Link electronicメーカーDoor phoneの使用説明書/サービス説明書
ページ先へ移動 of 18
Doorphone Link Slim Door Phone User Guide for Link Slim Door phone.
2 Contents 1 BASIC DESCRI PTION ............................................................................... 3 1.1 F EATURES ............................................................................................ 3 1.2 S LIM D OOR P HONE MODELS .
3 1. Basic description 1.1 Features ¾ Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variant s. ¾ Voice communication powered fro m analogue telephone line only.
4 2.1.2 Uncover control elements 4. Push the aluminium speaker grille down (see figure – 4). 2.1.3 Wiring and wall mounting 5. Use the wall mounting template at the en d of the manual to mark the position for the screw holes and cable connection on the mounting surface.
5 2.1.4 Switches 7. The switch number 1 (see figure – 8) activates heating of the PCB. This is for increased resistance a gainst humidity. To use this feature you must connect an external 12 V power supply. 8. The switch number 2 (see figure – 9) i s required for programmin g the unit when the password is forgo tten.
6 2.2 Location of ID Doorphone components All mounting, control and setting elements are lo cated under the sp eaker front aluminium grille. . PC connector SlimDoorPhone fixing screw hole Service swit.
7 2.3 Changing name cards Name card panel (0on pa ge 3) has spaces to insert printed name card s. Insert name cards from top (see picture). Cards can easily be printed with pictures as well as text using the includ ed software . The card ou tline is marked for easy cutting .
8 3 SlimDoorPhone Services 3.1 Signalling Overview The unit signals acoustic conditions that may occur during ope ration. You can listen to the signalling samples in the ID Manager program.
9 dialled to close the relay ( p arameter 35 ), releasi ng the lock. Hanging up the telephon e will end the call, as will the busy tone from the PBX. 3.
10 4.2 Programming from a PC – ID Manager program To setup the unit from a PC you will require a special USB tool cable, available se parately, and must first install the USB driver and ID Manager software. Refer to the CD for more details. The unit must also be connected to the telephone line.
11 nn – telephone number up to 16 digits to be store d. Refer to the table for other choices. The number stored in parameter 2 is the numbe r for the second group or the number for Night mode Note: The switchover to Day/Night mode remains set in the unit even after line disconnection.
12 5.3 Basic parameters Parameter Value Description Default Exam.1 Exam.2 41 v Dialling type 0 0 0 v – dial type v=0 is DTMF tone dial, v=1 is pulse dial Parameter Value Description Default Exam.1 Exam.2 42 z Prolong call ∗ ∗ ∗ z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone.
13 d – maximum time in minutes for whi ch a call may last. This time can be extende d during a call by dialling Prolong Call digit from telephone ( ∗ or #). Time setting is per table. Parameter Value Description Default Exam.1 Exam.2 53 w time between button presses 2 2 2 w – max.
14 – p time is simultaneously the duration of interdigit gap at pulse dialling. 5.5 Presetting and Deleting Parameter Value Description Default Exam.
15 z=3 – all tones are active – ( default) It is possible to generate an audible sig nal (only in mode m=1) to alert visitors that the door is unlocked so that they can enter. This is especially useful when using a DC power so urce, as lock release may be silent.
16 50 p Pause duration (ms) 8 (800ms) 8 (800ms) 8 (800ms) 6# s Number of fitted buttons on basic module 6* t Delay of line connectio n (Siemens PBX) 1 1 1 6 z Acoustic signalling 3 and 9 3 and 9 3 and 9 8# # Default setting executes 8# 1 Setting per exam.
17 7 Table for easy programming Complete the values you want to program in the empty part of table on the next page. All programming commands are located in the double-f ramed area, to simplify programming. Retain a copy for future reference. Use Programming sequence Description Detail par.
18 8 Drilling master board.
デバイスLink electronic Door phoneの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Link electronic Door phoneをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLink electronic Door phoneの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Link electronic Door phoneの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Link electronic Door phoneで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Link electronic Door phoneを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLink electronic Door phoneの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Link electronic Door phoneに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLink electronic Door phoneデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。