LinksysメーカーPCM200HAの使用説明書/サービス説明書
ページ先へ移動 of 20
HomeLink ® Series Phoneline 10M Integrated PC Card User Guide Use this User Guide to Install the PCM200HA.
COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. HomeLink is a register ed trademark of Linksys. Microsoft, Windows, and the Windows logo ar e register ed trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors.
Linksys HomeLink Series Phoneline 10M Integrated PC Card Introduction The Linksys Phoneline 10M Integrated PC Card Congratulations on your purchase of the Linksys HomeLink Phoneline 10M Integrated PC Card.
Phoneline 10M Integrated PC Card Getting to Know the Phoneline 10M Integrated PC Card LEDs Link The green LED will remain lit when the Phoneline 10M Integrated PC Card is connected. Rx The Receiv e LED will blink green when data is being receiv ed across the the phone cable.
Connecting to a Phoneline Network Computers on a HomeLink netw ork can be connected in one of two w ays. They can be daisy chained through their HomeLink port to another HomeLink PC in a string, or they can be connected directl y to a phone jack. The diagram below sho ws a HomeLink phoneline netw ork that uses both types of connections.
Phoneline 10M Integrated PC Card 4. Select Sear ch f or the best driv er for y our de vice (Recommended). Click Next. 5. Select "CD-R OM drive". Click Ne xt to continue. 6. A windo w will open saying that Windo ws is no w ready to install the Linksys Phoneline 10M Integrated PC Card driv er (seen on the next page).
Phoneline 10M Integrated PC Card 9 Linksys HomeLink Series 8 8. W indows will f inish installing the software onto y our PC. Click Finish . 9. When asked if y ou w ant to restart your PC, remo ve the Driv er CD and click Ye s .
Linksys HomeLink Series 4. If you'd lik e others to be able to access the f iles on your PC's hard dri ve, select I w ant to be ab le to giv e others access to m y f iles . 5. If you'd lik e to share your printer with other users on the netw ork, select I want to be a ble to allo w others to print to m y printer .
11. Optional : Choose the Access Contr ol tab . Ensure that Shared-le vel access contr ol is selected. If the setting is on User-Le vel access control and you can’ t change it, skip to problem 6 in the T roubleshooting section. 12. Click the OK button.
15 Windows 2000 Installation & Setup Overview After ph ysicall y installing the Phoneline 10M Integrated PC Card in your computer , follo w these instructions to install the network dri ver .
17 Linksys HomeLink Series 16 5. The Driv er File Search Results dialo g box will appear . Click Next . 6. The Completing the F ound New Hard war e Wizar d dialo g box will appear . Click Finish . 7. Remo ve the CD from the CD-R OM drive. NO TE: W indows 2000 will not ask r equir e you to restart your computer .
19 Linksys HomeLink Series 18 6. On the Access Control T ab , User Level Access is selected, but Shared Level Access is grayed out and not accessible .
21 Appendix Sharing Y our Files and Printers Overview By sharing your f iles and printers, other PCs on your netw ork will be able to access the resources on your PC. Before sharing your f iles and printers, you should prepare y our computer to be used with an y f ile ser vers that ma y be on the netw ork.
23 Linksys HomeLink Series 22 InstalSharing Y our Files and Printersling the Driver in Windows 95 V ersion A The follo wing instr uctions are for W indo ws 98 or ME. T o star t o ver in W indows 2000, go to page 27. Starting Over in Windows 98 or ME 1.
25 Linksys HomeLink Series 24 6. When you ha ve completed the remo val of all unnecessary components, click OK . When asked to restart, click No . 7. Return to the W indo ws Contr ol P anel . Double-click on the System Icon. The System Pr operties windo w will appear .
27 Linksys HomeLink Series 26 Starting Over in Windows 2000 1. Click the Start button, choose Settings , choose Control P anel , then dou- ble-click the System icon.The System Pr operties window will open. 2. Choose the Har dwar e tab. 3. Click the Device Mana ger button.
29 Linksys HomeLink Series 5. Right-click on HomeLink Phoneline 10M Inte gr ated Adapter . A pop-up menu should open (belo w). 6. First, choose Disable . 7. When asked if y ou w ant to Disable the de vice, click Ye s . 8. Right-click on the HomeLink Phoneline 10M Integr ated Adapter again.
31 Linksys HomeLink Series 30 Model Number: PCM200HA Bus T ype: 32-Bit Cardbus Standards: HPN A 1.0, 1.1, &2.0 Compatible P or ts: T w o RJ-11 Standard Modular T elephone P or ts (Phone, HomeLink).
Contact Information F or help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Inter net addresses below . Sales Information 800-546-5797 (LINKSYS) T ech Support 800-326-7114 RMA Issues 949-261-1288 F ax 949-261-8868 Email support@linksys.
© Cop yright 2001 Linksys, All Rights Reser v ed. Printed in the USA. http://www .linksys.com.
デバイスLinksys PCM200HAの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Linksys PCM200HAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLinksys PCM200HAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Linksys PCM200HAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Linksys PCM200HAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Linksys PCM200HAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLinksys PCM200HAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Linksys PCM200HAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLinksys PCM200HAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。