Life FitnessメーカーSM40の使用説明書/サービス説明書
ページ先へ移動 of 22
M051-K50-C121 1 4 STA CK MULTI-JUNGLE (SM40) UNPA CKING A ND A SSEMBLY INSTRUCTIONS.
SM40 U npacking & Assembly Instructions 2 The SM40 c om es partially assem bled. Follow the steps below to com plete the as sem bly. WA RNING: COMPONENTS O F THE SM40 ARE LARGE AND HEAVY.
SM 40 Unpacking & Assembly Instr uctions 3 UNPA CKING Follow the steps below when unpacking the c om ponents of the SM40. 1. Cut off the shipping wrapper. 2. Remove the parts box a nd shipping boards. 3. Remove the item s in the parts box . These item s are shown in Figure 1.
SM40 U npacking & Assembly Instructions 4 A SSEMBLY Figure 2 shows an ass em bled SM40. Figure 2. SM40 main components (seats and cables remov ed for clarity). 1. Cube 2. Low row bench 3. Lat bench 4. Lat top 5. Tric ep top 6. Adj. X -over top 7. 150 lb.
SM 40 Unpacking & Assembly Instr uctions 5 Figure 3. Configura tion for 2-3/4” and 3” bolts. 2. Bolt on the teardr op pulle ys above the benches ( see Figure 3) us ing four 3/8” x 2- 3/4” hex head bolts. Inc lude the 3/8” flat washer, end cap washer s, end caps and 3/8” Ny loc (lock nut).
SM40 U npacking & Assembly Instructions 6 3. Mount the tops. Mount the 56” lat top to the cell by inserting two of the large 7/16” by 6” bolts using the hardware c onfiguration s hown in Figure 5. Use a 5/8” soc ket with extension and com bination wrenc h.
SM 40 Unpacking & Assembly Instr uctions 7 4. Install the w eight stacks. To do this : A. Using a 9/16” soc ket and c om bination wrench, rem ove the tric ep back rest bolts (see Figure 10) . B. Using a 9/16” soc ket and c om bination wrench, unbolt the top plate and rem ove the guide rods (s ee Figure 10).
SM40 U npacking & Assembly Instructions 8 F. W ith the top plate on the guide rods, bolt on the top plate to the top of the cells as shown in Figure 8 using a 9/16” s ock et and com bination wrench and the 3” bolts (with cap washers) that were previously inserted.
SM 40 Unpacking & Assembly Instr uctions 9 6. Mount adjustable pulley bracket. W hen shipped, the adjustable pulley brack et looks like the one s hown in Figure 10. The bolts need to be rem oved and the brack et needs to be positioned so that the top of the brack et is in the top hole as shown by the ar row in Figure 10.
SM40 U npacking & Assembly Instructions 10 Figure 12. Bolt t he benches to the frame..
SM 40 Unpacking & Assembly Instr uctions 11 INSTA LLING THE CABLES The SM40 us es four cables. T here are thr ee diff erent types of cable used on the SM40. T hey are: 1. Adjustable c able (ball end cable) ( 1). 2. Low row cable (the long cable) ( 1).
SM40 U npacking & Assembly Instructions 12 ADJUSTABLE CROSSOVER CABLE RO UTI NG Once you’ve removed the pulleys as desc ribed previously, route the cros sover cable as shown in Figure 14.
SM 40 Unpacking & Assembly Instr uctions 13 Figure 15. Adjustable crossover cab le end detail. Using a 7/8” wrench, tighten the j am nut onto the adjustable pulley threads as shown in Figure 15. Place a rubber c ap on the top of the cable as shown in Figure 15 (right) .
SM40 U npacking & Assembly Instructions 14 Bolt the cable to the weight stack s as s hown in Figure 17. Thr ead the 7/8” nut up on the cable bolt as shown at lef t. Screw the bolt down into the weight stack as shown at right. Tighten the bolt with a 7/8” com bination wrench.
SM 40 Unpacking & Assembly Instr uctions 15 TRICEP PUSHDOW N CABLE RO UTI NG Route the tricep pushdown cable as shown in Figure 19. Screw the cable into the weight stac k as shown previously in Figure 17. Figure 19. Tricep pus hdow n cable routing.
SM40 U npacking & Assembly Instructions 16 HA RDWARE 0123456 ½½½½½½ Hardware F igure 1. Assembly Parts..
SM 40 Unpacking & Assembly Instr uctions 17 The parts shown in Hardware Figure 1 are us ed to assem ble the SM40. T hey are: A. 7/16” x 6” hex head bolt (used to bolt the tric ep top beam , adjustable c rossover top beam, lat top beam s , and connecting beam to the tops of the cubes ) B.
SM40 U npacking & Assembly Instructions 18 The part s hown in Hardware Figure 3 is the 9/16” c able jam nut that’s used to s ecure the cables to the weight stack s. Hardware Figure 3. Cable ja m nut. M. Cable jam nut Hardware Figure 4 shows the types of cables that ar e included with the SM40.
SM 40 Unpacking & Assembly Instr uctions 19 Hardware F igure 5. T op assemblies. S. Teardr op pulleys (bolt on above tricep station, lat pulldown and seated row benches ) T. 56” Lat top (bolt to top of c ells with pulley s above lat benches) U. 29” Tr icep top (bolt on to 56” lat top bar ) V.
SM40 U npacking & Assembly Instructions 20 Hardware Figure 6. Weight stack rubber bumpers. W . W eight s tack rubber bum pers (inserted under weight stac ks ) Hardware Figure 7.
SM 40 Unpacking & Assembly Instr uctions 21 PA RTS LIST Part # ID Description Quantity Main components 1 2 3 4 5 6 7 8 Cubes Low row bench Lat bench Lat tops Tr icep top Adj.
SM40 U npacking & Assembly Instructions 22 0017-00101-1413 0017-00104-0368 0017-00103-0217 Pulley hardw are (installed) 1-3/4” Bolt Cap washer 3/8” Nyloc nut 0017-00101-1413 0017-00104-0313 00.
デバイスLife Fitness SM40の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Life Fitness SM40をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLife Fitness SM40の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Life Fitness SM40の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Life Fitness SM40で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Life Fitness SM40を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLife Fitness SM40の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Life Fitness SM40に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLife Fitness SM40デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
