LinksysメーカーBEFDSR41Wの使用説明書/サービス説明書
ページ先へ移動 of 46
Instant Broadband™ Series ADSL Gateway Modem / Router / 4-Por t Switch / Wireless-Ready Use this guide to install the following product: BEFDSR41W User Guide.
COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. Instant Broadband is a trademark of Linksys. Microsoft, Windows, and the Windows logo ar e registered trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors.
• Reorient or relocate the r eceiving antenna. • Increase the separation between the equipment and the r eceiver . • Connect the equipment to an outlet on a circuit dif ferent fr om that to which the receiv- er is connected. • Consult a dealer or an experienced radio/TV technician for assistance.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Filtering 47 F orw arding 49 Dynamic Routing 51 Static Routing 53 DMZ Host 55 Fire w all 56 Link T est 57 Appendix A: T roubleshootin.
Instant Broadband ™ Series ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Ready Chapter 1: Introduction Thank you for choosing the Instant Broadband™ ADSL Gatew ay with Modem / Router / 4- P ort Switch / W ireless-Ready . This Gate wa y allo ws y ou to set up a netw ork with your PCs and share your Internet connection.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 3 Think of the Gatew a y as a netw ork de vice with tw o sides: the f irst side is made up of your pri v ate Local Area Netw or k (LAN) of PCs. The other , pub lic side is the Internet, or the Wide Area Netw or k (W AN) , outside of your home or of f ice.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y This user guide co vers the basic steps for setting up a netw ork with a Gate w a y .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 7 Instant Broadband ™ Series 6 Pow e r Green . The Powe r LED lights up when the Gate wa y is po w- ered on. Diag Gr een . The Diag LED flashes when the Gatew a y is booting up. If this flashes or sta ys solid after the bootup phase, the Gate wa y ma y be malfunctioning.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 9 Instant Broadband ™ Series 8 Chapter 3: Connecting the Gateway Y ou will connect the Gatew a y to your ADSL line and to the computers in your home or business.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 11 Instant Broadband ™ Series 10 4. Connect the po w er adapter to the Gatew a y . Plug the po w er adapter into the electrical outlet. 5. T urn on the Gatew a y . Then, turn on the f irst PC that you w ant to use to con- f igure the Gatew a y .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 1. Go to the Netw ork screen b y clicking the Start button. Click Settings and then Contr ol P anel . From there, doub le-click the Networ k icon. 2. On the Conf iguration tab, select the TCP/IP line for the applicable Ethernet adapter .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 1. Go to the Netw ork screen b y clicking the Start button. Click Settings and then Control P anel .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y The follo wing instructions assume you are running W indo ws XP with the default interface. If you are using the Classic interface (where the icons and menus look like pre vious W indo ws v ersions), please follo w the instructions for W indo ws 2000.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Chapter 5: Configuring the Gateway In this chapter , you will conf igure the Linksys ADSL Gate wa y to be ab le to gain access to the Internet through your Internet Ser vice Pro vider (ISP).
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 21 Instant Broadband ™ Series 20 4. The Gatew a y supports f iv e modes of Encapsulation: RFC 1483 Bridged , RFC 1483 Routed , RFC2364 PPP oA, RFC2516 PPP oE, and Bridged Mode Only .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 23 Instant Broadband ™ Series Static IP Address If your ISP sa ys that y ou are connecting through a static or f ix ed IP address from your ISP , follo w these steps: 1. Select Static IP Address as the W AN IP Address.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Chapter 6: Using the Gateway’s Web-based Utilit y F or y our con venience, an administrati ve utility has been pro g rammed into the Gatew a y w here all Gatew a y-based administrativ e tasks are performed.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y • Encapsulation The Gatew a y supports f iv e encapsulation modes: RFC 1483 Bridged , RFC 1483 Routed , RFC 2364 PPP oA , RFC2516 PPP oE , and Bridged Mode Onl y . These modes can be selected from the drop-do wn menu next to the Encapsulation setting.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Static IP Address Choose this option if your ISP pro vided y ou with the fol- lo wing information: IP Address, Def ault Gate wa y Address, and DNS Ser ver Address(es). 1. Enter the IP addr ess pro vided b y the ISP in the Specify an IP Address f ield.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 31 Instant Broadband ™ Series 30 RFC 2364 PPP oA Choose this option if your ISP told y ou to use this mode of encapsulation. Use the User Name and Pass w ord pro vided b y your ISP .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 33 Instant Broadband ™ Series 32 Bridged Mode Onl y Choose this option if your ISP told y ou to use this mode of encapsulation. This mode is used to conf igure the Gate w a y as an RFC1483 bridge, w hen the Gatew a y’ s routing and N A T capabilities need to be disabled.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 35 Instant Broadband ™ Series 34 • SNMP T r ap Community Enter the passw ord sent with each trap to the SNMP manager . • SNMP T r ap Destination Enter the IP address of the station that receives the SNMP traps sent by the Gate w a y .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y • Do wnstr eam Speed This indicates the maximum speed at w hich the ADSL Gatew a y will recei ve data. • Login This indicates the status of the PPP oA or PPP oE lo gin (if applica- ble).
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y • Number of DHCP Users Enter the maximum number of PCs that you w ant the DHCP server to assign IP addresses to. This number cannot be greater than 253. • DHCP Clients T ab le Click the DHCP Clients T able button to show the cur rent DHCP Client data.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 41 Instant Broadband ™ Series The Lo g tab pro vides you with a lo g of all incoming and outgoing URLs or IP addresses for your Internet connection. • Access Log T o log incoming and outgoing traf f ic, select the Enable option next to Access Log.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y T o upg rade the Gatew a y’ s f irmware: 1. Select the Help tab (see Figure 6-16).
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y On the WEP K ey Setting screen, y ou can make the follo wing choices: • Select 64- or 128-bit WEP encr yption. • Select Passphrase generation for easy setup of encryption f ields. • Conf igure the manual entry of WEP encryption keys.
Instant Broadband ™ Series 46 The follo wing instructions are for advanced users or users w hose setup needs require special conf iguration. When you click the Advanced tab, you will be able to set up these features. There are seven additional tabs a v ailable.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 49 Instant Broadband ™ Series 48 P ort Range F orwarding sets up pub lic services on your netw ork, such as w eb servers, ftp servers, e-mail ser vers, or other specialized Internet applications.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 51 Instant Broadband ™ Series 50 W ith Dynamic Routing you can enab le the Gate wa y to automaticall y adjust to ph ysical changes in the netw ork’ s lay out.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 53 Instant Broadband ™ Series RIP V ersion Select the version of IP y ou want to use. • RIP-1 Routing data will be sent in RIPv1 format. • RIP-2B Routing data will be sent in RIPv2 for mat using subnet broadcast- ing.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 55 Instant Broadband ™ Series 54 The DMZ Hosting function allo ws for a server attached to P ort 4 of the Gatew a y to be full y accessible from the Internet.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y The Link T est page allo ws an advanced user or technician to perform advanced diagnostics of the ADSL Gate w ay and perform connecti vity tests. The information pro vided by these tests is not discussed in this document.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Make sure that y ou do NO T ha ve a microf ilter plugged in betw een the Gate wa y and the w all jack. V erify that your ADSL account is active with your ISP . 5. I can’t browse through the Gatew ay .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 61 Instant Broadband ™ Series 60 I set up an Unreal T ournament Ser ver , but others on the LAN cannot join.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y What are the Gateway’ s adv anced features? The Gatew a y’ s advanced features include Filters, F orwarding, Dynamic Routing, Static Routing, and DMZ host. Does Linksys provide syslog support? No, Linksys does not currently pro vide syslo g suppor t.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 65 Instant Broadband ™ Series 64 1. At the W ireless Screen, if you choose to enab le WEP Encryption, select Mandatory under the WEP section. 2. Press the WEP K ey Setting button to set the WEP Encryption type and lev el.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y WEP Encryption key can be generated in one of tw o w a ys: 1. Y ou may create an encryption key b y using a P assphrase. a. Enter a Passphrase, a user-def ined passw ord , into the P assphrase f ield.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 2. In the “Control Panel” windo w , click the Networ k and Internet Connections icon. 3. Click on the Netw ork Connections icon. 4. The “Netw ork Connections” windo w will appear .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 71 Instant Broadband ™ Series 70 6. When the “W ireless Netw ork Connection Properties” window appears, click the Wir eless Netw orks Ta b .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Appendix C: Installing the T C P / I P Protocol F ollo w these instructions to install the TCP/IP protocol on one of your PCs onl y after a netw ork card has been successfull y installed inside the PC.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Appendix D: Finding the MAC Address and IP Address for Y o u r Ethernet Adapter This section describes ho w to f ind the MA C address for your Ethernet adapter to do either MA C Filtering for the Gate w a y and ISP .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 2. In the command prompt, enter ipconf ig /all . Then press the Enter key . 3. Write do wn the Ph ysical Address as sho wn on your computer screen; it is the MA C address for your Ethernet adapter .
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y 79 Instant Broadband ™ Series When entering the information using the Router’ s w eb-based utility , you will type the 12-digit MA C ad dress in this for mat, XXXXXXXXXXXX without the hyphens for MA C Filtering.
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Read y Appendix F: Warrant y Information BE SURE T O HA VE Y OUR PR OOF OF PURCHASE AND A BARCODE FR OM THE PR ODUCT’S P A CKA GING ON HAND WHEN CALLING. RETURN REQUESTS CANNO T BE PR OCESSED WITHOUT PR OOF OF PURCHASE.
© Copyright 2002 Linksys, All Rights Reserved. www .linksys.com Appendix G: Contact Information F or help with the installation or operation of y our ADSL Gatew a y with Modem / Router / 4-P ort Switch / W ireless-Ready , contact Linksys T echnical Support at one of the phone numbers or Internet addresses below .
デバイスLinksys BEFDSR41Wの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Linksys BEFDSR41Wをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLinksys BEFDSR41Wの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Linksys BEFDSR41Wの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Linksys BEFDSR41Wで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Linksys BEFDSR41Wを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLinksys BEFDSR41Wの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Linksys BEFDSR41Wに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLinksys BEFDSR41Wデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。