SCREW (#55) M10 HEX NYLOCK NUT (#49) M10 SOCKET NUT (#51) M10 W ASHER (#44) M10.5 W ASHER (#58) M10 X 20MM SCREW (#43) M5 HEX SCREW (#45) M5 SHOULDER SCREW (#56) M6.
10 1 44 43 44 43 2 3 11 4 44 43 44 43 1 11 A B NOTE: T wo person assembly is recommended. STEP 1: Use the following hardware contained in Blister Pack (7-1): M10 x 20mm SCREW (Qty . 24) M10 W ASHER (Qty . 24) Make sure the LEFT T OWER (1) and the RIGHT TOWER (1 1) are positioned correctly prior to assembly .
11 12 50 44 44 49 1 11 44 50 STEP 2: Use the following hardware contained in Blister Pack (7-1): M10 x 70mm SCREW (Qty . 4) M10 W ASHER (Qty . 8) M10 HEX NYLOCK NUT (Qty .
12 STEP 3: Use the following hardware contained in Blister Pack (7-2): M10 x 45mm SCREW (Qty . 2) M10 W ASHER (Qty . 8) M10 HEX NYLOCK NUT (Qty . 4) M10 x 55mm SCREW (Qty . 2) Slide the top of the LEFT SLIDE TUBE ASSEMBL Y (5) over the UPPER BRACKET (C) on the LEFT T OWER (1).
13 STEP 4: Use the following hardware contained in Blister Pack (7-2): M5 SHOULDER SCREW (Qty . 32) M5 HEX SCREW (Qty . 8) M6 W ASHER (Qty .
14 55 15 54 18 17 G 20 16 11 19 26 59 STEP 5: Use the following hardware contained in Blister Pack (7-3): M10 x 50mm HEX TENSION SCREW (Qty . 4) GUIDE ROD RET AINER (Qty . 4) RET AINER RING (Qty . 4) NOTE: INST ALL FROM THE INSIDE OF THE UNIT .
15 STEP 6: Uncoil the cables to remove all twists. Remove the (UPPER) PULLEYS (13) on the RIGHT T OWER (1 1) and LEFT TOWER (1) by removing the M10 x 50mm SCREW (52), PULLEY RET AINER (53), M10 SOCKET HEAD NUT (51), and P ARTIAL PULLEY COVERS (14).
16 STEP 7: Use the following hardware contained in Blister Packs (7-3), (7-4) and (7-5): M10 W ASHER (Qty . 4) M10 HEX NYLOCK NUT (Qty . 2) M10 x 45mm SCREW (Qty . 2) M10 SOCKET HEAD NUT (Qty . 2) M10 x 50mm SCREW (Qty . 2) PULLEY RET AINER (Qty .
Slide Mechanism to insert or Exchange Handles Cable K M J L K I 17 STEP 8: Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (M) from the QUICK CONNECT COU- PLER (I). Carefully remove the QUICK CONNECT SPRING (L), the QUICK CONNECT SLEEVE (K) and the QUICK CONNECT HOUSING (J).
18 STEP 9: Make adjustments to the HEAD PLA TE PULLEY (19) and the threaded cable end to adjust cable length and to ensure the cable is taut. If the threaded cable end is completely threaded into the LEFT ROLLER CARRIAGE (28) and there is still some slack in the CABLE (21), remove the pulley from the HEAD PLA TE PULLEY (19).
19 22 44 43 43 44 1 STEP 10: Use the following hardware contained in Blister Pack (7-4): M10 x 20mm SCREW (Qty . 8) M10 W ASHER (Qty . 8) Install one FOOT EXTENSION (22) to the bottom of the LEFT T OWER (1) using four M10 x 20mm SCREWS (43) and four M10 W ASHERS (44).
20 11 3 25 46 45 58 57 24 50 44 44 49 3 25 STEP 1 1: Use the following hardware contained in Blister Pack (7-6): M5 HEX SCREW (Qty . 12) M6 W ASHER (Qty . 12) M10 x 16mm SCREW (Qty . 12) M10.5 W ASHER (Qty . 12) M10 x 70mm SCREW (Qty .
21 STEP 12: Adjust the rollers if the ROLLER CARRIAGE (28) rolls up and down the tube with dif ficulty , or if it seems to sloppy . Unscrew the cable end from the roller carriage housing. Remove the SCREWS (N) that hold the two PLASTIC COVERS (O) together .
22 39 31 32 36 35 STEP 13: The G7 comes with the following accessories: THIGH STRAP (31), FOOT STRAP (32), HANDLES (35), SNAP LINKS (36), LONG BAR (41), and EXERCISE BALL (39).
23 STEP 14: Use the FRONT HANDLE (Q) to tilt the bench. S teer the bench to align with the U BRACKETS (R). Insert one PIN (S) into each bracket so the bench is restrained.
24 MAINTENANCE Please note: * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your Life Fitness cus- tomer service representative at (800) 351-3737. * Inspect equipment before each use.
25 LIMITED W ARRANTY Life Fitness® G7 Cable Motion™ Gym System Life Fitness extends the following LIMITED W ARRANTY to the original owner (proof of purchase required, keep your receipt with this manual) of the Life Fitness product. The W arranty terms apply to IN HOME and LIGHT INSTITUTIONAL USE ONL Y .
C ORPORA TE H EADQUARTERS 5100 North River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • F AX: 847.288.3703 800.735.3867 (T oll-free within U.S.A., Canada) I NTERNA TIONAL O FFICES G7-002 Rev A 10/08 A MERICA ’ S North America Life Fitness Inc.
デバイスLife Fitness CLASS Hの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Life Fitness CLASS Hをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLife Fitness CLASS Hの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Life Fitness CLASS Hの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Life Fitness CLASS Hで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Life Fitness CLASS Hを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLife Fitness CLASS Hの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Life Fitness CLASS Hに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLife Fitness CLASS Hデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。