LincolnメーカーMKX (2015)の使用説明書/サービス説明書
ページ先へ移動 of 453
June 2014 First Printing Owner’s Manual Lincoln MKX Litho in U.S.A. FA1J 19A321 AA Owner’ s M anual 201 5 MKX Owner’ s M anual 201 5 MKX lincolnowner.
Introduction 9 Child Safety 17 Installing child seats .................................... 1 9 Booster seats ......................................... 2 6 Child seat positioning ................................... 2 9 Child safety locks ..............
MyKey 62 Settings, MyKey ....................................... 6 2 Creating ............................................. 6 3 C l e a r i n g ............................................. 6 4 System status ......................................... 6 4 Remote start, MyKey .
Windows and Mirrors 93 Power windows ....................................... 9 3 E x t e r i o rm i r r o r s ....................................... 9 5 Interior mirrors ....................................... 9 7 Sun visors .........................
Starting and Stopping the Engine 144 Engine block heater ................................... 1 4 8 Fuel and Refueling 150 Fuel quality ......................................... 1 5 1 Running out of fuel .................................... 1 5 2 R e f u e l i n g .
Driving Aids 194 Blind Spot Information System (BLIS) with Cross T raffic Alert ( C T A ) ............................................. 1 9 4 Collision warning system ................................ 1 9 9 Steering ....................................
Maintenance 251 General information ................................... 2 5 1 Opening and closing the hood ............................ 2 5 2 Under hood overview .................................. 2 5 3 Engine oil dipstick ............................
Wheels and Tires 285 T ire care ........................................... 2 8 7 Using snow chains .................................... 3 0 2 T ire Pressure Monitoring System (TPMS) ................... 3 0 3 Changing a road wheel ....................
Appendices 41 1 Scheduled Maintenance 429 Normal scheduled maintenance and log ..................... 4 3 4 Index 446 The information contained in this publication was correct at the time of going to print.
ABOUT THIS MANUAL Thank you for choosing Ford. W e recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
SYMBOL GLOSSAR Y These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert See Owner’ s Manual Anti-lock braking system A void .
Symbol Description Symbol Description Symbol Description Lighting control Low tire pressure warning Maintain correct fluid level Panic alarm Parking aid system Parking brake system Power steering flui.
Event Data Recording This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle; this data will assist in understanding how a vehicle’ s systems performed.
Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC® or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assis.
LINCOLN AUTOMOTIVE FINANCIAL SERVICES (U.S. ONL Y) Lincoln Automotive Financial Services offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Lincoln Automotive Financial Services, thank you for your business.
SPECIAL NOTICES New V ehicle Limited W arranty For a detailed description of what is covered and what is not covered by your vehicle’ s New V ehicle Limited W arranty , see the warranty information that is provided to you along with your owner’ s manual.
EXPORT UNIQUE (NON–UNITED ST A TES/CANADA) VEHICLE SPECIFIC INFORMA TION For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this owner’ s manual.
GENERAL INFORMA TION See the following sections for directions on how to properly use safety restraints for children. W ARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle.
Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat).
INST ALLING CHILD SEA TS Child Seats Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts W ARNING: Airbags can kill or injure a child in a child seat.
• Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed in the upright position.
3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions.
8. Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt.
Using Lower Anchors and T ethers for CHildren (LA TCH) W ARNING: Never attach two child safety seats to the same anchor . In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
The LA TCH anchors are located at the rear section of the rear seat between the cushion and seatback below the symbols as shown. Follow the child seat manufacturer’ s instructions to properly install a child seat with LA TCH attachments. Follow the instructions on attaching child safety seats with tether straps.
Combining Safety Belt and LA TCH Lower Anchors for Attaching Child Safety Seats When used in combination, either the safety belt or the LA TCH lower anchors may be attached first, provided a proper installation is achieved. Attach the tether strap afterward, if included with the child seat.
2. Locate the correct anchor behind the gap cover for the selected seating position. 3. Pull the gap cover to expose the anchors. Clip the tether strap to the anchor as shown. 4. T ighten the child safety seat tether strap according to the manufacturer’ s instructions.
Booster seats should be used until you can answer YES to ALL of these questions when the child is seated without a booster seat. • Can the child sit all the way back against their vehicle seat with .
• High back booster seats If, with a backless booster seat, you cannot find a seating position that adequately supports your child’ s head, a high back booster seat would be a better choice.
If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat. Check with the booster seat manufacturer’ s instructions.
W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. W ARNING: T o avoid risk of injury , do not leave children or pets unattended in your vehicle.
CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door and must be set separately for each door . When these locks are set, the rear doors cannot be opened from the inside. • Insert the key and turn to the lock position (key horizontal) to engage the childproof locks.
PRINCIPLES OF OPERA TION W ARNING: Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash, which may result in serious injury or death. W ARNING: Do not allow people to travel in any area of your vehicle that does not have seats and safety belts.
W ARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. W ARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child.
F ASTENING THE SAFETY BEL TS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
T o adjust the comfort guide: 1. Slip the shoulder belt into the belt guide. 2. Slide the guide up or down along the webbing so that the belt is centered on the occupant’ s shoulder . Using Safety Belts During Pregnancy W ARNING: Always ride and drive with your seatback upright and the safety belt properly fastened.
Safety Belt Locking Modes W ARNING: After any vehicle crash, the safety belt system at all passenger seating positions must be checked by an authorized dealer to verify that the automatic locking retractor feature for child seats is still functioning properly .
When to Use the Automatic Locking Mode This mode should be used any time a child safety seat, except a booster , is installed in passenger front or rear seating positions. Children 12 years old and under should be properly restrained in a rear seating position whenever possible.
SAFETY BEL T HEIGHT ADJUSTMENT W ARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder . Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a crash.
If... Then... The driver safety belt is buckled before the ignition switch is turned to the on position... The safety belt warning light and indicator chime remain off.
Deactivating and Activating the Belt-Minder™ Feature W ARNING: While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. W e recommend you leave the system activated for yourself and others who may use the vehicle.
One-time Belt-Minder™ Disable If at any time the driver or front passenger quickly buckles then unbuckles the safety belt for that seating position, the system is disabled for the current ignition cycle. The feature will enable during the same ignition cycle if the occupant buckles and remains buckled for about 30 seconds.
PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries.
PRINCIPLES OF OPERA TION W ARNING: Airbags do not inflate slowly or gently , and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module.
The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.
DRIVER AND P ASSENGER AIRBAGS W ARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury .
Proper Driver and Front Passenger Seating Adjustment W ARNING: The National Highway T raffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’ s chest and the driver airbag module.
FRONT P ASSENGER SENSING SYSTEM W ARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position.
The front passenger sensing system is designed to disable (will not inflate) the front passenger’ s frontal airbag when the front passenger seat is unoccupied, or a rear facing infant seat, a forward-facing child restraint, or a booster seat is detected.
Occupant Passenger airbag status indicator Passenger airbag Child OFF: Lit Disabled ON: Unlit Adult OFF: Unlit Enabled ON: Lit Note: When the passenger airbag status indicator OFF lamp is illuminated, the passenger side airbag (seat mounted) may be disabled to avoid the risk of airbag deployment injuries.
If there are lodged objects or cargo is interfering with the seat, take the following steps to remove the obstruction: • Pull the vehicle over . • T urn the vehicle off. • Driver and adult passengers should check for any objects lodged underneath the front passenger seat or cargo interfering with the seat.
W ARNING: Do not attempt to service, repair , or modify the airbag, its fuses or the seat cover on a seat containing an airbag, as you could be seriously injured or killed. Contact your authorized dealer as soon as possible. W ARNING: If the side airbag has deployed, the airbag will not function again.
SAFETY CANOPY™ CURT AIN AIRBAGS W ARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
The Safety Canopy will deploy during significant side crashes or when a certain likelihood of a rollover event is detected by the rollover sensor . The Safety Canopy is mounted to the roof side-rail sheet metal, behind the headliner , above each row of seats.
CRASH SENSORS AND AIRBAG INDICA TOR W ARNING: Modifying or adding equipment to the front end of your vehicle (including frame, bumper , front end body structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury .
The fact that the safety belt pretensioners or airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather , it means the restraints control module determined the accident conditions (such as crash severity , belt usage) were not appropriate to activate these safety devices.
GENERAL INFORMA TION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditio.
REMOTE CONTROL Intelligent Access Key Y our intelligent access keys operate the power locks and the remote start system. The key must be in your vehicle to activate the push-button start system. The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door .
2. T wist a thin coin under the tab hidden behind the backup key head to remove the battery cover . Do not use the backup key to remove the cover or you could damage the intelligent access key . 3. Remove the old battery . 4. Insert a new battery with the + facing downward.
3. Press and hold memory button 1 for about five seconds. A tone will sound after about two seconds. Continue to hold until you hear a second tone. 4. Press the lock button on the remote control within three seconds. Repeat this procedure with memory button 2 and a second transmitter if desired.
V ehicles with automatic climate control can be configured to operate when the vehicle is remote started. See the Climate Control chapter for more information. A manual climate control system will run at the setting it was set to when your vehicle was last turned off.
The power windows will not work during the remote start and the radio will not turn on automatically . The parking lamps will remain on and your vehicle will run for 5, 10, or 15 minutes, depending on the setting. See the Information Displays chapter to select the duration of the remote start system.
PRINCIPLES OF OPERA TION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys.
• Audio system maximum volume of 45% for some audio systems. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. • Always on setting.
Note: Y ou can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey . Once you have switched the engine off, however , you will need an admin key to change or clear your MyKey settings. CLEARING ALL MYKEYS Y ou can clear all MyKeys within the same key cycle as you created the MyKey .
MYKEY TROUBLESHOOTING Condition Potential causes I cannot create a MyKey . • The key or fob used to start the vehicle does not have admin privileges. • The key or fob used to start the vehicle is the only admin key (there always has to be at least one admin key).
LOCKING AND UNLOCKING Y ou can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A. Unlock B. Lock Remote Control Y ou can use the remote control anytime your vehicle is not running.
Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the lamps will not flash. Power Liftgate W ARNING: Make sure all persons are clear of the liftgate area before using power liftgate control.
At the Liftgate Press the exterior liftgate release button on the top of the liftgate pull-cup handle. Smart Unlocks The smart unlock feature is intended to prevent you from unintentionally locking your intelligent access key inside your vehicle’ s passenger compartment or rear cargo area.
Autounlock Feature (If Enabled) The autounlock feature unlocks all the doors when: • the ignition is on, all the doors are closed, and your vehicle has been in motion at a speed greater than 12 mph .
Battery Saver If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.
Opening and Closing the Power Liftgate Note: Y ou can reverse the liftgate movement direction with a second press of the instrument panel button or the button on the liftgate, or a second double press of the transmitter button. The liftgate will only operate with the vehicle in P.
Obstacle Detection When closing: The system will reverse to full open when it detects an obstacle. A chime will sound three times as the liftgate begins to reopen. Remove the obstacle to close the liftgate. Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce and activate obstacle detection.
Note: Do not hang anything, for example a bike rack, from the spoiler , glass or liftgate. This could damage the liftgate and its components. Note: Do not leave the liftgate open while driving. This could damage to the liftgate and its components. The liftgate area is only intended for cargo, not passengers.
Programming a Personal Entry Code T o create your own personal entry code: 1. Enter the factory-set code. 2. Press the 1 • 2 on the keypad within five seconds. 3. Enter your personal 5-digit code. Y ou must enter each number within five seconds of each other .
Anti-Scan Feature The keypad will go into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp will flash.
SECURILOCK® P ASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection.
Programming a Spare Intelligent Access Key Note: A maximum of four intelligent access keys can be programmed to your vehicle. Y ou must take your vehicle and all access keys to your authorized dealer .
8. V erify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that the vehicle starts with new intelligent access key .
ADJUSTING THE STEERING WHEEL W ARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter . 1. Unlock the steering column.
Power Tilt and T elescope Steering Column (If Equipped) W ARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting in the Correct Position in the Seats chapter .
T o reset the steering column to its original stopping position: 1. Be sure that there is nothing blocking the motion of the steering column or wheel. 2. Press and hold the steering column control until the steering column stops moving. 3. Press and hold the steering column control again.
CRUISE CONTROL T ype 1 T ype 2 See the Cruise Control chapter for information on this feature. SET RES CNCL ON OFF GAP 82 Steering Wheel 2014 MKX (mkx) Owners Guide gf, 1st Printing, June 2014 USA (fu.
INFORMA TION DISPLA Y CONTROL See the Information Displays chapter for more information. Cluster Display Control Features Use this control to adjust the right side of the cluster display . Navigate through the screen and press OK to select. See the MyLincoln T ouch chapter .
WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD W ASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.
LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off.
When the lighting control is in the autolamps position, the headlamps will automatically turn on in low light situations or when wipers are activated. The headlamps remain on for a period of time after you switch the ignition off. Use the information display controls to adjust the period of time that the headlamps remain on.
HEADLAMP EXIT DELA Y Y ou can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. T urn the ignition off.
3. Make sure the transmission selector lever is not in position P . 4. Make sure the parking brake is disengaged. FRONT FOG LAMPS The fog lamps can be turned on when the lighting control is in the headlamps, parking lamps or autolamps positions and the high beams are not turned on.
The system will only work with the lighting control switch in the autolamp position. Note: There is a delay of two to five seconds before the adaptive headlamp system will operate when the vehicle is driven. Note: The system is only active at speeds above 3 mph (5 km/h).
INTERIOR LAMPS Dome Lamp Control W ithout fog lamps W ith fog lamps Use to manually turn the dome lamp on. • Press the control. This will turn on the interior courtesy lights.
Front Row Map Lamps (If Equipped) T o turn on the map lamps, press the outer edge of the clear lens. The front row map lamp lights when: • any door is opened. • the dome lamp button on the instrument panel is activated. • the remote entry controls are pressed and the ignition is off.
POWER WINDOWS W ARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. W ARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Bounce-Back The window will stop automatically while closing and reverse some distance if there is an obstacle in the way . Overriding the Bounce-Back Feature W ARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle.
EXTERIOR MIRRORS Power Exterior Mirrors W ARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Off C. Right mirror T o adjust your mirrors: 1. Select the mirror you want to adjust. 2. Move the control in the direction you want to tilt the mirror .
Integrated Blind Spot Mirrors (If Equipped) W ARNING: Objects in the blind spot mirror are closer than they appear . Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors. They are designed to assist you by increasing visibility along the side of your vehicle.
INTERIOR MIRROR W ARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. Y ou can adjust the interior mirror to your preference.
Illuminated Visor V anity Mirror Lift the cover to switch on the lamp. P ANORAMIC VIST A ROOF® AND POWER SUNSHADES (IF EQUIPPED) W ARNING: Do not let children play with the panoramic Vista Roof® and power sunshade or leave children unattended in the vehicle.
Opening the Sunshade and Moonroof Note: The moonroof will only open after sunshades are completely open. Press and release the control to open the sunshade. The front and rear sunshades open simultaneously . Press and release the control to open the moonroof.
GAUGES Cluster shown in standard measure – metric clusters similar . A. Left information display . See Information displays for more information. B. Speedometer C.
Adaptive cruise control (if equipped) (RTT) The speed control system indicator light changes color to indicate what mode the system is in: • On (gray light): Illuminates when the adaptive cruise control system is turned on. T urns off when the speed control system is turned off.
Charging system (RTT) Illuminates when the battery is not charging properly . If it stays on while the engine is running, there may be a malfunction with the charging system. Contact your authorized dealer as soon as possible. This indicates a problem with the electrical system or a related component.
High beams Illuminates when the high-beam headlamps are on. Low fuel (RTT) Illuminates when the fuel level in the fuel tank is at or near empty . Low tire pressure warning Illuminates when your tire pressure is low . If the light remains on at start up or while driving, the tire pressure should be checked.
Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Stability Control System Displays when the AdvanceT rac®/T raction control is active. If the light remains on, have the system serviced immediately . Stability Control System Off Illuminates when AdvanceT rac®/T raction control has been disabled by the driver .
GENERAL INFORMA TION W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
• Driver Assist • Settings Scroll up/down to highlight one of the categories, then press the right arrow key or OK to enter into that category . Press the left arrow key as needed to exit back to the main menu. Display Mode Use the up/down arrow buttons to choose between the following display options.
• Bar/Round tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the engine. During SelectShift Automatic™ transmission (SST) use, the currently selected gear will appear in the display .
Fuel Economy Use the left/right arrow buttons to choose the desired fuel economy display . Fuel Economy Fuel Economy Inst. Fuel Economy XX. Min Fuel History Instantaneous fuel usage x Fuel usage over .
Settings In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear . Settings V ehicle DTE Calculation Normal or T owing Easy Entry/Exit — ch.
Settings (cont’d) *MyKey Create MyKey Press and hold OK to create MyKey 911 Assist Always On / User Selectable T raction Control Always On / User Selectable Max Speed Choose desired speed or off Spe.
INFORMA TION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may be abbreviated or shortened depending upon which cluster type you have. Press the OK button to acknowledge and remove some messages from the information display .
Alarm/Security Messages Action / Description T o Stop Alarm, Start V ehicle Displayed when the perimeter alarm system is armed and the vehicle is entered using the key on the driver’ s side door . In order to prevent the perimeter alarm system from triggering, the ignition must be turned to start or on before the 12 second chime expires.
Battery and Charging System Messages Action / Description Check Charging System Displayed when the charging system needs servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible.
BLIS® Messages Action / Description Cross T raffic System Fault Displayed when a fault with the cross traffic alert system has occurred. Contact your authorized dealer as soon as possible. V ehicle Coming From X Displayed when the blind spot information system with cross traffic alert (CT A) system is operating and senses a vehicle.
Collision W arning System Messages Action / Description Collision W arning Malfunction Displayed when there is a system malfunction with the collision warning system.
Keys and Intelligent Access Messages Action / Description No Key Detected Displayed if the intelligent access key is not detected by the system in the following three scenarios: • When the start/stop button is pressed in an attempt to either start the engine or cycle through the ignition states.
Maintenance Messages Action / Description LOW Engine Oil Pressure Stop the vehicle as soon as safely possible, turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact your authorized dealer as soon as possible.
MyKey® Messages Action / Description V ehicle Near MyKey T op Speed Displayed when a MyKey® is in use and the MyKey speed limit is on and the vehicle speed is 80 mph (130 km/h). V ehicle Near MyKey T op Speed Displayed when a MyKey® is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph (130 km/h).
Reminder Messages Action / Description Steering Lock T urn Wheel to Unlock Displays when you need to turn the steering wheel in order to disengage the steering lock. Shift to Park Displayed when the engine is turned off and shift select lever is in any position other than P (Park).
DUAL AUTOMA TIC TEMPERA TURE CONTROL SYSTEM Note: Y ou can switch temperature units between Fahrenheit and Celsius. See Settings in the MyLincoln T ouch chapter . A. MyT emp: Allows you to quickly adjust to a frequently used setting with a single touch.
E. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This position is more economical and efficient than normal air conditioning. F. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air .
During extreme high ambient temperatures when idling stationary for extended periods of time in gear , it is recommended to run the air conditioning in the MAX A/C mode, adjust the blower fan speed to the lowest setting and put the vehicle’ s transmission into position P to continue to receive cool air from your air conditioning system.
CABIN AIR FIL TER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system. Y our vehicle is equipped with a filter; the access door is located behind the glove box.
Automatic Climate Systems Automatic Settings Y ou can set the climate control to operate in AUTO mode through the information display setting: Remote Start > Climate Control > Auto. The climate control system automatically sets the interior temperature to 72°F (22°C).
SITTING IN THE CORRECT POSITION W ARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash.
• Keep sufficient distance between yourself and the steering wheel. W e recommend a minimum of 10 inches (25 centimeters) between your breastbone and the airbag cover . • Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully .
Front Seat and Rear Seat Outboard Head Restraints Rear Seat Center Head Restraint The head restraints consist of: A. An energy absorbing head restraint. B. T wo steel stems. C. Guide sleeve unlock and remove button. D. Guide sleeve adjust and release button.
Tilting Head Restraints (If Equipped) The front head restraints may tilt for extra comfort. T o tilt the head restraint, do the following: 1. Adjust the seatback to an upright driving or riding position. 2. T ilt the head restraint forward by gently pulling the top of the head restraint.
Power Lumbar 130 Seats 2014 MKX (mkx) Owners Guide gf, 1st Printing, June 2014 USA (fus) I n f o r m a t i o n P r o v i d e d b y :.
MEMOR Y FUNCTION The memory control, located on the instrument panel, allows automatic positioning of the following features to two programmable positions: • Driver seat. • Power mirrors. • Optional power steering column. Programming a Memory Position 1.
The seat and steering wheel will move to their original positions when: • Y ou place the transmission in park (P) or neutral (N). • Y ou switch the keyless ignition on. T urn the Easy Entry and Exit feature on or off through the information display settings menu.
Cooled Seats The cooled seats will only function when the engine is running. T o operate the cooled seats: Press the cooled seat symbol located on the touchscreen to cycle through the various cooling settings and off. Cooler settings are indicated by more indicator lights.
REAR SEA TS W ARNING: T o prevent possible damage to the seat or safety belts, make sure that the safety belts are not buckled when folding the seatback. • Reclining the seatback: With the seat occupied, pull the lever up to recline the seatback. • Folding the seatback: With the seat empty , pull the lever up to fold the seatback forward.
REAR SEA T ARMREST Fold the armrest down to use the armrest and cupholder . T o close the armrest, rotate the armrest rearward until the latch clicks. Rear Heated Seats W ARNING: Persons who are unabl.
The heated seats only operate when the ignition is on. T o operate the heated seats: • Press the indicated side of the control for maximum heat. • Press again to deactivate. • Press the indicated side of the control for minimum heat. • Press again to deactivate.
HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) W ARNING: Make sure that the garage door and security device are free from obstruction when you are programming.
Programming Note: Put a new battery in the hand-held transmitter . This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. W ith your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position.
After programming the HomeLink button, follow Step s5–7a sl i s t e d below to program your garage door opener . Note: Y ou may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener .
Programming HomeLink to a Genie Intellicode 2 garage door opener Note: The Genie Intellicode 2 transmitter must already be programmed to operate with the garage door opener . Programing the transmitters T o program HomeLink to the transmitter you must first put the transmitter into programming mode.
Programming HomeLink to the Genie Intellicode garage door opener motor Note: Y ou may need a ladder to access the garage door opener motor . T o program HomeLink to the garage door opener motor: 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’ s turn on.
AUXILIAR Y POWER POINTS Note: Do not insert objects other than an accessory plug into the power point. This will damage the outlet and blow the fuse. Note: Do not hang any type of accessory or accessory bracket from the plug. Note: Improper use of the power outlet can cause damage not covered by your warranty .
CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. A vailable console features include: A. Cupholders B. Cover: T wo pen holders, travel tissue pack holder , and business card or paper holder .
GENERAL INFORMA TION W ARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. W ARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover .
Ignition Modes Off: T urns the ignition off. • W ithout applying the brake pedal, press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not running.
The system does not function if: • The key frequencies are jammed. • The key battery has no charge. If you are unable to start your vehicle, do the following: 1. Locate the key backup slot at the front of the center console storage compartment. 2.
Stopping the Engine When Y our V ehicle Is Stationary 1. Move the transmission selector lever to position P. 2. Press the button once. 3. Apply the parking brake. Note: This switches off the ignition, all electrical circuits, warning lamps and indicators.
ENGINE BLOCK HEA TER (IF EQUIPPED) W ARNING: Failure to follow engine block heater instructions could result in property damage or personal injury . W ARNING: Do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters.
• Keep plug terminals clean and free of dirt and corrosion. • Make sure the heater system is checked for proper operation before winter . Using the Engine Block Heater Make sure the receptacle terminals are clean and dry before use. T o clean them, use a dry cloth.
SAFETY PRECAUTIONS W ARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. W ARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
• A void inhaling fuel vapors. Inhaling too much fuel vapor of any kind can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of fuel vapor can cause serious illness and permanent injury . • A void getting fuel liquid in your eyes.
Octane Recommendations Regular unleaded gasoline with a pump (R+M)/2 octane rating of 87 is recommended. Some stations offer fuels posted as “Regular” with an octane rating below 87, particularly in high altitude areas. Fuels with octane levels below 87 are not recommended.
Note: Do not use aftermarket funnels; they will not work with the capless fuel system and can damage it. The included funnel has been specially designed to work safely with your vehicle. When filling the vehicle’ s fuel tank from a portable fuel container , use the funnel included with the vehicle.
Use the following guidelines to avoid electrostatic charge build-up when filling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in the vehicle (including the cargo area). • Keep the fuel pump nozzle in contact with the fuel container while filling.
4. Insert either the fuel fill nozzle or the fuel fill funnel provided with the vehicle several times to dislodge any debris and/or allow the inlet to close properly . If this action corrects the problem, the message may not reset immediately . It may take several driving cycles for the message to turn off.
3. After at least three to five tank fill-ups, fill the fuel tank and record the current odometer reading. 4. Subtract your initial odometer reading from the current odometer reading. 5. Calculate fuel economy as follows: Standard: Divide miles traveled by gallons used.
The scheduled maintenance items listed in Scheduled Maintenance Information are essential to the life and performance of your vehicle and to its emissions system.
3. The fuel fill inlet may not have been properly closed. See Easy Fuel® No Cap Fuel System in this chapter . 4. Driving through deep water—the electrical system may be wet. These temporary malfunctions can be corrected by filling the fuel tank with good quality fuel, properly closing the fuel fill inlet or letting the electrical system dry out.
The OBD-II system is designed to check the emission control system during normal driving. A complete check may take several days. If the vehicle is not ready for I/M testing, the following driving cyc.
AUTOMA TIC TRANSMISSION W ARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). T urn the ignition to the off position and remove the key whenever you leave your vehicle. Y our vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking.
When using the paddles for manual shifting: • Pull the right paddle (+) to upshift. • Pull the left paddl e(–)t o downshift. Upshift to the recommended shift speeds according to the following ch.
Automatic T ransmission Adaptive Learning This feature is designed to increase durability and provide consistent shift feel over the life of the vehicle. A new vehicle or transmission may have firm shifts, soft shifts or both. This operation is considered normal and will not affect function or durability of the transmission.
2. Locate the brake shift interlock lever in front of the shifter assembly . 3. Apply the brake pedal. Gently push and hold the brake shift interlock lever while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position.
USING YOUR ALL-WHEEL DRIVE (A WD) SYSTEM (IF EQUIPPED) A WD uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicles cannot. The A WD system is active all the time and requires no input from the operator .
Driving In Special Conditions With All-Wheel Drive (A WD) A WD vehicles are equipped for driving on sand, snow , mud and rough roads and have operating characteristics that are somewhat different from conventional vehicles, both on and off the highway .
W ARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail and injure a passenger or bystander . Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur .
Sand When driving over sand, try to keep all four wheels on the most solid area of the trail. A void reducing the tire pressures but shift to a lower gear and drive steadily through the terrain. Apply the accelerator slowly and avoid excessive wheel slip.
After driving through mud, clean off residue stuck to rotating driveshafts and tires. Excess mud stuck on tires and rotating driveshafts causes an imbalance that could damage drive components. Note: Driving through deep water may damage the transmission.
Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral; instead, disengage overdrive or manually shift to a lower gear . When descending a steep hill, avoid sudden hard braking as you could lose control.
Make sure you allow sufficient distance between you and other vehicles for stopping. Drive slower than usual and consider using one of the lower gears. In emergency stopping situations, apply the brake steadily . Since your vehicle is equipped with a four wheel anti-lock brake system (ABS), do not “pump” the brakes.
GENERAL INFORMA TION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out.
Anti-Lock Brake System This system helps you maintain steering control during emergency stops by keeping the brakes from locking. This lamp momentarily illuminates when you turn the ignition on. If the light does not illuminate during start-up, remains on or flashes, the anti-lock brake system may be disabled.
HILL ST ART ASSIST W ARNING: The hill start assist feature does not replace the parking brake. When you leave the vehicle, always apply the parking brake and shift the transmission into park (P). W ARNING: Y ou must remain in the vehicle once you have activated the hill start assist feature.
PRINCIPLES OF OPERA TION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time.
PRINCIPLES OF OPERA TION W ARNING: V ehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceT rac® system.
A V ehicle without AdvanceT rac with RSC skidding off its intended route. B V ehicle with AdvanceT rac with RSC maintaining control on a slippery surface.
SENSING SYSTEM W ARNING: T o help avoid personal injury , please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds.
The system can be turned off using the information display control. Refer to the Information Display chapter . If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on.
REAR VIEW CAMERA SYSTEM W ARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R (Reverse). The system uses two types of guides to help you see what is behind your vehicle: 1.
Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Y ellow zone D.
Manual Zoom W ARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse). Note: When manual zoom is enabled, only the centerline is shown.
PRINCIPLES OF OPERA TION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL W ARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery .
Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press SET up or down and hold to increase or decrease the set speed.
W ARNING: Do not use the adaptive cruise control when entering or leaving a highway , in heavy traffic or on roads that are winding, slippery or unpaved. W ARNING: Do not use in poor visibility , specifically fog, rain, spray or snow . Note: It is your responsibility to stay alert, drive safely and be in control of your vehicle at all times.
Setting Adaptive Cruise Control 1. Press and release ON . The information display will show the gray indicator light, current gap setting and SET . The system is set to standby mode. 2. Accelerate to the desired speed. 3. Press SET upward and release.
When a vehicle ahead of you enters the same lane or a slower vehicle is ahead in the same lane, the vehicle speed adjusts to maintain a preset gap distance.
Graphic display (bars between vehicles) Following distance Following distance at 60 mph (100 km/h) Dynamic behavior 1 bar 1 second 31 yards (28 m) Sporty 2 bars 1.
• Increase or decrease the speed in increments of 1 mph (2 km/h) by briefly pressing SET upward or downward. The system may apply the brakes to slow your vehicle down to the new set speed. The set speed will display continuously in the information display while the system is active.
Detection Issues The radar sensor has a limited field of vision. It may not detect vehicles at all or detect a vehicle later than expected in some situations. The lead vehicle graphic will not illuminate if the system does not detect a vehicle in front of you.
Blocked Sensor W ARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled. Failing to do so may result in loss of vehicle control, which could result in serious injury .
Cause Action Swirling water , or snow or ice on the surface of the road may interfere with the radar signals. Do not use system in these conditions because it may not detect any vehicle ahead. Y ou are in a desert or remote area with no other vehicles and no roadside objects.
BLIND SPOT INFORMA TION SYSTEM (BLIS®) WITH CROSS TRAFFIC ALERT (CT A) (IF EQUIPPED) W ARNING: T o help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes.
Using the Systems BLIS® turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) or N (Neutral). If shifted out of D (Drive) or N (Neutral), the system enters CT A mode.
Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited. System Lights and Messages The BLIS® and CT A systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from.
System Sensors W ARNING: Just prior to the system recognizing a blocked condition and alerting the driver , the number of missed objects will increase. T o help avoid injuries, NEVER use the BLIS® as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
System Limitations The BLIS® and CT A systems do have their limitations; situations such as severe weather conditions or debris build-up on the sensor area may limit vehicle detection. The following are other situations that may limit the BLIS®: • Certain maneuvering of vehicles entering and exiting the blind zone.
Y ou can also have one or both systems switched off permanently at an authorized dealer . Once switched off, the system can only be switched back on at an authorized dealer . COLLISION W ARNING SYSTEM (IF EQUIPPED) W ARNING: This system is designed to be a supplementary driving aid.
Using the Collision W arning System W ARNING: The collision warning system’ s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’ s brakes. The brake pedal must be pressed just like any typical braking situation.
Cause Action Heavy rain, spray , snow , or fog is interfering with the radar signals The collision warning system is temporarily disabled. Collision warning should automatically reactivate a short time after the weather conditions improve.
STEERING T o help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than three to five seconds while the engine is running. • Do not operate the vehicle with a low power steering pump fluid reservoir level (below the MIN mark on the reservoir).
CARGO NETS W ARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided in one of the two configurations. Repeat the attachment on both sides of the vehicle.
T ype 2 CARGO MANAGEMENT SYSTEM The system is located in the floor of the cargo area. Lift the release handle to open. 204 Load Carrying 2014 MKX (mkx) Owners Guide gf, 1st Printing, June 2014 USA (fu.
ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) W ARNING: When loading the roof racks, we recommend you evenly distribute the load, as well as maintain a low center of gravity . Loaded vehicles, with higher centers of gravity , may handle differently than unloaded vehicles.
UTILITY HOOK Y ou can use the utility hook to hang small items such as grocery bags. Do not hang more than 10 pounds (4.5 kilograms) on the hook. LOAD LIMIT V ehicle Loading – With and Without a T r.
Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the T ire Label on the B-Pillar or the edge of the driver’ s door (vehicles exported outside the US and Canada may not have a T ire Label).
Example only: Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload.
GA WR (Gross Axle W eight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label.
• Example only: W ARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury .
GCW (Gross Combined W eight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer . GCWR (Gross Combined W eight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers – that the vehicle can handle without risking damage.
Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’ s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
• Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity . Y ou and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb.
TOWING A TRAILER W ARNING: Do not exceed the GVWR or the GA WR specified on the certification label. W ARNING: T owing trailers beyond the maximum recommended gross trailer weight exceeds the limit of.
TRAILER SW A Y CONTROL W ARNING: T urning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situ.
Y our vehicle may tow a trailer provided the maximum trailer weight is less than or equal to the maximum trailer weight listed for your vehicle configuration on the following chart. Powertrain Maximum GCWR Maximum trailer weight 3.7L T iVCT front-wheel drive * 6770 lb (3071 kg) 2000 lb (907 kg) 3.
T railer T owing Connector (V ehicles Equipped with a T railer-towing or Prep Package) The trailer towing connector is located under the rear bumper , on the left side of your vehicle. Y ou must use a four -pin trailer wiring connector for your vehicle and the trailer lighting equipment.
T railer Brakes W ARNING: Do not connect a trailer’ s hydraulic brake system directly to your vehicle’ s brake system. Y our vehicle may not have enough braking power and your chances of having a collision greatly increase.
• T urn off the speed control with heavy loads or in hilly terrain. The speed control may turn off automatically when you are towing on long, steep grades. • Shift to a lower gear when driving down a long or steep hill. Do not apply the brakes continuously , as they may overheat and become less effective.
TRANSPORTING THE VEHICLE If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . W e recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle.
Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. T owing an all-wheel drive vehicle requires that all wheels be off the ground, such as using a wheel lift and dollies or flatbed equipment.
If you tow your vehicle with all four wheels on the ground: • T ow only in the forward direction. • Release the parking brake. • Place the transmission in position N. • Place the ignition in the accessory mode. See Ignition in the Starting and Stopping the Engine chapter .
BREAKING-IN Y ou need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. A void driving too fast during the first 1000 miles (1600 kilometers). V ary your speed frequently and change up through the gears early .
• Drive a heavily loaded vehicle or tow a trailer . • Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost for every 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks).
FLOOR MA TS W ARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
W ARNING: Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects that are loose can become trapped under the pedals causing a loss of vehicle control.
ROADSIDE ASSIST ANCE V ehicles Sold in the United States: Getting Roadside Assistance If you ever need help on the road, the Lincoln Motor Company is there for you with nationwide, 24-hours-a-day , seven-days-a-week assistance. The service is available: • Throughout the life of the vehicle for original owners.
V ehicles sold in the United States: Using roadside assistance United States Lincoln vehicle clients who require Roadside Assistance, call 1-800-521-4140. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest Lincoln dealership within 100 miles (161 kilometers).
HAZARD W ARNING FLASHERS The hazard flasher control is located on the instrument panel by the radio. Use it when your vehicle is disabled and is creating a safety hazard for other motorists. • Press the flasher control and all front and rear direction signals will flash.
Note: When you try to restart your vehicle after a fuel shutoff, the vehicle makes sure that various systems are safe to restart. Once your vehicle determines that the systems are safe, then the vehicle will allow you to restart. Note: In the event that your vehicle does not restart after your third attempt, contact an authorized dealer .
Connecting the Jumper Cables W ARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery .
Jump Starting 1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables.
GETTING THE SERVICES YOU NEED W arranty repairs to your vehicle must be performed by an authorized dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction.
In Canada: Mailing address Lincoln Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6K 1C8 T elephone 1-800-387-9333 Online www .
In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss W arranty Act, or to the extent allowed by state law , before pursuing replacement or repurchase remedies provided by certain state laws.
Y ou are required to submit your warranty dispute to BBB AUTO LINE before asserting in court any rights or remedies conferred by California Civil Code Section 1793.22(b). Y ou are also required to use BBB AUTO LINE before exercising rights or seeking remedies created by the Federal Magnuson-Moss W arranty Act, 15 U.
Y ou can get more information by calling BBB AUTO LINE at 1-800-955-5100, or writing to: BBB AUTO LINE 3033 W ilson Boulevard, Suite 600 Arlington, V irginia 22201 BBB AUTO LINE applications can also be requested by calling the Ford Motor Company Customer Relationship Center at 1-800-392-3673.
GETTING ASSIST ANCE OUTSIDE THE U.S. AND CANADA Before exporting your vehicle to a foreign country , contact the appropriate foreign embassy or consulate. These officials can inform you of local vehicle registration regulations and where to find unleaded fuel.
If your vehicle must be serviced while you are traveling or living in Puerto Rico, contact the nearest authorized dealer . If the authorized dealer cannot help you, contact: FORD MOTOR COMP ANY Custom.
ORDERING ADDITIONAL OWNER’S LITERA TURE T o order the publications in this portfolio, contact Helm, Incorporated at: HELM, INCORPORA TED 47911 Halyard Drive Plymouth, Michigan 48170 Attention: Customer Service Or to order a free publication catalog, call toll free: 1-800-782-4356 Monday-Friday 8:00 a.
REPORTING SAFETY DEFECTS (CANADA ONL Y) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform T ransport Canada, using their toll-free number: 1–800–333–0510, or online at: http://www .
CHANGING A FUSE Fuses W ARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown.
FUSE SPECIFICA TION CHART Power Distribution Box W ARNING: Always disconnect the battery before servicing high current fuses. W ARNING: T o reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
Fuse or relay number Fuse amp rating Protected components 5 40A** Anti-lock brake system pump 6 — Not used 7 30A** Power liftgate 8 20A** Moonroof 9 20A** Power point #2 (console rear) 10 — Not us.
Fuse or relay number Fuse amp rating Protected components 35 — Not used 36 — Rear seat relay 37 — Right trailer tow stop/turn lamps relay 38 — Not used 39 40A** Cooling fan (vehicles with trai.
Fuse or relay number Fuse amp rating Protected components 61 10A* Rear seat release 62 10A* Air conditioner clutch 63 15A* T railer tow stop/turn lamps relay 64 20A* Rear wiper motor 65 15A* Fuel pump.
Fuse or relay number Fuse amp rating Protected components 89 5A* Adaptive lighting 90 10A* Powertrain control module 91 10A* Adaptive cruise control 92 10A* Anti-lock brake system module 93 5A* Blower.
Fuse or relay number Fuse amp rating Protected components 1 30A Driver front smart window 2 15A Not used (spare) 3 30A Passenger front smart window 4 10A Demand lamps relay 5 20A Subwoofer 6 5A Radio frequency module 7 7.
Fuse or relay number Fuse amp rating Protected components 12 15A Interior lighting, Puddle lamps, Backlighting 13 15A Right turn/stop lamps and turn signals 14 15A Left turn/stop lamps and turn signal.
Fuse or relay number Fuse amp rating Protected components 29 20A Radio, Electronic finish panel, SYNC module 30 15A Front park lamps 31 5A Not used (spare) 32 15A Moonroof, Power windows (front), Comp.
GENERAL INFORMA TION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise.
OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom of the instrument panel near the steering column. 2. Go to the front of the vehicle and release the secondary hood latch located under the front passenger side of the hood.
UNDER HOOD OVERVIEW A. Engine coolant reservoir B. Power steering fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F . Air filter assembly G.
ENGINE OIL DIPSTICK A .–M I N B. – MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. T urn the engine off and wait 10 minutes for the oil to drain into the oil pan.
ENGINE COOLANT CHECK Checking the Engine Coolant The concentration and level of engine coolant should be checked at the intervals listed in Scheduled Maintenance Information. Note: Make sure that the level is between the COLD FILL RANGE marks on the coolant reservoir .
W ARNING: Do not add coolant further than the MAX mark. Note: Do not use stop leak pellets, cooling system sealants or additives as they can cause damage to the engine cooling or heating systems. This damage would not be covered under your vehicle’ s warranty .
Recycled Engine Coolant Ford Motor Company does NOT recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in an appropriate manner . Follow your community’ s regulations and standards for recycling and disposing of automotive fluids.
The service engine soon indicator will illuminate. If the engine reaches a preset over -temperature condition, the engine will automatically switch to alternating cylinder operation. Each disabled cylinder acts as an air pump and cools the engine. When this occurs the vehicle will still operate.
4. Check the coolant level and replenish if low . 5. Restart the engine and take your vehicle to an authorized dealer . Note: Driving the vehicle without repairing the engine problem increases the chance of engine damage. T ake your vehicle to an authorized dealer as soon as possible.
Low fluid level If the fluid level is below the MIN range of the dipstick, add fluid to reach the hash mark level. Note: If the fluid level is below the MIN level, do not drive the vehicle. An underfill condition may cause shift and/or engagement concerns and/or possible damage.
If an overfill occurs, excess fluid should be removed by an authorized dealer . Note: An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. Do not use supplemental transmission fluid additives, treatments or cleaning agents.
W ASHER FLUID CHECK W ARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
W ARNING: Battery posts, terminals and related accessories contain lead and lead compounds. W ash hands after handling. Y our vehicle is equipped with a Motorcraft® maintenance-free battery which normally does not require additional water during its life of service.
If the battery has been disconnected or a new battery has been installed, the clock and the preset radio stations must be reset once the battery is reconnected. Note: Always dispose of automotive batteries in a responsible manner . Follow your local authorized standards for disposal.
CHANGING THE WIPER BLADES 1. Pull the wiper arm away from the vehicle. T urn the blade at an angle from the wiper arm. Press the lock tab to release the blade and pull the wiper blade down toward the windshield to remove it from the arm. 2. Attach the new wiper to the wiper arm and press it into place until a click is heard.
AIR FIL TER CHECK W ARNING: T o reduce the risk of vehicle damage and or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. Note: Failure to use the correct air filter element may result in severe engine damage.
6. Replace the air filter housing cover and secure the clamps. Be sure that the air cleaner cover tabs are engaged into the slots of the air cleaner housing. ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant.
For V ehicles with Halogen Headlamps: On the wall or screen you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp will need to be adjusted.
These are examples of acceptable condensation: • Presence of thin mist (no streaks, drip marks or droplets). • Fine mist covers less than 50% of the lens. These are examples of unacceptable moisture (usually caused by a lamp water leak): • W ater puddle inside the lamp.
Replacing HID headlamp bulbs (if equipped) The low beam headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your authorized dealer .
Replacing fog lamp bulbs 1. Make sure that the fog lamp switch is in the off position. 2. From underneath the vehicle, remove the splash shield and rotate the harness/bulb assembly counterclockwise, to remove from the fog lamp. 3. Carefully disconnect the bulb from the harness assembly via the two snap clips.
Replacing tail/stop/turn/side marker lamp bulbs Y our vehicle is equipped with a tail/stop/turn/sidemarker lamp assembly containing integral multiple light emitting diodes (LED).
BULB SPECIFICA TION CHART Replacement bulbs are specified in the chart below . Headlamp bulbs must be marked with an authorized “D.O.T .” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility .
GENERAL INFORMA TION Y our Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following p.
• Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’ s paintwork and trim over time.
W AXING Regular waxing is necessary to protect the paint on your car from the elements. W e recommend that you wash and wax the painted surface once or twice a year . When washing and waxing, park your vehicle in a shaded area out of direct sunlight. Always wash your vehicle before applying wax.
• Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage.
CLEANING THE INTERIOR W ARNING: Do not use cleaning solvents, bleach or dye on the vehicle’ s safety belts, as these actions may weaken the belt webbing. W ARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents.
Cleaning Black Label Interior (If Equipped) Note: Alcantara microfiber fabric is made of polyester microfiber with micro-porous polyurethane. Using commercially available fabric cleaners can cause permanent damage. Note: Do not use commercially available leather and vinyl cleaning products on Alcantara microfiber cloth fabric.
CLEANING THE INSTRUMENT P ANEL AND INSTRUMENT CLUSTER LENS W ARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces.
CLEANING LEA THER SEA TS (IF EQUIPPED) Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces. For routine cleaning, wipe the surface with a soft, damp cloth and a mild soap and water solution.
• T o remove tar and grease, use Motorcraft Bug and T ar Remover . • Never apply any cleaning chemical to hot or warm wheel rims or covers. • Some automatic car washes may cause damage to the finish on your wheel rims or covers.
• Lubricate hood latch, all door latches and trunk lid hinges with a light grade oil. • Cover interior trim to prevent fading. • Keep all rubber parts free from oil and solvents. Engine • The engine oil and filter should be changed prior to storage, as used engine oil contains contaminates that may cause engine damage.
Removing V ehicle from Storage When your vehicle is ready to come out of storage, do the following: • W ash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collected during storage (mice/squirrel nests).
GENERAL INFORMA TION Important Information for P265/40R22 Low-profile Tires and Wheels If your vehicle is equipped with P265/40R22 tires, they are low-profile tires.
W ARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. All occupants must wear seat belts. Children and infants must use appropriate restraints to minimize the risk of injury or ejection.
How Y our V ehicle Differs from Other Vehicles Crossover vehicles can differ from some other vehicles in a few noticeable ways. Y our vehicle may be: • Higher – to allow higher load carrying capacity . • Shorter – to give it the capability to approach inclines.
U.S. Department of T ransportation-T ire quality grades: The U.S. Department of T ransportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
Glossary of Tire T erminology • T ire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry .
INFORMA TION CONT AINED ON THE TIRE SIDEW ALL Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.
E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter . F. 95: Indicates the tire’ s load index. It is an index that relates to how much weight a tire can carry .
H. U.S. DOT T ire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
M. Maximum Inflation Pressure: Indicates the tire manufacturer’ s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire.
Information on T T ype Tires T type tires have some additional information beyond those of P type tires. These differences are described below . T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
INFLA TING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required.
on the Safety Compliance Certification Label (affixed to either the door hinge pillar , door -latch post, or the door edge that meets the door -latch post, next to the driver’ s seating position), or T ire Label which is located on the B-Pillar or the edge of the driver’ s door .
6. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. 7. Check the sidewalls to make sure there are no gouges, cuts or bulges.
Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional.
Tire Replacement Requirements W ARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus L T -metric or all-season versus all-terrain) as those originally provided by Ford.
W ARNING: T o reduce the risk of serious injury , when mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below . If the beads do not seat at the maximum pressure indicated, re-lubricate and try again.
Safety Practices W ARNING: If your vehicle is stuck in snow , mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. W ARNING: Do not spin the wheels at over 35 mph (56 km/h).
Tire Rotation Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation. Note: Y our vehicle may be equipped with a dissimilar spare tire and wheel assembly .
The tires on your vehicle have all-weather treads to provide traction in rain and snow . However , in some climates, you may need to use snow tires and chains. Follow these guidelines when using snow tires and cable chains: • If possible, avoid fully loading your vehicle.
Accordingly , when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under -inflated tire causes the tire to overheat and can lead to tire failure.
Changing Tires with a Tire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor located inside the tire and wheel assembly cavity . The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed.
When Y ou Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air .
Low tire pressure warning light Possible cause Customer action required Flashing warning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Y our T emporary Spare T ire is Installed in this section.
CHANGING A ROAD WHEEL W ARNING: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies.
2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONL Y When driving with one of the dissimilar spare tires listed above, do not: • exceed 50 mph (80 km/h).
• Ground clearance and parking at curbs • W inter weather driving capability • W et weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly , additional caution should be given to: • towing a trailer .
W ARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
9. The vehicle jacking points are shown here, and are depicted on the yellow warning label on the jack. Note: Jack at the specified locations to avoid damage to the vehicle. 10. Small arrow-shaped marks on the sills show the location of the jacking points.
Stowing the Flat/Spare Tire and Jack Note: If you are stowing a flat 22 inch tire and wheel assembly , temporarily remove the load floor , plastic stowage bins, and the foam load floor supports to make space. Place the 22 inch tire and wheel assembly in the spare tire well with the valve stem facing down.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as rotation, flat tire, wheel removal). Lug nut socket size/Bolt size Wheel lug nut torque* ft-lb N • m 1 ⁄ 2 x 20 100 135 * T orque specifications are for nut and bolt threads free of dirt and rust.
ENGINE SPECIFICA TIONS Engine 3.7L V6 engine Cubic inches 227 Required fuel Minimum 87 octane Firing order 1–4–2–5–3–6 Ignition system Coil on plug Compression ratio 10.5:1 Spark plug gap 0.049–0.053 inch (1.25–1.35 mm) Engine drivebelt routing 1.
TECHNICAL SPECIFICA TIONS Item Capacity Ford part name Ford part number / Ford specification Brake fluid 1 Between MIN and MAX on reservoir Motorcraft High Performance DOT 4 Low Viscosity Motor V ehic.
Item Capacity Ford part name Ford part number / Ford specification Power steering fluid Between MIN and MAX on reservoir Motorcraft MERCON L V XT -10-QL VC (U.S.); CXT -10-L V12 (Canada) / MERCON L V Automatic transmission fluid 7,8 11.0 quarts (10.4L) (6F50) Motorcraft MERCON L V XT -10-QL VC (U.
Item Capacity Ford part name Ford part number / Ford specification Air conditioning refrigerant 10 1.27 lb (0.58kg) Motorcraft R-134a Refrigerant YN-19 (U.
Item Capacity Ford part name Ford part number / Ford specification 7 Indicates only approximate dry-fill capacity . Some applications may vary based on cooler size and if equipped with an in-tank cooler . The amount of transmission fluid and fluid level should be set by the indication on the dipstick’ s normal operating range.
Motorcraft part numbers Component 3.7L V6 engine Air filter element F A-1884 Battery BXT -65-650 Oil filter FL-500-S Spark plugs SP-520 Cabin air filter FP65 Seat air filter FS-104 W indshield wiper b.
VEHICLE IDENTIFICA TION NUMBER The vehicle identification number is located on the driver’ s side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number . The V ehicle Identification Number (VIN) contains the following information: A.
VEHICLE CERTIFICA TION LABEL The National Highway T raffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located.
ACCESSORIES For a complete listing of the accessories that are available for your vehicle, please contact an authorized dealer or visit our online store at: www .
• Cargo area protector • Bumper protector • Wheel locks • Hitch-mounted parking sensors* • Car cover* *The accessory manufacturer designs, develops and therefore warrants Lincoln Licensed Accessories, and does not design or test these accessories to Lincoln Motor Company engineering requirements.
Extended Service Plan (ESP) PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REP AIRS WITH A LINCOLN EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. Only) Lincoln owners have discovered the powerful protection of Lincoln Extended Service Plan.
Roadside Assistance Exclusive 24/7 roadside assistance, including: • T owing, flat-tire change and battery jump starts. • Out of fuel and lock-out assistance. • T ravel expense reimbursement for lodging, meals and rental car . • Destination assistance for taxi, shuttle, rental car coverage and emergency transportation.
SERVICE PLANS (CANADA ONL Y) Y ou can get more protection for your vehicle by purchasing a Lincoln Extended Service Plan. Lincoln Extended Service Plan is the only service contract backed by Lincoln Motor Company of Canada, Limited.
GENERAL INFORMA TION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and T elecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.
MP3 T rack and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode.
AM/FM/CD PREMIUM AUDIO SYSTEM W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
D. TUNE + and TUNE - : • In radio mode, press these buttons to manually search through the radio frequency band. • In Sirius mode, press these buttons to find the next or previous available satellite radio station.
GENERAL INFORMA TION W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
This system uses a four -corner strategy to provide quick access several vehicle features and settings. The touchscreen provides easy interaction with your cellular phone, multimedia, climate control and navigation system. The corners display any active modes within those menus, such as phone status or the climate temperature.
SETTINGS Press to select any of the following: • Clock • Display • Sound • V ehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’ s option package and software, your screens may vary in appearance from the descriptions in this section.
Using the T ouch-sensitive Controls on Y our System T o turn a feature on and off, just touch the graphic with your finger . T o get the best performance from the touch-sensitive controls, keep in mind: • Do not press hard on the controls. They are sensitive to light touch.
Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday , 8:30am-9:00pm EST . Sunday , 10:30am-7:30pm EST . In the United States, call: 1–800–392–3673. In Canada, call: 1–800–565–3673.
Speed-restricted Features Some features of this system may be too difficult to use while your vehicle is moving so they are restricted from use unless your vehicle is stationary . • Screens that are too crowded with information, such as Point of Interest reviews and ratings, Sirius T ravel Link sports scores, movie times and ski conditions.
Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently .
ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMA TION DISPLA Y The display is located on the right side of your instrument cluster . Y ou can use your steering wheel controls to view and make minor adjustments to active modes without taking your hands off the wheel.
Audio Sources and Memory Presets Use the OK and arrow buttons on the right side of your steering wheel to scroll through the available modes. Y ou can make selections from the menu by using the OK button. The selection menu expands and different options appear .
How to Use V oice Commands with Y our System Press the voice icon. After the tone, speak your command clearly . These commands can be said at any time.
Accessing a List of Available Commands • If you use the touchscreen, press the Settings icon > Help > V oice Command List. • If you use the steering wheel control, press the voice icon.
V oice Settings V oice settings allow you to customize the level of system interaction, help and feedback. The system defaults to standard interaction that uses candidate lists and confirmation prompts as these provide the highest level of guidance and feedback.
Using V oice Commands with the T ouchscreen Options Y our voice system has a dual mode feature which allows you to switch between using voice commands and making on-screen selections. This is available only when the system displays a list of candidates generated during a voice session.
Browsing Device Content When listening to audio on a device, you can browse through other devices without having to change sources. For example, if you are currently listening to audio on an SD card, you can browse all the artists that are stored on your USB device.
Y our voice system allows you to change audio sources with a simple voice command. For example, if you are listening to music on a USB device, then want to switch to a satellite radio channel, simply press the voice button on the steering wheel controls and say the name of the Sirius station (such as, “the Highway”).
Scan T ouch this button to go to the next strong AM or FM radio station. The light on the button illuminates when the feature is on. Options Sound Settings allows you to adjust settings for: • Bass • Midrange • T reble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated V olume.
more information, and a guide to available stations and programming, please visit www .hdradio.com. When HD Radio is on and you tune to a station broadcasting HD Radio technology , you may notice the following indicators on your screen: HD) logo is grey when acquiring a digital station, and then changes to orange when digital audio is playing.
HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Potential station issues Issue Cause Action Sound fading or blending in and out. The radio is shifting between analog and digital audio. No action required. The reception issue may clear up as you continue to drive. There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct T une.
Radio V oice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the channel. Sound returns when finished.
Parental Lockout allows you to lock and unlock channels, change or reset your PIN or unlock all channels. T o use this feature, you need your initial PIN, which is 1234. Artist/T itle/T eam Alerts allows you to select Artists, Titles and T eams that you would like the system to alert you to when they are playing on other channels.
If you are not listening to Sirius satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
Sirius Satellite Radio Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Sirius troubleshooting tips Radio display Condition Possible action Acquiring... Radio requires more than two seconds to produce audio for the selected channel. No action required. This message should disappear shortly . Sat Fault/SIRIUS system failure.
CD Press the lower left corner of the touchscreen, and then select the CD tab. Y ou can also advance and reverse the current track or current folder , if applicable. Repeat T ouch this button to repeat the currently playing track, all tracks on the disc or turn the feature off if already on.
CD V oice Commands If you are listening to a CD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a CD, press the voice button and, after the tone, say “CD”, then any of the commands in the following chart.
USB Port The ports are located either in the center console or behind a small access door in the instrument panel. T o access and play music from your device, press the lower left corner of the touchscreen, and then select the USB tab.
• Device Information displays software and firmware information about the currently connected media device. • Update Media Index indexes your device each time you connect it to make sure you have the latest voice commands available for all media on the device.
“USB” or “SD CARD” “Play next song” “Shuffle off” “Play playlist <name>” “What’ s this?” “Play podcast <name>” “Help” “Play podcast episode <name>” * If you have said you would like to browse your USB or SD card, the system prompts you to specify what you would like to browse.
Supported Media Players, Formats and Metadata Information SYNC is capable of hosting nearly any digital media player , including iPod®, Zune™, plays from device players, and most USB drives. Supported audio formats include MP3, WMA, W A V and AAC. It is also able to organize your indexed media from your playing device by metadata tags.
A/V Inputs W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
T o use the auxiliary input jack feature, make sure that your portable music player is designed for use with headphones and that it is fully charged. Y ou also need an audio extension cable with stereo male 1/8th-inch (3.5 millimeter) connectors at one end and a RCA jack at the other .
PHONE A. Phone B. Quick Dial C. Phonebook D. History E. Messaging F . Settings Hands-free calling is one of the main features of SYNC. Once you pair your phone, you can access many options using the touchscreen or voice commands. While the system supports a variety of features, many are dependent on your cellular phone’ s functionality .
Pairing Y our Phone for the First Time W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
4. When prompted on your phone’ s display , confirm that the PIN provided by SYNC matches the PIN displayed on your cellular phone. 5. The display indicates when the pairing is successful. SYNC may prompt you with more phone options. For more information on your phone’ s capability , see your phone’ s user guide and visit the website.
Phonebook T ouch this button to access and call any contacts in your previously downloaded phone book. The system places the entries in alphabetical categories summarized at the top of the screen.
Composing a T ext Message Note: This is a speed-dependent feature. It is unavailable when your vehicle is traveling at speeds over 3 mph (5 km/h). Note: Downloading and sending text messages using Bluetooth are phone-dependent features. 1. T ouch the top left corner of the display to access the Phone menu.
• Dial to call the contact. • Ignore to exit the screen. Note: If you select Vi e w and your vehicle is traveling over 3 mph (5 km/h), the system offers to read the message to you instead of allowing you to view it while driving. Phone Settings Press Phone > Settings.
Roaming Warning T ouch this button to have the system alert you when your phone is in roaming mode. Phone V oice Commands Press the voice button on the steering wheel control.
INFORMA TION If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A.
Note: This feature does not function properly if you have enabled caller ID blocking on your mobile phone. Make sure your mobile phone is not blocking caller ID before using SYNC Services.
Connecting to SYNC Services Using the T ouchscreen If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab.
If you miss a turn, SYNC automatically asks if you want the route updated. Just say , “Y es” when prompted and the system delivers a new route to your vehicle. If your vehicle is equipped with Navigation, SYNC Services downloads your requested destination to the navigation system.
“SER VICES” “Navigation voice on” “Next turn” “Route status” “Route summary” “Services” “Update route” “Help” Sirius T ravel Link (If Equipped and If Activated) W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury .
Traf fic On Route and Traf fic Nearby T ouch these buttons to identify traffic incidents on your route, nearby your vehicle’ s current location or near any of your favorite places, if programmed. Fuel Prices T ouch this button to view fuel prices at stations close to your vehicle’ s location or on an active navigation route.
T ravel Link voice commands “Sports headlines” * “W eather” “Sports schedule” * “W eather map” * If you have said, “Sports headlines”, “Sports schedule” or “Sports scores”,.
Alerts If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Alerts, and then choose from any of the following services: • Vi e w the message.
Note: Before setting this feature on, make sure that you read the 911 Assist privacy notice later in this section for important information. Note: If any user turns 911 Assist on or off, that setting applies for all paired phones.
• The vehicle must have battery power and be located in the United States, Canada or in a territory in which 911 is the emergency number . In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would trigger 911 Assist); however , SYNC tries to contact emergency services if 911 Assist triggers.
V ehicle Health Report (If Equipped, United States Only) W ARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. V ehicle Health Report supplements, but cannot replace, normal maintenance and vehicle inspection.
Making a Report If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. If you want to run a report by using the touchscreen, touch Apps > V ehicle Health Report.
SETTINGS A. Clock B. Display C. Sound D. V ehicle E. Settings F . Help Under this menu, you can set your clock, access and adjust the display , sound and vehicle settings as well as access settings for specific modes or the help feature. Clock Note: Y ou cannot manually set the date.
From this screen, you can also make other adjustments, such as 12– or 24–hour mode, activate GPS time synchronization and have the system automatically update for new time zones. Y ou can also turn the outside air temperature display on and off. It appears at the top center of the touchscreen, next to the time and date.
Only the photograph(s), which meets the following conditions, display: • Compatible file formats are as follows: .jpg, .gif, .png, .bmp. • Each file must be 1.
Door Keypad Code T o change the keypad code for your keyless entry keypad system: 1. Press the Settings icon > V ehicle > Door Keypad Code. 2. Enter your current factory code, then, when prompted, enter your new code. Rear V iew Camera This menu allows you to access settings for your rear view camera.
System T ouch Screen Button Beep Select to have the system beep to confirm choices made through the touchscreen. T ouch Panel Button Beep Select to have the system beep to confirm button choices made through the climate or audio system. Keyboard Layout Have the touchscreen keyboard display in QWERTY or ABC format.
Media Player Press the Settings icon > Settings > Media Player , then select from the following: Media player Autoplay When this feature is on, the system automatically switches to the media source upon initial connection. This allows you to listen to music during the indexing process.
Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences T urn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. T urn the Parking POI notification on and off.
Navigation T raffic Preferences Have the system display areas where roadwork occurs. Have the system display incident icons. Have the system display areas where difficult driving conditions may occur . Have the system display areas where snow and ice on the road may occur .
Phone Settings Press the Settings icon > Settings > Phone, then select from the following: Phone Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth T urn Bluetooth on and off. Do Not Disturb Have all calls go directly to your voice mail and not ring inside your vehicle.
Wireless & Internet Y our system has a Wi-Fi feature that creates a wireless network within your vehicle, thereby allowing other devices (such as personal computers or phones) in your vehicle to speak to each other , share files or play games.
W ireless & Internet USB Mobile Broadband Instead of using W i-Fi, your system can also use a USB mobile broadband connection to access the internet. (Y ou must turn on your mobile broadband device on your personal computer before connecting it to the system.
Help Press the Settings icon > Help, then select from the following: Help Where Am I? V iew your vehicle’ s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing displays. System Information T ouchscreen system serial number .
CLIMA TE Press the lower right corner on the touchscreen to access your climate control features. Depending on your vehicle line and option package, your climate screen may look different from the screen shown here. A. Power: T ouch to switch the system off and on.
F. A/C: T ouch to turn the air conditioning on or off. • Use with recirculated air to improve cooling performance and efficiency . • Engages automatically in MAX A/C, defrost and floor/defrost. G. AUTO: T ouch to engage automatic operation, then set the temperature using the temperature control.
Climate Control V oice Commands The following voice commands are available at the main menu level of a voice session. For example, press the voice button and after the prompt, “Say a command”; say.
Additional climate control voice commands “On” “Help” “Panel floor on” * If you have said “T emperature”, you can say any of the commands in the following “T emperature” chart. “TEMPERA TURE” “High” “Low” “<15.5–29.
Setting a Destination Press the green corner of your touchscreen, then Dest when it appears. Choose any of the following: Destination selections My Home Street Address Favorites Intersection Previous Destinations City Center Point of Interest Map Emergency Edit Route Cancel Route 1.
Point of Interest (POI) Categories Y our system offers a variety of points of interest categories. Main categories Food/Drink & Dining Automotive T ravel & T ransportation Shopping Financial E.
cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 912 cities (881 in the United States, 20 in Canada and 11 in Mexico). cityseekr , when available, is a service that provides more information about certain points of interest such as restaurants, hotels and attractions.
This icon appears when your selection exists in multiple categories within the system. When you are viewing more information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons.
Route Preferences Preferred Route allows you to choose to have the system display the Shortest, Fastest or most Ecological route first. If you set Always Use Preferred Route to Ye s , the system uses the selected route type to calculate only one route to the desired destination.
Avoid Areas A void Areas allows you to choose areas which you want the system to avoid when calculating a route for you. Press Add to program an entry . Once you make a selection, the system tries to avoid the area(s) if possible for all routes. T o delete a selection, choose the listing on the screen.
3D map mode provides an elevated perspective of the map. This viewing angle can be adjusted and the map can be rotated 180 degrees by touching the map twice, and then dragging your finger along the shaded bar with arrows at the bottom of the map. Vi e w switches between full map, street list and exit view in route guidance.
Map Icons V ehicle mark shows the current location of your vehicle. It stays in the center of the map display , except when in scroll mode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen. The map position closest to the cursor is in a window on the top center part of the screen.
Quick-touch Buttons When in map mode, touch anywhere on the map display to access more features. Set as Dest T ouch this button to select a scrolled location on the map as your destination. Y ou may scroll the map by pressing your index finger on the map display .
Navigation V oice Commands When in navigation mode, press the voice button on the steering wheel control. After the tone, say any of the following commands: Navigation system voice commands “Cancel .
“DESTINA TION” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NA VIGA .
GENERAL INFORMA TION SYNC® End User License Agreement (EULA) • Y ou have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMP ANY from an affiliate of Microsoft Corporation (“MS”).
DESCRIPTION OF OTHER RIGHTS AND LIMIT A TIONS: • Speech Recognition: If the SOFTW ARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process.
SOFTW ARE’ s ability to use WMDRM to play or copy protected content. This action does not affect unprotected content. When your DEVICE downloads licenses for protected content, you agree that Microsoft may include a revocation list with the licenses.
provided, then the terms of this EULA shall apply , except that the MS, Microsoft Corporation or affiliate entity providing the Supplemental Component(s) shall be the licensor of the Supplemental Component(s).
property rights in and to the content which may be accessed through use of the SOFTW ARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content.
End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to Manufacturer FORD MOTOR COMP ANY by an affiliate of Microsoft Corporation pursuant to a license agreement.
Prolonged V iews of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.
Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to route you to emergency services.
you in an unsafe situation, or directs you into an area that you consider to be unsafe, do not follow such instructions; (c) do not input destinations, or otherwise manipulate the T elenav Software, u.
or privacy or other rights of any party , (ii) violates any law , statute, ordinance or regulation, including but not limited to laws and regulations related to spamming, privacy , consumer and child .
EVEN IF TELENA V HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHST ANDING ANY DAMAGES THA T YOU MIGHT INCUR FOR ANY REASON WHA TSOEVER (INCLUDING, WITHOUT LIMIT A TION, ALL DAMAGES REFERE.
this Agreement to any other party at any time without notice, provided the assignee remains bound by this Agreement. 8. Miscellaneous 8.1 This Agreement constitutes the entire agreement between T elenav and you with respect to the subject matter hereof.
comply with the following additional terms and conditions, which are applicable to T elenav’ s third party vendor licensors: End User License Agreement For Distribution By HERE For North America/AP AC END USER TERMS The content provided (“Data”) is licensed, not sold.
in the exact same form as you purchased it by physically transferring the original media (e.g., the CD-ROM or DVD you purchased), all original packaging, all Manuals and other documentation. Specifically , Multi-disc sets may only be transferred or sold as a complete set as provided to you and not as a subset thereof.
OR SA VINGS, OR ANY OTHER DIRECT , INDIRECT , INCIDENT AL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS DA T A, ANY DEFECT IN THIS DA T A, OR THE BREACH OF THES.
government, this Data is a “commercial item” as that term is defined at 48 C.F .R. (“F AR”) 2.101, is licensed in accordance with this End[not ] User License Agreement, and each copy of Data d.
information, including name, artist, track, and title information (“Gracenote Data”) from online servers (“Gracenote Servers”), and to perform other functions. Y ou may use Gracenote Data only by means of the intended End User functions of this device This device may contain content belonging to Gracenote’ s providers.
GRACENOTE CONTENT . GRACENOTE COLLECTIVEL Y AND SEP ARA TEL Y RESERVE THE RIGHT TO DELETE DA T A AND/OR CONTENT FROM THE COMP ANIES’ RESPECTIVE SERVERS OR, IN THE CASE OF GRACENOTE, CHANGE DA T A CA TEGORIES FOR ANY CAUSE THA T GRACENOTE DEEMS SUFFICIENT .
GENERAL MAINTENANCE INFORMA TION Why Maintain Y our V ehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it.
Protecting Y our Investment Maintenance is an investment that will pay dividends in the form of improved reliability , durability and resale value. T o maintain the proper performance of your vehicle and its emission control systems, it is imperative that scheduled maintenance be completed at the designated intervals.
Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed.
Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly . This can help identify potential issues and prevent major problems.
Scheduled Maintenance 433 2014 MKX (mkx) Owners Guide gf, 1st Printing, June 2014 USA (fus) I n f o r m a t i o n P r o v i d e d b y :.
NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® Y our vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used.
Normal scheduled maintenance * At every oil change interval as indicated by the information display Change engine oil and filter . ** Rotate tires, inspect tire wear and measure tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
Other maintenance items 1 Every 20000 miles (32000 km) Replace cabin air filter , or clean screen. Inspect spark plugs. Every 30000 miles (48000 km) Replace engine air filter . Every 40000 miles (64000 km) Change spark plugs. Every 100000 miles (160000 km) Change engine coolant.
Maintenance Schedule Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A .
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
SPECIAL OPERA TING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance.
Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery , taxi, patrol car or livery) As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Special Operating Condition Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
EXCEPTIONS There are several exceptions to the Normal Schedule. They are listed below: Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks e.
ENGINE COOLANT CHANGE RECORD Initial change Six years or 100000 miles (160000 km) (whichever comes first) After initial change Every three years or 50000 miles (80000 km) Engine Coolant Change Log D E.
911 Assist™ .............................. 379 A ABS (see Brakes) ..................... 173 Accessing and using your USB port ............................................ 358 Accessing your calendar ..........379 Accessory delay ....................
C Capacities for refilling fluids .... 316 Cargo management system ...... 204 Cargo net ................................... 203 CD .............................................. 330 CD player .......................... 328, 357 CD voice commands .....
Emergency brake (see Parking brake) .................. 173 Emission control system ..........156 End user license agreement .... 411 Engine ........................................ 315 cleaning ................................... 276 coolant .........
Information displays .................106 Inspection/maintenance (I/M) testing ........................................ 158 Instrument panel cleaning ................................... 280 cluster ...................................... 100 Intelligent Access Key .
P Pairing other phones ................ 366 Pairing your phone ................... 366 Pairing your phone for the first time .................................... 366 Parental MyKey programming ... 62 Parking brake ............................ 173 Parts (see Motorcraft® parts) .
for adults ............................. 34, 36 for children ...............................19 Occupant Classification Sensor ........................................ 47 safety belt maintenance ...........41 seat belt maintenance .............. 41 warning light and chime .
T T emperature control (see Climate control) ....... 121, 396 T ext messaging ......................... 368 T ilt steering wheel ................ 79–80 T ires ........................... 287–288, 308 alignment ................................ 301 care .
デバイスLincoln MKX (2015)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lincoln MKX (2015)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLincoln MKX (2015)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lincoln MKX (2015)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lincoln MKX (2015)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lincoln MKX (2015)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLincoln MKX (2015)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lincoln MKX (2015)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLincoln MKX (2015)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
